Makes too much noise as soon as I switch it on and never stops and takes a long time to shut down

Makes too much irritating background noise that makes it impossible to record the audio for my videos

Hi,
May I know thw error code displayed in the problematic wan miniport drivers? Code 720 as in the link you post above or other error code?
This link can be helpful for further troubleshooting (please create a restore point before making changs to the system in case any incorrect operations can cause unexpected issue)
Fix Broken Wan miniports
http://community.spiceworks.com/how_to/show/55611-fix-broken-wan-miniports
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Similar Messages

Why does Mountain Lion take a long time to shut down my MacBook Air when I chose "Shut Down?" Much longer than before the upgrade.

Mountain Lion takes a long time to shut down. Much longer then Lion.
Any comments appreciated.
Alan

The honeymoon is over?

Too much noise!!

hi, i have a dual 1gb quicksilver 2002, the fan are terrible... too much noise!
i hear about a kit (easy to put into my mac) that makes the fan not so much noise, can you give me the link of the seller?
thank you so much
igor

Picturegal wrote:
Canon support suggested it might be because I had the "Auto Lighting Optimizer" feature set to "Strong". I didn't even realize that setting existed, but I change it to "none". Unfortunately, I haven't had a blue sky to photograph since I made the change, so I can't tell yet if it helped. Is that what you mean by High Tone Priority, or is that a different setting?
Hi,
Auto Lighting Optimizer and Highlight Tone Priority are useful functions, but it's very likely to get noiser images (in dark areas) if you enable any of them. Especially if you had ALO set to "strong".
Shoot the same scene with and without any of those functions enabled and you'll see the difference.
When they're well used they can give you great result, but you have to be careful to avoid excesive noise increase in dark areas.
Regards.
HD Cam Team
Group of photographers and filmmakers using Canon cameras for serious purposes.
www.hdcamteam.com | www.twitter.com/HDCamTeam | www.facebook.com/HDCamTeam

Is your superdrive making too much noise?

i'm just a bit concern when i play dvd on my new powerbook, it is making too much noise. sometimes it fails to play the dvd because of scratches(which i can't see it at all). my computer would stuck at the same image for about 3 minutes or more and i have to force the computer to shut down by holding the startup button. there are times when it would not eject the dvd out as well. any opinions? just quite frustrated. thanks

I am suffering from part of the problems you mentioned.
The SD itself is not noisy when DVD are playing.
But after pausing the movie, then it fails to resume with really strange noises (as if the head was "bumping" on the disk). Then I cannot eject the disk (the drive will apparently loop on noisy attemps to resume), and I have to reboot the PB.
I am also suffering for very frequent "disk rejection" (disk ejected after load without it appearing on the Finder), not only with DVDs, but also with regular Audio CDs (including clean unscratched ones)

Fire fox crashes and freezes if i use it too much (kind of a good thing). For example if i use stumble fire fox will start to slow down then freeze completely. Does anyone have a solution or should i just switch to chrome?

Fire fox crashes and freezes if i use it too much (kind of a good thing). For example if i use stumble fire fox will start to slow down then freeze completely. I am using windows XP pro and a pretty decent computer. All software is up to date and i do no have a virus. I have even tried to disable my add-ons and plug-ins but it did not make a difference. Does anyone have a solution or should i just switch to chrome?

Please provide a crash id -> https://developer.mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report
Do the issues still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode

All I want is all my contacts on my phone and the same on my iMac, but no, that's too much to ask, instead I get everything doubled up on the phone and everything doubled up (triple in some cases) on the iMac, why does it do this? and more importantly how

All I want is all my contacts on my phone and the same on my iMac, but no, that's too much to ask, instead I get everything doubled up on the phone and everything doubled up (triple in some cases) on the iMac, why does it do this? and more importantly how can I stop it? Thanks

Look under system preferences on the mac at what is be controlled? Look at Mail, Contacts, Calendars. How many accounts are managing contacts? Just the cloud? the cloud and gmail? or cloud, gmail, yahoo, and exchange? If you have more than one contact account, then you will have different contact lists, if John Smith shows up in more than one of your contact lists, you will have multiple entries.
Pick a contact list that is your master, (I use iCloud), only turn on contact syncing for it. The same for your phone. Spend some time on the iCloud webset (www.icloud.com) and work on your contact list there. Clean it up, remove duplicates, etc...Changes will auto sync back to all your devices. Life gets much simplier.
Just remember, if you sync different contacts lists and a large number of people appear in your different lists, then they will appear as duplicates.

I cannot update my software because I have too much 'other' GB space. Does anyone know what the 'other' is and how do I get rid of it?

I cannot update my software because I have too much 'other' GB space. Does anyone know what the 'other' is and how do I get rid of it?

COPirateDad wrote:
I have been trying to figure out what ... is occupying over 1.4 GB of memory on my iPhone
Other is usually around 1 GB...
See Here > maclife.com/how_remove_other_data_your_iphone
More Info about ‘Other’ in this Discussion
https://discussions.apple.com/message/19958116

I have too much music on my i phone( purchased): This synchronises with my computer and i pad which has larger storage facility: How can I delete music only from my i phone and retain it on my computer and ipad?

I have too much music on my i phone( purchased): This synchronises with my computer and i pad which has larger storage facility: How can I delete music only from my i phone and retain it on my computer and ipad?

On the iPhone, go to Settings > General > Usage > Music (in the Storage Section) > Tap Edit > Tap the Red Circle next to All Music > Tap Delete.

HT1349 So everything on this page relates to Apple products. I am running a Sony laptop with Windows and as soon as I install iCloud desktop iTunes has stopped working. The only time I ever needed it. GREAT! Do you do this on purpose?

So everything on this page relates to Apple products. I am running a Sony laptop with Windows and as soon as I install iCloud desktop iTunes has stopped working. The only time I ever needed it. GREAT! Do you do this on purpose?

The latest version of iTunes tends to act up occassionaly. See this support document http://support.apple.com/kb/HT1923 and remove and reinstall iTunes. This will not affect your music library, apps or other content in iTunes. Make sure you follow the steps exactly.
Also, just copying the ringtone will not get it into your phone. iPhone ringtones have an extension of m4r, and you have to first take the Media player file and covert it to an AAC version. From there you need to change the extension from m4a to m4r. If you cannot see file extensions in Windows Explorer, which is actually the default action, go into Organize>Folder and search options, then hit the View tab, and then remove the checkmark by hide file extensions from known file types. After you have created the m4a version and changed the file extension, you can double-click on it and it should show up in the Tones folder in iTunes. From there, sync the phone and it should show up in the list of ringtones.

I have pluged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?

I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
Help.

BB1B2,
The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
Sorry,
Clinton

Takes a long time to load mlb website...and then slow to change from one place to another in the site...much quicker w. ie...any ideas on how to speed up? thanks drew

i know it has lots going on w/ videos etc but still is painstaking slow w/ firefox

Hi AquilaXXIII,
What server edition you are using? If you are using 2012r2 as cluster node, please install Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
update first,
Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
http://social.technet.microsoft.com/Forums/en-US/f9c1a5f7-4fcf-409a-8d7e-388b85512bfe/new-lun-takes-a-long-time-to-format-and-errors-out?forum=winserv
Before you install the new shared storage please first validation this storage first, you can refer the following KB to validation the new LUN.
Understanding Cluster Validation Tests: Storage
http://technet.microsoft.com/en-us/library/cc771259.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I try to make update for my iphone and start showing itunes need to be connected and never start and i connect my phone on itunes but it say need to be format for phone .please help me .

I try to make update for my iphone and start showing itunes need to be connected and never start and i connect my phone on itunes but it say need to be format for phone .please help me .

Hello Huss87bash,
This screen indicates that the device is in recovery mode, and must be restored in iTunes before it can be used again.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Once the device has been restored, you should be able to restore your device from a backup to replace all of your content and settings.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Cheers,
Allen

It takes much longer time to power down.

Since i upgraded to mountainlion it takes much longer time to power down. As if the harddisk is being scanned. Anyone any thoughts on that ?
greetz,

Since i upgraded to mountainlion it takes much longer time to power down. As if the harddisk is being scanned. Anyone any thoughts on that ?
greetz,

2011 Macbook Pro suddenly says no space available on start-up disk (plenty available) and USB drawing too much power (only charging phone). What's going on with my computer? No longer able to charge my iPhone 5.

Hi, all.
Two days ago I was using my computer, a 2011 Macbook Pro, and suddenly got the error message reading "Your Mac OS X startup disk has no more space available for application memory. To avoid problems with your computer, quit any applications you are not using. Closing windows and removing files from your startup disk will also help."
I was only using Google Chrome, nothing was running in the background, and I have 443 of 449.25 GB available (this is after clean-up I conducted after receiving the error message, but probably cleaned up less than 25 GB), so there should be no shortage of space. However, the message kept popping up and I deleted a few files and eventually it went away and hasn't reappeared.
However, last night and then again this morning I have been getting the error message that my USB drive is pulling too much power and has been disable. All that was plugged in was my iPhone 5 on the charger and my computer is also on its charger, so I don't know why this would be an issue, either. I have always charged my phone this way and never had a problem until today.
I haven't been able to charge my phone since. What's going on with my computer?

Regarding the USB, see if zapping the PRAM helps.
Regarding your storage space check out the following:
HD Space Checkers:
Disk Inventory X (FREE)
WhatSize (SHAREWARE)
OmniDiskSweeper (FREE)
GrandPerspective (FREE - donation)
Mac Performance Guide
Slimming your hard drive
===============
Quick fix How To Quickly Free Up Hard Drive Space on Mac OS
http://www.youtube.com/watch?v=fO-mlLApEuk

I just got an iPad 2 16 gb and was wondering how I can upload pictures from a micro sd card but my iPad is saying cannot connect device using too much power. I have tried a 16 gb micro sd card and 4 gb micro sd card. Can anyone help please??

I got an iPad 2 and I cannot get my pictures to upload from a micro sd card as the iPad is saying device not accepted using too much power. Can anyone help? My iPad 2 is a 16 gb and my micro sd card is 4 gb

You can use a USB flash drive & the camera connection kit. First download the pics to your computer.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
 Cheers, Tom

Makes too much noise as soon as I switch it on and never stops and takes a long time to shut down

Similar Messages

Maybe you are looking for