Make the switch to the new phone?

I have the old iphone and love it, but am on the fence if i should upgrade to the new one for the speed. i am curious if anyone has upgraded to the new phone and what their thoughts on their decision was.

I have NOT switched. My current iPhone is just as good and actually, IMO looks better than the new ones. Since Wi-Fi is faster than 3G and since I use Wi-Fi about 90% of the time, I just cannot justify the switch for the 10% of the time where I cannot access Wi-Fi. I also don't need GPS enough to buy a new iPhone.
Additionally, my current iPhone was warranty issued in April with a March Build Date and it is flawless, meaning it looks like it just came out of the box!
BUT, if I did not have an iPhone, I would buy the 3G, without a doubt!!!
Gunny

Similar Messages

  • I have two pnones on my account...my iPhone 4 and my wife's crappy old Samsung.  I pre-ordered an iPhone 4S and plan to give my iPhone 4 to my wife and I will use the new 4S.  How do I switch the 4 to her number once I make the switch to a new 4S?

    I have two pnones on my account...my iPhone 4 and my wife's crappy old Samsung.  I pre-ordered an iPhone 4S and plan to give my iPhone 4 to my wife and I will use the new 4S.  How do I switch the 4 to her number once I make the switch to a new 4S?

    Just call yur provider and they will set it up with you.
    This is what I do, when I get a new iphone and give mine to my wife.

  • I bought a new 5c and transferred from an old update from my iPhone 4.  The only issue I have is the name of my new phone.  How can I change it from Amyiphone4 to something else?

    I bought a new 5c and transferred from an old update from my iPhone 4.  The only issue I have is the name of my new phone.  How can I change it from Amyiphone4 to something else?

    settings - general - about - name - make the changes

  • I did a backup from my 3G and want to get the backup now on my iPhone 4, but the backup from the old 3G is not shown as an option to configurate. How do I get the information on my new phone?

    I did a backup from my 3G and want to get the backup now on my iPhone 4, but the backup from the old 3G is not shown as an option to configurate. How do I get the information on my new phone?

    First, back up your old iphone manually:
    Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your old phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
    About backups and what's saved: http://support.apple.com/kb/HT1766
    How to back up and restore: http://support.apple.com/kb/HT1414
    How to download apps for free again:http://support.apple.com/kb/HT2519
    After that, connect your new phone and let iTunes set it up. iTunes will detect the old 3G backup and ask you, if you want to use it to restore the info on your new iphone. If you agree, all settings and data will be present after the process is finished.
    This is also explained in this article: http://support.apple.com/kb/HT4137

  • How to I get my contacts from the iCloud  to my new phone

    I am having problems with my new iphone5 the lady in the shop saved all my contacts on the iCloud and said I could get them once I have started up my new phone.does anyone know how I can get my contacts from the iCloud to new iPhone. Thanks

    It depends on how she saved them on iCloud.  Check your contacts on icloud.com from your computer.  If they are there, all you need to do is go to Settings>iCloud, sign in with your iCloud ID, then turn Contacts to On. 
    If your contacts aren't on icloud.com, she may have simply backed up your phone to iCloud.  If that's the case, you would have to restore the backup to your new phone by going to Settings>General>Reset, tapping Erase All Content and Settings (which will erase the phone), then go through the setup screens on the phone and when given the option, choose Restore from iCloud backup.

  • Just got my new iPhone4, can't get the ringers to play. Yes, I've tried the switch on the side... HELP!

    Just pulled my iPhone 4 out of the box, I'm trying to set the ring tones and I can't preview them and I can't hear it when the phone rings, only vibrates.
    I've tried the switch on the side and from what I've read, there should be a little bell icon at the top; it's not there.
    I'm so frustrated with this. Can someone please help me?

    try restarting the phone and see if anything changes.
    Restart iPhone: Hold down the Sleep/Wake button and the home button together until the apple logo appears then let both buttons go and wait for the phone to restart.

  • How do i get my pictures,contacts and apps off my old phone. i ready did a storage back up on my old phone. how do i upload the stuff on my new phone even though its already setup

    how do i get my pictures,contacts and apps off my old phone. i ready did a storage back up on my old phone. how do i upload the stuff on my new phone even though its already setup

    In this case you would have to reset your new device (Settings > General > Reset > Erase All Content and Settings) in order to restore it from a backup during the device setup.

  • My screen on my iPhone 4s is gone blank and wont turn back on. Even when i reset the phone it is just blank. I know the phone is on because when i change the switch on the side it vibrates.

    my screen on my iPhone 4s is gone blank and wont turn back on. Even when i reset the phone it is just blank. I know the phone is on because when i change the switch on the side it vibrates.
    Also before this the phone wasnt picking up any signal so it worked basically as an ipod.
    How much would it cost to repair this problem?

    Hello ozzy9294,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Display has no backlight or dark screen
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    Best of luck,
    Mario

  • Recently recieved a second hand Iphone 4. I was testing the Camera, the rear one worked perfectly fine, however when i pressed the switch button the front facing camera shutter freezed and started flickering. In order to get it back to the rear camera I

    recently recieved a second hand Iphone 4. I was testing the Camera, the rear one worked perfectly fine, however when i pressed the switch button the front facing camera shutter freezed and started flickering. In order to get it back to the rear camera I have to reset my settings. Does anyone know why the front facing camera is doing this and how i can fix it.
    iPhone 4, iOS 5.1.1

    I would ask the person you received it from if they've had this issue.
    You can completely close out of the camera, then do a reset, hold down the home/power button together until yo usee the apple logo and then release, then wait for you phone to boot back up.

  • ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (ex., 5 min) using the SLA?

    I have ASA 5505 8.4.  How to configure the switch to the backup channel to the primary with a delay (for example 5 min.) using the SLA monitor?
    Or as something else to implement it?
    My configuration for SLA monitor:
    sla monitor 123
     type echo protocol ipIcmpEcho IP_GATEWAY_MAIN interface outside_cifra
     num-packets 3
     timeout 3000
     frequency 10
    sla monitor schedule 123 life forever start-time now
    track 1 rtr 123 reachability

    Hey cadet alain,
    thank you for your answer :-)
    I have deleted all such attempts not working, so a packet-trace will be not very useful conent...
    Here is the LogLine when i try to browse port 80 from outside (80.xxx.xxx.180:80) without VPN connection:
    3
    Nov 21 2011
    18:29:56
    77.xxx.xxx.99
    59068
    80.xxx.xxx.180
    80
    TCP access denied by ACL from 77.xxx.xxx.99/59068 to outside:80.xxx.xxx.180/80
    The attached file is only the show running-config
    Now i can with my AnyConnect Clients, too, but after connection is up, my vpnclients can't surf the web any longer because anyconnect serves as default route on 0.0.0.0 ... that's bad, too
    Actually the AnyConnect and Nat/ACL Problem are my last two open Problems until i setup the second ASA on the right ;-)
    Regards.
    Chris

  • I can not access the switch through the console (solved)

    Hello,
    I'm having a problem.
    I can not access the switch through the console. The web interface is working properly.
    Model: SRW224g4
    Below some pictures.
    The HyperTerminal settings
    error:
    If anyone can help me?
    Thank you and excuse the bad English.

    Hello Rumenigue,
    It looks to me like you are using a console cable.  The reason you usually see them the other way around is because with a console cable the RJ-45 end goes into the device (an ethernet jack labeled console) whereas on this switch the console port is serial itself. 
    Usually the serial end of the cable you have plugs into a USB to serial adapter (because most computers today don't have serial ports anymore) and that USB connection goes into your PC, creating the virtual COM port you need in HyperTerminal.
    So if you get a USB to Serial adapter you could plug that from USB to the console port, or if you computer has a serial port of its own just connect a serial cable directly from the PC to the switch, then use HyperTerminal with the settings recommended above by Tom.
    Hope I have helped,
    Christopher Ebert
    Network Support Engineer - Cisco Small Business Support Center

  • Can I assign the switch on the side of my ipad to turn on and off wifi?

    Can I assign the switch on the side of my Ipad to turn on and off wifi?

    No. The only choices are audio mute or orientation lock.

  • I am trying to sync my itunes from the cloud onto a new phone but my boyfriend and I share a computer and it keeps coming up with his information to transfer. How do i change it to my information?

    Hi,
    I am trying to upgrade to a new phone and when I plug it in the computer it thinks I am my boyfriends itune even though I signed in as myself. How do I make the computer think that it is my cloud itune information that I want to restore onto this phone?  I have already authorized this computer.

    april1963 wrote:
    Hi,
    I am trying to upgrade to a new phone and when I plug it in the computer it thinks I am my boyfriends itune even though I signed in as myself. How do I make the computer think that it is my cloud itune information that I want to restore onto this phone?
    To use iTunes, you need to first backup your old iPhone to this computer, then you can restore your new iPhone from this backup on this computer.
    How do I make the computer think that it is my cloud itune information
    You don't.

  • HT4528 how do i get stuff from my icloud after i left the store with my new phone and left yhe old one there

    how do i get my stuff from icoud to my new 5c after i left the store and gave them my old phone

    If you deleted everything from your old phone & logged out of iCloud all you need to do is Activate your new phone & Log In to iCloud..

  • My photos are not transferring from the cloud to my new phone

    I bought a iPhone 5s when transferring my old photos from the cloud. Only 16 of the photos transferred to the new phone, the rest of them just say downloading. How do I get the rest of my photos? 

    If it appears to not be making any progress even though you have a strong wifi signal, sometimes turning the phone off, then back on will get things going again.  Otherwise about all you can do is try restoring the backup again.  If you still have the old phone, you could also try creating an iTunes backup, then restoring that backup to your new phone.

Maybe you are looking for

  • How to migrate vShield to another vCenter?

    I have a vCenter 5.1 infrastructure with 2 ESXi 5.1 hosts and vShield implemented with 2 Edges. I need to migrate this 2 ESXi hosts to a new vCenter 5.5. Migrate the hosts is not the problem, my question is: how I migrate vShield Manager, Edge, etc t

  • After a person submits a form can they receive a PDF copy of the form

    Is there anyway of having the completed form automatically return to the the person who submitted it, rather than just the replies they sent, or can it automatically generate the responses into a PDF so that they can be returned to the person for int

  • JMS Queue to accept byte messages

    Hi Gurus, I am using the SOA verion 10.1.3.4 for Siebel to EBS integration. In fusion middleware BPEL I am getting error that ProcessSaleOrder is requiring an XML input. As Transports handle all data as binary data (bytes) so I need to define the que

  • How can i validate wild characters.

    Hi i am having peculiar problem . in my report  i have a parameter where user is asked to enter postal code. to validate that field i need to see that he is not entering any wild character(*,!.@.#,$....) like that. how can i do that help me out. Than

  • Can you change the photoshop menu color (light gray) to match the default Premiere Pro menu color?

    I'm a new Adobe user, and maybe it's my OCD-edness coming out, but I can't stand how Photoshop's menu doesn't match the menu of most of the other apps in the Adobe production suite.  Encore, After Effects, Premiere Pro all have a dark gray menu by de