Make portal instance anonymous with WPC content

Hello,
We have portal instance running our intranet site. Currently we allow user to access this by login to it using LDAP authetication mechanism.
Our plan is to make it Anonymous. But we also have Wep Page Composer content and for that we want user to login first before editing any page.
So basically we want anonymous instance but allow login for editing WPC pages.
We are using Portal 7.0 SP16.
Thanks for your help/suggestion.
regards,
Jaish

Hi,
and where is the problem?
You'll have anonymous content and the WPC role is only assigned to a user / group.
br,
Tobias

Similar Messages

  • Using Desktop Filter IDs with WPC Content

    Hi All-
    I'm migrating our 7.0 WPC content to Portal 7.31 and have run into an issue with one of our roles. We have a desktop that uses Filter IDs to control the entry points. When I create a connection to a WPC area inside this role, and add the filter ID to the connection the WPC Area content does not show in the navigation. If I add a new folder to the role as an entry point with the filter ID, then add a WPC connection to that folder the folder shows in the navigation but the WPC content does not render. The error is "
    Page not found. Refresh the page or try again later. If the problem persists, contact your Portal administrator for assistance.
    Here are the scenarios I tried:
    #1:
    Role
    >New connection to WPC Area (set as entry point and filter ID assigned)
    [no navigation node gets displayed here]
    #2:
    Role
    >New folder (set as entry point and filter ID assigned)
    >>New WPC connection (not set as entry point)
    [folder displays in navigation but errors on WPC content]
    #3:
    Role
    >New folder (not set as entry point but filter ID assigned)
    >>New connection to WPC Area (set as entry point and filter ID assigned)
    [no navigation node gets displayed]
    Can someone tell me how to accomplish using filter IDs with WPC content?
    thanks in advance.
    Tim

    It turns out this has nothing to do with the FilterIDs. The fix is to assign end user permissions on the Area in Area Management. Once that is set the role that contains the filterID works as expected.

  • Create Portal Page Design with Dynamic content in Moss2007(without using Visual Studio)

    Hi All,
    I am facing a issue while designing a page in MOSS 2007. I can't use custom code as the client doesn't want it to be used.
    The page is with dynamic content coming from sharepoint lists and picture library. I tried using SharePoint Listview after adding zones as per my page design..but was unsuccessful because I am unable to change its design and css styles in its xslt view.
    Plesae help me to find any alternative so that I can easily style my page with the dynamic content. Is there any way using Content editor webparts? Can we get List data in Content editor html as this can be easily styled. I googled and tried it by using javascript
    and jquery but again unsuccessful.
    Please help me with some solution.
    Thanks..!!

    I recommend your repost this in the WebLogic Portal forum.
    WebLogic Portal

  • How to Make a 1 DVD with the content of 2 DVD's?

    I have a project that rquires to re-edit the content of 1 DVD to spanish, and also add the original English DVD material into this new DVD, how do I create 1 DVD from my normal Encore project and and the other files from the English Version Disc, which by the way has links, PDF's, and Ineractual Player Auto Start stuff. I'm using Encore CS3, but I just downloaded CS4 on a PC XP. Thanks for your help.

    Thanks for the reply. I'll respond to your questions...
    I have a DVD (movie not ROM) with a 30 minute safety video in English. The DVD has an incredible amount of links that go from one menu to another to another, it's the most confusing and elaborate menu/chapter I've ever seen, well my customer wants me to translate it into Spanish, but now he told me he wants the English AND Spanish version to be in one disc. That's the problem. I can capture the movie. I can translate the script and do the Spanish voice over (just like in the old karate movies) I can create the new menu pages in Spanish and I can create the intricate links, so what do I do with the English version? I can't create the whole English version again, more like I don't want to is there another easier option?
    Once I create the new Spanish project using Encore CS4 I don't know how to prompt Encore to attach the English DVD content with all the functionality of menus, chapters and links. I can attach movies, assets, etc. Can I attach anything else? This is what the DVD has inside:
    16 objects: 1.45 GB
    Video_TS folder
    Audio_TS Folder
    Average_files folder
    Common folder
    Good_files folder
    Poor_files folder
    Win folder
    Autorun File
    Average HTML document file
    Disc.id ID file
    Good HTML document file
    IG87 Word Document file
    Install InterActual file
    Poor HTML document file
    Poster PDF file
    Readme TXT file
    > Interactual Player is a file that the past DVD creator used to help the viewer go from Laptop video to web pages, etc. really annoying since you have to download to your hard drive as soon as the DVD starts.
    Thanks for your time.
    VDOMSTR

  • Want Portal Table Names with Page/Content Area Names

    Which PORTAL30 tables have info on the OWNER, APPLICATION, PAGE,
    and CONTENT AREA for each of these objects (display names as
    well as internal names). I need this to generate a script for
    often-run portal export/imports. Thanks.

    Yuk,
    It sounds like you might have changed your configuration (Java path or something?) during the installation. It would be best to ask this question in the PDK forum.
    Rich

  • How do I make sidebar div move with the content div in Firefox 14?

    Hello,
    The sidebar div blocks the content div in Firefox 14 when the browser window is resized smaller. In other browsers, this is not a problem.
    The website url is: www.gaddislaw.com
    Thanks for your help!

    I assume you want the main content text to be 'flexible' i.e., narrow and widen when you alter the size of the browser window. If so amend your 'content' css to as below:
    .content {
    padding-top: 25px;
    padding-bottom: 10px;
    margin-left: 290px;
    margin-right: 40px;

  • Problems with Pcd Content after restore EP Portal with online Backup

    Dear Colleagues,
    We have problems to show Pcd Content (Browse and Search) of the Content Administration tab of the EP Portal after restore with a online Backup during Disaster Recovery Test.
    Restore has become on a mirror system of Production environment. Ours EP Portal is a cluster system with the following configuration:
    Production landscape:
    Node 1
    Disk K:\ SAP SCS directory. (Clustered)
    Disk E:\ SAP Central Instance directory (Local)
    Node 2
    Disk E:\ SAP Dialogue Instance directory (Local)
    Disk M:\ SQL Datafiles. (Clustered)
    Disk L:\ SQL Logfiles. (Clustered)
    Disaster Recovery landscape:
    Only a Node
    Disk K:\ SAP SCS directory. (Clustered)
    Disk E:\ SAP Central Instance directory (Local)
    Disk M:\ SQL Datafiles
    Disk L:\ SQL Logfiles
    Portal Version
    J2EE Engine = 6.40 PatchLevel 105424.313
    Portal = 6.0.18.0.0
    After restore, the data base as the SAP application starts
    correctly but when logon in the Portal, the Pcd Content of Content Administration tab
    and to other tabs with similar information is not shown.
    After restore it can be necessary to reactivate some type of configuration, links, etc?, for this type of restore is better to make a backup offline instead of online one?
    We are thankful for any information on the matter.
    Thanks,
    Regards.
    Rafa R.R.

    The issue was solved with a offline backup.

  • WPC content for anonymous user

    Dear SDNites
    We have recently started a project in which we are using Web Page Composer(WPC) for web content development. We have configured the WPC content for anonymous users. After the configurations, anonymous users could access this content without entering any user id and password. But after the restart of the portal, it started prompting login screens even for the anonymous users.We have checked all the required configurations and these seem fine to me. Can you please help me on how to resolve this issue?
    Best Regards
    Pavan

    Hi Pavan,
    Please refer to this thread.
    https://forums.sdn.sap.com/thread.jspa?threadID=948170&tstart=0
    https://www.sdn.sap.com/irj/sdn/thread?threadID=943740&tstart=150
    Hope this helps.
    Cheers,
    Sandeep Tudumu
    Edited by: Sandeep Tudumu on Jul 7, 2008 10:22 PM

  • WPC Content showing error after portal upgrade to 7.3

    Hi All,
         Recently we have upgraded our portal from 7.0 to 7.3.We have WPC contents on our portal its was fine till upgrade.After upgrade we are facing issues in all the WPC content.I reproduce the issue and checked the NWA log i could see the below logs.
    com.sapportals.portal.prt.runtime.PortalRuntimeException: There is no portal component associated with the following context: pcd:<PCD PATH OF THE IVIEW>
    So i thought of creating a new contents as mine was simple but when i navigate to the Web Page Composer ->Web site Management.I could see only the link not the content when i click.Below log i could see after this
    cannot find bundle file or key for resource type wpc_site_root, use fallback
    No mapping available for requested LayoutController with alias <WpcNavigationLayoutController>
    com.sapportals.wcm.WcmException: Error: Archiving Service isn't available
    at com.sapportals.wcm.rendering.uicommand.cm.UIAbstractApproveRejectArchivingCommand.setArchivingService(UIAbstractApproveRejectArchivingCommand.java:162)
    at com.sapportals.wcm.rendering.uicommand.cm.UIAbstractApproveRejectArchivingCommand.<init>(UIAbstractApproveRejectArchivingCommand.java:42)
    Kindly help me to solve the issue.
    Naga

    << Do not post the same question across a number of forums >>

  • Cannot view content of pages created with WPC

    Hello everyone,
    When I create a page with WPC, I can only view the content with my super admin account.
    I have set read authorizations for everyone on the KM folders and for PCD with no result. The rest of the users cannot view the content. They can only view the Header or Tool bar at the top (which contains send feedback, email, rss feed, etc).
    What must I do to make the content visible for everyone?
    Best Regards,
    David.

    Hi Leo,
    Thanks for the answer,
    Set permission "everyone" in the folder "System Administration > Permissions > Web Page Composer", but still can not view the contents of the iview.
    Another additional configuration?
    Thankss
    Regards.
    David

  • Wpc content in KM tab in portal

    HI
    when i am working with webpage compsoser in order to create a website i have enabled wpc_editor_role but inside the website management i could see nothing. Instead i did not find any wpccontent in teh KM content tab
    Can anyone please let me know how do i get wpc content in KM tab.
    Regards...

    Dear Krishnakk,
    You can find the Web Content folder under KM tab for the WPC.
    Please refer to help.sap.com for more details. [Click Here|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/45/3fe7b4f34d4a18e10000000a114a6b/content.htm]
    Best Regards,
    Arun Jaiswal

  • Unable to refer to custom resource bundle in WPC content rendered with xslt

    Hi,
    I need to use the resource bundle messages inside WPC content.
    When rendered by standard xsl templates the  call to XSLTHelper class is done to retrieve message from the standard SAP resource bundle com.sap.nw.wpc.bundles.core.properties, like this:
    <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
                         xmlns:wpc="com.sap.nw.wpc.km.service.editor.hslt.XsltHelperCore">
    <xsl:value-of select="wpc:getString([key defined in sap bundle], string(/document/@locale))"/>
    The problem is that helper class doesn't provide any API to use custom bundles.
    I tried to create xslt helper (including config in KM), but that didn't succeed neither. It would return with error NoClassDefFound.
    Could you please help on configuring xslt helper and registering it with xslt rendering engine for Web Page Composer? I could not find any how-to guides on xslt helpers for WPC.
    Thanks in advance.
    Ruslan

    Hi
    Did you find a solution?
    Christof

  • Create multiple portal instances with only one database?

    Can someone create multiple portal instances with only one database?
    If so, how is this done, just by running the portal configuration wizard?
    How are most people running with multiple developers working on portal? Do they share a portal instance, or create their own?
    Thank you very much!
    Phillip

    i'm currently using 9ias rel 2(9.0.2) and i have install one infrastructure and two mid tier, hoping that this will create two portal, but it didn't. Can you please tell me how to do create two portal within one server.
    thanks and regards;
    andrew

  • Portal with multiple content providers

    Hello,
    Tools 8.52
    App Version 9.1
    We have Portal consuming mulitple PS applications like ELM, HCM, CRM.
    And we are imporiting the entire registry structure of all the applications.
    So we will end up importing PLs, Roles and User Ids.
    My question is what will happen if we have same role name or Permission list name in two databases HCM and ELM.
    Say the customer defines role saying Manager in HCM and ELM both.
    What is the best way to manage such conflicts?
    Thank You.
    Best Regards,
    Ekta

    Content references and PLs are copied by Application designer projects from Content Providers to Portal.You could copy Content Reference using Application Designer, but you should me careful when doing this across different applications.
    Applications have different parent folders, content reference has permissions that are application specific, which to not have to exist in the target environment.
    And especially Portal works different from the other applications.
    Portal, said very easily, "has no own application", but is used to link to content references to other applications.
    You should really set up Content reference in Portal manually, that's why Unified Navigation was introduced.
    Why you should set it up manually and not copy via application designer:
    Content reference in for example HCM is usually configured on LOCAL_NODE.
    When you copy this across to Portal, Portal will interpret this a link to the Portal application.
    This has to be changed in Portal to the local node of HCM, for example PSFT_HR.
    Content reference have permissions set, usually deviated from the permission lists on components using the Portal Security Sync process.
    Permission to a component is/could be different than permission to the content reference that references the component.
    One is, can I see the menu link, other is, do I have access to the page.
    And is exactly what you should do with Portal in junction with other PeopleSoft applications.
    Portal has only permissionlist to content references (menu links) to components on other Applications nodes.
    On the other application permission list on the actual component has to set.
    So userprofiles and assigned roles will have to synchronized across applications user the USER_SYNC service.
    Roles in Portal and and other applications have to exists, but do not need to have any permissionlists in the Portal environment.
    Suppose you have a user in HCM with roles and within the role permissionlist to components.
    The same user will be synced to Portal, the user profile will be copied and assigned roles will be copied.
    Now Portal needs to have roles/permissionlists to the content references in Portal that link to the HCM component.
    These permissionlist in Portal can be other than the ones in HCM.
    Hakan

  • What would the code be to make the sidebar even with the main content at the bottom?

    Can anyone tell me what code to use to make the sidebar even with the main content at the bottom.  I am using CSS.  I am guessing the height would be auto, but can't figure out how to do it. Any help would be greatly appreciated.  Thanks.

    Equal height columns are simple with Tables.  But CSS divisions don't behave the same as table columns so you need to use a script or trick the eye with a repeating background Image.
    See image below:
    See working demo
    http://alt-web.com/TEMPLATES/3-col-white-gray.html
    CSS code:
    #container {
    width: 900px;
    margin : 50px auto;
    background: url(../Images/BG/3-col-wht-gry.jpg) repeat top;
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb
    www.alt-web.blogspot.com

Maybe you are looking for