Make tracks work as chapters

Hi,
I have a number of tracks. I want each of them switch to the next one when pressing "next chapter" on the remote control.
I know I can somehow add them to a single track, but I can't figure out how...
I have looked through the manual, this information must be mentioned somewhere I didn't expect it.

Thank you, I've done it, everything works.
I have another little question.
Should I put chapter marker when the playhead is at the last frame of the previous clip or the first frame of the next one? It's not that critical during playback, I just want to be accurate.

Similar Messages

How to make track work in both left and right speaker?

i have an audio track with 2 speakers that each had a lav mic on them. one was recorded into left channel and the other the right channel. so of course when i play back each of their voices only come out of one speaker. pretty new to audition so how do i fix the track so that they each come out of both speakers? TIA

I have to say that, although not uncommon, for TV it depends quite a lot on how things are shot. In a standard interview situation where you might have a 2-shot to establish (with a definite left and right position) then a close up of the interviewee then a cutaway of the reporter and so on, panning can become very confusing and it tends to be better to just put everything in the centre.
Radio is easier because you don't have to be aware of what pictures are showing--but, even there care needs to be taken especially since, as Steve says, a lot of listening is on ear buds or headphones which accentuate any panning. Even in radio, though, choices have to be careful...for example, let's say the host starts with an interview where he's panned slightly right and the guest slightly left. So far, so good. However, then the next two stories are just studio reads...does the host stay panned slightly right for consistency or does he move to the centre possibly causing confusion?
I'm not saying never give positioning clues in a radio or TV mix, just that you always have to be aware of the bigger picture.

I have created some music tracks as aiff files which I want to load onto my iPod Shuffle 4th Generation, but it won't play them - it just bleeps at me. I have changed them to AAC which works - what settings do I need to use to make aiffs work?

I have created some music tracks as aiff files which I want to load onto my iPod Shuffle 4th Generation, but it won't play them - it just bleeps at me. I have changed them to AAC which works but would rather use aiffs. Can anyone tell me what settings do I need to use to make aiffs work? The info on the iPod says that it accepts aiff files!!

I have created some music tracks as aiff files which I want to load onto my iPod Shuffle 4th Generation, but it won't play them - it just bleeps at me. I have changed them to AAC which works but would rather use aiffs. Can anyone tell me what settings do I need to use to make aiffs work? The info on the iPod says that it accepts aiff files!!

How can I make more than 9 chapters in IDVD? None of the themes will let me..

I am making a dvd of our home movies for each year. I have divided the movies up by month and am trying to make a simple dvd using one of the themes and have one chapter for each month. For example I made an imovie of all the january videos and saved it as an mp4 file. I drag that into the dvd menu screen for the theme I picked on IDVD and name that chapter "January" Everything works great until I have the first 9 months and it won't let me drag any more movies over to make the last 3 chapters for the last 3 months. I haven't been able to find a theme even going back to the oldest ones that allows 12 chapters.. can anyone help me on this one?

I suggest you repost your question in the iDVD section.

I bougth the sf2 program change for garagaband, but what is it exactly and how do I make it work?

I couldn't find out what exactly the sf2 program change is, but it seemed nice, so I bought it, hoping that it would explain itself when installed. It hasn't. I did hope that it would give me some more midi instruments, and it seems like it should, but how to get them into garaband (10.0.2)?
This thread seems to explain it: How to do use Soundfonts (.sf2 files) in GarageBand 10?
It says I can add "audio unit plugins" to a track. Now I don't know what an audio unit plugin is, but I assume that it is a confusing word for a sound, and that it refers specifically to the sf2 sounds. I got as far as the smart control inspector but then "Click an empty part of the Audio Units area, choose Audio Units, then choose a plug-in from the submenu." What is the audion units area? I have clicked the empty part of whatever I could find here, but there is no submenu anywhere.
Is there anybody out there who could give a really basic explanation of what it is that I have purchased and how I can make it work? I would really apreciate it.
Ahston

I got a bit further. I found the submenu and I am able to load a default instrument. But I cannot change that instrument to any other.

TS3276 i have a macbook pro and need to send a password protected document to a pc based computer and it shows up at the other end as corrupted and they can't open it- any suggestions on how to make it work?

i have a macbook pro and need to send a password protected document to a pc based computer and it shows up at the other end as corrupted and they can't open it- any suggestions on how to make it work?

It was tricky sorting out the actual questions in your post. I think the other poster has one question in hand, here's the other:
Post by Turingtest2: HowTo: Grouping Tracks Into Albums - http://discussions.apple.com/message.jspa?messageID=9910895

I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

IF it is a manufacturing defect and you bought the device from Apple or an authorized Apple retailer, then take it into Apple.

Every time I update LR to a new version I seem to need a patch to make it work..... once again here I am SOS! I've just update LR to the 5.7 version and It wont let me start it: The application was unable to start correctly (0xc000007b).

Every time I update LR to a new version I seem to need a patch to make it work..... once again here I am SOS! I've just update LR to the 5.7 version and It wont let me start it: The application was unable to start correctly (0xc000007b).

Your system is missing a couple DLLs that LR needs, but the fix at Adobe is to copy them to the LR folder which gets replaced for each install, so you have to redo it after each LR install. It would be worth documenting the process and saving the DLLs so you don’t have to ask about it each time:
http://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html
You might also use the AIO210 program to add them as detailed in this YouTube video—maybe this is a more permanent fix, but since the files are from media-fire be very careful about what you do so as not to install a virus on your computer.
I’d scan the downloaded ZIP you download with whatever virus and internet security software you have and don’t be fooled by extraneous popups you might see during the download process. I was able to download the aio210.zip after authorizing one Captcha window and closed at least one bogus popup trying to get me to install other software. I also scanned the downloaded zip with two virus scanners and both said it was clean. Here is the YouTube video, where the link to the ZIP to download is in the description once you expand it:
https://www.youtube.com/watch?v=vlT0N2CX50g

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
Not necessarily. That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio. You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise.

I have a new MAC MINI and I want to install a second monitor. I have one connected to the HDMI and it works. I can't get a signal to the other one. It is connected from the thunderbolt to its HDMI port. How can I make it work?

I have a new MAC MINI and I want to install a second monitor. I have one connected to the HDMI and it works. I can't get a signal to the other one. It is connected from the thunderbolt to its HDMI port. How can I make it work?

Could be a bad cable or bad Thunderbolt port.
You have 90 days of free telephone support on a new device. You can call them at 1-800-MY-APPLE. Have your Mini's serial number handy
You can also make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My Zoom in Gesture Doesn't Work on Safari How can i make it work?

I just bought a mac book pro 2011 and i know that the zoom in gesture used to work on safari at first but it doesnt anymore how can i make it work again?

So it does not work at all in Safari? Do you have any other web browsers installed that you could test it out on to see if it is just acting up with Safari?

Firefox will not open after i use it 3 or 4 times i have to update to make it work ?

Using XP pro after a couple years firefox quit working. will not open, went to support tried everything including a clean install. after which it worked for a short while then won't open. click on icon nothing happens. downloaded 18.0 update and installed worked a few times then quit. created new profile but when i click on firefox does not do any thing. if i run the update installer it will work for a while then quit to make it work again i have to update again ant it will work mabey for 1/2 to 1 day. after i update when firefox opens then it will give me the profile box. after it quits it will not load the profile box until i update again.

Which security software (firewall, anti-virus) do you have?
Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Just paid $6.99 for iPad highlighter at App Store. It's supposed to let me highlight things in a PDF file. I see no way to make it work in a PDF file. Thanx ahead of time for any help.

Just paid $6.99 for iPad highlighter at App Store. I can find no way to make it work in the iPad file when I call it up. It just sits there like any other app. Thanx in advance for the help. [email protected]

See if the developer has a website with intstructions. Check around in the app for instructions. They're often under settings. Contact the developer.

In Lion, sometimes clicking on close button or tabs doesn't respond as if the buttons aren't there, i have to move the cursor away and move back to make them work again, anyone can help me?

I'm not sure if anyone had run into this issue. Clicking the same place on the display sevral times will cause the click to stop working. For example, if i open safari and click on the Show Reading List button, it will work the first time i click it, but stop responding to my command as i click more, as if the button is not there, i have to move away the cursor and click somewhere else and move back to click the button to make it work again. And it happened everywhere, not just the show reading list button. The scrolling and moving are normal.
In fact, I have my trackpad replaced in an apple store for this issue but it turned out this is not a hardware problem, and it is not only my problem. Ironically, i found the same issue on several of the demo Macs inside the apple store. So anyone can help me here? Thanks.

Hi manni394, what version of Firefox are you running now?
Firefox 22 has a new way of setting the default zoom level: it is based on your Windows font size setting. So, if you set Windows fonts to 125% (enlarged 25%), your Firefox pages also will be enlarged 25%. On pages that do not adjust their layout, you may get a horizontal scroll bar.
To reduce the zoom on a page, hold Ctrl and tap the - key (the one on the numeric keypad or the one on the number row of the keyboard). The zoom should be reduced for each tap.
If you want to globally adjust your zoom level to be lower, you can use either of these add-ons:
* [https://addons.mozilla.org/firefox/addon/default-fullzoom-level/ Default FullZoom Level]
* [https://addons.mozilla.org/firefox/addon/nosquint/ NoSquint]
If you already have one of those add-ons, check the default/global zoom level in case it needs to be adjusted.

I just bought my 10 year old autistic daughter an IPOD touch that she needs to take to school with just limited music on it but she also also has an IPAD mini for home that is fulllyloaded with apps . How do I set up Itunes to make this work

I just bought my 10 year old autistic daughter an IPOD touch that she needs to take to school with just the music (no apps) on it but she also also has an IPAD mini for home that is fullly loaded with apps. The last time I tried to connect 2 devices to Itunes I ended up loosing my own music library so I am a bit hesitant to start setting up this new IPOD touch with outsome help. Anyone have any ideas on how I set up Itunes to make this work and not loose her IPAD apps and media?

Open itunes, connect ipad, select what you want, sync.
Connect ipod, select what you want, sync

Make tracks work as chapters

Similar Messages

Maybe you are looking for