Making a DVD from .MOV file w/o using iDVD
Hello
The film was made in FCE, saved in Quick Time (.mov) and want to burn it to a DVD to play on a DVD player. I don't want to use iDVD because I don't want the Apple logo in the corner (sorry).
Any suggestions?
Thanks!
A L
iDVD preferences
Similar Messages
-
The OneStep DVD from Movie file works fine for my 4:3 movies -- but I can't seem to figure out how to get my 16:9 movies to come out letterboxed when viewed on a standard screen. Is there some setting I can change to give me the results I need? I don't want or need anything more than a simple video that loops -- no theme, menu, etc -- so I haven't wanted to create a 'project'.
Any help is greatly appreciated!I found the solution to my problem of burning a letterboxed SD 16:9 movie with iDVD on another forum and it worked like a charm! Details below:
Name: Christopher S. Johnson
Date: Nov 18, 2006 at 8:26:34 pm
Subject: Re: 16:9 and idvd 6
I'm not sure why but iDVD doesnt see the anamorphic flag on SD anamorphic QT movies. It WILL behave properly for HD QT files though.
This is the "Christopher S. Johnsnon" work around:
Open your anamorphic SD QT movie in QT player Pro.
Press Command-J
Highlight the Video settings in the list
Select Visual Settings in the tabs
UN-check Preserve Aspect Ratio
Change the width from 720 to 854
Hit Return and
Save the movie
Now bring it back into iDVD and you are good to go!!!
G5 Mac OS X (10.4.8)
G5 Mac OS X (10.4.8) -
IDVD showed 5 hours to put together an mpg 2 DVD from .mov files & .jpgs
I am trying to put together a quick movie without all the trimmings onto a regular DVD to play on any DVD player & standard def TV. My camera shoots .mov & jpg files. I would like to be able to make DVDs quickly to give to family members who are eager to see the results. I usually save what ever I do as an ISO, then from this I can burn any amount of DVDs.
I tried using one step DVD & magic DVD,to do this, but the progress window showed it would be 5 hours to do. Why so long? The actual footage is about only 20 minutes long. I was advised to use these programs for this purpose. Can I just put the movies & photos without fancy menus etc? just for viewing?
Message was edited by: Sossity
Message was edited by: Sossity
Message was edited by: SossityHi
A 3 Years old MB should take about same time as movie + menu to be calculated.
Rediculosly long times - most often depends on two things
• free space on boot (Mac OS) hard disk less than 5GB - my minimum is 25GB
• use of strange material as .avi, .wmv, .m4p etc
(due to that iDVD has to back convert this to what iDVD use natively)
I convert all
video to - streamingDV .dv (QuickTime .mov)
audio to - .aiff 16-bit 48kHz (NO .mp3 - convert this)
pictures - .jpg (everything converted to this)
My about 10 Years old G3 took about 36 hour per 1 hour movie to be calculated.
(before iDVD days - Formac Devideon)
Yours BengtW -
Create a playable dvd from movie file
can anyone suggest any good free software for turning video files (.avi .mpg etc) into a dvd playable on a dvd player?
No need to apologize, Its just that your question is on the tail end of another question and therefor many people won't see it.
Highlight your text in your question and copy it.
Then goto> http://discussions.apple.com/forum.jspa?forumID=1339
On the left hand side of the page near the top with be a Post new topic icon.
Click on this and title your topic something like Edit .mpg file ?
Then past your text into the body of the post area.
Good Luck -
Making a DVD from iPhone Video
Lifelong Windows user here seeking some Mac expertise:)
I am in the process of making a DVD from Iphone home videos that can be played on any DVD player.
I see that Mac's video format is .mov which from what I can tell is not the same format needed to make DVD's that can be played on all DVD players. I already have the files saved on my MacBook Pro as mov. files can anyone tell me how to get them converted in order to have them play on a DVD player? Can iMovie do the conversion for you or do I need another program to convert the files and then process them into a movie in the iMovie program or even Adobe Premiere Elements 12 which I also have installed on this MacBook Pro.
Any help would be greatly appreciated.That is great information to have. Thank You for your quick response. Following your response I did some more research on video converters and found that Handbrake which I already have installed on the MacBook converts video files but only in the output formats of MP4 and MKV which does not help my cause; however, while doing that research I came across a program known as iMedia Converter Deluxe for Mac from Skysoft which from what I can tell supports output .avi video formats. Do you have any experience / advice on iMedia or any other recommended video converter program that works well with Mac and is preferably "free"?
-
While using "One Step DVD from Movie" using DVD-R Verbatim ("Life Series" 4.7 16 X 120 min) on my IMac 10.6.8 I get a wide angle aspect ratio on the DVD not the standard 3X4 aspect ratio. The Quicktime Movie is is standard 3X4 aspect ratio and the video video footage is standard 3X4 aspect ratio? Advice will be greatly appreciated.
Try this basic troubleshooting fix :
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iDVD folder.
Click to view full size
3 - reboot.
4 - launch IDVD and try again.
Personally I would not the the one step method but create the iDVD project from scratch so you can make sure the widescreen option is not selected in the preferences and you can follow this workflow:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT -
IDvd - Onestep dvd from movie, not working?
I am trying to make a onestep dvd from movie - from an avi file... but every time I make one (I followed all the directions perfectly). It looks like it is burning and takes about 4 hrs. but nothing happens. it just says I have inserted a blank dvd. Why does this keep happening?
Hi
from an avi file
.avi is not the food for iDVD - it usually can not handle it at all.
.avi - is no codec but a container - so one must use another program to figure out what codec that's in there.
Then convert it to sometrhing iDVD can use.
My UN-Structured/sorted notes up till Yet ! (May be MANY Faulth ! be careful)
AVCHD
• need of Intel Mac and iMovie’08 or 09 or 11
• can be converted to AIC via Voltaic
Containers.
.mov.
.avi.
You can use MPEG-Streamclip to convert some of the AVI files so that QuickTime can play them
and then to streamingDV for iMovie.
True file formats (?).
.asf (from QuickTimeKirk)
Your product is based on Windows OS and the .asf files are designed for Windows Media Player.
Microsoft discontinued Mac support for Windows Media Player in 2003.
iv50 - old codec on window platform.
• Open on a PC-Window with Microsoft Movie Maker.
• Put into TimeLine
• Save on ”this Computer” as .wmv
move over to Mac and open with QuickTime Pro and save as StreamingDV
(if Flip4Mac is payed then no Waterstamp and time limit)
or
Open in FinalCut Pro as is = No Waterstamp or time limit.
Flip4Mac -- //flip4mac.com
is third party software that "plays" most WMP formats via QuickTime Player. They also sell upgrades that allow conversion from WMP to QuickTime formats.
These upgrades are supported in iMovie version 6 but not for version 7 or 8 (iLife '08 and '09).
So. What to do?
Purchase one of the Flip4Mac upgrades.
Copy the files from the SD card to your Mac and convert to QuickTime formats (DV Stream would work best).
Import the new .dv file into iMovie (any version).
.dv
streaming DV imports directly it is the same as from miniDV (tape) Camera
.wmv
iMovie is by concept meant to work with miniDV camcorders . . any other 'imports' need a conversion or are not supported... a quick solution would be purchasing a plug-in from www.flip4mac.com, 49$, which allows the conversion of .wmv (a PC format) into something useful for iM (dv-stream) ...
or, ask the emailer to send it in some other codec .. mpg4 for example .. which will be converted by iM 'out-of-the-box' ... and, to work with iM, the video should fulfill a few standards .. 720x480 pixel resolution, 30 frames per second ... otherwise, you will experience a dramatic loss of quality ..
.mp4
container not to be mistaken for .mpeg4 which is a codec - and it’s most often could contain a H.264 encoded material (PS3 and AppleTV)
.m4v
found in iMovie project folders - imported into iDVD without any problems
.mov
found in iMovie project folders - imported into iDVD without any problems
.ram real-movie by Real-player download
Both Real Networks (.RM, .RA, and .RAM video files) and Microsoft (.ASF, .WMA, and .WMV video files) makes it VERY difficult to import footage encoded with these formats. Especially on a Mac.
.mpg
.mpeg
.vob
.vro
.m2v
.m2a
.m2s
.mts
.m2ts
.swf files are Flash files. You need Perian
.flv Awkward timing in your choice of software as QuickTime 7.4 has dropped support (we hope it is temporary) for Flash Video formats (.swf or .flv file extensions).
MPEG-1. VideoCD
MPEG-2. DVD
MPEG-4. cell-phones to satellite TV - scalable
//danslagle.dvmix.com/mac/iMovie/qt_plugins/3002.shtml
Mpeg Streamclip. Supported formats.
• MPEG, VOB, PS, M2P, MOD, VRO, DAT, MOV, DV, AVI, MP4, TS, M2T, MMV, REC, VID, AUD, AVR, VDR, PVR, TP0, M2V, M1V, MPV, AIFF, M1A, MP2, MPA, AC3...
MPEG Streamclip converts from mpeg-1 to whatever you like (within reason).
MPEG-2 Playback File Types.
.mpg, .mpeg, .vob(2), .vro, .m2v, .m2a, .m2s
QuickTime MPEG-2 Playback Component
Recording types.
DV standard miniDV (tape)
DV Widescreen 16 X 9 on standard miniDV (tape)
HDV 1080i Full HD quality
HDV 720p
MPEG-4
iSight
From Mac to PC - convert to .avi or .wmv
• Transport problem and 2?Gb limit on DOS/UNIX formatted hard disks - You need a
hard disk formatted on a PC in NTFS format
FAT 16 has a 2 or 4Gb file size limit
FAT 32 should be able to handle larger ones
• Rather copy back to miniDV tape (Camera) and use this
QuickTimeKirk. You don't format the drive using a Mac.
Use the PC to format using NTFS and avoid FAT 16 or FAT 32.
//en.wikipedia.org/wiki/Windows_Movie_Maker
Yep. They want DV-AVI as the format. Same thing but in an AVI container.
Export from iMovie to AVI (Expert Settings) and click the "Options" button to set DV as the codec.
Yours Bengt W -
How do I produce the highest quality DVD from MOV exported from iMovie
What is the best method in iDVD11 for burning to DVD, an imported HD 720p or HD 1080p MOV file exported from iMovie11?
I have successfully exported a 5.5GB (66min) HD 720p MOV file from iMovie. I then used iDVD to import this MOV file and burn it to DVD. When I played the DVD the quality was nowhere near that of the imported HD 720p MOV file as played on QuickTime. The DVD also shows captions at the edge of the 16:9 TV screen instead of further inside as per the QuickTime screening of the HD 720p MOV file.
How can I improve quality and maintain borders in iDVD for the DVD output?Hi
How can I improve quality and maintain borders in iDVD for the DVD output?
Quality.
• Use iMovie up to HD6 or FinalCut - as iMovie'08 or 09 or 11 - just delivers every second line to iDVD = less resolution
• There are no HD-DVD in real life - DVD is as standard SD-Video
• If You must use iMovie'11 then do not use "Share to iDVD" BUT "Share to Media Browser" and as Large (Not HD or other resolution - as result will suffers)
Border
• May be turning on TV-Safe area in iDVD can help a bit. ?
• If this is IMPORTANT - Then You have to re-do Your movie in FinalCut and here turn on TV-Safe area and shrink the movie area to within this. Now it will show all on an old CRT-TV - but with a black frame due to that no two CRT-TVs show exactly the same area and then TV-Safe must be less than this.
My - Un-specific notes on DVD-Quality. If You are interested.
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (vers 7.0.1, 7,0.4 & 7.1.1)
iDVD 6 has the two last ones
• Professional Quality (movies + menus up to 120 min.) - BEST
• Best Performances (movies + menus less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies + menus up to 120 min.) - slightly lower quality than above
About double on DL DVDs.
2.Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no QT-conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-layer.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be playbacked IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are playbacked by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround eg EnergySaver
• Don’t let HD spinn down or be turned off (in EnergySave)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screensaver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W -
Making a DVD from my FCE 4 project?
Hi,
I occasionally need to make a DVD of my finished FCE 4 projects, and have been doing it by sharing the finished .mov file between iMovie and iDVD. This process seems cumbersome (at least, the way I do it) and it appears that the .mov file is copied during the "share" process. This seems redundant and, of course, eats up drive space. I'm wondering if there's a much simpler way to somehow create a DVD more directly from FCE 4. (Can I import the finished .mov file into iDVD without going through iMovie and "sharing" (i.e. copying) the .mov file.
In other words, I'd like to know the easiest way to create a DVD of my FCE 4 project. Any suggestions? Thanks very much.
VicThanks, Tom. I'm guessing it needs to be exported from FCE 4 as a stand-alone .mov file? ...and then I won't need to go through iMovie to "share" the file?
-
I am making a DVD from final cut pro, it is about 1 hour 50 minutes. I am using idvd are there any suggestions on how or/if to compress this to make it fit on idvd. I thought I would try posting here first instead of the idvd board.
thanks!iDVD has a limited number of (commonly used) file formats it can deal with, and uses its own DVD video encoder to format and build the DVD. The iDVD help system describes the kinds of files it can accept.
You would use Compressor to encode the separate video and Dolby surround audio files for DVD Studio Pro projects, and iDVD does not accept those file types. If you need more control over your encoding, you should use FCP and Compressor with DVDSP.
The iDVD forums will have more on that topic.
That being said, I love using iDVD because of it's ease and simplicity. I use it to make quick DVDs of my Final Cut Pro projects. Just feed iDVD the right files and it works beautifully.
Cheers -
Is there a way to create DVDs from movies made in iMovie on the iPad?
Is there a way to create DVDs from movies made in iMovie on the iPad? I have a PC. Thanks
King_Penguin wrote:
There are third-party browser apps that have settings within them to identify themselves as full browsers e.g. Atomic Web, and I believe the iCab Mobile browser also does (I don't have it so i can't check)
iCab indeed does allow for that -
Hello. I just upgraded my MacBook Pro and I am now running OS 10.9.1 I am using iDVD 7.1.2. Whenever I try to make a OneStep DVD from movie and I select the movie from my desktop, iDVD crashes. It starts the encoding and a few seconds into it, a window pops up telling me that I inseerted a blank DVD and asks how I want to handle that. When I make any selection, iDVD closes. Please note that when I inserted the DVD earlier, it asked me how to handle the DVD and no matter what I choose, this window opens again for a second time after the encode starts. Any ideas? Thank you for any help.
How did you create the movie and what is its format? How much free space do you have on your hard drive?
Does iDVD crash if you try to create a standard project, i.e. open, select a theme and go from there?
OT -
Disk Utility - Burning DVD from desktop file created from camcorder
I am unable to burn a DVD from a file on my desktop. When trying to use the upper tray, the disk drive won't remain closed and I am unable to proceed.
When using the lower tray, it begins the burn process, then returns this message:
Unable to burn file. The device failed to respond properly, unable to recover or retry.
The upper tray is a HL-DT-ST RW/DVD GCC-4480B
The lower tray is a Sony DVD RW DRU-530A.Thanks for answering ALL the questions, too many times I ask as many questions as possible to get as much info as possible and I get a one line response.
4GB file with Disk Utility should be fine.
4x speed should be fine too, but you may want to try 2x, just in case the ATA-33 bus is struggling. The ATA-33 bus is the original bus in the MDD for the optical drives, the hard disks were on an ATA-66 and ATA-100 bus. Unfortunately ATA-33 is very limited in the amount of data it can reliably send in a given time, and 4x DVD burning is the absolute limit.
Sony DVD-R should be fine, many here are wary of Memorex media, I use it for temporary copies of product / games discs, but never for backups.
How is the external DVD burner attached ? FireWire ?
It really should be working, you've already confirmed that both the drives successfully burn CDs, so we know they're recognised and operating. And you've said the 4GB camcorder file is on your desktop, ie. on the internal hard disk, so we know it's not a speed issue with the source file, like if it was on a flash drive - or is it ? Or is it still on the camcorder ? If so get it copied to the internal hard disk.
Can you confirm the ATA-33 bus and Disc Utility support for the drive by using Apple System Profiler, if you select ATA, it should appear on the ATA-3 bus. You'll also have an ATA-4 and ATA-6 bus.
If you click on "ATA-3 bus" you should find an entry "Disc Burning" and it should say "Apple Supported" or similar. If it doesn't then I don't think you can burn with Disk Utility. Generally, above OSX 10.4.6 (or 10.4.5, can't remember exact) all these drives are supported, for burning and booting from. I suspect you're fine as you've said you burn CDs with it fine.
One thing some people do is to buy an ATA-133 PCI card, and run the internal hard disks off that and the ATA-100 on the motherboard. Then use the motherboard ATA-66 slot to drive the optical drives. Don't spend any money yet, we'd have to confirm that the burn speed is the issue. Like said, try burning at 2x or 1x.
Apologies now if my Apple System Profiler instructions are not 100% accurate, my OSX 10.5.5 Mac is unavailable just now so I've based my instructions on OSX 10.3.9 ASP. -
With Adobe Premier Elements 13 can I add my own audio tracks by pulling music from my files and by using my USB microphone?
larryh
Please remind us on what computer operating system your Premiere Elements 13 is running
Using your own music.....
Yes, with important but.....
Details
If your music is from iTunes, more than likely you will get some sort of error message from the program when you try to import the iTunes music into Premiere Elements (most versions including 13). In that case, please convert the iTunes music to the wav version in iTunes using the following iTunes instructions.
iTunes: How to convert a song to a different file format - Apple Support
If you are getting program error message using Premiere Elements 13 Add Media/Files and Folder with other than iTunes music, please give the source and properties of that music.
Using USB Microphone....Not recommended by Adobe....See Adobe ReMe
Details
As for Premiere Elements narration clips using the its Narration Tool
1. Adobe documentation indicates the USB microphone do not work in Premiere Elements and suggest the use of microphones that connect to the computer via computer jack.
But, there are some scattered cases where the user has found a USB microphone that has worked for him or her.
2. Be sure to check Edit Menu/Preferences/Audio Hardware ASIO settings to assure that Input and Output are enabled.
3. There have been reports (Premiere Elements several versions) where addition of narration using the Narration Tool results in loss of pre-existing
sound on numbered audio track clips and soundtrack.
ATR Premiere Elements Troubleshooting: PE12: Audio Losses After Narration Addition
4. In my particular Premiere Elements 13 on Windows 8.1 64 bit, I have found that I need to set the Mic Sensitivity all the way to the left to avoid
serious audio distortion.
I have tried to give you an overview to avoid surprises if you have not used the features that you pointed to in your thread question. Please let me know if you need further information.
Thank you.
ATR -
Loading from flat file to dso using process chains
hi,
i am using BI7.0
i am new to process chains
can anyone explain how to load data from flat file to dso using process chains(i have created all the objects created) preffered if explained with an exampleYou can find a lot info if you can searh SDN.
Metachain
Steps for Metachain :
1. Start ( In this variant set ur schedule times for this metachain )
2.Local Process Chain 1 ( Say its a master data process chain - Get into the start variant of this chain ( Sub chain - like any other chain ) and check the second radio button " Start using metachain or API " )
3.Local Process Chain 2 ( Say its a transaction data process chain do the same as in step 2 )
Steps for Process Chains in BI 7.0 for a Cube.
1. Start
2. Execute Infopackage
3. Delete Indexes for Cube
4.Execute DTP
5. Create Indexes for Cube
For DSO
1. Start
2. Execute Infopackage
3. Execute DTP
5. Activate DSO
For an IO
1. Start
2.Execute infopackage
3.Execute DTP
4.Attribute Change Run
Data to Cube thru a DSO
1. Start
2. Execute Infopackage ( loads till psa )
3.Execute DTP ( to load DSO frm PSA )
4.Activate DSO
5.Delete Indexes for Cube
6.Execute DTP ( to load Cube frm DSO )
7.Create Indexes for Cube
3.X
Master loading ( Attr, Text, Hierarchies )
Steps :
1.Start
2. Execute Infopackage ( say if you are loading 2 IO's just have them all parallel )
3.You might want to load in seq - Attributes - Texts - Hierarchies
4.And ( Connecting all Infopackages )
5.Attribute Change Run ( add all relevant IO's ).
Start
Infopackge1A(Attr)|Infopackge2A(Attr)
Infopackge1B(Txts)|Infopackge2B(Txts)
/_____________________|
Infopackge1C(Txts)______|
\_____________________|
___________________|
__\___________________|
___\__________________|
______ And Processer_ ( Connect Infopackge1C & Infopackge2B )
__________|__________
Attribute Change Run ( Add Infobject 1 & Infoobject 2 to this variant )
1. Start
2. Delete Indexes for Cube
3. Execute Infopackage
4.Create Indexes for Cube
For DSO
1. Start
2. Execute Infopackage
3. Activate DSO
For an IO
1.Start
2.Execute infopackage
3.Attribute Change Run
Data to Cube thru a DSO
1. Start
2. Execute Infopackage
3.Activate DSO
4.Delete Indexes for Cube
5.Execute Infopackage
6.Create Indexes for Cube
Some Links
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
Maybe you are looking for
-
Using Standard Container Variables in Email Alerts from BPM
Dear All While creating alert categories from ALRTCATDEF we have a Long Text Tab where we can use Container Variables like SXMS_MSG_GUID ,SXMS_RULE_NAME, SXMS_ERROR_CAT , SXMS_ERROR_CODE etc create the mail contents. We can also display the messag
-
My macbook crashed and I am trying to install my adobe programs again but I can't because he is used earlier by myself. How can I fix this without buying a whole new packet?
-
Lenovo Solution Center - Sugar Sync- uninstall
Since uninstalling Sugar Sync, Lenovo Solutions Centre reports under Device Manager that there is a problem with the driver StorLib Bus. When I check in Device Manager, Storage Controllers, Microsoft Storage Spaces Controller, the device is working c
-
Intermittent audio using AirPort wirelessly
I have the AirPort Express set to join my existing wirless network and have audio playing but it is interrupted frequently as if it were waiting for data transmission then resumes. Like a buffering problem but I can't find anywhere to increase a buff
-
Hello Experts !! I am wondering if PowerShell can be used to classify files ( confidential, highly confidential, Business use, and Public ) and encrypt it for confidential & highly confidential types. I found some material for Windows Server 2008 R