Making 2 Raid Systems on 1 Machine

G5 Dual 2.5gig PPC
This may be a little more technical then this board can handle as it was asked on different thead with plenty of looks but no suggestions, so i'll try here and hope more knowledge lives in this part of town.
How to?
I have a Raid 0 (striped) and set up on 4 internal drives.
I have a Sonnet Tempo-X esata 4+4 board.
It allows you to set up 4 internal drives as a raid 0 and 4 drives externally in a SATA enclosure as a Raid.
That would be 2 seperate Raid Systems.
The Problem is Disc Utilities in 10.3.9 won't allow building a second 2nd raid.
I know in 10.4 it will but I DO NOT WANT 10.4 on the system.
Does anyone out there know what to do here? or how to do this?
Thanks

Alright... so now
I see my other computer "iMac" in the Finders Window of the laptop
It makes me connect to the system which is always has in the past.
I opened the External HD up for sharing within the File Sharing under systems properties.
If I wanted to move something from my, Say "Desktop" into the external hard drive will I continually need to log onto the iMac and move the file to the hard drive which is now available.
I figured that the External HD would just constantly show under shared devices on my laptop at all times considering it's a shared device.
Still not certain that I have all aspects correct. I've even went under the "side window" of the share devices and made certain that EX HD's are checked for viewing.

Similar Messages

Restoring my System with Time Machine to a new HD without the Snow Leopard DVD

Hi there,
I changed my HD in my MacBook Pro to a bigger one and then wanted to Restore the System via Time Machine onto that new HD. Sadly I dont have the Snow Leopard DVD that was coming with the MacBook. Though I have another Snow Leopard DVD, that I purchased earlier for my older Mac. Now the Problem:
When I try to Boot the Macbook Pro from the older Snow Leopard DVD it always freezes and says: "You have to restart your Macbook. Press the power button until it switches off and then press the button again". But iwill not boot from the DVD.
Is there another possibility to Restore my System from my Time Machine Backup to the new HD?
Kind Regards
Lounginbob

lounginBob wrote:
Though I have another Snow Leopard DVD, that I purchased earlier for my older Mac.
You can't use a machine specific OS X install disk with another model of Mac.
It has to do with hardware drivers being on one disk and not applicable to another machine, why you get the kernel panic.
Is there another possibility to Restore my System from my Time Machine Backup to the new HD?
No. You need the OS X install disk.
Choices depending on what your machine is:
1: If your machine with the missing OS X install disk originally came with 10.6.3 or later, call Apple for machine specific replacement disks, there will be a fee of course. That's the only ones that will work.
2: If your machine originally came with 10.6.2 or earlier, you can choose to buy the 10.6.3 retail disk from Apple online, however it contains no free iLife. It comes faster.
3: If your machine originally came with 10.0 - 10.6.2, and you want the free iLife, then order the machine specific versions from Apple, however it might take longer.
4: If your machine originally came with 10.5, and your now on 10.6.x via the 10.6.3 retail disk, you can extract the free iLife from the 10.5 disks using Pacifist from CharlesSoft if you don't want to buy iLife.
You will need this disk regardless in case you need to #18 Reinstall Just OS X or #20 Erase and Install OS X or perform #4-#6 repair proceedures:
Step by Step to fix your Mac
Is there another possibility...
Yes, once you have gotten a new OS X install disk, consider making bootable clones.
It's software that can clone your entire OS X drive/partition (no Bootcamp or Filevaulted) to another external drive and you can easily hold the option key to boot from it.
Most commonly used backup methods explained

PP Crashing when opening collected project from a RAID system on a single drive system

Hello,
I have a very serious problem with Premiere Pro. I've created a project in Premiere Pro CC on a Windows 7 system, utilizing a RAID system.
Today I collected the project from that machine to an external HDD in order to transfer the project to my computer, running Premiere Pro CC 2014 on Windows 8.1 - no RAID configuration, just a single HDD. After converting the project to CC 2014, Premiere Pro crashes and has to close.
I believe there's a bug/problem/issue with transferring RAID projects to non-RAID machines in general, since a collaborator of mine had the exact same problem with the exact same project file (and a bunch of other project files that essentially were previous versions of the project file I have a problem with).
Is there any explanation to this? And probably any fix?
Thanks!

What could be in my project that makes it unable to open?

Making a login system

Making a login system with flex.
i have registration in one panel and login in another panel,
basicly in the same application,
But since il be calling the same username i register, i can
only use the same id for that input feild in both REGISTRATION and
LOGIN but i get a 'identifier already in use' , cant get my head
for a work around.
please help
using something like this
http://www.vipercreations.com/tutorials/Adobe%20Flex/28.html

ntsii can u give me an example for declaring a textInput with
an id at application level then refrencing it
my code
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:states>
<mx:State name="Logged In">
<mx:SetProperty target="{panel1}" name="width"
value="95%"/>
<mx:SetProperty target="{panel1}" name="height"
value="95%"/>
<mx:RemoveChild target="{password}"/>
<mx:RemoveChild target="{username}"/>
<mx:RemoveChild target="{label1}"/>
<mx:RemoveChild target="{Submit}"/>
<mx:RemoveChild target="{label2}"/>
<mx:SetProperty target="{panel1}" name="title"
value="Members Section"/>
<mx:AddChild relativeTo="{panel1}"
position="lastChild">
<mx:Label x="10" y="10" text="Welcome to the Members
Section!"/>
</mx:AddChild>
<mx:AddChild relativeTo="{panel1}"
position="lastChild">
<mx:Label x="10" y="36" text="Here you can do great
things, like join the forums @ Viper Creations!"/>
</mx:AddChild>
<mx:AddChild relativeTo="{panel1}"
position="lastChild">
<mx:Label x="10" y="62" text="Label"/>
</mx:AddChild>
</mx:State>
</mx:states>
<mx:Script>
<![CDATA[
import mx.rpc.events.ResultEvent;
import mx.controls.Alert;
]]>
</mx:Script>
<mx:Script>
<![CDATA[
private function checkLogin(evt:ResultEvent):void
if(evt.result.loginsuccess == "yes")
currentState = "Logged In";
if(evt.result.loginsuccess == "no")
mx.controls.Alert.show('Invalid username/password');
]]>
</mx:Script>
<mx:HTTPService id="login_user"
result="checkLogin(event)" showBusyCursor="true" method="POST"
url="
http://www.phobos-machines.com/login/bin/request.php"
useProxy="false">
<mx:request xmlns="">
<username>
{username.text}
</username>
<password>
{password.text}
</password>
</mx:request>
</mx:HTTPService>
<mx:Panel resizeEffect="Resize" width="250" height="200"
layout="absolute" title="Login System" horizontalCenter="0"
verticalCenter="-2" id="panel1">
<mx:Label x="10" y="10" text="Username:" id="label1"/>
<mx:TextInput x="10" y="36" id="username"/>
<mx:Label x="10" y="66" text="Password:" id="label2"/>
<mx:TextInput x="10" y="92" id="password"
displayAsPassword="true"/>
<mx:Button x="10" y="122" label="Submit" id="Submit"
click="login_user.send();"/>
</mx:Panel>

<mx:HTTPService id="login" showBusyCursor="true"
method="POST" url="
http://www.phobos-machines.com/login/bin/request.php"
useProxy="false">
<mx:request xmlns="">
<username>
{username2.text}
</username>
<password>
{password2.text}
</password>
</mx:request>
</mx:HTTPService>
<mx:Panel x="30" y="10" width="380" height="270"
layout="absolute">
<mx:Form x="10" y="19" width="328" height="187">
<mx:FormItem label="username">
<mx:TextInput id="username2" width="100%"/>
</mx:FormItem>
<mx:FormItem label="Password">
<mx:TextInput id="password2" width="100%"
displayAsPassword="true"/>
</mx:FormItem>
<mx:FormItem>
<mx:Button label="Submit"
click="login.send(),Alert.show('User Registered',
'Registration',mx.controls.Alert.OK);"/>
</mx:FormItem>
</mx:Form>
<mx:FormHeading x="0" y="0" label="Registration"/>
</mx:Panel>
</mx:Application>

How to: make one or two partions at a raid system?

Hey
how can i make one or more a partions at a raid system?
i will make the partions at a 250gb raid. one with 120gb for the bootsector, and the other for documents, etc.
is there a hwo to anywhere? dont find one?
please read my second question.... 2 raids at one mac pro?
regarads

O.K., i was looking the hole day to get that partions on a raid working.
to make the partions on each HD with the same volume, this is no problem. when you then create the first raid, works fine. but when you make the second raid, you get a massage, that this raid is not found.
then you see both raids at the disc utilty, but only at the first you seen the volumen down under, by the second not. the first works, the second is not avabiele.
so, now i have only one big mirrowed raid for my boot sector, and its runs fast, quick and without big noise... thats what i want, and the second big raid for my files.
2 raids at one mac pro with 4 hd. one with 2 x 250 gb hd for the bootsector, and the other with 2 x 500gb for files
thx to all, and you kappy
regards

Macbook Pro: How do I set up a RAID system?

Macbook Pro: How do I set up a RAID system on a MACBOOK PRO properly?
Can I have the OS on the same drives or does it need to be seperate?
I mostly want to do this becuase I am having a lot of problems with the "spinning ball of death" and slow speeds. I have my RAM maxed out at 6Gigs and my 7200rpm 750GB HD is about half full.
Am I correct in trying to do an external RAID Drive to help with speed?
If yes, what is the best way to do this and which type of connection (USB, Firewire, etc) is best to use?
Thanks!

Edward House
Edward House
Am I correct in trying to do an external RAID Drive to help with speed?
No
Why is my computer slow?

Problem with fibre channel card and raid system after upgrading to 10.4.7

Hello, I have a problem with our Xserve G4 DP. After the installation of 10.4.7 everything works fine exept our fibre channel card. This card is connected to a Hitachi Raid System which worked fine over a year. But after the update the volume was no longer mounted. I even reinstalled the server to 10.4.4 and no sign of our raid volume. Using the apple fibre channel utiltiy 2.0, I see that there is a connection - but still the raid volume is not mounted. When I restart the server the lights on the back of the card are shortly flickering and sending some packets to the raid system but that´s all. Has anybody an idea?
Greetings from Heidelberg
Klaus
Xserve G4 DP 1 GHz Mac OS X (10.4.6) Mac OSX Server 10.4.7

You could re-update, by downloading the 10.4.7 Combination Updater from Apple.

Restored system from Time Machine backup disk but the system could not start-up

On MacBook Pro early 2008, restored the entire system from Time Machine backup disk to the entire disk.
The previous system on the backup disk had FileVault turned on.
The restore completed successfully and I was prompted to restart the system via the new restored system disk.
I heard the normal start-up sound, then the Apple logo, but it stuck at the logo screen. And the cooling fan run at almost full speed?
I have been waiting for a few hours, guessing it might FileVault the disk.
Finally I have to shutdown the machine as it stuck at the logo screen forever.
Anyone has the same issue? Any ideas?

BTW, I also tried Repair the system disk, Fix permissions via Disk Utility.
I guess I must lose some files either during the backup or the restore.

Do I need a RAID system or just a larger external hard drive

Hi guys... I am working in my fathers company and running the media side of our small business. I do our website, print media and also our video production....
I have an iMac and it is running on 500gig of storage and 8meg of RAM.... I have almost filled up my hard drive and I am looking into to getting into to doing a lot more video work....
I need more storage, but I am not sure whether to invest in a RAID system or should I just get an external hard drive...
At what point is a RAID worth the investment ?
Thanks guys
Harrison

RAID provides a level of redundacy should one of the hard drives in the array fail.
I would only invest in RAID if you are able to support the RAID array and understand its limitations.
Remember RAID is not backup. Don't be complacent about backup.
A larger hard disk is simplier to manage than a RAID array.
As with any mission critical data, you need a robust backup strategy.

OS 10.6 - Please help - problem restoring system from time machine!

Hi there,
Today I installed a little program to convert flac audio files to mp3. When I ran the program the computer froze, so I rebooted but then I could move the cursor but not click on any menus or icons on the desktop, they just wouldnt respond - so basically I couldnt use the computer. After re-booting a few times with the same result I decided to reinstall the system using time machine from an external hard drive. I reinstalled OSX, then reinstalled Snow Leopard, then reinstalled the system from a previous save from Time Machine. It said the installation was successful, but when the computer restarted a message comes up saying "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again". Ive done this about 5 times now but it always just says the same message without starting properly. WHAT DO I DO???? I really need to use my computer tomorrow so any help is hugely appreciated!!! TIA
PS. i have done a hardware test in "loop mode" and it says everything is fine

HiDef Jules wrote:
Hi there,
Today I installed a little program to convert flac audio files to mp3. When I ran the program the computer froze, so I rebooted but then I could move the cursor but not click on any menus or icons on the desktop, they just wouldnt respond - so basically I couldnt use the computer. After re-booting a few times with the same result I decided to reinstall the system using time machine from an external hard drive. I reinstalled OSX, then reinstalled Snow Leopard, then reinstalled the system from a previous save from Time Machine.
how exactly did you reinstall the system from TM? please give details. the correct way to do it is to boot from the snow leopard DVD and use the "restore system from backup" utility in the Utilities menu. there is no need to reinstall anything prior to using that utility. the restore utility wipes your hard drive and restores it to the state it was in at the backup time.
It said the installation was successful, but when the computer restarted a message comes up saying "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again". Ive done this about 5 times now but it always just says the same message without starting properly. WHAT DO I DO???? I really need to use my computer tomorrow so any help is hugely appreciated!!! TIA
PS. i have done a hardware test in "loop mode" and it says everything is fine

Interesting SCOM Reports and "Microsoft System Center Virtual Machine Manager 2012 R2 Reports" MP Issue , Some reports appear others don't

Our test environment is quite simple one Operations Server 2012 R2; with the database and SSRS instance on another server; Service Manager 2012 is on it’s own virtual machine; and the Service Manager Data Warehouse on it’s own. I’ve been trying to demo chargeback
with scvmm and I’m having issues with the chargeback reporting.
I’ve followed this process to install chargeback reports:http://technet.microsoft.com/en-us/library/jj614406.aspx which
completed successfully. All of the cubes seem to process correctly in Service Manager and I can create a chargeback analysis excel sheet with no issues in service manager. I still do not get any chargeback reports in the Operations console though. I get some
reports under the “Microsoft System Center Virtual Machine Manager 2012 R2 Reports” heading like Capacity, Host Group Forecasting, Host Utilization, etc but no chargeback report.
I can see the chargeback report in the SSRS website but cannot get it to appear in the Operations console. If anyone has any tips or troubleshooting they can point me at I would appreciate it.

Hi,
Hope the below link could be helpful:
Enabling Chargeback in a Service Provider Cloud by Kristian Nese
http://blogs.technet.com/b/privatecloud/archive/2013/04/12/enabling-chargeback-in-a-service-provider-cloud-by-kristian-nese.aspx
Regards,
Yan Li
Regards, Yan Li

Problems Installing RAID System

This is my first attempt at building a RAID system and I'm having a bit of trouble. I'd like to install Arch on one hard drive and then create a RAID-5 array using several 1TB drives I have lying around. The RAID array will only be used for storage--the operating system will be on its own drive. I'm planning on using the RAID controller on my motherboard (Abit IP35 Pro), which I believe provides hardware RAID support (someone please correct me if this is wrong).
From what I've read, it sounds like the best way to get this set up is by installing the operating system first and later adding in the disks and creating the RAID array. The steps I've taken so far are as follows:
1) Remove all disks except for the one I'll be using for the operating system.
2) Go into BIOS and set SATA mode to "RAID"
3) Install Arch
Arch gets installed just fine, but when I try to boot into it, I get a kernel panic with the following error message:
/init: export: line 63: : bad variable name
Kernel panic - not syncing: Attempted to kill init!
Pid: 1, comm: init Not tainted 2.6.36-ARCH #1
Call Trace:
If I go into the BIOS and change the SATA mode back to "AHCI," then Arch boots up just fine.
I've found a lot of documentation on installing software raid/fake raid systems, but I haven't found much on configuring Arch for hardware raid. I've also seen the documentation on dmraid which looks like it might work for me, but I believe that is a software solution and I'd like to take advantage of my hardware controller if possible.
Can anyone else share some insight? Thanks all and Merry Christmas!

i think its fake raid not hardware raid.

System Center Virtual Machine Manager 2012 R2 trial ISO - Technet Evaluation Center

Hello,
I have checked the Technet Evaluation Center for the System Center Virtual Machine Manager 2012 R2 - 180 days trial ISO but nowhere to be found.
I see that Microsoft has put a eval VHD on the following URL: http://www.microsoft.com/en-us/download/details.aspx?id=40843.
Microsoft: Can you please upload the: System Center Virtual Machine Manager 2012 R2 iso 180 day trial to the Technet Evaluation Center since you have cancelled the technet subscribtion :)
Thank you in advance
//Robert Diego

Hi Sir,
System Center products were gathered in System Center products , you can download 12R2 VMM :
http://www.microsoft.com/en-us/evalcenter/evaluate-system-center-2012-r2
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Kernel Panic, Restored System Using Time Machine but Problems Still Persis

SOS! Please, please, please help. I'm at a loss here. I have an 300 GB iMac with a 32 GB partition for Windows. I backup to an Iomega UltraMax 500 GB external hard drive. Let me know if more info is needed. I went through the checklists to resolve a kernel panic, and nothing has been working. Here's the background:
I recently encountered a kernel panic (I saw the screen discussed in the "What is a kernel panic?" article). It started when Firefox 3.2 beta was running. It froze and eventually the system froze. I repaired disk permissions, and I was able to boot up, but it took awhile to boot up. Some things weren't right once it was booted; I lost some keyboard functionality, system settings (screen saver, display settings, etc), etc. I attempted to repair the disk (using disk utility while booted from leopard install disc), but it failed (generated an error, said it couldn't repair disk). So I did the next thing and restored the system from Time Machine. Things seemed to be alright.
And about a couple days later, Time Machine starting encountering errors and failed to backup (it failed while attempting to backup 300 MB). The system also started to get slower, and it eventually froze. So I restored again from Time Machine. Seemed to be alright, but again it eventually slowed and started freezing.
I can't retrieve the panic log. I think it was erased with one of my system restores. I went into Time Machine to look for it, and it's nowhere to be found.
So, I tried to repair my disk permissions. That succeeded. But the disk repair failed again. I restored again from Time Machine. Same thing: things seem okay, but Time Machine isn't able to back-up (it's pretty much non-responsive, even after I told it to stop, it just says "stopping"), things are a bit slow and some applications are unstable (Firefox crashed for no apparent reason). I just found this under /Library/Logs/Crash Reporter:
Process: ReportCrash [467]
Path: /System/Library/CoreServices/ReportCrash
Identifier: ReportCrash
Version: ??? (???)
Code Type: X86 (Native)
Parent Process: launchd [1]
Date/Time: 2009-03-12 11:05:40.590 -0400
OS Version: Mac OS X 10.5.6 (9G55)
Report Version: 6
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: 0x000000000000000a, 0x0000000000366000
Crashed Thread: 1
Thread 0:
0 libSystem.B.dylib 0x946eb226 semaphoretimedwait_signaltrap + 10
1 libSystem.B.dylib 0x9471d1ef pthread_condwait + 1244
2 libSystem.B.dylib 0x9471ea73 pthreadcond_timedwait_relativenp + 47
3 com.apple.Foundation 0x9417275c -[NSCondition waitUntilDate:] + 236
4 com.apple.Foundation 0x94172570 -[NSConditionLock lockWhenCondition:beforeDate:] + 144
5 com.apple.Foundation 0x941724d5 -[NSConditionLock lockWhenCondition:] + 69
6 ReportCrash 0x0000a3eb 0x1000 + 37867
7 ReportCrash 0x00002466 0x1000 + 5222
Thread 1 Crashed:
0 com.apple.Symbolication 0x0007d903 -[VMUMemoryView_Native uint32] + 245
1 com.apple.Symbolication 0x000765c8 +[VMUHeader headerWithUniverse:memory:name:path:timestamp:] + 147
2 com.apple.Symbolication 0x000763d4 +[VMUHeader extractMachOHeadersFromHeader:matchingArchitecture:considerArchives:] + 285
3 com.apple.Symbolication 0x0008acbb extractHeaderWithSignatureFromDisk + 397
4 com.apple.Symbolication 0x00085314 -[VMUSymbolicator faultLazySymbolOwnerAtIndex:] + 189
5 com.apple.Symbolication 0x00087b5a -[VMUSymbolicator forceFullSymbolExtraction] + 183
6 com.apple.Symbolication 0x0008749f -[VMUSymbolicator symbolOwners] + 39
7 ReportCrash 0x000041e3 0x1000 + 12771
8 ReportCrash 0x00002eef 0x1000 + 7919
9 ReportCrash 0x000094a2 0x1000 + 33954
10 ReportCrash 0x0000b5d4 0x1000 + 42452
11 ReportCrash 0x0000b121 0x1000 + 41249
12 libSystem.B.dylib 0x9474803b machmsg_serveronce + 416
13 ReportCrash 0x0000a828 0x1000 + 38952
14 libSystem.B.dylib 0x9471c095 pthreadstart + 321
15 libSystem.B.dylib 0x9471bf52 thread_start + 34
Thread 2:
0 libSystem.B.dylib 0x946eb1c6 machmsgtrap + 10
1 libSystem.B.dylib 0x946f29bc mach_msg + 72
2 libSystem.B.dylib 0x94747fd9 machmsg_serveronce + 318
3 ReportCrash 0x0000a828 0x1000 + 38952
4 libSystem.B.dylib 0x9471c095 pthreadstart + 321
5 libSystem.B.dylib 0x9471bf52 thread_start + 34
Thread 1 crashed with X86 Thread State (32-bit):
eax: 0x00366000 ebx: 0x0007d832 ecx: 0x00000000 edx: 0x00000004
edi: 0x00000000 esi: 0x001b28d0 ebp: 0xb00807d8 esp: 0xb0080780
ss: 0x0000001f efl: 0x00010297 eip: 0x0007d903 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
cr2: 0x00366000
Binary Images:
0x1000 - 0xdfff ReportCrash ??? (???) <e97e4b832cee3d343e3ff627defb41d3> /System/Library/CoreServices/ReportCrash
0x6f000 - 0xb3ffb com.apple.Symbolication 1.0 (35) <70dc2274da04c58fe0cd09dee25b5507> /System/Library/PrivateFrameworks/Symbolication.framework/Versions/A/Symbolicat ion
0x8fe00000 - 0x8fe2db43 dyld 97.1 (???) <100d362e03410f181a34e04e94189ae5> /usr/lib/dyld
0x901cd000 - 0x9039bff3 com.apple.security 5.0.4 (34102) <55dda7486df4e8e1d61505be16f83a1c> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x904ee000 - 0x907c8ff3 com.apple.CoreServices.CarbonCore 786.11 (786.11) <f06fe5d92d56ac5aa52d1ba182745924> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x909a5000 - 0x90a2cff7 libsqlite3.0.dylib ??? (???) <6978bbcca4277d6ae9f042beff643f7d> /usr/lib/libsqlite3.0.dylib
0x910d0000 - 0x9114fff5 com.apple.SearchKit 1.2.1 (1.2.1) <3140a605db2abf56b237fa156a08b28b> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x914d0000 - 0x914d2fff com.apple.CrashReporterSupport 10.5.5 (159) <4ca9b6643fcbafd76424a46d162363eb> /System/Library/PrivateFrameworks/CrashReporterSupport.framework/Versions/A/Cra shReporterSupport
0x91656000 - 0x91789fff com.apple.CoreFoundation 6.5.5 (476.17) <4a70c8dbb582118e31412c53dc1f407f> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x9178a000 - 0x917e7ffb libstdc++.6.dylib ??? (???) <04b812dcec670daa8b7d2852ab14be60> /usr/lib/libstdc++.6.dylib
0x923d2000 - 0x923e8fff com.apple.DictionaryServices 1.0.0 (1.0.0) <ad0aa0252e3323d182e17f50defe56fc> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
0x92a28000 - 0x92ae2fe3 com.apple.CoreServices.OSServices 226.5 (226.5) <2a135d4fb16f4954290f7b72b4111aa3> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x93184000 - 0x93264fff libobjc.A.dylib ??? (???) <7b92613fdf804fd9a0a3733a0674c30b> /usr/lib/libobjc.A.dylib
0x93352000 - 0x9348aff7 libicucore.A.dylib ??? (???) <18098dcf431603fe47ee027a60006c85> /usr/lib/libicucore.A.dylib
0x934d1000 - 0x934fcfe7 libauto.dylib ??? (???) <42d8422dc23a18071869fdf7b5d8fab5> /usr/lib/libauto.dylib
0x9389b000 - 0x93938fe4 com.apple.CFNetwork 422.15.2 (422.15.2) <80851410a5592b7c3b149b2ff849bcc1> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x939b4000 - 0x939e3fe3 com.apple.AE 402.3 (402.3) <4cb9ef65cf116d6dd424f0ce98c2d015> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
0x94122000 - 0x9439dfe7 com.apple.Foundation 6.5.7 (677.22) <8fe77b5d15ecdae1240b4cb604fc6d0b> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x943d6000 - 0x944b7ff7 libxml2.2.dylib ??? (???) <d69560099d9eb32ba7f8a17baa65a28d> /usr/lib/libxml2.2.dylib
0x946ea000 - 0x94851ff3 libSystem.B.dylib ??? (???) <d68880dfb1f8becdbdac6928db1510fb> /usr/lib/libSystem.B.dylib
0x94852000 - 0x94859ffe libbsm.dylib ??? (???) <d25c63378a5029648ffd4b4669be31bf> /usr/lib/libbsm.dylib
0x94ab1000 - 0x94b3dff7 com.apple.LaunchServices 290.3 (290.3) <6f9629f4ed1ba3bb313548e6838b2888> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
0x94c36000 - 0x94c7ffef com.apple.Metadata 10.5.2 (398.25) <e0572f20350523116f23000676122a8d> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x94cef000 - 0x94cf3fff libmathCommon.A.dylib ??? (???) /usr/lib/system/libmathCommon.A.dylib
0x962da000 - 0x962e2fff com.apple.DiskArbitration 2.2.1 (2.2.1) <75b0c8d8940a8a27816961dddcac8e0f> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x96731000 - 0x967bcfff com.apple.framework.IOKit 1.5.1 (???) <f9f5f0d070e197a832d86751e1d44545> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x967c5000 - 0x967e9fff libxslt.1.dylib ??? (???) <0a9778d6368ae668826f446878deb99b> /usr/lib/libxslt.1.dylib
0x967ea000 - 0x967f1fe9 libgcc_s.1.dylib ??? (???) <f53c808e87d1184c0f9df63aef53ce0b> /usr/lib/libgcc_s.1.dylib
0x96802000 - 0x96810ffd libz.1.dylib ??? (???) <5ddd8539ae2ebfd8e7cc1c57525385c7> /usr/lib/libz.1.dylib
0x96c22000 - 0x96c59fff com.apple.SystemConfiguration 1.9.2 (1.9.2) <8b26ebf26a009a098484f1ed01ec499c> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x96ea7000 - 0x96ea7ffa com.apple.CoreServices 32 (32) <2fcc8f3bd5bbfc000b476cad8e6a3dd2> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0xfffe8000 - 0xfffebfff libobjc.A.dylib ??? (???) /usr/lib/libobjc.A.dylib
0xffff0000 - 0xffff1780 libSystem.B.dylib ??? (???) /usr/lib/libSystem.B.dylib
Windows XP ran fine from my other partition at this point. I'm wondering if my Windows partition has something to do with it (I chose FAT32 instead of NTFS file system)?
Please help. Will erasing the drive, reinstalling from the leopard disc (10.5.4), and restoring select applications/folders/files help, instead of from a system restore from Time Machine?
Your help is immensely appreciated!

Thanks for responding.
So under the partition tab, I should reformat to one partition, reinstall Leopard, and see what happens from there? Selectively restore applications, music, pictures to my system once it's reinstalled and properly updated? Anything else I may need to do or restore?
Why not reformat under the erase tab, zero out the disk, and reinstall? Any difference?
Just a little worried and unsure is all. If it's a hardware thing, I can accept that and take it in to be serviced. But, if it is a software issue, I don't want to do any irreparable harm during the erase-and-reinstall process. Just want to make sure I get it right.
Message was edited by: Immolate

How to enable microsoft system center virtual machine manager Management Pack IP Pool monitoring

How to I enable how to enable IP Pool monitoring in the Microsoft System Center Virtual Machine Manager Management? The IP Pools show up in the IP Address Pool Health dashboard, but the state is "Not Monitored". How to I get these to light up
as monitored?

Hi,
Have you integrated VMM and SCOM?
Hope the links below could be helpful:
Operations Manager Integration and PRO Improvements in SCVMM 2012
http://blogs.technet.com/b/scvmm/archive/2011/04/14/operations-manager-integration-and-pro-improvements-in-scvmm-2012.aspx
Integrating VMM 2012 and OpsMgr 2012
http://blogs.technet.com/b/kevinholman/archive/2012/08/21/integrating-vmm-2012-and-opsmgr-2012.aspx
And please also search for "IP address Pool" under monitors or rules, hope you may find something related there.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Making 2 Raid Systems on 1 Machine

Similar Messages

Maybe you are looking for