Make to Oreder

Hi Experts,
I am working on purely MTO senario with following settings:
FERT Strategy:20,Ind/Coll Ind;blank
ROH strategy;blank,Ind/Coll:Blank
Against the sales order I am running the MRP through MD02,getting purchase req for ROH with sales order stock and planned order for FERT with sales order stock.All the subsequent process were done.I am not getting any financial document,neither at Pur Ord level not at the production order as well as for the PGI of Sales order.Will anybody pl explain me if it is normal...if so why?
Regards
Reshmi

Dear,
Production order settlement in case of sales order is derived based on the sales order account assignment defination, In this case it appears they have gone for Non-Valuated Sales order stock. Are you using the Make to Order production with Strategy 20 or 25 then it comes under the non-valuated customer order stock.
Please refer this link,
GR done as Non Valuated Goods Receipt
Regards,
R.Brahmankar

Similar Messages

HT5312 i want order to make rescue eamil address for my apple id

i want oreder to make rescue email address for my apple id

I'm trying to do the same but this doesn't seem to work. For some reason the email address I want to use as my primary is still associated to the account, although it is not listed as either the primary or an alternate address (it was until just now my rescue email address).
Any ideas how to change a primary email address - e.g similar to most other applications along the lines of a button/link next to said email address that says "make primary" (seriously it can't be that hard!)

How do I use Edge Animate to make a clickable image which can be used in Author, and which will redirect you to a different page in your ebook?

If anyone has experience with Edge Animate, I know that I can make an image clickable, and I can insert a url to define where it will go once clicked. But I want to make a widget to use in iBooks Author, that can take the reader to a certain page of the book. Is this possible?
It all seems very complicated. Make one thing in Edge Animate, then somehow have that reference something in Author, which will finally work in an ebook. I have no clue where to begin.

Sort of. I'm using this code inside an action for a button symbol. But it doesn't work perfectly. Trying to debug it.
Let me know if you have any luck.
//Check to see if pageCounter already exists
if (typeof EC.pageCounter === 'undefined') {
// it doesn't exist so initialize it to first page
EC.pageCounter = 2;
//check if the page is only 1 digit -- patch for single digit
if (EC.pageCounter < 9) {
// it is, so we need to pad a 0 on the front.
EC.pageCounterString = "0" + EC.pageCounter;
//e.g. 01 ...09,11,12,13....115,222352,,....
else {
EC.pageCounterString = EC.pageCounter;
EC.loadComposition(EC.pageCounterString + "/publish/web/" + EC.pageCounterString + ".html", sym.$("container"));
EC.pageCounter = EC.pageCounter + 1;
//TODO for back -1

My iPad wont let me download apps bc security questions, but when I try to make them it freezes

Every time I try to download an app it tells me I need to update my security questions, but once I click to make the questions the box goes white. So I'm not sure how to fix it

The new questions show on your account on http://appleid.apple.com ? If they do then try logging out and back into your account on your phone (assuming that is where you are trying to purchase from) and see if the new questions then show on it.

Does anyone other than Apple make a Mini-DVI to VGA adapter?

I didn't know what other forum to post this in, but it's a proven fact that if anyone else made them, it would be half the price and twice the quality.
Does anyone else make them?

DJT Circuit wrote:
Proprietary hardware is never a good thing.
To a point you are correct. The problem is when some things get released two bit companies jump in and build stuff that isn't up to par. Then there are very reliable companies that do make products better than OEM equipment
I would like to see someone make a cable instead of the adapter. It would be very nice to have a 6 foot Mini DVI to DVI cable instead of the adapter and a cable plugged into that.

How can I make sure my history doesn't expire and that I can transfer over places.sqlite?

There's probably alot of questions on this subject asked already but I've gone over just about all of the possibly relevant ones that've been already asked and I still can't figure out what to do. I'm trying to move my complete history from an XP Firefox profile over to a Windows 7 profile on another computer. Do I just do it by copying the places.sqlite file within that XP profile over into my USB flash drive, then replacing the places.sqlite in the Winodws 7 profile with the one from the other one? And after the file's in the right profile will I be able to just view all the sites I viewed on the old computer on the new one's history dialog box? I only am transferring my XP history to my Windows 7 because I want to look at stuff several months back and it keeps expiring on me, even to the point of getting rid of a month of history a week or so ago. This brings me to my other point, I keep up fairly well with updating both of my Firefoxes but recently (and I think this was way, way after they updated the browser so the history isn't set to expire by days anymore) the history just isn't reliable anymore. My XP will not only expire older months of history faster and faster it seems, but individual websites at the end of each month will actually disappear as I view new ones, instead of it all staying in there and just expiring each old month as a whole. Also, random sites in every month scattered all over the list of URLs will just disappear, and random sites that I've only visited in the past couple days will insert themselves randomly into much older months of history, which makes it hard to figure out the URLs I've seen, this last one seems like a common problem from what I've read, and all of these problems seem to be slowly creeping into my Windows 7 as well when they were originally on only my XP. The thing is for a very long time my Windows 7 would keep every ounce of my history that I kept on it, unless of course I went through the Clear History process myself. Now it seems to be slowly deleting it and having all the other problems that I mentioned earlier. I've got 592 GB out of 931 GB that's free space on my Windows 7 that I want to transfer my XP history into, and my Control Panel System panel says I've got 8 gbs of RAM in total. If I need to get some other information on RAM mention how to do that if you could. So in total, how can I transfer my XP history over into my Windows 7 so I can view all the sites I viewed on my XP in my Windows 7 history panel, as well as view all the old expired and/or manually deleted history on my Windows 7, without worrying about whether it will expire itself while I'm viewing it and writing down the relevant URLs that I need to know about. If I can only keep all my history through installing an add-on, a link to a relevant legal add-on that'll work well on both operating systems would be appreciated. Thanks to all here. (:

Hello Saethwyr99,
''Do I just do it by copying the places.sqlite file within that XP profile over into my USB flash drive, then replacing the places.sqlite in the Winodws 7 profile with the one from the other one?''
you are correct : [https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile#w_your-important-data-and-their-files Your important data and their files]
''Also, random sites in every month scattered all over the list of URLs will just disappear, and random sites that I've only visited in the past couple days will insert themselves randomly into much older months of history, which makes it hard to figure out the URLs I've seen, this last one seems like a common problem from what I've read, and all of these problems seem to be slowly creeping into my Windows 7 as well when they were originally on only my XP.''
from Firefox 4 and above versions there is not a time limit for the history.
Firefox determines automatically how many pages can be kept '''without affecting the performance.'''
''as well as view all the old expired and/or manually deleted history on my Windows 7''
i think this in not possible
''If I can only keep all my history through installing an add-on, a link to a relevant legal add-on that'll work well on both operating systems would be appreciated.''
check the next add-on : [https://addons.mozilla.org/en-us/firefox/addon/expire-history-by-days/ Expire history by days]
thank you

I was able copy the hardrive of my old macbook from "My Passport" onto the desktop on an older iMac. but i dont know how to make my hardrive and user name be the main one since someone had used it in the past and had their info on the comp. please help!

I recently broke my 2008 macbook. i was able to use an external hardrive to back up my data onto My Passport. I was going to buy a new computer but a friend told me sher had an older version of the iMac. (not sure how old but it doesnt have a camera if that helps) i was able to hook it up and turn it on but i ran into a few problems. 1) the "authentic" user or whatever it says is someone who previously used the computer. i added me as a user but im not sure how to make me the main user. 2) after hooking up My Passport, i was able to drag my files and copy them to the desktop.(i think i did it correctly) now, i dont know how to make my hard drive and applications and iformation the "main " info. The current apps on the iMac are super old versions of iTunes and iPhoto and such. 3) while trying to open the apps from my macbook on the iMac, it said it didnt have the right software to open these apps.
I am so computer illiterate so someone please help!!! Also, i do not have internet in my new apartment yet so if there is a way to make this happen without using the internet that would be preferred. sorry for the horrible spelling and poorly written paragraph.
THANK YOU!!

You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
You need to get a new computer or a refurbished one.

How can I make a transparent animated gif?

I'm using CS2. I have an animated gif that I want to take the black background out of so that the animated part of it is all that remains.
Here is a link to the image:
http://img.photobucket.com/albums/v97/tragicmike/random/Tesseract.gif
I basically want to remove all of the black background from the image so that the animated tesseract is all that remains. I know how to open the gif to expose the layers using ImaegeReady, then edit them in PhotoShop. But when I made the black areas of each layer transparent (by selecting the RGB channel, inverting the selection, and hitting delete), saved a copy, and tried viewing it, it seems to just display all of the transparent layers constantly instead of cycling through them.
Can someone please help me figure out how to make an animated gif with a transparent background? If I lose some of the black areas of the animated part (since they seem to get deleted when I remove all of the black background) it's no big deal. I just need to know how to do this so that it plays correctly.
Thank you!!!
Mike

>
"I have to wonder why the black background was included on every frame of the moving shape."
 
 Well, George...the only reason I can think of is because it's an animated GIF, and GIFs only support one layer.
 
 Whatever application it was created in should have been able to render it out with a transparent BG. But I suppose the creator had his/her reasons for going with the black BG.
 
 (Full disclosure: I ran across
<s>that same</s> a similar animation back in December, and the version I grabbed only had the black showing through the inside of the tesseract. I opened it in ImageReady and

added
 a black BG so the edges didn't look jaggedy.)
 
 
<a href="http://www.pixentral.com/show.php?picture=1FgHXbj4UpXYtUVrbeah7sbqQXDR40" /></a>
<img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1FgHXbj4UpXYtUVrbeah7sbqQXDR40_thumb.gif" border="0" />

How to make column headers in table in PDF report appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp

Hi my name is vishal
For past 10 days i have been breaking my head on how to make column headers in table appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp.
Given below is my code in c# on how i export datas from different tables in sql server to PDF report using iTextSharp:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Data.SqlClient;
using iTextSharp.text;
using iTextSharp.text.pdf;
using System.Diagnostics;
using System.IO;
namespace DRRS_CSharp
public partial class frmPDF : Form
public frmPDF()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(6);
table.TotalWidth =530f;
table.LockedWidth = true;
PdfPCell cell = new PdfPCell(new Phrase("Institute/Hospital:AIIMS,NEW DELHI", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK)));
cell.Colspan = 6;
cell.HorizontalAlignment = 0;
table.AddCell(cell);
Paragraph para=new Paragraph("DCS Clinical Record-Assigned Dialyzer",FontFactory.GetFont("Arial",16,iTextSharp.text.Font.BOLD,BaseColor.BLACK));
para.Alignment = Element.ALIGN_CENTER;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(105f, 105f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn = new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select d.dialyserID,r.errorCode,r.dialysis_date,pn.patient_first_name,pn.patient_last_name,d.manufacturer,d.dialyzer_size,r.start_date,r.end_date,d.packed_volume,r.bundle_vol,r.disinfectant,t.Technician_first_name,t.Technician_last_name from dialyser d,patient_name pn,reprocessor r,Techniciandetail t where pn.patient_id=d.patient_id and r.dialyzer_id=d.dialyserID and t.technician_id=r.technician_id and d.deleted_status=0 and d.closed_status=0 and pn.status=1 and r.errorCode<106 and r.reprocessor_id in (Select max(reprocessor_id) from reprocessor where dialyzer_id=d.dialyserID) order by pn.patient_first_name,pn.patient_last_name", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("Reprocessing Date");
table.AddCell("Patient Name");
table.AddCell("Dialyzer(Manufacturer,Size)");
table.AddCell("No.of Reuse");
table.AddCell("Verification");
table.AddCell("DialyzerID");
while (dr.Read())
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString() +"_"+ dr[4].ToString());
table.AddCell(dr[5].ToString() + "-" + dr[6].ToString());
table.AddCell("@count".ToString());
table.AddCell(dr[12].ToString() + "-" + dr[13].ToString());
table.AddCell(dr[0].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
System.Diagnostics.Process.Start("AssignedDialyzer.pdf");
if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.Yes)
var writer2 = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
else if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.No)
this.Close();
The above code executes well with no problem at all!
As you can see the file to which i create and save and open my pdf report is
AssignedDialyzer.pdf.
The column headers of table in pdf report from c# windows forms using iTextSharp are
"Reprocessing Date","Patient Name","Dialyzer(Manufacturer,Size)","No.of Reuse","Verification" and
"DialyzerID".
However the problem i am facing is after execution and opening of document is my
column headers in table in pdf report from
c# and datas in it all appear in bold.
I have browsed through net regarding to solve this problem but with no success.
What i want is my pdf report from c# should be similar to following format which i was able to accomplish in vb6,adodb with MS access using iTextSharp.:
Given below is report which i have achieved from vb6,adodb with MS access using iTextSharp
I know that there has to be another way to solve my problem.I have browsed many articles in net regarding exporting sql datas to above format but with no success!
Is there is any another way to solve to my problem on exporting sql datas from c# windows forms using iTextSharp to above format given in the picture/image above?!
If so Then Can anyone tell me what modifications must i do in my c# code given above so that my pdf report from c# windows forms using iTextSharp will look similar to image/picture(pdf report) which i was able to accomplish from
vb6,adodb with ms access using iTextSharp?
I have approached Sound Forge.Net for help but with no success.
I hope anyone/someone truly understands what i am trying to ask!
I know i have to do lot of modifications in my c# code to achieve this level of perfection but i dont know how to do it.
Can anyone help me please! Any help/guidance in solving this problem would be greatly appreciated.
I hope i get a reply in terms of solving this problem.
vishal

Hi,
About iTextSharp component issue , I think this case is off-topic in here.
I suggest you consulting to compenent provider.
http://sourceforge.net/projects/itextsharp/
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do I stop iWeb outputting multiple image files? It makes my site slow!

I'm a professional web designer (but don't let that put you off) who uses Dreamweaver and also handcodes HTML & CSS websites at work on a PC, but having got a new Mac for home use I thought I'd give iWeb a go for a personal site hosted on .Mac, showcasing my music and film efforts, that I didn't want to have to think about coding.
I've built a short little site using the attractive 'Travel' theme, just 5 or 6 pages so far, and have not yet added any multimedia content. However, it seemed to take ages to upload it when I published it to .Mac. So then I went to view it, and it was soooo sloooow to download each page, even on my 4mb cable connection. I know it's a fairly graphically-rich theme, but still!
I noticed that it was redrawing the navigation menu each time... and upon close inspection of the HTML code using Safari's 'View Source' to my horror I found out that that each page has a seperate '_files' folder that contains multiple versions of files that are also used in other pages - including navigation buttons and background images. I also saw that every element has styling applied to it 'inline' in the code, rather than in a single seperate style-sheet.
To confirm this I published it to a folder on my hard drive and checked it all out. What a mess!
As a WYSIWYG web page editor iWeb is great but it's an undisputable fact that the HTML markup and CSS code it produces is absolutely appaling. What's worse though is that it also renders whole swaithes of text as images and that it does create seperate folders for each pages content including images, CSS code and navigation buttons - so even though the same images and code are used throughout the site for the background and buttons and layout, they are written out as seperate files and have to be reloaded with every page!!!
This means that the .Mac server must be getting hammered and webpages are very slow to download and slow to render in Safari - it's almost like dialup when I'm viewing my iWebsite, and like I said, I've got a 4mb cable connection!
Looking at the code iWeb produces, it is good to see that tables are not used for layout, and that's one thing in its favour. But surely the whole point of providing 'themed' templates for users is that the same content is used across the site and therefore doesn't need to be created multiple times - one of the benefits of using CSS stylesheets. Why doesn't iWeb create a single stylesheet and make efficient use of repeated images instead of creating multiple instances of the same file for each page?
Perhaps there is a setting somewhere I've missed. If so, let me know someone!
It is a great WYSIWYG editor, but behind the scenes it's not efficient, it's not clean and simple and it's certainly not attractive - and I'm surprised at that coming from Apple! I know iWeb is a great tool for beginners and I'm a picky professional, but if I was Joe Public First Time Web Designer I'd be very annoyed by this.
Clean it up and sort it out Mr Jobs!
PS: Also, where does iWeb store the website whilst it's in production? I can't find it anywhere?

Your iWeb Site is stored not on your iDisk, but on a file named Domain.sites in your ~/Home/Library/Application Support/iWeb/ Folder.
If , for whatever reason, you wipe your HD and/or lose this file (Get a new computer, Re-Install your OS, Stolen Laptop, Crashed HD, Etc.) without backing-up your Domain.sites file then you will have to re-build your iWeb sites from scratch again.
Of course you can edit your Published HTML files in a different program such as Dreamweaver or even Text Edit. You just can't edit Published HTML files in iWeb. Not at this time at least.
Use iWebBackup to backup your Domain file to a Blank CD or DVD. Backing up your Domain file to another folder on your computer is not fully backing it up. If your computer gets stolen you still lost the file but if you have your Domain file burned onto a CD you have a backup!
Download iWebBackup Here
You can use iWebExtender to automatically consolidate your files into one folder and delete multiple images.
http://iWebFAQ.com

ICloud is putting my mom's contacts on my phone since we have the same apple id. Should I make a new apple id just for Icloud?

I want to be able to update all my stuff to icloud, but I don't want my mom's stuff constantly syncing with my phone too. If i make a new account, will that change what account i use in itunes and the apple store?? would I be able to have two accounts? or can you have two different users per icloud?
because what are they supposed to do if a family shares an apple id?

We upgraded my Mom's iPhone 3Gs (New Bootroom) to iOS 5 and connected My dad's Apple iD to my Mom's iPhone. My Mom and Dad's contact lists merged. Then today, when my mom was at work. She started deleting my Dad's business contacts from her phone, thinking that it would just be deleted off her phone. But, they were deleted off of my Mom's iPhone 3gs. My dad's iPad 2, iPhone 4, Intel iMac and his Windows Work computer. My dad is very frustrated. I am wondering if there is any way to do the stuff below, Please help we lost 100 contacts that are very important business contacts.
I am wanting to get the missing contacts back and then seperate the contacts list and then creating my mom another Apple id and add her contacts to her new apple ID and then have so my Dad's Apple iD has his iPad 2, iPhone 4, iMac and his Windows Work Computer and my mom's Apple iD have her iPhone 3Gs (New Bootroom) with both contacts lists seperated.

HT1229 I have several iPhoto libraries. How can I combine them to make one?e new library?

I have several iPhoto libraries. How can I combine them to make one?

iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ -
or the current version of Aperture can merge libaries from the current version of iPhoto
LN

I have two itunes accounts and want to make them into one account.

I have two itune accounts and would like to combined them to make one. Is this possible and if so how can I do it?

At the moment it's not possible to merge iTunes accounts.

How do I make one account's home folder visible to the other?

How do I make one account's home folder visible to the other? Also, when I begin to delete an account, it asks if I want to either delete its home folder, keep it in the users folder, or save it in a disk image. I want to be able to see it from my remaining account once I delete it, so if I leave it in the users folder, would I be able to see all the files (right now I can't

Use terminal to add ACL to the account,
at the prompt:
sudo chmod -R +a "<user> allow list,addfile,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr, writeextattr,readsecurity,file_inherit,directoryinherit" /User/<user_name> #yep, all that goes on one line!#
#Replace <user> with the user name that you want to have file/folder privileges#
#Replace <user_name> with the account you want to process#
example:
sudo chmod -R +a "sue allow list,add_file, .... deletechild,readsecurity,file_inherit,directoryinherit
/User/joe
#sue now gets full access to joe's files and folders#
to remove:
sudo chmod -R -a "sue allow list,add_file, .... deletechild,readsecurity,file_inherit,directoryinherit
/User/joe
You can add as many users as you want! Just lather, rinse repeat. That is how I share my itunes
directory with the ones I want to share it with.
That's the simplest way. ACL permissions overrule posix permissions.

How to make an account assignment for stock in transit inside obyc

hi experts,
i am sure i dont know as to what transaction type shoudl i use to allow postings to stock in transit account. please help me with step by step processes involved in it.
best regards
sayeed

It is not possible to define default Acct Assgmt cat for particular plants in STO. Instead you can make it default at client level (irrespective of doc type) for particular users.
For doing so you need to just maintain user parameter KNT with value equal to your Acct Assigmt cat. You can maintain user parameter in SU01/SU3. This means whenever this particular user run the transaction which includes act. assigmt cat will have default act assigmt cat.
Hope it might help you somewhat.
Cheers,
Parag Mahajan

Make to Oreder

Similar Messages

Maybe you are looking for