Make report print its result in one page twice

Post Author: zecox
CA Forum: Crystal Reports
I
have a report, it generates result and I can print it out normally.
The result takes up half of the page. What I want to do is to make the
result repeat itself in empty bottom section. Does anybody have a clue
how can this be accomplished. Thank you for your reply in advance.

Create a blank report but don’t connect it to a datasource.
Insert your existing report as a subreport in the detail section of blank report.
Insert another detail section and insert your subreport again.
In the blank report create the parameters that you will need to pass to the subreport.
Map the parameters from the blank report to your subreports.

Similar Messages

How to make report high 3.33 inch per page(11g report)

Dear all,
How to make report high 3.33 inch per page
so if there are more than one page in the report it will start printing in the correct position on the next page,
i make generate to PDF then print
Thanks,
Sakr

Hello Sakr,
This is a good question:
You can visualize:
http://1.bp.blogspot.com/_KYY-OV98iIo/S4-7ISbC5NI/AAAAAAAAAGw/bmelGzNg6UI/s1600-h/MainSection.bmp
You can change Height that shows 11 in the visual aid.
Mark Correct or Helpful !
Edited by: New Yorker on Aug 26, 2011 11:40 AM

How to print all columns in one page

Hi,
Can anybody explain me how to print all columns in one page.we have around 15 to 20 columns for 4 reports and all these reports are build on one multiprovider.we are using BW 3.5.
Can anyone explain me how to print ALL COLUMNS IN ONE PAGE .currently they are getting all columns in 2 to 3 pages. They are using PORTAL to run the reports here.
Is it possible to do by customizing Webtemplate or by macros in Workbook.Please help me
Edited by: kotha123 on Oct 11, 2010 5:58 PM

Hi,
Your best bet is to use a workbook template or else Excel to pdf option...Thanks

How to print two voucher in one page?

HI,
we want to print two voucher in one paper. what are the steps to be taken in sapscript? is it purely relted to SPAD?
Regards,
lijo Joseph

hi joseph,
i'm not sure how related this would be to your concern, but in my place, we've implemented that by sizing a voucher as half a page, so that when we print vouchers, the printer would know that one page is half of a regular page. SPAD is one place to fix, but the actual printing program and SAPScript was also customized so that it would send two vouchers for printing consecutively, and would fit in one page.
ryan.

How to print 20 lines in one page and remaining lines in another in script?

Hi I created 2 pages in script for page1 next page is page2 , how i can print 20 lines in one page and remaining in next page plz send me the code for that and is windows same for 2 pages?...

Hi Krishna,
Try below code...
    CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      form                              = form.
    CALL FUNCTION 'START_FORM'
    EXPORTING
     language               = sy-langu
     startpage              = page1
LOOP AT itab.
    count = count + 1.
    item = count mod 20.
    IF item EQ '1' AND count NE '1'.
       CALL FUNCTION 'END_FORM'.
       CALL FUNCTION 'START_FORM'
       EXPORTING
         language               = sy-langu
         startpage              = <b>page2</b>
    ENDIF.
   "write_form statement ....
ENDLOOP.
Message was edited by:
        Hikaruno

Printing multiple photos onto one page

Sorry, fairly new to PSE9!
Have a group of photos I need to print to actual size (3cm x 4cm) to go into a photo frame. They are all cropped and ready to go but there doesn't seem to be an option to print multiple images onto one page at a custom size? A contact sheet only gives me the option for the number of columns and picture package doesn't give any such option either as far as I can see! I'm sure I must be missing something here!
Any help much appreciated! Don't want to waste photo paper printing each small photo individually!

http://www.elementsvillage.com/forums/showthread.php?p=206785#post206785
Post #6 in this thread provides standard directions.

Print Detail Lines on One Page?

Hi Friends
I am creating xml template for Printed Purchase Order Report in Potrait Style.
If the Detail Lines are more than 2, the third one is going to next page.
I want all the Information Including Header and Detail LInes to be printed in one Page( as the Ever Green Output )?
Any help on this.. where to set the Table or row Properties or any code to be added?
Let me know
Thanks
Ravi

Hi
I played with table and row properties.. i got my desired result
Thanks
Ravi

How to print two sides with one page?

I have a PDF that is one page long and I'd like to print the same thing twice (front and back) on one page. Can I do that?
I've tried printing two copies with the printer set to double-sided, but it just printed two sheets with one side on each sheet.

Well sure; Go back to the authoring application that created the documents and do a 2-UP page. Make the existingg page large enough to accomodate the extra content. Is that what you're asking or do you really mean print to a printer with a back up ? In that case just flip the page over and print page 2 on the other side.
Or are we missing something ?

How to print multiple copies on one page ?

How to print multiple copies of one document on one page ?
in coreldraw I used to make the document -for example a business card 5x9 - and when sending to print it automatically placed the number of cards that would fit in my A4 sheet.
how do I make the same operation in Indesign.
thanks

Hi, Peter S.
>I can see that as a shortcut to printing a page of different cards for multiple people, but to do a simple n-up of a single card it seems overly complex to me. What am I missing?
* It's just an alternative to copy/paste and step/repeat.
* For a one-time only use, perhaps it's a little more complex than necessary. But for any future needs, only the content of the data file needs to be changed, either by editing, or by pointing to a new data file. If different cards for multiple people becomes necessary, it's ready to go.
Regards,
Peter Gold
KnowHow ProServices

How do I make a long table fit on one page?

I do a community newsletter, one page of which is a directory of residents. On this page, I have a table with 3 columns: name, address, and phone. There are 61 rows, which is too big to fit on an 8 ½ x 11 page. As people move in and out, I need to be able to change the name for the particular address and re-sort by name. Retaining this ability, how can I make this fit on one page? Ideally, I would be able to "break" the table into two parts of 30/31 rows each, with each part side by side on the 8 ½ x 11 page. I can't find a way to do this. Any help would be appreciated. I am working in Yosemite 10.10.1, and Pages 5.5.1. I have also created a Numbers 3.5 version of this table, but still cannot find a way to do what I want to do.

Hi Saundra,
Do you have to print it, or are you sending this out via E-mail/PDF?
The fix below, should work, either way:
If you are actually not printing it, and are E-mailing/posting online, Export as PDF, and E-mail address will still be active...
If it must fit on a smaller page, for printing or for whatever reason, drag the aforementioned PDF into a 8.5 x 11 document, open Inspecter to Metrics, click to not constrain proportions, resize to fit then Export again as a PDF. The E-mail addresses will remain active. Here's screenshot of one with 61 rows, I made in less that 2 minutes as a mock-up. Links/E-mail still works.
Luck!
Lena

How to Print two layouts into one page

Hi,
I have developed a report by blocked ALV.In this report i have created two blocks.
But when i give print out the two blocks are not printing continuously.It is displaying one block in one page and another block in anther page.
And i need page number at end of each page.
Please provide me solution for this.
Thanks & Regards
Venkatrami Reddy B

OOPS OO ABAP
http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
Reports
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
Rewards if useful.........
Minal

Printing JPanel to fit one page, Urgent (thanks for help)..........

hi all,
I am trying to print and can't get the right scaling. My problem is if the JPanel that has lot of images inside it is too big to come on one page width and height then I want the print out to be on one page. If my panel's height is too large to fit on one page and the width is only half of the page or less than page half of the width. Then I want to scale it's height only to fit on one page while keeping the width the same during printing and the images also to be scaled accordingly. And if my height is too small lets say less than half the page and the width is too large too fit on one page then in this case I want to print the original height or keep the height to be shown on the printout as it looks on the screen but scale the width to fit on to one page and the images also to be scaled accordingly. But my following piece of code doesn't honor this though it fits on one page. It keeps on increasing the width or height to fit the whole page thought the width or height is less than that and the images are also expaned accordingly. I want to scale the images too and only fit the width or height if any is greater than one page. Any help is really appreciated. Thanks in advance
RepaintManager.currentManager(panel).setDoubleBufferingEnabled(false);
//Creates and returns a PrinterJob.
PrinterJob printerJob = PrinterJob.getPrinterJob();
Book book = new Book ();
PageFormat pf = printerJob.pageDialog(printerJob.defaultPage());
int pagecount = this.calculatePageCount(pf);
book.append (this, pf, pagecount);
// set pageable
printerJob.setPageable(book);
if (printerJob != null && printerJob.printDialog())
try
//this print() method implements the Printable interface
printerJob.print();
catch (Exception e)
e.printStackTrace();
public int print(Graphics graphics, PageFormat pageFormat, int pageIndex) throws PrinterException
if ( pageIndex >= 1 )
return NO_SUCH_PAGE;
Graphics2D g2 = (Graphics2D)graphics;
// leave room for a page number
double pageHeight = pageFormat.getImageableHeight();
double pageWidth = pageFormat.getImageableWidth();
double scaleFactorH = (panel.getSize().height)/(double)(pageFormat.getImageableHeight());
// set the clip to the size of one page
g2.setClip(0, 0, (int)pageWidth, (int)pageHeight);
// translate down the graphics object to the top of this page
g2.translate(0f, -pageIndex*pageHeight);
// scale to fit the width
g2.scale(scale,1.0/scaleFactorH);
panel.paint(g2);
return PAGE_EXISTS;
//method to calculate
public int calculatePageCount (PageFormat pf)
double pageHeight = pf.getImageableHeight();
double pageWidth = pf.getImageableWidth();
double componentWidth = panel.getSize().getWidth();
System.out.println("THe imageable width is " + pageWidth);
if (componentWidth > pageWidth)
scale = pageWidth / panel.getWidth();
double componentHeight = panel.getSize().getHeight() * scale;
printPageCount = (int)Math.round(Math.ceil (componentHeight/pageHeight));
return printPageCount;
Is there a way to fix this any help is appreciated.
Thanks

Dear Nadia,
Thanks for the info.
If I understand it correct I can make a copy of my actual css file.
Rename it this copy to e.g. print.css
And then make some changes such a letter fonts and colour
Linking this css file to my pages and specify it is only for `print1`
Right?
I`m using a template so if I amend the template like this and have all pages updated automatically that should do the trick?
Right?
Is there somewhere where I need to mention that e.g. the page needs to be reduced onto 95% by printing?
Or will the print.css do the trick?
Sometimes I get confused on what css can do and it can do a lot.
Many thanks for helping me out here.
Kind regards
martine

Make my own template for a one page book?

I need to make a book template that will appear in the list of possible book designs -- is that possible?
Secondly -- I want to make a one-page book (call it a poster if you want) it's really a form that I want to print out with a different photo each time. It's actually a casting form/release for models. I want to be able to shoot a tethered photo of model, put it into a one-page form which already has a model release in it and print it out so they can sign it.
I have not been able to work with any of the existing templates because they won't permit me to reduce the number of pages to one or two. (sure I can always just choose to print one page, but I want to keep all this as simple as possible as it will be casting assistants or studio assistants doing this).
So my questions are:
1. Can I create my own Aperture book template?
2. Can I create a template that is only one or two pages?
3. Can I enter the model's name, email, phone, etc in metadata and have that print out as a release form for them to sign?
4. Can I use Automator to make this a "push the button" operation?
Many thanks and open to all suggestions.

Never mind. I figured it out already. Can turn off page numbering from the pop-up menu on "book action". Should have just the manual. Thanks.

Spool print with more than one page doesn't work

Hi Experts,
I need some help.
I have following code in my report:
SORT ta_ausgabe BY vstel vkorg_auft fkdat.
NEW-PAGE PRINT ON .
   LOOP AT ta_ausgabe INTO wa_ausgabe.
     READ TABLE ts_vstel
       INTO wa_vstel
       WITH TABLE KEY spras = sy-langu
                      vstel = wa_ausgabe-vstel.
     READ TABLE ta_vkorg
       INTO wa_vkorg
       WITH KEY vkorg = wa_ausgabe-vkorg_auft.
     WRITE: wa_ausgabe-vstel.
     WRITE: wa_ausgabe-vkorg_auft.
     WRITE: wa_ausgabe-fkdat.
     WRITE: wa_ausgabe-matnr NO-ZERO LEFT-JUSTIFIED,
       AT 30 wa_ausgabe-maktx NO-ZERO LEFT-JUSTIFIED,
       AT 70 wa_ausgabe-fkimg NO-ZERO LEFT-JUSTIFIED,
       AT 79 wa_ausgabe-vrkme NO-ZERO LEFT-JUSTIFIED.
     NEW-LINE.
   ENDLOOP.
   NEW-PAGE PRINT OFF.
   COMMIT WORK.
   v_spool_attach = sy-spono.
As you see the information of the table TA_AUSGABE will be just prined into spool. When I have only information for one page everything
work fine, but as soon there more information to be printed I cannt open my pdf file with the spool info anymore.
What could be a reason?
Please urgent
BR
Denis

Hi Denis,
The code works for me for printing more than 1 page.
Pls try giving the spool id manually in report RSTXPDFT4 and see whether it gets Multi pages in pdf and let me know if you have any issues.
Rgds,
K.S.

Print multiple photos on one page to printer

I am new to macs, and I can't figure out (using iphoto 11) how to just print multiple photos on one piece of 8 1/2 X 11 paper in my own printer at home. I want to choose the size of each picture (like one 4X6 and two wallets on one page. How do I do this? it seems I can only print one pic per page when I use the print function in iphoto. Please help! If i can't do this basic thing I feel like I just wasted a couple thousand dollars on a really expensive piece of junk.

This is a detailed set of instructions I made for my mother to use. Hope it helps.
To print single or multiple photos in iPhoto
Open iPhoto
If photo(s) are not already in iPhoto then dragand drop into iPhoto
Locate photo(s)
Select (highlight) photo(s)
Click File
Click Print
New window pops up
Select border type on left side (standard, etc.)
Select Print Size at bottom right (2x3, 3x5,etc.)
Click Customize
New window opens
On bottom right are new icons
IGNORE Print settings -are the options you chose in steps 7a, b & c
IGNORE Themes - is thesame as step 7a
IGNORE Background –ignore in most cases
IGNORE Borders –default is 1 (use default in most cases)
Layout (select 1 or 3 in most cases)
1is horizontal photo
IGNORE 2 is horizontal photo with text below
3is vertical photo
IGNORE 4 is vertical photo with text below
SettingsClickon Photos per page
If you want only 1 copy of each photo you selectedon each page then choose Single photo per page
If you want 2, 3 or 4 different photos on eachpage then choose Multiple photos per page
If you want many copies of the same photo oneach page then choose Multiple of the same photo per page
ClickPrint on the bottom right
Newwindow pops up
If the arrow (triangle) to the right is pointingdown click it so it points up and displays additional options
Choose number of copies (pages to print)
ClickPrint

Make report print its result in one page twice

Similar Messages

Maybe you are looking for