Make Player 5 compliant clip containing NTSC SD video

My digital signage player accepts only Flash Player 5 compliant swfs. I have Flash CS4/CS5 so I set the publish settings to Flash Player 5 then try to export the clip I get an error message that what I am trying to accomplish is not possible. How can I embed a video in an swf and play it?
Peter Burn

try switching the menu encoding from software to hardware (or vice versa) in your DVDSP preferences and see if that makes a difference for you.

Similar Messages

In imovie 09 can you make one continuous clip

in imovie 09 can you make one continuous clip
canu u download video in HDV to imovie 06 from a SONY HDR-Fx 7 video camera as one clip

No. iMovie 09 (and 11) is designed to import movies from camcorders. Every time it detects a start/stop it will make a different clip. They will be in chronlogical order, rather than edited order.
If you still have iMovie 06, you can load the tape there as one continuous clip. Then EXPORT USING QUICKTIME choosing HDV as your codec. This will produce an MOV file that iMovie 09 or 11 can read, and which will be in the edited order.

Does Macbook really needs adobe flash player download in order to watch video clips on the web?

Does Macbook really needs adobe flash player download in order to watch video clips on the web?

Hello Angel8C,
Your MacBook Air running Yosemite will need an updated version of the Flash Player plugin to play web content that is in the Flash format (not all video content is Flash; there is also HTML5 video, amongst others). If you are being prompted to update your Flash Player plugin, you may find the following article helpful:
Adobe Flash Player updates available for OS X on March 20, 2015 - Apple Support
Sincerely,
- Brenden

Can i make a project with photo slideshows and videos mixed?

Hi, I just bought my mac yesterday, i'm new at everything then. I want to know if i can make a movie with photo slideshows and videos in between. For example, i would like to place all my photos and videos from a trip in chronological order, so when i click play there's going to be like ten photos, then a 2minute video, then photos again and so on... which program or application do you recommend for this?

I want to know if i can make a movie with photo slideshows and videos in between. For example, i would like to place all my photos and videos from a trip in chronological order, so when i click play there's going to be like ten photos, then a 2minute video, then photos again and so on... which program or application do you recommend for this?
Per your description, this should not be a problem from within iMovie '08. Adding slideshows created in iPhoto (contain "Tween" tracks that iMovie '08 doesn't like) or dropping too many photos on top of a single video clip (iMovie '08 can be touchy about initial placement of dropped photos) can, however, create potential problems.

Is there a way to make an audio clip not cover the whole project? I want to add audio clip or song and let it start at a certain point in the project. I'm working with iMovie on IPad!

Is there a way to make an audio clip not cover the whole project in iMovie? I want to add audio clip or song and let it start at a certain point in the project. Whenever I add audio or song it covers the whole project. I'm working with iMovie on IPad!

Thank you for your reply Karsten but unfortunately this didn't help me so far. Or maybe I'm missing something?
First the link is a tutorial for iMovie on a Mac. I'm using iMovie on iPad so the steps are inapplicable.
Second it is only possible for me to manipulate the end part of the sound clip to whichever duration I want. But I can't do the same with the 'beginning' of the sound clip.
I simply want to place some photos in the beginning of my video with no sound in the background then after like 2 secs I want to start the music clip. For some reason that is not possible! Cause every time I drop the music clip unto my project timeline it automatically place it self along with the first frame in the project! And consequently the photos and music are forced to start together.
Hope I'm making sense...

WMV3Server plays avi files containing WMV3/9 video and MP3 audio

WMV3Server
To play avi files with WMV3/9 video and MP3 audio encoding on Mac OS X as of 2005-01-24 you will need:
Mac OS X 10.2 or later
WMV3Server
Windows Media Player 9 for Mac OS X
An .avi file containing WMV3 video and MP3 audio.
Instructions:
Launch the WMV3Server java application and click the "Open" button.
A standard open-dialog window appears. Either navigate to the avi video file or drag the file into the open window to have the window switch to the folder that contains the avi video file. Select the file and click the "Open" button or press return on the keyboard. The open-dialog window should close.
Next, click the "Start" button. The movie will be cached and WMV3Server will display "Server Started"
Open Windows Media Player 9 for Mac OS X. Pull down the "File" menu on the menu bar at the top of the screen and select "Open URL..." Enter the following address:
mmst://localhost:1755/
Windows Media Player should connect, buffer and play.
The download page (in Japanese) for WMV3Server is here:
http://www.geocities.com/Tokyo/Bay/8128/
The download link is:
http://www.geocities.com/Tokyo/Bay/8128/WMV3Server-0.4.zip

Update: By playing around with the settings in the Default Applications preference pane (a free download) I somehow got the files to open automatically in QuickTime Player (with Flip4Mac WMV 2.0.1 installed) and they now play (instead of showing white video as they had previously. Unfortunately, I don't recall what I changed.
Here's a sample file (apparently a beer commercial.):
http://x500.putfile.com/videos/b7-19302161753.avi

How do I insert additional clips into my video timeline in Elements 13? When clicking 'add media' it added the clips at end of video rather than in their appropriate position. Could not 'cut and paste'.

How do I insert additional clips into my video timeline in Elements 13? When clicking 'add media' it added the clips at end of video rather than in their appropriate position. Could not 'cut and paste'.

bhsleadership
I am in the process of preparing to test a sample from your brand and model camera in my Premiere Elements 8.0/8.0.1 on Windows 7 64 bit. I will have the results probably tomorrow morning.
For now I just want to put you through the drill that I do for anyone who says he/she is using Premiere Elements 8.0/8.0.1.
1. Are you working from the 8.0/8.0.1 Update of the program?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4653
2. Do you have the automatic Background Rendering and AutoAnalyzer features turned OFF.
For Background Rendering option. See Edit Menu/Preferences/General.
For AutoAnalyzer option. Click on Organizer in the row below the blue active Organize header in order to open the Elements Organizer. In the Elements Organizer workspace, go to Edit Menu/Preferences/AutoAnalyzer Options and disable all the AutoAnalzyer options. To return to the Premiere Elements workspace from the Elements Organizer workspace, in the Elements Organizer workspace, go to File Menu/Exit.
Is your computer optimized in spite of the fact that you have a high end laptop? I presumed so but always go to verify, no pile ups of preview files, conformed video and audio files et al.
Looking at the properties of your source media, I see:
video compression = MPEG1
audio compression = MPEG-Layer1 (.mp2)
Frame Size = 640 x 480 (4:3)
Pixel Aspect Ratio = 1.0
Frame Rate = 30 progressive frames per second
With properties like those you are sure to get a red line over that content since there is no project preset with that description.
But, your choice of the default NTSC DV Standard would have been mine also.
I am heading to try to get a quick look at the behavior of the sample video here in my Premiere Elements 8.0/8.0.1.
To be continued.
ATR

(bug?)Movie clip contains an object with a z value will not edit the object in place, it goes into a seperate window.

When a movie clip contains an object with a z value, I can not edit the object in place, it goes into a seperate window.
This changes the vanishing point relative to the movieclip instead of the stage (allong with everything else).
This makes it very hard to keep track of where the movieclips will end up when actualy playing the animation.

I should have explained my situation a little better. I have a machine that's made up of a number of parts, some of them are fairly large and some are quite small. When a user clicks on a part, I want to center that part on the screen and then move whole machine toward the screen until the selected part either fills the screen (for the larger parts) or the part bumps up against the front clip plane (for the smaller parts).
I didn't think of checking for a collision with the ViewPlatform's TG, thanks for mentioning that. I wasn't sure how the ViewPlatform's location relates to the clipping plane, but I'll dig into it. I'm still learning how the ViewingPlatform, the image plate, and the clipping planes all relate to each other.

How do I make transitions between clips smooth?

how do I make transitions between clips smooth? Right now, when I play my video in imovie, the clips freeze or jump between clips.

Have you tried sharing the final movie using the Share menu, or, alternatively use FILE/FINALIZE PROJECT?
The final product shouldn't have any lag. iMovie itself should not have any lag, but could depending on your Memory and hard disk configuration.

How can I make a slideshow in iPhoto into a video on an iPad 3?

Been trying to find a way to make a slideshow in iPhoto into a video. Is there a way to do this?

You can avoid the Ken Burns effect, but it would be a lot of work:
See: http://help.apple.com/imovie/ipad/2.0/index.html#knac3eec39c6
If you don’t want the Ken Burns effect applied to a photo, set the image position and zoom level to be the same for the start and end points.
Adjust the movement of photos with the Ken Burns effect
iMovie applies the Ken Burns effect to the photos you add to your project. With this effect, the camera appears to sweep across and zoom in on the photo. If there are people in the photo, iMovie uses face detection to keep faces within the viewing area.
You can adjust the Ken Burns effect so that the motion starts and ends on the parts of the image you specify.
In the timeline, tap the photo you want to adjust.The Ken Burns effect controls appear in the lower-right corner of the image in the viewer.
To set the way the photo is framed at the beginning, tap the Start button .
Pinch to zoom in or out, then drag the image in the viewer to frame it the way you want.
To set the way the photo is framed at the end, tap the End button .
Pinch to zoom in or out, then drag the image in the viewer to frame it the way you want.
To close the controls, tap the Ken Burns Effect button , or tap outside of the clip.
If you don’t want the Ken Burns effect applied to a photo, set the image position and zoom level to be the same for the start and end points.

How to make a text clipping of a URL?

Normally, if you select some text and drag it to the desktop, it makes a little clipping file, which you can open and copy easily. But if the selected text is a URL, with "http" in front it it, the dragged text is turned into a ".webloc" file which, when double-clicked, opens a web page. Does anyone know if there's a way to force a piece of text that is a URL to become a clipping when dragged to the desktop, rather than a webloc file?

If you are using Safari you can select the URl then go the services under the Safari menu at the menu bar, scroll down and select Text Edit and then select New Window Containing Selection and the URL will be saved as a Text Edit file completely intact, nothing to add. Takes about 2 seconds.
Well, yes, but then I'm back where I started. I don't want a great big TextEdit document just to hold a few words of text that I want to have easily available for copy/paste. I want a text clipping, which is (1) small and (2) easy to use: just double-click it and press cmd-C (no need to select anything, in fact you can't), then paste wherever desired. Interesting that this procedure creates a new TextEdit .txt file, even though I have it set in Preferences to make new files .rtf.
Anyway, it seems there's no way to do what I wanted to do. You get a text clipping (".textClipping") file when you drag selected text to the desktop, and apparently when the Finder sees the text has "http://" at the beginning, it assumes you want a .webloc, and makes that; it's not a function of whether the text is dragged from a browser or another app, it's just what the Finder sees in it. So ClipEdit is the solution; it can create a text clipping as a new document, with whatever you want in it. I also put the URL I want to use often (i.e. put into documents, not use as in go to that address) into iSnip, which unfortunately seems to have ceased development.
PowerBook G4 17" 1.5GHz Mac OS X (10.4.8) 1GB RAM, 80GB HD, DVD-RAM SuperDrive

How to make the audio track independent from the video track?

Can someone remind me how to make the audio track independent from the video track? My memory just went blank. Must be the age.
Thanks

Hi -
Select the clip in the timeline.
Type Command + L or go to the menu Modify > Link to toggle it off.
MtD

Flash player 11.3.300.257 plays video too fast

Hi
I have just updated to the lastest version of flashplayer 11.3.300.257. Now, all vidoes in youtube and bbc iplayer etc that use flashplayer run very fast and without sound (just like fast forwarding x4).
I am on Windows Vista Business Edition (all updates included)
Browser is IE9.
I have tried a clean reinstall of flash player a number of times but same issue.
I have cleared caches and deleted all history etc via the advanced section of the software.
I have also removed the hardware acceleration. Nothing has helped.
However, if i run in "safe mode" it seems to run at the correct speed. I have uninstalled all recent software updates (such as skype) but still the issue remains. Is it likely to be a conflict issue?
I have tried to install a previous version of flashplayer from the archives page but get an error message 1722.
Can anyone help?
Nigel

For my reference, here's the bug:
https://bugbase.adobe.com/index.cfm?event=bug&id=3217331 - Flash player 11.3.300.257 plays video too fast
In order to get traction on this, they're going to need to be able to reproduce it.
It would be great if you could do two things:
- Provide direct links to a couple videos that reproduce this problem.
If they're on different sites, and based in the US, even better. (Geographic restrictions make it hard to troubleshoot. We can VPN, but that can mask/introduce network and timing problems.)
- Provide the output of dxdiag.exe
Go to Start > Run > and type "debugdiag" no qoutes, then hit [Enter]
Save the output and attach it to the bug above.

How do i get the adobe flash player so i can watch youtube videos?

how do i get the adobe flash player so i can watch youtube videos?

Software is always safest directly from the developer or the App Store.
There are numerous untrustworthy 'update' sites like Cnet & Softonic, & many users won't know that one is to be trusted (so far) but not most of the others.
Adobe make Flash Player : get it from Adobe.

Export clips of a longer video

I imagine this is a very simple task with a simple solution but I cannot seem to find it ...
All I wish to do is take a large video (50 minutes long) and export small clips of this large video into separate files. I have split the clips how I would like to see them in the project library, but when I got to export It wants to export all the clips as one video file, and I can't find any other options.
How can I just export a segment of the video?
Thanks

There are two ways to do this, depending on where you start.
1. Make separate projects. Drag the short clips you want from in event into a new project.
2. If your clips are already in a 50 minute project, go to the Project Library view. Right click on the Project name and select "Duplicate". Repeat as many times as you need. You can give these duplicates new names if you want. Then delete the portions you don't need, so that only the clips you want remain.

Make Player 5 compliant clip containing NTSC SD video

Similar Messages

Maybe you are looking for