Make to order - Costing

Dear Experts,
I am working on Make to Order Scenario..........I have execute CK40N for the finished product and standerd cost estimate of finished product is coming Rs.322000 for a unit.
Again when i m running Inquiry costing (VA11) ->Extras-> Costing for the same product for a unit, i am getting total cost of Rs.313000, which is less than cost arrived at CK40N. I checked costing sheet also but not able to resolve the problem.............that why it is coming less.
<b>Note</b>: We r not using any sale order specific BOM or Routing.
kindly guide me to solve the issue.
Thanks,
Bijay

Hi,
The settings for costing variant for a production order are maintained in t.code opl8. choose your order type &  in the controlling tab check if costing variant for planned & actual cost is ppp1 & ppp2 respectively.
Regards,
SDS

Similar Messages

  • Make to Order cost collector

    Hello PP Experts
    please provide information regarding setting for cost collector against make to order case
    I have created one order type for cost collector that is working fine for descrete manufacturing  when i create production order through CO01
    but when i create order through CO08 then one massage pop up that is no any cost collector found
    why cost collector not active in CO08
    how can i configure cost collector for sales order based production order (make to order) by Co08
    Please Help me in this issue
    Prashant

    HI Venkat,
    Product cost collectors cannot be used for the following objects and production environments:
    -Manufacturing orders that settle to a sales order item if you are using a nonvaluated sales order stock in sales-order-related    production
    -Sales-order-related production with a valuated sales order stock, except in repetitive manufacturing environments
    -Engineer-to-order environments
    -Manufacturing orders that are part of a collective order
    -Joint production
    Regards,
    Declan

  • In make to order cycle semifinished costs are not appearing in itemisation

    Hi
    We are facing a problem in Make to order. When a production order is created with respect to a sales order, semifinished costs are not appearing in Itemisation or cost component structure of Production order.
    In other cases like make to stock and planning with final assembly costs are appearing. we are checking costs at CO02 - goto menu- costs - itemization.
    Please provide us solution for this problem.
    Thanks and regards,
    Deepa

    Hi
    Please check 'Cost component Structure' Attribute details data for the semifinished component.
    In that chek for 'Rollup cost' and also check for 'Filter Criteria for cost component views on Itemization' properly.
    Regards
    Laxmiprasad
    Apart from above pls check for semifinished product in material master in costing1 view for material origin check box, check it if not selected.
    Regards
    Laxmiprasad
    Edited by: Laxmiprasad Pagidala on Jan 22, 2008 2:03 PM

  • Belated costs during a make-to-order/sales order controlling process

    Hello Experts,
    We implemented a make-to-order process where we collect actual costs of a repackaging process. The cost object of that process order is the sales order item (VBP, Vertriebsbelegposition). So far that cost collection works absolutely fine and the actual costs are collected in the conditions of the sales order item.
    Unfortunately it can be the case that after billing the sales order item, operations debits the process order with an activity (e.g. quality analysis). After using transaction KO88 the balance of the process order is posted to the sales order item even if it has been already billed. But when I open the sales order with TA VA02 the conditions of these sales order item are already grey and not editable anymore. And therefore it is not possible to actualize the price and the extra costs of the belated positing of operations.
    Do you know any possibilty to creat a second bill of the same sales order item to collect the additional costs?
    BR
    Mike

    Hi,
    Finance person would need to create a JV to knock off those costs. The same wont be possible through SD route again.
    Regards,
    Amit

  • Make to order and make to stock scenarios in prodcut costing

    Dear Co Experts,
    I am new to product costing, in product costing there are two way to estimate the cost of the product by using make to stock and make to order.
    Kindly tell me the scenario of make to order and make to stock
    In make to order scenario what are the minimum configuration steps are required in controlling, PP, MM, and SD.
    In make to stock scenario what are the minimum configuration steps are required in controlling, PP, MM, and SD.
    How we will defend the costing variant in make to order scenario
    I really appreciate for your early response
    pls tell me end to end cycle for both the scenarios
    Warm Regards
    Venkataswamy

    Hi
    In Cost Planning in Product Costing,We configure Cost variant
    Costing variant is a A tool that contains all control parameters for costing, including
    parameters that control how cost estimates are executed and the material
    prices or activity prices that are used to valuate the costing items.
    In Cost Object Controlling  category a)by order b)by period c) sale order
    a) BY Order,We create Co Production Order which will be used in Make To Order Production.
    b) By Period,We create Product Cost Collector which will be used in Make To Stock or Repetitive Manufacturing
    c) By Sale Order,We create sale order with linked to Co production order,We can use Make To Order Scenario.
    Re: Repitative manufacturing
    www.sap-topjobs.com/SpecialPP/samplepc.doc -
    Regards
    Edited by: Dublin on Oct 19, 2009 10:02 AM

  • HALB costs are not shown in Itemisation for Make to order

    Hi
    We are facing a problem in Make to order. When a production order is created with respect a sales order, semifinished costs are not appearing in Itemisation or cost component structure of Production order.
    In other cases like make to stock and planning with final assemble costs are appearing.
    Please provide us solution for this problem.
    Thanks and regards,
    Deepa

    Hi,
    Please check with Costing relevancy ind for Semei material at "General data Tab" in component over view of Production order (co02)
    Do u mean to say for same sale order material Number ,  semi material cost will not be added  forPG20 and is added for PG 10 at Prod order.Please confirm
    Regads
    Pradeep

  • Cost Report For Make-To-Order

    Dear Sir,
    We manufacture Machinery and it is Make-To-Order scenario .  Pl guide us about the Tcode available to see the complete cost details (Material / Labour etc) incurred during the manufacturing of a Product (Product referring to a Sale Order Line Item against which Production has been done) .
    Incase Std Tcode is not available , kindly guide us about the Tables which need to be refered to make a Z Report .
    Pl help us .
    Rgds
    Sonia

    Hi,
    There is one standard report with transaction code KKBC_KUN is available to look into the Standard cost and Target cost and variances. This will meet your requirement.
    Cheers!
    Trust this answers to your query!

  • WE  ARE  FOLLOWING  MAKE TO ORDER  IS IT  ESSENTIAL  THAT  WE  DO  COSTING

    Dear  All,
    we  are  doing   make  to  order scenario  is it  essential  that  we  do  costing  run  . for   finished  products  and  semifinished  products.
    regards
    sree

    hi,
    Yes,
    The process is triggered when an order for a configurable material is received from the customer. The customer order is recognized in the MRP run resulting in planned order for production of the material. If insufficient warehouse stock is available, purchase requisitions are created for the raw materials required.
    When the production order is created, target costs are calculated for the order lot size (preliminary costing). During the production process, costs incurred are updated on the order, which enables you to keep track of and compare target costs and actual costs at any time.
    Regards
    Ravi

  • Make to Order- Sales Order Costing

    Hello All,
    Can anybody give a brief process overview of sales order costing. I have experience with production orders and costing in general. But I get a little loopy around at what point & how the cost cost flows in sales order, do we need to do a WIP/ Variance calculation & settlement on production orders.
    and when should R.A be done on sales order.
    Thanks,
    Andy

    Hi Andy,
    Please check the following links. I hope this helps you
    [http://help.sap.com/saphelp_di471/helpdata/en/90/ba6da4446711d189420000e829fbbd/content.htm]
    [http://esoadocu.sap.com/socoview(bD1lbiZjPTgwMCZkPW1pbg==)/render.asp?packageid=DBBB6D8AA3B382F191E0000F20F64781&id=1DE2DE70DF2D11D912D100306E055DA7]
    B/R
    Sameer

  • Error Message V1810 - Make to Order No Change delivery plant in Sales Order

    Hello, for a client where I'm setting the flow intercompany , but i have  an error on the Sales Order when I must be change delivery plant.
    Scenario: Make to Order, Product configuration, Sales Order BOM created by  CS60
    Step:
    1 - I create sales order fo company X delivery plant 1000
    2 - Creates Order BOM on plant 2000 Company Y
    3 - creates MRP Planned Order
    4 - Convert Planned Order to Production Order
    For different issues can happen that you decide to ship the goods to a different plant than the X. Production Plant remains 2000.
    If I try to change the plant on the Order system stops me with the following error:
    Message V1810 - Plant can no longer be changed
    Diagnosis
    The plant can no longer be changed in the Following situations:
    The item has been assigned to a project.
    There is a production order for the order item but it is not a staticassembly order.
    Already have accrued costs.
    For the very complex structure of the product I can not delete the production order and sales order BOM.
    How do I handle these cases?
    Can anyone help me?
    Best regards
    Giuseppe

    Hi Guiseppe,
    can you please answer some questionsa to understand your requirement.
    if you want to transfer the goods from plant to plant you can do it through Stcok transfer MB1B t code.
    1.then why you want to change the plant? in which element you are trying to do in sales order or production order?
    2.you mention it as intercompany and MTO can you be clear for whoom you got the sales order(internal or External Customer?

  • Accounting Entry getting passed in case of Make to Order Scenario

    Hi Experts,
    In Make to Order scenario, as per my knowledge, when the goods is recieved from Production Order the Accounting entry gets passed is Inventory A/c Debit and Cost of Goods Produced Credit.
    But how is Cost of Goods Produced, which is  an expense, gets crebited? I am confused, because the above entry will create a credit balance to an expense account. Can anybody clarify this please?
    Thanks and Regards,
    Sameer Joshi

    Thanks for the reply.
    Do you mean that at the time of PGI, when the entry is posted to COGS, the amount of COP will also get transferred to COGS and then the whole amount will be posted at PGI?
    Thanks and Regards,
    Sameer

  • Sales order cost objective vs OKB9  Internal order cost object.

    Hi All,
    we facing an  issue with sales order cost objective vs OKB9 cost object.
    For IC PO service material, we assigned account assignment category 4.Reasonis Service material was not showing on G\R account.
    The G\L account 7898788, we assigned to Service Item (material type DIEN)  , for G\Cost 7898788 cost element is assigned in OKB9. Combination business + order 3478787.
    Now conflict with sales order cost objective vs OKB9  internal order cost object.
    While posting intercompany IR posting system thronging below error messageu2026
    Enter only one true account assignment
    Message no. KI249
    Diagnosis
    You made assignments to several objects in CO (cost center, order, project etc.). 2 of these have been created as true objects.
    System Response
    You are allowed only one account assignment for each cost-relevant account
    How to resolve this issue.. Do I make any config changes in the system to overcome this issue?
    Or any sub account to assin in VKOA config for internal orderu2026
    Regards,
    Adi

    Hi Waman,
    Thanks for your inputs.
    Issue :  IR failed to post for wax  Sales Order -> ICPO  - Error:  Enter only one true account assignmentu2019.
    Background:
    Original setup  in  Test system   & Productionu2013 account determination for servive (DIEN) account assignment category u20184u2019 was linked to G/L Account  34444444, As part of project orange u2019, account determination was linked to account u201889710100u2019.
    Account u20188970100u2019   34444444 was replaced with 8970100 ,is not linked to any cost center & always post with reference to IC Sales Order as per config in OKB9 based on company code (US99) + cost element (89701100) + business area (9yyy). This caused a conflict while posting IR, system could not determine exact order for posting financial value.
    Conflict:  Actual Sales Order 34789343 is  linked to PO via account assignment category & IC dummy sales order (8014331) is determine via config setting. Two cost objects cannot be linked to one IR G/L account booking.
    Regards,
    Adi

  • Sale order costing process : Help required

    Hello All,
    Belatted Happy New Year 2011 to all.
    I have a question related to Sale Order Costing. It goes like this,
    My client is into Pipe coating business who receives the pipe from the customers, coats it as per there requirements and despatches it thereon. There is no concept of FG here as its only the service he is doing on it and also when he receives the pipe there is no raw material cost on it. Raw materials for him would be chemicals etc which he uses to coat the pipe.
    And also this demands variant configuration from SD and PP angel.
    As this scenario is customer specific, it demands Sale Order based costing(Sale order cost estimate).
    My doubt is, how the sale order costing process goes with.
    In general scenarios, Make to stock, we use production order based costing where standard cost estimate is calculated for planned cost and actuals are incurred on PO settling the variance to COPA
    Similarly how the costing goes with if Sale order cost estimate is used. What i think is, here instead of Standard cost estimate for plan, we will go with Sale order cost estimate at sale order level, and incur actual cost at production order and settle the cost of Production order to Sale order. Correct me if i am wrong, and request you ppl there to explain me the process of costing in the scenario said above.
    apart from that, my client wants the flexibility to change the cost estimate at quotation level.
    Please suggest me with solution explaining the process of costing here.
    Thanks in advance,
    Ravi Kumar

    Hi Ravi
    Your understanding of the scenario is very much right...
    In your case, you need to have sales order as cost object...
    Process
    Your stock would be non valuated stock, because the FG is not your stock.. You are just doing a service
    Based on the characteristics chosen in the Sales orders, system would determine the Sales order BOM
    Based on sales order BOM, Sales order cost estimate would be calculated....
    You would receive the Customer pipe in your stock against the sales order... It would be a non valuated GR... You can track the Qty only
    Sales order would trigger a production order... The prod order can have its planned cost, which is only for information sake
    The Customer Pipe, Chemicals would be issued to prod order to coat the pipe... And also Labor/machine hrs may be confirmed
    There after your production order would be settled on Sales order
    Then you would do PGI (Post Goods Isue).. This will not trigger any accounting doc
    Then you do billing... The sales revenue would be posted on the sales order
    Then you settle the sales order to COPA.. This will close the cycle
    Configuration
    The IMG Settings required would be as below
    1. You would use account assignment category (AAC) E
    2. Create a Requirement class with
    a. AAC = E.... (Means sales order is CO Object)
    b. Valuation Indicator = BLANK (Means Non Valuated Stock)
    c. Costing ID/Costing Method = As per your choice to calculate the Sales order cost estimate
    3. Assign this req class to Requirement Type
    4. Give this req type to your PP/SD team.. They would assign it to Strategy group / Item Category to determine it in the sales order
    Regards
    Ajay M

  • Sale order costing in Retail Business

    Dear Experts,
    We are supporting Retaill based clinet and also that same client using IS RETAIL ECC6.0. Now client is doing retail business as well as S&D also. Business needs that they want to see sale order costing for every trading goods ,which same sold to external customers through S&D customers.
    1. Is it possible to get sale order wise costing for retail trading article (HAWA) type.
    2.How can i make cost sheet for trading goods
    3.How can i share or apportion palnned cost to sale order
    Please support this appreciate and pls.forward user docs and customization settings for sale order costing.
    Best Rgds
    Suma

    I think you put this in the wrong forum

  • HP 15-d030nr: What Upgrades Do I Need To Make In Order To Be Able To Use Adobe After Effects CS6?

    HP 15-d030nr, what upgrades do I need to make in order to be able to use adobe after effects cs6?
    I installed Adobe After Effectss CS6 because I was told by HP Support that it would still work; it doesnt.  It is very slow, and locks up bad.  What upgrades do I need to do, or am I looking at having to go buy another labtop?  Also, can I do these upgrades myself - at what cost?
    **HP 15-d030nr**
    Hardware
    Product Name 15-d030nr
    Product Number F5X99UA
    Microprocessor 2.0GHz Intel Pentium N3510 Processor
    Microprocessor Cache 2MB L2 Cache
    Memory 4GB DDR3L SDRAM (1 DIMM)
    Memory Slots 2 user accessible
    Video Graphics Intel HD graphics
    Display 15.6-inch diagonal HD BrightView LED-backlit touchscreen display (1366x768)
    Hard Drive 500GB 5400RPM hard drive
    Multimedia Drive SuperMulti DVD burner
    Network Card 10/100BASE-T Ethernet LAN (RJ-45 connector)
    Wireless Connectivity 1x1 802.11b/g/n WLAN
    Sound HD Audio with stereo speakers
    Keyboard Full-size island-style keyboard with numeric keypad
    Pointing Device Touchpad supporting multi-touch gestures without on/off button
    External Ports Multi-format digital media card reader for Secure Digital cards 1
    SuperSpeed USB 3.0
    2 Universal Serial Bus (USB) 2.0
    1 HDMI
    1 VGA (15-pin)
    1 RJ-45 (LAN)
    1 Headphone-out/microphone-in combo jack Dimensions 1.11 in (H) x 14.88 in (W) x 10.20 in (D) Weight 4.96 lb Power 45W AC adapter
    3-cell 31WHr 2.8Ah lithium-ion polymer battery ID Mech Description Front facing HP TrueVision HD Webcam with integrated digital microphone
    **After Effects CC (2014) system requirements and language versions Windows**
    Intel Core2 Duo or AMD Phenom II processor with 64-bit support
    Microsoft Windows 7 with Service Pack 1, Windows 8, or Windows 8.1
    4 GB of RAM (8 GB recommended)
    5 GB of available hard-disk space; additional free space required during installation (cannot install on removable flash storage devices)
    Additional disk space for disk cache (10 GB recommended)
    1280 x 1080 display
    OpenGL 2.0–capable system
    QuickTime 7.6.6 software required for QuickTime features
    Optional: Adobe-certifi ed GPU card for GPU-accelerated ray-traced 3D renderer
    Internet connection and registration are necessary for required software activation, validation of subscriptions, and access to online services.*
    *I also have a 1TB external hardrive*
    This question was solved.
    View Solution.

    Your problem is that the program wants a good video card and a fast hard drive and lots of memory and you have none of the above. If you upgraded the RAM to 8 gigs and installed a solid state hard drive you might make the program useable but the real bottleneck  is going to be the Intel HD graphics, which cannot be upgraded. 
    You do have an open slot to add one 4 gig memory module. This is an easy relatively inexpensive upgrade. See here:
    https://www.youtube.com/watch?v=L7FvZ-JduRM
    http://www.crucial.com/usa/en/ct51264bf160b
    I would try this a step at a time. Next would be the solid state drive. That would cost maybe $150. Post back if you need more help. 
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

Maybe you are looking for