Make slideshow in iDVD6: 'manual' option not avail. in 'slide duration'
In iDVD6, the 'manual' option is not available (it's "greyed out") when I look to choose 'manual' in the "slide duration" pull-down menu. I CAN (if I wanted to) choose "1" to "10" seconds, or even "fit audio," but for some reason the software is not allowing me to choose "manual." Any hints?
The manual option is available only if you don't have a sound track in your slideshow. If you have a sound track, remove it and the manual option will not be greyed out anymore.
Similar Messages
-
Preview on [device name] option not available
Preview on [device name] option not available on Folio Overlays
In v20 its available in the Folio Builder panel (iPad only, I think). You have to plug to your Mac to the iPad with the USB cable and starting the Adobe Content Viewer app on the iPad first. Otherwise check iTunes on your Mac if your iPad is listed under "Devices".
Are you using InDesign CS5.5 or InDesign CS6?
You have to be up to date with the Overlay Creator panel to v20 as well. Check for that.
Recently I had no chance with InDesign CS5 and the v20 tools installed on a Mac with OSX 10.5.8.
Uwe -
I broke my iPhone 4s screen and display. Siri worked to make calls but now says "Siri not available, connect to the internet". How do I make Siri work again till I get my new phone?
If not connected to the Internet, either through WiFi or 3G, you can't.
-
I have the latest version of photoshop cc. Why is the focus selection option not available ?
Use CC 2014 menu Help>System Info... use its copy option and paste the info here. So we know your running CC 2014 not CC and that you have an enabled GPU....and latest device drivers.
-
Hi everyone,
I'm running UCCX 8.01 + CUCM 7.1+ Cisco 7942 just for learning purpose. After creating the Outbound Campaign and imported the Contact List the call is received by the agent (call is state is received as Offering) but after press the Accept, Reject or any othe action button is received the error:
Error Unable to communicate with Enterprise Server. outbound Option not available (attached to post).
What does this mean?
Regards
Please rate all useful posts
Favor calificar todos las respuestas útiles.
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice, CCNP Voice CertifiedAny idea?
Please rate all useful posts
Favor calificar todos las respuestas útiles.
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice, CCNP Voice Certified -
WLAN override option not available for WLC 4402 - 6.0.196.
Hi All,
Its kind of weird BUT it seems that the option for WLAN override is missing.u.
I could find it on the lower version BUT not on the 6.0.196.
Please help.
Does this mean I could only set it up via the WCS and not the WLC directly.
Thank you.
Warmest Regards,
Azzafir Ariff Patel.Hi Scott,
Thank you so much for the clarification.
Thanks again.
Quoting fella5 :
azzafir,
>
A new message was posted in the Discussion thread "WLAN override
option not available for WLC 4402 - 6.0.196.":
>
https://supportforums.cisco.com/message/3042635#3042635
>
Author : Scott Fella
Email : [email protected]
Profile : https://supportforums.cisco.com/people/fella5
>
Message: -
Option not available to add skype to go number in ...
Option not available to add skype to go number in canada.... Urgent its been 1 week
venkatesh wrote:
Option not available to add skype to go number in canada.... Urgent its been 1 week
Skype To Go numbers are available in the following countries:
Australia
Canada
Chile
Denmark
Estonia
Finland
Greece
Hungary
Ireland
Latvia
Lithuania
Luxembourg
Mexico
New Zealand
Poland
Portugal
Romania
Slovenia
Singapore
South Africa
Sweden
United Kingdom
USA
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you. -
HT204053 iCloud option not available on MacBook Air
Why is the iCloud option not available on my MacBook Air? It's not under the System Preferences in the Apple dropdown...only the MobileMe options are still there.
r_lopez wrote:
Why is the iCloud option not available on my MacBook Air? It's not under the System Preferences in the Apple dropdown...only the MobileMe options are still there.
iCloud won't appear in System Preferences in Snow Leopard. But, you can get some of the features of iCloud working with 10.6.
Mail AND iCal work just fine. See this article: http://bit.ly/LvVCR2
I use the iCal info on two of my own Macs and it works fine. The Address Book hack is a maybe. Read through the comments associated with the blog entry. Some folks have gotten the AB hack to work by locking the plist file. -
30 GIG Video iPod, Video Options not available - Please help!
Hi.
I have a 30 GIG iPod Video 5th gen, with the latest iPod updater software installer on it.
But when I look at the iPod preferences, when it's plugged in via USB, all Video options (manual vs automatic etc) are all greyed out and not available for selection.
And I can't drag any videos onto the iPod (even with the right video format!).
It's like the iPod itself doesn't recognised that it is an Video one, like it has a complex and can only deal with music and photos.
Can anyone help or offer advice?
Anyone had a similar problem?
Any help would be greatly appreciated.Thanks for your help guys.
Even with the iPod set to manual, I couldn't drag iPod format videos directly onto it.
Did a factory restart, and it has fixed the problem.
And just a note; the options in the video tab will always be greyed out, when the iPod is set to manually update songs.
cheers!
bc -
Cisco Presence Server 8.5 Application - Cisco Jabber menu option not available
Dear Support,
I am trying to configure cisco jabber with Presence Server 8.5. All the documentation indicate that jabber option in Presence must be configured in the Application -> Cisco Jabber menu, however this menu option is not available in my Presence Server. Anyone know why this is happening? I am using CUCM version 8.6.1. I installed the jabber client for windows in two Windows 7 machines and I have presence and IM funcitonalities but I can not make calls or activate other features like video, desktop sharing and so on.
Any help would be really appreciated.
Best Regards,
Roberto López.Thanks a lot for pointing me to the right direction.
Just one more question. After installing jabber for windows on a couple of laptops and signing in, the call option (right click on contact or telephone icon located right to the contact) is not available right away meaning that I have to wait a long time for it to appear or if I start a call from the "search or enter number to call" field then all call button and options are enabled. Do you have any idea why this could be happening?
Best Regards,
Roberto. -
Reposting: Ctrl+H option not available after x3650 M4 firmware update
This post was originally posted on IBM’s developerWorks public forum (https://www.ibm.com/developerworks/community/forums/html/topic?id=77777777-0000-0000-0000-0000149306...) The following is a summary of the post issue and the response.
Issue:
After a firmware upgrade (included IMM, HDD and ServerRAID) to my x3650 M5 (Windows 2008 R2 Server) system, the “Ctrl+H” option to enter the WebBIOS Configuration Utility was not available anymore for RAID reconfiguration. The system boots directly into Windows.
Response:
The “Ctrl+H” option is only available in the Legacy mode so your system must have the UEFI mode enabled. There are 2 options,
A – Use the uEFI F1 System Configuration Utility for configuring RAID
B – Enable back Legacy mode by adding "Legacy Only" at boot order on the 1st step.
Also, if you have a working Windows installation you could also install the MegaRAID Storage Manager application to manage your array controller via the OS. It is normal behavior to skip the legacy BIOS menus of adapter cards if a UEFI-aware OS is installed.
The MegaRAID Storage Management (MSM) Application v12.05.03.00 is available at,
http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5077712
You may also use the UpdateXpress Installer to perform future driver/firmware upgrades from within the OS as well (or manually download the packages from the FixCentral page for your system type).
The UpdateXpress is available at,
http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=serv-xpressHi,
You said:
"D. Lights Effect is a very good feature of 6303 and in my opinion it would be updated as another possibility to select it as Breather Light Effect such as Nokia 5800 XM, due to Silent Profile activated Handset Location assistance facility. User can find the set easily rather making a miss call to find out where the set is?"
Isn't this the same as setting "light Effects=On" in the settings? Mine "breathes" away happily after a missed call.
You said
"J. SMS alert tone selection plays the tone in Level one Sound volume though the selected level is Five bar. it should be corrected in Future update."
Where are you adjusting this? I can only adjust ringtone volume not SMS alert tones....
Cheers
------ N78 ------- -
I want to upload to my server my webpage. However the FTP option is not available. The only option is the +Mobil Me+ and I don't want to use this. I have an existing website and wanted to possibly add one of the Iweb pages to it. And also I have been hired to make a site for a lady that wrote a book. I want to start putting files then later on the webhost server.
Could some one help please.When you click on the website name in the site organizer over at the left inside iWeb you do not get a menu where you can choose MobileMe, FTP, or publish to a Folder?
-
Mac mail 5.1 "save as" option not available
Mac mail working fine until I upgraded to Lion. Now, the "save as" option is suddenly grayed out and not available. I need to be able to save drafts of emails. Others are experiencing the same issue. Please, Apple, what's up?
Mac -- When in Mail, bring down the FILE menu to PRINT. You should get this a pane that looks like this one below. Make sure you have the SCALE box set to 100%.
-
Printer options not available to networked computers
Hello. Here at the office we have a network with a mix or PCs and Macs. We have an Epson Stylus Photo 1280 printer and an Epson Stylus C63. They are connected to my iMac running Mac OS X 10.4.10 and shared with the other Macs. I can access all the printer features, including "Print Settings" where you choose the print quality and the option to print only using black ink. All the other computers can't access this Print Settings, the option is simply not available for them in the print menu. So everyone has to print in color, and they can't choose better quality printing.
I tried connecting the printer to another Mac, and the same thing happened. The computer with the printer connected directly via USB is able to choose the different print settings but the ones connected via network cannot.
Is there anything I should check in the Sharing preferences, should I reinstall drivers in the networked Macs, or do anything special?
Thank you.
HugoTo get the same settings appearing on the client Mac's that appear on the Mac sharing the printer, the same version of driver needs to be installed on all Mac's.
Usually the sharing of an Intel (Universal Binary) driver to a PPC Mac wouldn't be a problem, as the driver has been written to run on both platforms. However, I believe from information provided by Matt Broughton previously, that the Epson UB drivers only work for Intels.
I believe your comment about using Rosetta may be a workaround, but I don't know how you can force the Intel to share the driver using it. I don't think that setting the Printer Setup Utility to open using Rosetta will do it, as it is the Print Dialog Extensions (PDEs) that make the options appear, but it may be worth trying... -
Add User option not available.
Hi,
I’ve recently purchased a MacMini which uses Mac OS X Tiger.
I’m looking to add a new user but the ‘+’ button on the user information panel is not available (greyed out). The only account I have created is the one created for me during the first power on setup.
Does anyone have any ideas as to why this option is not available and how to make it available.
Thanks in advance.Most likely that you have 'locked' your account settings. Click on the locked padlock and enter your account password. Everything should work.
Maybe you are looking for
-
How to Access Maintenance View from a program
Hi Experts, I have created a maintenance view for a table. i want to insert data's into the table through the maintenance view. I don't know how to access the view, how to insert data into the Maintenance view. Please suggest me how to access the vie
-
During the installation of grid infra(cluster) for Oracle 11.2 RAC one.
Good Day All, and thanks in advance… During the installation of grid infrastructure(cluster) for Oracle 11.2 RAC One Node on AIX6.1 ( PROD) , ASM used. I am getting below errors when executing ./root.sh Upon investigation ,I managed to get note: 1068
-
During Importing Project Error in ODI 11.1.1.3
HI I am importing Projects in ODI 11.1.1.3 and i m having bellow Error. Repository ID is different. com.sunopsis.dwg.SQLWorkReposException: ORA-00001: unique constraint (DEV_ODI_REPO.AK_SNP_GRP_STATE) violated at oracle.jdbc.driver.SQLStateMappi
-
Trying to deactivate CS3 from one computer to reload on another. Keep getting error message that I'm not connected to the internet.
-
Itunes is one of the worst pieces of software I've ever used
Using the latest version of iTunes is one of the worst experiences I've ever had with Apple Love the products they make but the way the company decided to think it knows best rather than actually making a piece of software that is functional It is a