(makeshift) case for the iPad Camera Connection Kit?
Has anyone found anything that would make a good case for the iPad Camera Connection Kit? i'm afraid I will lose mine if i don't put it in something, but i do want to keep it small
Go to the dollar store & get a cheap cell phone case. You might be able to get a case large enough that will also store the USB cable.
Cheers, Tom
Similar Messages
-
I have a Nikon Coolpix P500 but am unable to download photos from it to my iPad2 via the iPad Camera Connection kit. The iPad does not see either the Sandisk 8GB card or the Nikon camera. I have turned the camera on, but it seems that the camera just want to recharge its battery through the iPad as the iPad states that the devices draws too much power?? Anybodu solved this problem yet? Advise please?
One thing to check is the format that the camera is saving pics to the card in. Many are selectable and, in most cases, if PTP is one of the options then you need to have that one selected for the files to be visible to iOS and the CCK (connection kit).
Another thing which sometimes comes up, especially with older cameras and therefore probably not with yours, is the filenaming conventions used by the camera. iOS is quite strict about what it expects to see and if files are being stored with unsupported name formats then they simply won't be seen at all. -
I don't have a wireless printer, and want to print things off of my iPad. I know that I can use the iPad Camera Connection kit to connect USB devices like keyboards and I am wondering if I could do the same with a USB printer.
I don't think you can connect a printer since you won't have the printer drivers. I use FingerPrint from collobos.com to print to my non-AirPrint printers.
-
Does the IPad camera connection kit work with the Ipad 4 and /or is the an adapter ?
You want the newer Lightning to USB Camera Adaptor.
http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter
The old Camera Connection Kit also works and I use it on my iPad 4, however, to use this your will need the Lightning to 30 pin adaptor.
http://store.apple.com/us/product/MD824ZM/A/lightning-to-30-pin-adapter-02-m -
Is there some way to make the iPad Camera Connection Kit work on the iPod touch?
I bought the Camera Connection Kit because a tech said it would work with my iPod Touch, but I get the message that the iPod does not support that connection. I would really like itt to work because I have used an older iPod to back up photos while on vacation. I would simply connect the camera up to the iPod and it would download all the photos from the camera. It was an excellent way not to have to buy lots of SD cards. This kit has a slot for an SD card and I could copy directly from that. So if anyone out there knows how I could make it work, I'd appreciate your input.
Is your MacBook Pro new? Did it come with Lion preinstalled? If not do you have the iDVD application in the Applications folder?
If not I suggest you purchase a copy of the iLife 11 disk from Amazon.com or eBay.com or other 3rd party supplier. Apple does not sell iDVD any more and those items are getting harder to get.
Once you obtain iDVD go to iPhoto and bring up the slideshow. Then use the Share ➙ iDVD menu option. That will send the slideshow to iDVD from which you can burn a video DVD disk.
I suggest you follow this workflow while working in iDVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT -
Will the iPad Camera Connection Kit work with the iPhone 4?
Subject says it all, wondering if this will work....
GJMNo, please search.
http://www.tipb.com/2010/06/26/iphone-4-support-ipad-camera-kit/ -
Is the iPad camera connection kit compatible with iPod touch 4?
It has the 30 pin connector, so it it compatible with iPod touch 4?
No. You get an error that says not supported.
-
Why can I not load pictures from a micro SD 64gb using scan disk adapter plugged into an Apple iPad camera connection kit. I have the iPhoto app but pictures not being seen on iPad. So incredibly frustrating. Apple please fix this.
Do you have a smaller capacity micro SD card to try? I seem to remember from past posts that users were having problems with cards larger than 32GB, however, Apple's page doesn't mention this.
Using The iPad Camera Connection Kit
http://support.apple.com/kb/HT4101
What format are the pics - jpg or raw?
Cheers, Tom -
Is there a limit on the size of SDHC card that can be read with the iPad camera connection kit?
I've successfully connected 32 gig SDHC and CF cards so if there is an upper limit, it's at least 32 gig.
I know SDXC will not work.
With the cards that don't work, have they been formatted correctly? the camera connection kit will only read cards holding images. (Well, it'll only see the images) And those images have to have a file name of exactly 8 characters (DSC_2342 for example) and they have to be in a folder named DCIM.
Anything else it wont' read.
I put a photo on there called 'Christmas' and the connection kit won't see it. I put a photo on there in the DCIM folder named XMAS2342 it'll see that.
So it's possible that those cards weren't read because they weren't speaking the right language. -
IPad Camera Connection Kit doesn't work
Some time ago I ordered from the Apple Store an iPad Camera Connection Kit.
This morning, when testing it, the following happens :
- SD card reader : when testing the SD card reader with the card from our camera, the message below is displayed :
"Contents not available
Cannot read the connected storage media"
Strange, as the camera has taken hundreds of pictures, and when checking the card on my MBA I can access the card's subfolders without any problem.
- USB camera connector :This works well (with the same card as mentioned above plugged into the camera).
Does anyone have experience with the SD card reader ?
Thanks.
Note : in the iPad Camera Connection Kit documentation, reference is made to the iPad user guide. However, that user guide, a circular reference is made to the connection kit documentation.Is the SD card one that was formatted by your camera? In order for the CCK to read the card, all the photos need to be in a directory name DCIM and they need to have 8-character file names. This is the way digital cameras generally format things. However, if you put the photos on the card yourself, you might have done it differently.
I use the SD card reader quite a bit as it's easier for me than keeping track of yet another cable. Once or twice, my iPad didn't see it. A reset of the iPad fixed that. Press and hold the Home button and the power button until the silver apple appears. -
IPad camera connect kit and iPhone 4
Will you be able to use the SD version of the iPad camera connection kit with the iPhone 4 to transfer photos to the iPhone?
TIAI have both iPad Wifi 64GB and iPhone4 16GB. Apple did this one right. Just plug in the camera connector with USB to the iPad, use your 30 pin to USB iPhone4 connector, and the videos/photos on the iPhone4 show right up in the iPad, select and transfer.
This means you can record on the iPhone4, HD video, and view it on the iPad. Yes, some will grouse that the camera should be on the iPad, and one day it will be. For now, however, the two are a great duo. I'm taking them both to China, with a Blue Mikey for CD quality audio.
I wish iMovie for iPhone4 was so good. It is not, yet, not nearly. Very disappointing. -
I had no problem importing photos to my iPad using the iPad camera connection kit, but now that they are there, I can not get them back off of my iPad. I have set up an iCloud account and enabled Photo Stream on my iPad, downloaded and installed the iCLoud control pannel for Windows, enabled Photo Stream there, and set the download and upload folders. In my "Photos" on iPad I curently have 3 albums: Camera Roll, All Imported, and a sigle folder with some of the photos included in the "All Imported" folder. If I select Photo Stream, there are no photos present, and the note at the bottom explains that it uploads and stores the last 30 days of photos on iCloud and downloads them to all my devides... except.. I just enabled iCloud, and the pix were imported 6 months ago. I really see no logical way of getting them back off this device. Can anyone help highlight what I have overlooked? Thanks. -njw
Never mind... when all else fails... use a cable. D'Ohhh...
-
IPad camera connection kit is working on ios 6.1.3 or no?
Hello everyone,
I'm trying to find an answer to this question
Is iPad camera connection kit working on the new update iOS 6.1.3?
I need to know this kinda urgent now, because my iPad has been acting really weird, but I hadn't update yet, because I'm scared my camera connection kit won't work anymore, and I need it alot because I work with cameras.
Anyone who already update and the camera connection kit still working? Please
I have an iPad 2 currently iOS 6
Have a great day!Works on my iPad 2 also. I transfer pics/videos using an SDHC card and also using a USB flash drive.
To use a flash drive, Plug the flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
Cheers, Tom -
I recently purchased an iPad camera connection kit hoping to directly download pictures from my camera to my iPad. When I put my memory card into the adapter and plug it in to my iPad nothing happens. My camera is a Sony Cybershot and the memory card is a Sony memory stick PRO duo 512 mb. I don't think I am doing anything incorrect. Is my camera/memory card incompatible with this adapter?
The Camera Connection Kit works with SD cards, not Memory Sticks.
Maybe you can find an MS to SD adapter, or use the USB connection with the USB cable that came with the camera. -
RAW picture previews loading extremely slow since IOS 8 using the Apple iPad Camera Connection Kit
Hi all
First, sorry for my poor english, I hope you understand my problem.
Device is iPad Air Wi-Fi with IOS 8.
I just realized this issue yesterday. I wanted to import some of my RAW pictures from my Nikon camera's SD card, using the Apple iPad Camera Connection Kit. In the Photos app / Import tab, the RAW picture previews show extremely slow. It takes a second to show each photo preview before import. A second for every single picture preview
For example, if you have 500 pictures on your SD card, and you want to import pictures from this card but just some selected, then you need to wait for an overview preview a lot of minutes. On IOS 7 this process was maybe 10 seconds for all of the pictures...Same problem here. As a professional wedding photographer, sifting through my photos while on the go is the reason for me purchasing the iPad (Retina) 2 years ago, I now have an $800 paperweight after iOS8.x.x. Apple, if you actually read these, please inform your engineers to fix this in the next update or at least provide us with a solution to return to iOS7.x.x. Makes me wonder if there is any QA or testing that goes on before an update is released. As an FYI, here's my thread from a few weeks ago: Native Photos App, Slow... No, I mean really slow.
Maybe you are looking for
-
Singleton? Don't want to keep reading database
Hi there, I have a java web application, when it starts up I want it to load some information into a singleton so that all requests for this information come from memory not via a database call. The information will change very infrequently but I don
-
Hi All, We are Using our Application Developed in J2EE to run on Oracle 10g application server. We were getting problem/error in saving the Records when we access the Application with DNS so we have changed the apache/httpd.conf 's "canonical" settin
-
Mac mini with a Panasonic 42" plasma screen
I am new to macs to bear with me. I am trying to connect a mac-mini to a Panasonic 42" plasma screen (TH-42PX20) According to the Panasonic manual the max resolution is 1024x768 with a 16:9 aspect ratio. The plasma screen connects to the mac with a D
-
Need help with Java Programming
Hello All, I dont know how to save all the lines separatly and then work with the numbers? Example TxtIn: 2 5 0 9 2 3 4 // I dont know how many lines will appear, and dont know how many numbers in a line 1 2 3 9 1 5 4 2 0 0 5 6 2 5 1 9 4 6 1 5 4 9 1
-
Seprating select options in two view containers.
Hi Gurus, I have 4 fields which are select option based. I want 2 fields in one view_container_ui element. Other 2 fields in other view_container_ui element. Presenlty when i am creating 4 select option fields by coding it is appearing in one view_c