Making a Primary Server a Peer

I am trying to follow the instructions from Zenworks 10 Configuration management system administration reference - to move a Primary server back to a peer.
I am rolling out a 5000+ workstation Zen 10 school district and moved one of the servers into a child role attempting to troubleshoot a different issue. When I decided to move it back, I discovered contrary to the documentation the "move" feature in server hierachy stays disabled when I select my child primary server. The instructions indicate that I would check the child primary server and use the "move" feature to set the server back up as a peer. Has anyone else seen this and found a way to move a server back into a peer relationship???
John Reichling

jreichling084,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Rebuilding Unity Primary server

We have a unity primary and failover server and we need to rebuild both. In the instructions it states if you rebuild the Primary first by failing over and making the failover server the primary you will need to do a dirt restore to the newly configured box prior to running failover config. Can someone please expalin why you would need to restore data to the newly rebuilt server prior to running the failover wizard. I would think that you keep the newly rebuilt server with a clean database and run the failover wizard on both the primary and the failover and it synchs the database with the newly rebuilt server.

Here is the information for DiRT as per http://www.ciscounitytools.com/Applications/Unity/DIRT/Help/index.html
"When restoring a backup intended to work as a failover system, be sure to restore the DiRT backup to a stand alone server first, make sure it's running properly then run the failover configuration wizard on that server. You cannot restore a DiRT backup onto either a primary or secondary failover pair, it will not work properly. If you have two Unity servers configured for fail over it's best to backup the Unity server configured as the fail over server, not the primary if possible. The primary Unity server will have additional links in SQL setup for replicating to the fail over server database and these links will be broken when you restore to a new server. If you then try to reconfigure fail over capabilities on that server it will fail. There’s no way to automatically remove these flags from the backed up database so if you have backed up the primary Unity server you will need to manually clean up the SQL properties after restore. The DiRT restore notices the fact that the restored database has these links and will pop up a warning dialog at the end of the restore reminding you of these."
Hailey
Please rate helpful posts!

Communication between the primary server the gateway server

hallo
Can I set the directional communication between the primary server the gateway server, so it feels by the following example?
And if so how?
Agent
à GW
ß GW
ß MS
*Agent communicates with GW1 and reported it
*GW SEND report to GW2
*GW2 Send the the data to MS
thanks
<o:p></o:p>
אם תגובתי פתרה את בעייתך - לחץ/י, על "סמן כתשובה" ליד סימן ה V הירוק.

Hi,
As far as I know, Gateways dont talk to each other. Why you need two GW, with one GW and report to your management servers, this way should work.
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/systemcenter/en-US/323d5aab-bad4-4c23-b096-27a62757ae31/communications-between-2-gateway-servers-and-2-ms?forum=operationsmanagerdeployment
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Upgraded ZENworks Primary Server Will Not Refresh

Good Afternoon,
I recently upgraded our primary server from ZENworks 11.2-11.3a.
The upgrade procedure completed with no errors. However, the server will not refresh it's status in the ZENworks Control Center. Control Center continues to report the server as 11.2.0.0. The UI of the Control Center is upgraded. The agent continues to push back the next contact with server time without updating the last contact with server time
Things I have tried:
-doing a manual refresh through control center gives a "Connection Failed" error
-doing a manual refresh with zac ref completes successfully but does not update anything
-cleared the agent cache using zac cc
Any help would be appreciated.
Thank you very much!

Try the solution you find in this thread:
http://forums.novell.com/novell-prod...nt-management/
zenworks/configuration-management/zcm-11/zcm11-agent-deployment-linux/45
5516-how-recover-lost-trust-relationship-zone-configuration-between-linu
x-zcm-agent-primary-zone-server-running-same-machine.html
W. Prindl
wpico wrote:
>
>CRAIGDWILSON;2331318 Wrote:
>> This is because the Agent Service (Servers have an agent too)
>>cannot talk to the zone.
>>
>> Normally the only time this is noticed is during a "System Update",
>> since this is one of the few times the failure would be noted.
>>
>> However, the 11.3.0 Upgrade would not have relied on the agent
>>server and since you upgraded from 11.2.0, another ISO install, it
>>is quite possible there were always some issues there.
>>
>> "zac retr" might help, but it also may be wise to open an SR so
>>they can
>> see what is wrong and not just have you poking and prodding your
>>only primary.
>>
>>
>> On 8/28/2014 4:46 PM, wpico wrote:
>> >
>> > nop1983;2331309 Wrote:
>> >> wpico wrote:
>> >>
>> >>>
>> >>> Good Afternoon,
>> >>>
>> >>> I recently upgraded our primary server from ZENworks
>>11.2-11.3a. >>>
>> >>> The upgrade procedure completed with no errors. However, the
>> server
>> >>> will not refresh it's status in the ZENworks Control Center.
>> Control
>> >>> Center continues to report the server as 11.2.0.0. The UI of
>>the >>> Control Center is upgraded. The agent continues to push
>>back the next
>> >>> contact with server time without updating the last contact with
>> server
>> >>> time
>> >>>
>> >>> Things I have tried:
>> >>> -doing a manual refresh through control center gives a
>>"Connection >>> Failed" error
>> >>> -doing a manual refresh with zac ref completes successfully but
>> does
>> >>> not update anything
>> >>> -cleared the agent cache using zac cc
>> >>>
>> >>> Any help would be appreciated.
>> >>>
>> >>> Thank you very much!
>> >>
>> >> Only one server?
>> >> Sounds like the agent could have lost the trust, somehow... The
>> update
>> >> went fine?
>> >>
>> >> --
>> >> Niels
>> >> I have always liked... Cowabunga!
>> >>
>> >> If you find this post helpful, please show your appreciation by
>> clicking
>> >> on the star below.
>> >> A member must be logged in before s/he can assign reputation
>>points. >
>> > Completed with no errors, The log file was all green.
>> >
>> >
>>
>>
>> --
>> Going to Brainshare 2014?
>> http://www.brainshare.com
>> Use Registration Code "nvlcwilson" for $300 off!
>>
>>
>> Craig Wilson - MCNE, MCSE, CCNA
>> Novell Technical Support Engineer
>>
>> Novell does not officially monitor these forums.
>>
>> Suggestions/Opinions/Statements made by me are solely my own.
>> These thoughts may not be shared by either Novell or any rational
>>human.
>
>When I run zac retr I get, "Failed to re-establish trust with zone"

Script to redirect a Application to secondary server if primary server is not available in a .ini file

Hi Team,
I want to write a script in the .ini file of an excel add-in on the users windows system , where if the primary server is not available it should automatically redirect to the secondary server.
Can someone help me in this?

Hi Jrv,
As I said its an Add-in (Twuploader) in excel which uses a ini file to connect to a server. I want the addin to connect to another available server when the primary is not available. This is the ini file content below:
[TradeWeb]
Host=Server1
Port=8002
User=abcd
[Upload]
AutoMode=N
UserInt=5
[Toolbar]
Visible=Y
Row=26
Pos=1
Top=-32000
Left=-32000
Let me know how to edit this ini file so that if Server1 is unavailable it should connect server2.

VIP still reachable even if primary server farm is down

Hi,
I want to make sure that the a VIP is not PING-able anymore when the primary server farm is down (all servers are down).
For that I have the following configuration :
serverfarm host NCL_FARM_TEST
probe NCL_PROBE_HTTP
rserver CHPAUN028 443
inservice
policy-map type loadbalance http first-match L7_POLICY_NCL_TEST_HTTP
description *** Load balancing rule for test in http mode ***
class L7_CLASS_TEST
serverfarm NCL_FARM_TEST backup NCL_REDIRECT_FARM_SORRY
compress default-method gzip
insert-http Source-IP header-value "%is"
insert-http Remote-Port header-value "%pd"
ssl-proxy client NCL_SSL_CLIENT
policy-map multi-match VIP_PROD_AND_TEST
class L4_CLASS_NCL_TEST_HTTP
loadbalance vip inservice
loadbalance policy L7_POLICY_NCL_TEST_HTTP
loadbalance vip icmp-reply active primary-inservice
nat dynamic 2 vlan 115
appl-parameter http advanced-options NCL_HTTP_PARAM
While testing this feature, I realize that the VIP is still reachable (PING), even if the server in the farm is in PROBE_FAILED status (For test, I have only one srserver in the farm).
Here is the server farm status, while PING is still possible :
CH01AC03/P-115-A# sh serverfarm NCL_FARM_TEST detail
serverfarm : NCL_FARM_TEST, type: HOST
total rservers : 1
active rservers: 0
description : *** Test Server Farm ***
state : INACTIVE
predictor : ROUNDROBIN
failaction : -
back-inservice : 0
partial-threshold : 0
num times failover : 27
num times back inservice : 28
total conn-dropcount : 0
Probe(s) :
NCL_PROBE_HTTP, type = HTTP
----------connections-----------
real weight state current total failures
---+---------------------+------+------------+----------+----------+---------
rserver: CHPAUN028
10.240.3.128:443 8 PROBE-FAILED 0 609 8
description : -
max-conns : - , out-of-rotation count : -
min-conns : -
conn-rate-limit : - , out-of-rotation count : -
bandwidth-rate-limit : - , out-of-rotation count : -
retcode out-of-rotation count : -
In the documentation, the following is written regarding the command "vip loadbalance icmp-reply active primary-inservice" it is stated that the ACE shold discard ping packets if all servers in the primary server farm are down.
I probably missed something, but what ?
Here is the service-policy status :
Policy-map : VIP_PROD_AND_TEST
Status : ACTIVE
Interface: vlan 1 115
class: L4_CLASS_NCL_TEST_HTTP
nat:
nat dynamic 2 vlan 115
curr conns : 0 , hit count : 56
dropped conns : 0
client pkt count : 809 , client byte count: 231750
server pkt count : 1262 , server byte count: 1375334
conn-rate-limit : 0 , drop-count : 0
bandwidth-rate-limit : 0 , drop-count : 0
loadbalance:
L7 loadbalance policy: L7_POLICY_NCL_TEST_HTTP
VIP ICMP Reply : ENABLED-WHEN-PRIMARY-SF-UP
VIP State: INSERVICE
Persistence Rebalance: ENABLED
curr conns : 0 , hit count : 56
dropped conns : 0
client pkt count : 809 , client byte count: 231750
server pkt count : 1262 , server byte count: 1375334
conn-rate-limit : 0 , drop-count : 0
bandwidth-rate-limit : 0 , drop-count : 0
compression:
bytes_in : 1052393
bytes_out : 309229
Compression ratio : 70.61%
Parameter-map(s):
NCL_HTTP_PARAM
Thank you for any hints,
Yves Haemmerli

Gilles,
I have effectively four diferent policy maps :
- one for PROD when the client arrives withh HTTP
- one for PROD when the client arrives with HTTPS
- one for TEST when the client arrives with HTTP
one for TEST when the client arrives with HTTPS
However, the PROD and the TEST environemnts use different server farms. I am testing the icmp-reply feature on the TEST environment. In the TEST environment, both Layer-7 policy maps use the same server farm.
Here are the four polici maps :
policy-map type loadbalance http first-match L7_POLICY_NCL_PROD_HTTP
description *** Load balancing rule for production in http mode ***
class L7_CLASS_PROD
serverfarm NCL_FARM_PROD backup NCL_REDIRECT_FARM_SORRY
insert-http Source-IP header-value "%is"
insert-http Remote-Port header-value "%pd"
ssl-proxy client NCL_SSL_CLIENT
class L7_CLASS_REDIRECT
serverfarm NCL_REDIRECT_FARM_PROD_HTTP
policy-map type loadbalance http first-match L7_POLICY_NCL_PROD_HTTPS
description *** Load balancing rule for production in https mode ***
class L7_CLASS_PROD
serverfarm NCL_FARM_PROD backup NCL_REDIRECT_FARM_SORRY
insert-http Source-IP header-value "%is"
insert-http Remote-Port header-value "%pd"
ssl-proxy client NCL_SSL_CLIENT
class L7_CLASS_REDIRECT
serverfarm NCL_REDIRECT_FARM_PROD_HTTPS
policy-map type loadbalance http first-match L7_POLICY_NCL_TEST_HTTP
description *** Load balancing rule for test in http mode ***
class L7_CLASS_TEST
serverfarm NCL_FARM_TEST backup NCL_REDIRECT_FARM_SORRY
compress default-method gzip
insert-http Source-IP header-value "%is"
insert-http Remote-Port header-value "%pd"
ssl-proxy client NCL_SSL_CLIENT
class L7_CLASS_REDIRECT
serverfarm NCL_REDIRECT_FARM_TEST_HTTP
policy-map type loadbalance http first-match L7_POLICY_NCL_TEST_HTTPS
description *** Load balancing rule for test in https mode ***
class L7_CLASS_TEST
serverfarm NCL_FARM_TEST backup NCL_REDIRECT_FARM_SORRY
insert-http Source-IP header-value "%is"
insert-http Remote-Port header-value "%pd"
ssl-proxy client NCL_SSL_CLIENT
class L7_CLASS_REDIRECT
serverfarm NCL_REDIRECT_FARM_TEST_HTTPS
Yves

Unable to contact Primary Server

Neither of my Macbook Pros can access the Primary Server this morning - 10.33 BST.

Try updating the router's firmware..It should resolve your problem.Follow this link to upgrade the firmware.After upgrading the firmware...reset the router and reconfigure it from the scratch.
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

ZCM 11.2 new primary server - How do I

Hi,
We currently have a ZCM 11.2 install sitting on a Windows Server 2003 32bit. I have a new server running Windows 2008 64bit which I want to move the ZCM install to. I have looked at the various disaster recover scenarios as provided by novells documentation 11.2 disaster recovery reference but dont see in "replacing the primary server with a secondary server" a supported option of going from Windows server 2003 32bit to Windows server 2008 64bit.
I see this is supported in the replacing primary with a new server (eg same IP etc) but this is not the scenario I wish to follow.
Is my direction to simply install another copy of 11.2 as a secondary primary? on my 2008 64bit, go into existing management zone, follow the directions in the above reference doc in section 2.1.
I am wondering though with the secondary primary (2008 64bit) how do I go about moving the internal sybase from the old primary across to the new secondary. It has a reference to how to move the internal to and external sybase but I want the secondary primary (which will be the new primary) to have an internal sybase database like the old primary.
Any help appreciated.

Yes, that would Be ideal as it was / is my primary DSFW onsite & DNS. So the new ZCM Box would have a different name & IP.
My thought was bring up a Second Primary in the exiting ZONE. Get it functioning / updated. (That's been an issue as well, but that will be another thread). Look at doing a DB /Content migration to the new server and shutting down the ZCM services on the old...I am sure I am missing some stuff....
What other options do we have? I am all ears....I am assuming you / we can not do the "Import/Upgrade" routine to the OVA.
Originally Posted by CRAIGDWILSON
Will the OES Box Stay in production?
If so, you will need to rename and change the IP address of one of them.
We can think through different options.
On 8/28/2014 7:16 PM, MCCFL MLA wrote:
>
> clarja;2320238 Wrote:
>> Thanks Anders that would be appreciated.
>>
>> I may have to rethink how I`m going about this, possibly virtualise the
>> server I am thinking of replacing and taking on the same name and IP as
>> the existing ZCM primary.
>
> Where did you shake out with this? I have a similar scenario, as I have
> a single Primary 11.2.4MU1 install on a OES11SP2 / SLES11SP3 box with
> DSFW. But now keeping ZCM on an OES box is not supported... So what I
> would like to do is bring up another server Possibly a Secondary Primary
> (VM - OVA) patch to the equivalent level and then somehow
> transfer.....the role as primary and remove the original.....
>
>
Going to Brainshare 2014?
http://www.brainshare.com
Use Registration Code "nvlcwilson" for $300 off!
Craig Wilson - MCNE, MCSE, CCNA
Novell Technical Support Engineer
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

SCUP2011 Installation & Configuration in a hierarchy having 1 CAS+4 Primary Server

Hi,
We have a SCCM Environment having 1 CAS server with 4 Primary Server. For third party update management, we have to install SCUP 2011. Now my question is what will be the best practice for installation of SCUP2011 in this environment.
Thanks
Pallavi

Basically it does not matter where SCUP is installed. Just make sure that it connects to the topmost SUP (which should be already installed on the CAS).
Torsten Meringer | http://www.mssccmfaq.de

Secondary DPM server does not show "protected server group" when attempting to protect primary server

Hi Guys,
I have a bit of a weird situation with DPM 2012(pre SP1). We have a primary server which is running quite happily(protects 8 SQL servers). I'm attempting to setup a secondary. When I've done this in the past with other DPM versions(this version included)
all i have to do is this following:
Install the same version of DPM on the "secondary machine"
Attach the agent on the "primary server"
Create a new protection group for everything
The catch is that I only see the following:
I can successfully protect the database of the primary server. However the secondary server cannot see any computers protected on the primary for some reason. Any ideas why this object doesn't show at all?

Hi,
At any time, was the primary DPM Server rebuilt and it's database restored ?
Can you verify that the DPMWriter service is running.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

DMZ Ports to Communicate with SCCM Primary Server

Hello,
I have searched and came to know that on firewall, following ports should be open for DMZ to communicate with SCCM primary server
HTTP 80 and 443
8530
TCP 10123
TCP 135TCP 445
We are planning to implement a software on DMZ server which should communicate with SCCM primary server.
Do the above ports work for communication from DMZ to Primary or if there are more ports required for it?
Is it possible to achieve this without the SCCM client installed on the DMZ server as i would like the software to communicate via its own methods but the required ports should be open.

Could you please provide the WMI and SQL ports which would be required.
If we talk about generically, Are below ports enough for a DMZ server to communicate with the primary site server ?
HTTP 80 and 443
8530
TCP 10123
TCP 135TCP
445

Update Primary server OS from 2008 R2 to 2012 R2

Anyone had any experience doing an in-place OS upgrade on a ZCM primary server? I have a single primary server currently running Server 2008 R2 and would like to update it to 2012 R2. Would I be better off building a new primary server?
Thanks

Originally Posted by smflood
On 03/02/2015 17:56, reizarf27 wrote:
> Anyone had any experience doing an in-place OS upgrade on a ZCM primary
> server? I have a single primary server currently running Server 2008 R2
> and would like to update it to 2012 R2. Would I be better off building
> a new primary server?
Which version of ZENworks are you running?
Support for Windows 2012 Server R2 was only added with the 11.3.1 Update
for ZENworks 11 SP3 so you would need to at least be running that
version before upgrading the Windows Server OS.
HTH.
Simon
Novell Knowledge Partner
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks.
Sorry, should have posted that. We are running 11.3.1 right now.

Multiple primary server and one stand by server

Friends,
Can we have multiple primary servers and one stand by server.
That is to say ,\
can we have a system where there are primary servers at different locations and one stand by server
in another location, so that all the changes that are happenign in all teh preimary servers can be seen
and queried in stand by server.[logical]
Assuming the prinmary servers have the same database structure.

can we have a system where there are primary servers at different locations For one primary server there will be one standby server.
stand by server in another location, so that all the changes that are happenign in all teh preimary servers can be seen and queried in stand by server.[logical].You can have a standby server in a remote location and use it for reporting purpose, but you should put ur standby db in readonly mode till 10g. In 11g I think you can put ur standby database in managed recovery mode and still you can use it for reporting purpose.
Satya.

Secondary Server MP is not working after primary server database up gradation.

Hi All,
Required your Help for MP Issue.
we had migrated the SQL data base in one of our Primary server, where there is 10 secondary servers are available.
7 secondary servers are working fine and remain 3 servers MP has down after the migration.
PFB the MPcontroal log.
NetBIOS_AddName(): LocalName: MP_XXX LanaNumber: 2
SMS_MP_CONTROL_MANAGER 7/8/2014 1:23:49 PM
4480 (0x1180)
RegisterWithWINS: NetBIOS_AddName(LANA=2) returned 0x0
SMS_MP_CONTROL_MANAGER 7/8/2014 1:23:52 PM
4480 (0x1180)
NetBIOS_AddName(): LocalName: MP_XXX LanaNumber: 7
SMS_MP_CONTROL_MANAGER 7/8/2014 1:23:52 PM
4480 (0x1180)
RegisterWithWINS: NetBIOS_AddName(LANA=7) returned 0x0
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
MPStart(): RegisterWithWINS() returned 0x0 SMS_MP_CONTROL_MANAGER
7/8/2014 1:24:04 PM 4480 (0x1180)
MPStart(): PublishInDNS() returned 0x0 SMS_MP_CONTROL_MANAGER
7/8/2014 1:24:04 PM 4480 (0x1180)
Successfully Registered for IP Address Change notifications.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
MPStart(): RegisterForIPAddressChangeNotification() returned 0x0
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
Attempting to register the SQL connection type for the configured SQL database.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
Registered connection type for SQL Server 'XXX.com' and database 'SMS_XXX'.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
MPStart(): RegisterSqlDatabaseConnectionType() returned 0x0
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
Checking the current CLR Enabled configuration setting for the configured SQL Server hosting the database.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
Getting the CLR Enabled value from the configured SQL database.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
Attempting to connect to the configured SQL database.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
*** [08001][18][Microsoft][ODBC SQL Server Driver][DBNETLIB]SSL Security error
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
*** [01000][772][Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (SECDoClientHandshake()).
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
*** Failed to connect to the SQL Server. SMS_MP_CONTROL_MANAGER
7/8/2014 1:29:06 PM 4480 (0x1180)
Failed to get connection to the configured SQL database.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
Failed to connect to the configured SQL database.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
Failed to get the current CLR Enabled configuration setting for the configured SQL Server hosting the database.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
MPStart(): CheckSqlDatabaseClrEnabled() returned 0x800720d9
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
Waiting up to 300 seconds for the SMS Agent Host service to be running.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
Stopped waiting for the SMS Agent Host service to be running; error = 0x0.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
MPStart(): WaitOnSmsAgentHostRunning() returned 0x0
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
MPStart(): CreateThread() succeeded with id 0xc94.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
SMS_MP_CONTROL_MANAGER successfully STARTED.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
Configuration and Availability Monitor thread started.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
3220 (0x0C94)
Initialized 'SMS Server Availability' performance instance => SMS Management Point.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
3220 (0x0C94)
Call to HttpSendRequestSync failed for port 80 with status code 500, text: Internal Server Error
Thanks in Advance.
Regards,
Raj.

Yes, I know this is an old post, but I’m trying to clean them up.
Based on your log file the problem appears to be a permission issue. “Failed to connect to the configured SQL database.”
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

What primary server problem,fail to connect,how to i resolve ,please give idea

what primary server problem,fail to connect,how to i resolve ,please give idea

Hi,
can you provide more information please? Thank you !

Making a Primary Server a Peer

Similar Messages

Maybe you are looking for