Making a DVD that works with surroung Sound

I am trying to make a DVD that works on surround a sound system (DTS system) There are 2 front speakers, 2 rear, and a sub woofer. I imported several film clips into iMovie (I believe what I did is called "down mixing") then created a Quicktime file that I imported into DVD Studio Pro. I created the disc, but the audio did not sound good. So I have been fooling around with Compressor to try to turn the audio into the correct format, and I still have not found the right combination to get the audio to sound correct. What can I do to get the disc sounding clear when I play it on the DTS system. I am assuming that there are certain steps I must make in both Compressor AND DVD Studio Pro (version 3) - I would be very appreciatvie to the person who can give me the magic formula to get everything sounding right. Thanks!

The answers posted don't fully address your question, since they are talking about AC-3, not DTS which is what you indicate you want.
First, you can use iMovie to edit the visuals, but you won't be able to use it (easily) to create the 5+1 tracks you'll need for surround encoding.
This is more a job for an actual multi-channel mixer, like BIAS Deck....
http://bias-inc.com/products/deck/
Basically, once you have each of your audio channels edited and mixed, you export each channel as an individual mono track. These are then imported into the audio encoder and assigned to the appropriate channels.
Apple does not provide a DTS encoder, so you'll need a third party encoder.
DTS sells their own...
http://tinyurl.com/6xvlb
And Surcode has one as well...
http://www.surcode.com/
DTS has a good document re: authoring surround discs...
http://tinyurl.com/kzsbx
If you can live with Dolby Digital, then you can use A.pack which is included with DSP.
-David

Similar Messages

MAking a DVD that works with surround Sound

I am trying to make a DVD that works on surround a sound system (DTS system) There are 2 front speakers, 2 rear, and a sub woofer. I imported several film clips into iMovie (I believe what I did is called "down mixing") then created a Quicktime file that I imported into DVD Studio Pro. I created the disc, but the audio did not sound good. So I have been fooling around with Compressor to try to turn the audio into the correct format, and I still have not found the right combination to get the audio to sound correct. What can I do to get the disc sounding clear when I play it on the DTS system. I am assuming that there are certain steps I must make in both Compressor AND DVD Studio Pro (version 3) - I would be very appreciatvie to the person who can give me the magic formula to get everything sounding right. Thanks!

You posted the same question in DVDSP forum; look for the answers:
http://discussions.apple.com/thread.jspa?threadID=583692&tstart=0
You can use A.Pack (look for it into your apps. folder) to generate the Dolby AC3 files.

Is there any Sound card 5.1 include stereo mix that working with MacBook Air such as Creative Labs SoundBlaster X-Fi Surround 5.1 Pro Entertainment System ? and if there any another sound card can you tell me what is it please ? Thank you.

Is there any Sound card 5.1 include stereo mix that working with MacBook Air such as Creative Labs SoundBlaster X-Fi Surround 5.1 Pro Entertainment System ? and if there any another sound card can you tell me what is it please ? Thank you.

Okay, I did my best searching and I couldn't find anything that matched all your descriptors. I did do a search on both decoder numbers. SB0256 returned very little results, but with SB0466, I was able to find this ebay listing:
http://cgi.ebay.com/ws/eBayISAPI.dll...6_fvi%3D&_rdc=
This card isn't a Champion like you suggested. And with my complete lack of knowledge, I don't know what I/O dri've bay means. But since it is PCI and the decoder matches the number you gave me, this card should be adequete, right?
Whether it works or not, my search indicated it might be very hard for me to find that card (or any PCI card for that matter). Everything I saw was out of stock. I know this is a forum for Creative, but are there any other manufacturers that will allow me to accomplish my goal, either with current cards, or discontinued cards? Thanks again
Oh, and I will vote on that thread. I probably won't wait for them to release the decoder since I need it now, but I still believe Creative should be giving the customer what they want

What is the best dvd burning program with a nice menu like idvd that works with Final cut pro

What is the best dvd burning program with a nice menu like idvd that works with Final cut pro, I am wanting to burn mainly wedding dvds but also sports and other things we used to use idvd but then upgraded our computers and now we dont have it. idvd was the only thing i could find that worked.
Thanks

There is no real substitute for iDVD.
Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)?

How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)? The advertising refers to Print Studio Pro 2 but all I find available to download is version 1.35.

Thanks - I did notice that the 2 was a superscript on one site but on another (I think the one for the Pro-10 printer) it was definitely a 2 in line with the rest of the text and separated by a space (at least on my browser). At any rate, I suspected something of the kind and will simply use Photoshop Elements 11 when I want a pattern print until the change is made.
If you have an inside line to Canon you might also suggest some changes to their Image Garden program, specifically its handling of DVD label projects. It has several themes and within each theme several layouts. As far as they go these are fine but they do not give nearly enough flexibility. The boxes for insertion of images are useful as is the simple procedure for rescaling the image so it is cropped in varying ways while staying within the fixed box. However, it should be possible (a) to relocate the boxes on the page and (b) to resize and reshape the boxes - probably by a control which would become available by right-clicking on the box. For example, there are times when the user might want to include a full 16 x 9 frame shot as one of the images, and in general the aspect ratios of the provided boxes do not permit this.
I have over the years preferred to use Word for this purpose after setting up masks to expose just the printable area of the DVD or Blu-ray disc, setting up the margins so that the center of the disc is in the horizontal center of the page, and finally introducing text and pictures and adjusting the font size of blank lines above the disc to line everything up properly in the vertical direction. A typical layout might involve one large picture, located so the center hole and the curved outer edge do not block anything important, or two pictures side by side, or four pictures centered vertically (to minimize the effect of the outer edge of the disc) but possibly of different widths (so as to make both close-ups and wide scenes optimal on the same disc label). The text then goes above and below the pictures. All of this works perfectly so I probably wouldn't use Image Garden very often for this purpose, but the inability to resize and relocate the boxes must be very limiting for others as well.
Some of the layouts have image locations severely reduced by the edge of the disc.
As I said ... if you have an inside line to Canon .. but if not, please excuse the length of this post!

Acrobat 9 does not recognize the smart card reader that work with other app. Can someone help me?

Hi to All,
Acrobat 9 (included in CS4 design premium) does not recognize the smart card reader. I have a smart card reader ACR38 smart card that works with all applications except Acrobat 9 pro. I tried to uninstall and reinstall it again, but when I try to insert the digital signature message is always the same, that does not find the Acrobat reader. Can someone help me?

Hi MartinR
Thank you for your reply, i have tried what you suggest, and it did not work, the i DVD opening title changed but not the embedded movie.
Perhaps it is a setting in Final Cut Express?
After capturing my footage, i open a new project then i convert all clips to anamorphic, to give me the letterbox effect, i have tried now with and without anamorphic.
In my canvas screen, the footage does not fill the square, even if i have not selected anamorphic, and fall well within the TV safe areas, but the only way to ill the canvas up is to crop it bigger, but still when i export it does not give me the full screen view.
Any ideas?

Equalizer app that works with pandora?

Is there an equalizer app that works with pandora? I just got a new Rav4 w/ a sucky sound system & I'm hoping to juice it up a bit. Thanks,

I've been using Hermes (donationware) and have been quite happy with it:
http://alexcrichton.com/hermes/
Regards.

Capture devices that work with Final Cut Express

Would any one out there be able to recomend a reasonably priced video capture device that works with FCE other than a video camera? I want to input video and audio from VHS and DVD. I also want to input Audio from cassette and CD.
imac G5 Mac OS X (10.4.4)

I am in a similar situation. All I can say is that the ADS Pyro AV Link works well with iMovie but not with Final Cut Express or Pro so I returned it.
I am waiting for a DataVideo DAC 100, Their web site gives specific instructions as how to use the DAC with FCP so I am hopefull that it will work with FCE.
http://www.datavideo.us/products/dac100_mainpage.htm
The Canopus ADVC 110 has also been recommended on this forum.
http://www.canopus.com/products/ADVC110/index.php

Car charger that works with the bumper case?

Does anyone know which, if any, brands of car chargers and models that work with the new bumper case? I went to best buy yesterday and they all looked too thick to even buy it and give it a try.

I'm pretty sure the lack of functionality with car chargers and the bumper case is simply because the cutouts for the USB connector on the bumper is too small..that's the only reason. Otherwise it will work; it's simply a physical problem with the connector not seating properly; that's it.
I'm saying this based on my own situation. I have a Griffin car charger /FM receiver that worked with my iPhone 3G and it worked with my iPhone 4 until I put the bumper case on.
The situation is the same situation as to why the Apple supplied USB cable that shipped with the 3G does not work with the iPhone 4 w/bumper. Apple redesigned the size of the USB connector and sized the cutout on the bumper for their new smaller size making the bumper not backwards compatible with existing devices with the older size USB connectors. The size differential is not that big but it's big enough to cause problems.

I have Maverick is there anything like Canopus 200 that works with Maverick. I have 80 VHS's from the 1980's I need to cook?

I have Maverick is there anything like Canopus 200 that works with Maverick. I have 80 VHS's from the 1980's I need to cook?

my son is using the Hauppage PVR2 + HDPVRCapture recording (endlessly…) his Playstation3 sessions. Same combo can be used to connect any DVD or VHSplayer to a Mac and transfering/digitize private recordings.The Hauppage offers hdmi- or component-IN…
… got it at eBay for ~70€ plus 30€ for the software....
I'm using MacOS 10.9… works like charme…

How can I make an icon that links to a webpage that works with Mac and Windows??

Hi!
I burn CDs with my photos and send them to clients. Besides the photos folder, I would like to include a file (similar to the .webloc files on the Mac Desktop) that can be clicked and it will be linked to my website - it will open up a browser window and go to my website . Is it posssible to make one of these icons that works with both Macs and Windows machines? Thanks!

Now it works! Thanks, Denico!
The reason I saved to text: The first time I followed your instructions, it did not work. I tried to figure out what I did wrong and saw that you wrote to "save as plain text." I did not know what this means and there was no option available to save a plain text. So I looked around and saw "save as stationery" and I guessed that maybe that was what you meant. And after that, it worked! But the next thing you know, the icons started duplicating themselves.
I guess I had made a different mistake in the beginning and I fixed it without knowing what it is.
Thanks for clearing that up.
But just one question. WHY does saving as "stationery" make an icon duplicate itself?

A UPS model that works with Mac Native software to do a graceful shutdown and automatic restart during a power failure.

I've tried 3 UPS's (2 APC and one TripLite) that state they are OSX compatible, however, they do not fully respond to the native osx setting in (system Preferences/ Energy Saver/ UPS/Start up automatically after a power failure). This is what happens:
During a power outage, the OS does a graceful shutdown, but does not reboot when power is restored.
Apparently, the UPS is not notified to turn off during the shut down process. The power (on-Off-On) cycle is required by the mac to restart.
Trip lite tech support says they have software that works with Windows and linux to do this, but not mac.
I've tried two older APC UPS's, One Smart UPS1500 and a Back-UPS 1500 with the same result on two different servers and one iMac.
At this point I'm looking for a make and model of a UPS that does work. If anyone can verify a make and model that actually does this, I'd greatly appreciate it.
Its a simple test, just pull the plug on your UPS, wait for the system to shut down, and then plug the UPS back in. The system should reboot.

Many of the CyberPower UPS units are compatible. Checkout the home solutions on this page: http://www.cyberpowersystems.com/products/ups-systems.html

I just upgraded to os 10.9.5. When I try to open iPhoto, I am told that the version I have(9.3), is not compatible with the os. But it came with it when I upgraded. What do I have to do to get an iPhoto that works with 10.9.5? TIA

I just upgraded to os 10.9.5 on my 15 " macbook pro from os 10.7.5. When I try to open iPhoto, I get the message that it is not compatible with the os. How can that be??? It came with the upgrade. It says the version of iPhoto is 9.3. How do I get an iPhoto that works with os 10.9.5? TIA

This screenshot shows which previous versions of iPhoto are compatible with Mavericks. It also indicates which versions qualify for a free upgradeto iPhoto 9.5.1 and which require a purchase:
Note 1: every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
Note 2: If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1

Looking for an app that works with Mac and iPhone that will set calendar reminders of birthdays in contacts.

Looking for an app that works with Mac and iPhone that will set calendar reminders of birthdays in contacts.

Hi ron1098,
Try my application Dates to iCal. it runs on the Mac, but you can sync the calendar to your iOS device.
See more about Dates to iCal here. It is £4 shareware with a 2 week demo.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Anyone know a calendar creator program / software for iMac/MacBook that works with Maverick?

Looking for a Calendar Creator type software that works with Maverick for iMac / MacBook. Please help.

Quicken 2007
Quicken 2015 information

Making a DVD that works with surroung Sound

Similar Messages

Maybe you are looking for