"makequeuesagent wants to make changes" and wants my password. Should i accept that? My printer works even though i reject (Cancel).
When trying to print on my HP PSC 1510 printer i get the message: "makequeuesagent wants to make changes" and asks me to enter my password.
I have had this iMac and the printer since 2008 and the first time i have heard of "makequeuesagent".
If I click "cancel" my printjob continues without problems - but the message pops up again next time i want to print.
Should i worry about malware - or just enter my password to get rid of the message?
JGR911 wrote:
I have had this iMac and the printer since 2008 and the first time i have heard of "makequeuesagent".
If you have been printing before and no recent OS X changes, then I would highly suspect a compromised printer or drive, or perhaps a permissions problem with your Mac.
What you should do is first run through these steps to eliminate the Mac as the problem, you could be having other issues that is causing this issue.
..Step by Step to fix your Mac
Then I would check with HP support page and see if your machine requires specialised drivers installed and/if it requires a update.
I would uninstall the HP software and reinstall it with the more recent version.
Lastly if you contact HP and they have no idea why this is occuring, I would suspect a compromised printer by hackers, which has been going around lately, ask HP if there is a method to flush their printers RAM/firmware etc.
Similar Messages
-
I keep getting a message mac keeper wants to make changes type in your password. should i do this?
I keep getting a message Mac Keeper wants to make changes ,type in your password. Should I do it?
Remove "MacKeeper" as follows. First, back up all data.
"MacKeeper" has only one useful feature: it deletes itself.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Click the Uninstall MacKeeper button in the dialog that appears. All the functional components of the software will be deleted. Reboot.
Do not empty the Trash after dragging the MacKeeper application to it. Let the application delete itself.
Do not try to uninstall by dragging the MacKeeper icon in the Dock or the LaunchPad to the Trash.
Here are some general suggestions. If you want your computer to be usable, don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
The only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Never install any third-party software unless you know how to uninstall it. -
Completer wants to make changes and needs my password
I keep getting a message a is requesting I reenter my password. I s this normal? What is completer?
There should be nothing native to the OS X which would ask for a password
or other information on a restart, unless accompanied by the traditional login
box with your user name.
There are adware or marginal products that could be called malware (bad)
that would impose their presence and some items that could have been
downloaded by accident or through some corrupted free software site; of
those some could ask for and gain permission to go through your Mac
and maybe even run in the background to do other nefarious misdeeds.
You could see if startup in SafeBoot allows you access past that the Completer.
Since I don't have a pile of helpful article links on how to resolve various issues
I'd be looking them up one way or another.
There are some helpful items in the site http://thesafemac.com - see Tech Guides
listed (adware, malware, & performance) plus a link to the adwaremedic page.
Also, Apple support has a helpful page on how to remove adware and other bits:
•Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
Hopefully this helps somewhat.
Good luck & happy computing! -
Have mac book pro, OS X Yosemite 10.10.1. I get this after start up: "Completer wants to make changes. Type your password to allow this" (which I have not entered. When I cancel, there is some unknown "installer" icon on my desktop. If I move it to the trash, this all just starts over on the next time it is restarted. Have screenshots, but for some reason I can not attach to this message right now. Heard this is malware...HELP!
There is no need to download anything to solve this problem.
If Safari crashes on launch and you don't have another web browser, you should be able to launch Safari by starting up in safe mode.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
Suddenly I have problems moving files to the trash... get a dialog saying Finder wants to make changes and I must provide the password... Any explanation or ideas how I can get this to stop?
Please take these steps if you're prompted for a password when moving items in your home folder to the Trash.
1. Triple-click anywhere in the line below on this page to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above. -
Since the last software update for mountain lion, I am having a problem when trying to remove any screenshots to the trash. A box appears saying "Finder wants to make changes. Type your password to allow this"
I have checked Finder Preferences and cannot find any box that I can 'UNTICK' to resolve this. I sometimes take a lot of screenshots when I am researching something and now find I have to enter my password for every screenshot to be removed to trash.
Anyone got a solution please, ThanksHave you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
-
when installing new version of adobe flash it says that adobe wants to make changes it has my name already inserted and when put password it docent accept it
thank you but where do I get systems administrator and password from?
-
I'm running Mac OS X Version 10.7.4 on my iMac and am suddenly unable to simply move files to the trash.
Instead, I get the following message: 'Finder wants to make changes. Type your password to allow this.'
When I do enter my password, the file does not enter the Trash but seems to disappear.
I tried to find ways to revert to previous settings that allowed me to move files to the trash, but had trouble doing so.
How can I get my iMac to run normally?
Cheers! -
I loaded Mac OS X v10.7 Lion yesterday. Everything’s running fine, except for a simple problem. Any time I want to copy a file, JPEG, etc., I am prompted “Finder wants to make changes. Type your password to allow this.” I don’t want this!! Is there a way to unlock “Finder” or rid this process?
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. You can demote it back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
"Adobe Acrobat Pro [or whatever] wants to make changes. Type your password to allow this."
No doubt this is the wrong forum for this question, but there really does not appear to be "the" appropriate forum.
Every time I open Adobe Acrobat Pro, which I just installed, as well as other Adobe products, such as Photoshop, which I've used for a while, a dialog appears with the message, "Adobe Acrobat Pro [or whatever] wants to make changes. Type your password to allow this."
I searched in the forums here and saw that other users have had similar problems, but didn't find a solution. It obviously is annoying to have to enter my password every time I open Adobe products. Could someone tell me what is going on and how I can fix it?
My OS is Mac Lion.
Thank you.Do you have Acrobat 9?
If yes, please try following steps:
1. Repair your current Acrobat installation
a. Launch Acrobat
b. Go to Help->Repair Acrobat Installation
c. Check all the components and press Continue
Missing components will be repaired
2. Now, update your Acrobat.
Go to Help->Check for updates
Update your Acrobat to latest version i.e. 952
3. Again , Launch Acrobat. Acrobat would ask credentials for the first time.
4. Quit Acrobat and launch Acorbat again. Acrobat should not ask for credentials now and for all subsequent launches . Please reply if you see a different behavior. -
Website Blocker wants to make changes. Type your password to allow this.
Every time my MAC Pro starts up there is the pop-up window "Website Blocker wants to make changes. Type your password to allow this."
I'm running Yosemite, but the problem also existed in Maverick. This happens even before any application is started.
If I type my password the window closes but will appear again at the next start up.
Did anybody see this problem before?I have exactly the same problem. It keeps asking for the admin password whenever I delete a file. Annoying! And guess what , after typing in the PW and deleting the file, the trash can is still empty! The deleted files just disappeared!!
So I checked my permissions, everything looked fine (i have perfect read and write rights), but i still used the Disk Utility to repair the permission, but it didn't solve the problem.
I read some article online, saying that BatChmod can crack it. I downloaded the file and tried it, well, it worked 50%, I now see the deleted files sitting in the trash can, but I still have to type in PW to delete files.....
This problem just came up today out of the blue, I'm not using any mobile disk or network disk by the way...
So anyone have any idea how to fix this annoying thingy?
Thanks in advance!
Nikki -
Desktop to Trash Problem: "Finder wants to make changes. Type your password to allow this."
Suddenly today I get a dialog box stating "Finder wants to make changes. Type your password to allow this," whenever I attempt to drag a file from the desktop into the Trash on the dock. How can I stop this and return to a normal function of dragging desktop files into the trash? Thanks in advance.
Back up all data now.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
Step 1
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select ▹ Restart from the menu bar. -
Not sure this is from Apple. When I restart I get the following message:
Completer wants to make changes.
Type your password to allow this.Check the links below for options to remove the Adware
http://www.adwaremedic.com/index.php
Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support -
When I right-click on a file to "Move to Trash", I get the following message:
"Finder wants to make changes. Type your password to allow this."
It then deletes the file bypassing the Trash basket.Maybe this will help:
https://discussions.apple.com/message/20499360#20499360
Monitor the "More Like This" box for other solutions. -
Install Flash Player wants to make changes. Type in password to allow this.
What is my password for this installation. When I sign in, my password comes up automatically, so I don't know what it is.
This password prompt is presented by your operating system, and is intended to keep you from accidentally installing software.
If this is your personal machine and you don't need a password to log into the computer when it first starts up, you can probably leave the password blank and click OK to get past this prompt. If this is your personal machine and your normal password isn't working, check to make sure that CAPS LOCK is off, and type the password carefully.
If this is your work machine and it's asking for an Administrator password, well, you'll need to have a conversation with your friendly IT person.
If you're still stumped, you may need to reset the password on your Mac:
http://support.apple.com/kb/PH18653
http://support.apple.com/kb/PH14325
http://support.apple.com/en-us/HT201240
Maybe you are looking for
-
Find Billing Document of Cancelled Excise Invoice
Dear All, How we can find out billing document of cancelled excise invoice? Please help. Regards H.P.
-
Installing driver hp deskjet 1180c using window 8
Is it any compactibility driver that i can use or any update driver. please advised
-
Why won't Photoshop Elements 11 and Premier Elements 11 load ?
I just purchased Photoshop Elements 11 and Premier Elements 11. I have Windows 7pro, have the disc for Windows and have the serial numbers for both programs. When I put the disc in, I can't get past the welcome screen. Why?
-
Output Determination - Goods receipt for Subcon PO
Hi experts, I have configured output for Goods receipt for PO. Its working fine for standard PO. But not working for Goods receipt for Subcon PO. In MN21 - i maintained condition record - Trans / Event Type - WO Print Version - 3 Could you help me t
-
Flash button play over sound in both over and down states?
I have created a button and set a sound on it for the over state. The sound plays correctly when the button enters the over state, but it plays again when the button enters the down state. Here's what I did as a test: In an empty Flash9/ActionScript3