Make video of kenote presentation in iOS

Is there a way to output video clips from keynote or somehow import keynote into iMovie.
Thnx

I'm not an expert by any means but I've done a number of music videos using the same software/hardware you mentioned. You can get what you want. There's an easier way and a harder way, but either way, you will have tro sync the audio to the video inside iMovie.
The easier way -- record the music the way you want to in Garageband. Mix/export to iTunes. Close Garageband. Open iMovie. Start a new project called "Whatever lYou want."  Push the camera button and shoot you playing the way you want (WHILE YOU"RE LISTENING TO THE FINISHED MUSIC TRACK on iTunes). Play well. After you're done shooting the video, open the "I" button in iMovie which is an import window. You can get the finished track in there and drag it into iMovie. Now, sync your track up to your video - LIP SYNCING it's called.
The harder way -- Basically it's the same as the easier way, the difference is you shoot the actual recording of the music instead of playing to the finished music. You will be shooting a very long time to do it without making musical mistakes. Instead of shooting from inside iMovie, use photobooth -- it's the same camera and all. But, in the end, like I said at the beginning -- you have to sync the finished track up to the video inside iMovie. But, the harder way will give you perfect syns where the easier way will be close, but not perfect. 

Similar Messages

  • Two EX90 devices can make video calls over Internet with No VCS-C and VCS-E

    Dear Experts;
    I  have just started TelePresence and VCS 2 weeks before by going through cisco docs and videos and I had taken a risk of implementing the infrastructure elements.
    We are now implementing Cisco Tele presence with VCS-C, VCS-E TMS,TCS,MCU and End points with  Jabber in One setup.
    and in another setup CUCM 10.5,UCCX 10.5 IM&P,Jabber with some 10 agents.
    Now the question is In our same building in 2nd floor we have one EX90 and in 5th Floor one EX90 and over LAN we can make video calls using IP address.
    In the same way is it possible to make  a video call between 2 EX90 devices present in different location in the same city over Internet without the involvement of VCS-C and VCS-E.
    Appreciate your valuable reply.
    Regards
    Debashis

    The simple answer to that is NO! Where is the EX90 registered to at the moment? Is it on the VCS? or CUCM

  • How to link to a youtube or vimeo video in Adobe Presenter

    I am new to using Presenter, and am having trouble inserting videos in Adobe Presenter (the videos are often over 1 hour in duration) and am wondering if it's possible to instead insert/embed the link to the video, which is hosted on either YouTube or Vimeo. Is there a simple way to do this?
    Thank you for your help!

    Hi akuswara3, thanks for your reply.
    Unfortunately, it appears that that the method I originally posted (above) is now broken in Presenter 8 and 9.  The YouTube video still plays fine, but otherwise the entire Presenter interface breaks as soon as the video is played (all clickable items stop responding).
    That being said, you don't really need to be a Flash developer to create an SWF handler for a YouTube video.  If you have access to the Flash development application, then all you need to do is
    Open Flash (from your CS6 bundle)
    Paste the above ActionScript into the "Actions Frame"
    Modify the script according to the instructions above to make the script call the desired YouTube video
    Click File->Publish to output a SWF file.
    That's it.  Google's YouTube API (and its AS3 interface) simplifies the matter, doing all the heavy lifting for us.  The end result will be a SWF file that uses the YouTube API to call, load, and play a YouTube video.  Anywhere you can embed that SWF file, you can play a YouTube video.
    Unless, of course, Adobe does something to break it. 
    Oh BTW - as for your last question.  I do believe that the newest release of Adobe Captivate allows for HTML embedding, including <iframes>.  This would effectively eliminate the problem altogether, as you could simply embed YouTube videos using the <iframe> embed code that YouTube generates for you. 
    But for now, the best way to get a YouTube into Adobe Presenter is via hyperlink (very disappointing).  Instead of a plain text hyperlink, I'd suggest a screenshot of the video and hyperlinking the image instead - or at least creating a "video button" in the PPT (better interface communication).
    Message was edited by: n.maxwell

  • Macbook Air Mavericks cannot play video in ANY presentation application

    Long ago, last year to be exact, I had a Macbook Pro 2009, with Open Office and MS Office older versions installed. They played embedded videos in both Impress and Powerpoint PERFECTLY.
    This year I bought a Macbook Air and installed Open Office 4.1.0 and MS Office 2011. Now I cannot play any of the videos in these presentations.
    I attempted to make new presentations and re-embed the videos. They play in Powerpoint fine ONCE, then not again. They do not embed at all in Open Office. The videos are all MP4 files.
    This does not appear to be either a Microsoft or Open Office issue. To me this is clearly because of my upgrades. This is extremely frustrating, as I am a college professor and need to be able to use these programs without a problem. I also use presentations in my creative work.
    Each time I find one more thing that I can no longer do with my new machine, I love Apple a little less. I hope someone can help.

    I don't understand what your point is. If I have 15 minutes to edit the post, then I should have been able to edit the post 1 minute after posting it.
    It is now 24 hours later - long past 15 minutes.

  • May I make video call to other gsm 3G supported hand set?

    Dear sir,
    I cannot make video call to other 3G hand set by using face time call ( with out iOS to iOS ).
    So, please give a new solution to make video call to any 3G supported hand set.
    Regards.
    Ekram

    I don''t think there is an app that you can use on an iphone 3G as it is too old.
    sorry.

  • Face time or make "video calls" with razr maxx?

    can you use face time or make "video calls" with razr maxx?

    Google Talk, Skype, Tango and some others are your video chat options.
    Facetime is an iOS only feature.

  • When will the full version of Keynote be available, I cant even play videos on my presentation that i made from iPad. There aren't any renewals either.

    I'm having some trouble about Keynote beta on icloud.com
    I make and edit my presentation on iPad then i send a link to present it in front of my class (on mac). But the beta can't play any videos and doesn't show any reweald i made. I wonder when will the full version of Keynote will be available on iclod.com

    Apple have not said, so we have no way of knowing.

  • Making video of ppt presentation

    I have just completed a project for a client making a movie from a power point presentation. I was given two things: 1 videos of the presenter, and 2, the actual slides. In the video I made, I often used a "picture in picture" view of the presenter next to the slide he was talking about. I used crop and distort to make his image look smaller and slanted in next to the slide.
    I would have liked to spice up the picture in picture with a little white border around it or maybe an animated squeeze of the picture to its smaller size. I was not able to apply a border to a cropped frame, just a full frame.
    Has anyone done this kind of project and what were some tricks you used to make it look more spiffy.
    You can see what I did by downloading one of the video files from www.photos.chrysalisfilms.com
    And can I attach a jpeg in this forum or do I provide a link like I did?

    I could give you an easy answer, but there is none. With something like this, there are alot of things you can do. Let you imagination run wild and then pull it back about 10 degrees. I'd give you specifics, but basically use alot of other programs to dice it up and put it back together again.
    Enjoy.

  • Sbi mobile banking is not working in iphone4. i can't make video call to other than iphone4

    sbi mobile banking is not working in iphone4. i can't make video call to other than iphone4

    What troubleshooting steps have you tried?  Have you tried resetting the iPhone? or restoring it?

  • How to record a time-limited video with Adobe AIR for iOS

    I am trying to record a time-limited video with Adobe AIR for iOS.
    For example, I want to implement the following function. Start a one-minute timer before launching CameraUI to record video. When the timeout event happens after one minute, stop recording video, close the CameraUI view and obtain the video data so far.
      I have several questions related to that.
      1. How to stop recording video from outside the CameraUI view(in this case, from the timeout event handler) and then close the CemeraUI view? As far as I know, to close the CameraUI view, the only way is to press the [Use Video] button or the [Cancel] button from inside the CameraUI view. Is it possible to close it from outside?
      2. Even if the first problem mentioned above is solved, then how can I get the video data so far(in this case, the video data before the timeout). I know that normally we can get a MediaPromise object from MediaEvent parameter of the  complete handler, and read the video data from the MediaPromise object. But obviously in this case, we can not access the MediaPromise object just because the complete handler itself will not be executed since the [Use Video] button is not pressed.
      3. Is it possible to add a stopwatch to show possible remaining recording time when CameraUI view is open? It seems that the CameraUI automatically uses the full screen of iOS device(in my case, iPad) and there is no extra space to show the stopwatch.
      Are there any solutions or workarounds about the three problem above? I really appreciate it if anyone has any idea about this. Thanks in advance.

    You'd have more control by using the Camera object, showing the camera on a video object inside a Sprite, and capturing that. Then you could put whatever graphics alongside it on the stage.. I've used FlashyWrappers in a test to capture the video to the library.  It took some work, but the test worked well...
    Flash/AIR record videos of your apps and games: Rainbow Creatures

  • Is there something to download to make videos? ..and not able to open videos

    This is probably a really stupid question, but I did a search and I can't find an answer. When I call CS they just tell me that the phone isn't set up to record videos and that they dont know why I cant open them either. Basically I have a few friends that also have curves and they can make videos and send/recieve them.  I have a video spot in my media section, its like a film roll, if I click on that I get no option to make a video, if I hit the bb button n go to options theres still no option to make videos.. I know its not a big deal.. but I miss that feature from the phone I had before. I have the whole package thing from At&T .. and I cant open messages that people send me that have a video.. I just get this message saying there is not enough space, I have a micro sd card in the phone. I'm at a loss of what to do, and CS is of no help at all... If its as simple as downloading some software thats awesome! Thanks in advance for any help or suggestions! ... oh I did find one thing about software to download but it would void the warrenty.. I'm on my fourth phone this year.. lol so if it voids it I dont care.. I get a different model next time around. =)

    Yes... copy the file to the other laptop via a flash drive or similar method.

  • How can i make a suggestion for a new IOS

    Hello everybody y would like to know if i can make any suggestion for a new IOS cause there is some new things y would like it to have.Thanks.

    Apple Feedback

  • How can I get an inserted  video (FLV) in Presenter 7 to stay on the screen once it has finished pla

    How can I get an inserted  video (FLV) in Presenter 7 to stay on the screen once it has finished playing? Right now it disappears once it is done. I'd like it to remain on the screen, or loop if possible, until the user manually moves the presentation forward.

    Hi,
    You may set the slide setting as 'Advance by user'.
    So,
    a. Insert flv on a slide.
    b. On presenter ribbon goto Slide Manager .
    c. Select the slide on which flv is inserted and set Advance by user 'Yes'
    Hope this solves your purpose.
    Thanks,
    Alpi

  • How to make use of the presentation variable in SQL result query

    I have 2 prompts in my dashboard.
    Prompt1 decides the values of Prompt2.
    I have set a presentation Variable (selected_comp) in prompt1 which holds the value selected.
    To populate the values for Prompt2, I need to execute a query using the presenation variable set by Prompt1.
    SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=@{selected_comp}
    the query is resulting into
    SQL Issued: SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=0
    but the value in selected_comp is "ABC".
    Can anybody help in how to make use of the presentation variable in query to get the correct value
    thanks
    Shubha

    Just use constrain check box to filter your 2nd prompt values based on the 1st prompt.
    Thanks,
    Venkat
    http://oraclebizint.wordpress.com

  • How to make use of variable present in sap standard FM to custom badi.

    Hi All,
    Scenario: I am using a transaction which makes use of SAP standard FM. Also I have used a zbadi to achieve my requirement. While debugging, I found that when the control goes to zbadi, i am unable to make use of the variables which are defined in standard FM.
    Now my requirement is to make use of variables present in standard FM into zbadi. Can anyone suggest me how to achieve this?
    Thanks in Advance......[:)]
    Regards,
    Vinit

    if your system is NetWeaver 7.0 (ECC 6...), then you can use enhancement framework to add your code to the function module.
    Otherwise, you can only access them if they have global scope, using ASSIGN ('(SAPLfunction group name)GLOBALVARNAME') TO <fieldsymbol> (be careful, you could change variable value, so make sure you don't)

Maybe you are looking for

  • Error message when starting OC4J after deploying

    Hi, I hope someone can help me. I've been developing a J2EE project in JBuilder9 and OC4J 9.0.3. The problem occurs when starting OC4J after the application has been deployed. I'm using two MDBs and two Session Beans, one Stateless and the other one

  • Bug: Color change of plot on wrong line

    When changing the color of a plot in a mixed signal graph, there is a graphical issue that the Plot is "previewed" on the line above. Have a look at the screenshots, it's quite obvious. We use LabVIEW 9 SP1 and are just changing to 11 SP1, but the bu

  • XMII 12.0 continued...

    SAP xMII 12.0 is powered by SAP NetWeaver Application Server (SAP NetWeaver AS). In a typical xMII Enterprise Architecture this would mean Netweaver AS on each of the plant servers & the enterprise xMII server. How would this change vis a vis xMII 11

  • Connecting to SAP Backend

    hi to all, I want to update a table in SAP backend without interfacing BAPIs from Web DynPro using JAVA.Is there any way to do the access SAPs Oracle tables directly?If yes then how efficiant would be?Pls help. Thanx Regards Vipin B.

  • Is there a way to accomplish a dynamic image insertion linkage?

    I have a cell in my spreadsheet where I have inserted a graphic, let's say .../GRAPHICS/PICTURE-1.JPG for reference. I would like the image displayed in Numbers to change dynamically by virtue of my changing the contents of .../GRAPHICS/PICTURE-1.JPG