Making a Selected state for a button

Im being really stupid, im making a simple button (ive made
the up, over, down and hit states) but i want the button to remain
selected in the hit colour not just when it is pressed but when it
is selected. Is there a way of adding a selected state??
Thanks for any help

Hi Adam
Please do not post multiple post on the same subject.
2 hours is barely any time to wait for reply, it might take
many more hours or days
before anyone find time to entertain your thread, so please
post and relax.
Regards
Urami
Happy New Year guys - all the best there is in the 2006 :)
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free>

Similar Messages

How to write Select statement for this codition

I need to check whether SGTXT contains BELNR value.
SGTXT is a text field and It should be matched with BELNR
How to write select statement for this.
Select AUGBL AUGDT into t_BSAD
from BSAD
where SGTXT should have the given BELNR Value.
Plz note : Here I cannot give as SGTXT = BELNR as coz BELNR have only 10 digits.

Hi,
data temp(12).
concatenate '%' belnr '%' into temp.
Select AUGBL AUGDT into t_BSAD
from BSAD
where SGTXT like temp.
If belnr is having multiple values,just create a internal table as follows.
types : begin of ty,
        belnr....
        temp(12),
        end of ty.
data itab_ type standard table of ty.
data wa type ty.
loop at itab into wa.
concatenate '%' wa-belnr '%' into wa-temp.
modify itab from wa index sy-tabix transporting temp.
endloop.
Change your select statement accordingly.
Kindly reward poits if it helps.

Select statement for summing values in column?

How to write a select statement for sap standard table which contains data as given below
col1        col2
A     10
A     20
A     30
B     50
B     60
C     70
Need the output of select in internal table as given below
A     60
B     110
C     70
Regards,
Rachel

Thanks for all the valuable input.
Below I have used sum in select statement(check case 2"),but i am not getting required o/p.
Kindly guide me.
case1 :
select aebeln aebelp bpackno bmenge
into corresponding fields of table itab
from ( eslh as a inner join esll as b
on bpackno = apackno )
where a~ebeln = 6000000100
and a~ebelp = 00010
and a~packno = '0000001025'
order by aebeln aebelp b~packno .
O/p for the above .
ebeln                       ebelp         packno                             menge
6000000100     00010     0000001025              6.000
6000000100     00010     0000001025               5.000
6000000100     00010     0000001025              2.000
6000000100     00010     0000001025              1.000
6000000100     00010     0000001025              2.000
case2:
select aebeln aebelp bpackno sum( bmenge )
into corresponding fields of table itab
from ( eslh as a inner join esll as b
on bpackno = apackno )
where a~ebeln = 6000000100
and a~ebelp = 00010
and a~packno = '0000001025'
group by aebeln aebelp b~packno
order by aebeln aebelp b~packno .
6000000100     00010     0000001025     0.000
Edited by: Rachel on Nov 25, 2008 11:45 AM
Edited by: Rachel on Nov 25, 2008 11:46 AM

DISTINCT in SELECT statements for Entities / Views - Oracle JDeveloper 11G

Hi Steve,
i have a question about using DISTINCT in SELECT statements for
Entities / Views. On Oracle JDeveloper 11G ADF / BC4J
--- This is unique---
SELECT
distinct(GC."course_title"),
GC.SEC_GRP_PARENT_ID,
from "grp_courses" GC
--- This is NOT unique, but ROWID seems to be mandatory as PrimaryKey---
SELECT
distinct(GC."course_title"),
GC.SEC_GRP_PARENT_ID,
rowid
from "grp_courses" GC
How to use this query;
SELECT
distinct(GC."course_title"),
GC.SEC_GRP_PARENT_ID,
from "grp_courses" GC
and yet still be able to use it in View / Entity without a Primary Key or some equivalent solution.
Thanks & Regards,

Hi, OK - I got it to work...
Some notes:
1) The View wizard cannot be initiated from the Entity Object.
2) During the View wizard process - do not associate with Entity
3) Selected columns must be mapped as expressions
4) Using non-distinct columns will override the distinct function

Regarding select statement for this requirement

Hi................
good evening
here is a requirement.
i want to retrieve data from the following table.but how to join these table is my dought.
tables fields
t001w--werks " plant id
t001w--name1 " pl;ant name
t001w--regio " plant address
ekko--ebeln " purchase order
ekko-erdat : creation date
ekko-ernam "name of the person
ekpo-ebelp " item
ekpo-bstyp "purchase order type
eket-erdat " delivery date
mara-matnr " material number
these are the tables and fields.now we want to retrive data from these tables
how we have to code select statement.
selection-screen is
plant id
order type
delivery date
please provide select statement for this requirement.
thanks and regards.
k.swaminath reddy.

Is this what you are looking for?
SQL> CREATE OR REPLACE FUNCTION f_team
2 RETURN VARCHAR2
3 IS
4    s_return VARCHAR2(500);
5 BEGIN
6    FOR i IN ( select team from t_team order by 1) LOOP
7      s_return := s_return || i.team || ', ';
8    END LOOP;
9
10    RETURN substr(s_return, 1, length(s_return) - 2);
11 END;
12 /
Function created.
SQL> SELECT f_team FROM dual;
F_TEAM
Australia, Bangladesh, England, India, Kenya, Pakistan, South Africa, UAE, USA, West Indies, Zimbabwe
SQL>

Need Select statement for fetch the details

Hi
i want to fetch particular customer wise sales orderds and that sales order No and date of sales order was created.. and that sales order related PO No and Materials ..
for this.. how can i write an executable programm.. is it needed to define seperate internal tables or single internal table is enough ?
what is the select statement for fetching all these details..
any help will be appriciated
Thanks
Bbau

custmer master table is KNA1 knb1 knbk
sales data tables r VBAK VBAP VBEP
Material data MARA, MARAC, MARD
PO RELATED ekko ekpo eket
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 13, 2008 3:04 PM

Equivalent select statement for complex selection

HI,
What is the equivalent select statement for below mentioned condition.
SELECT-OPTIONS : SALEDOCU FOR VBAK-VBELN OBLIGATORY,
                 DATE     FOR VBAK-ERDAT OBLIGATORY,
                 CHANEEL FOR VBAK-VTWEG,
                 SALETYPE FOR VBAK-AUART OBLIGATORY DEFAULT 'QT'
                 NO INTERVALS NO-EXTENSION.
Regards,
John.

hi,
you can use following code.
tables vbak.
data : begin of t_vbak occurs 0.
         include structure vbak.
data : end of t_vbak.
select * from vbak into table t_vbak where
                        vbeln in saledocu and
                        erdat in date and
                        vtweg in chaneel and
                        auart in saletype.
Hope this helps.
Regards,
Shashank

Select statement for retrieving infotype 1005 values w,r,t payscale

Hi All,
could you pls help me for the below requirement
"select statement for retrieving infotype 1005 values with respect to the pay scale level.
because pay scale level is having range of values in the infotype"
Thanks in advance
Prasad
Please try it yourself first.
Edited by: Suresh Datti on Aug 9, 2009 4:52 PM

Hi,
Code which you have written is correct when the R_DATE is having LOW and HIGH values, if the R_DATE is having only LOW value then this will be wrong, becuse if the R_DATE is having only LOW then OPTION value is not BT is should be EQ
Regards
Sudheer

How to add interaction to button that only appears in selected state of radio button?

Hi all,
This is my first time working with flash catalyst, so far it's going pretty good. There is only one thing that I cannot get the program to do:
I'm creating a quiz and I want a button to appear when the correct radio button is clicked. I've succeeded in making the button appear by putting it in the selected state of the correct radio button. But when I try to add the interaction 'go to next page' to this button, it doesn't work. It appears that the button is getting the same properties as the radio button it's connected to. When I put the button on the page and make it constantly visible (by taking it out of the selected state of the radio button), it does work.
Can anybody tell me what I am doing wrong?
Thank you very much,
Sisko

Hi there,
For interactions, you can only target items within the current document (the object you are editing in place), or the top level application.
Panini is a bit more flexible with interactions, so you may want to try that out.
-Bear

Using variable in from close of select statement for LOV

Hi all,
I had a select list based on a query with a variable in it for the database schema. Something like this:
"select name, id from &SCHEMA..countries order by name". This warked in version 1.4.4..., I don't remember the rest. Now we upgraded to version 1.6.0.00.87 and I am trying to change the condition for this select item but I recieve this error:
1 error has occurred
LOV query is invalid, a display and a return value are needed, the column names need to be different. If your query contains an in-line query, the first FROM clause in the SQL statement must not belong to the in-line query.
Whatever I'm trying to change for this item, it always gives me this error when I click on "Apply Changes" button. Everything works fine when I remove &SCHEMA. from the query and instead write directly the database schema name.
Can you help me?

Sabiha,
This is a case where the builder cannot parse the query at design time because there is no state for &SCHEMA. in the session. You can try this trick, change the lov query to: if htmldb_application.get_current_flow_sgid(:APP_ID) = htmldb_application.get_sgid then
return 'select name d, id r from &SCHEMA..countries order by name';
end if;Notice also the addition of aliases for the column names.
Scott

Use of LIKE in where clause of select statement for multiple records

Hi Experts,
I have a account number field which is uploaded from a file. Now this account numbers uploaded does not match fully with sap table account numbers but it contains all of the numbers provided in the file mostly in the upright positions.
For example in file we have account number as 2ARS1 while in sap table the value is 002ARS1.
And i want to fetch data from sap table based on account number uploaded. So, i am trying to use LIKE with for all entries but its not working as mentioned below but LIKE is not working with FOR ALL ENTRIES.
data : begin of t_dda occurs 0,
        dda(19) type c,
       end of t_dda.
data : begin of t_bukrs occurs 0,
        bukrs type t012k-bukrs,
       end of t_bukrs.
data : dda type t012k-bankn,
       w_dda type t012k-bankn.
CONCATENATE '%'
                         '2ARS1'
                 INTO W_DDA.
MOVE W_DDA TO T_DDA-DDA.
APPEND T_DDA.
CLEAR T_DDA.
free t_bukrs.
SELECT BUKRS
FROM T012K
into TABLE t_bukrs
    for all entries in t_dda
WHERE BANKN like t_dda-dda.
Can anybody suggest what should i use to get the data for multiple account numbers using one select statement only instead on using SELECT UP TO 1 ROWS in LOOP....ENDLOOP ?
Thanks in advance,
Akash

Hi,
yes, For All entries won't work for LIKE with '% '.
I think the other alternative is go for Native SQL by writing sub-query
sample code is here:
data: begin of i_mara occurs 0,
          matnr like mara-matnr,
          matkl like mara-matkl,
       end of i_mara.
exec sql.
select matnr, matkl from mara where matnr in (select matnr from marc) and matnr like '%ma' into :i_mara
endexec.
loop at i_mara.
write:/ i_mara-matnr, i_mara-matkl.
endloop.
hope u got it.
regards
Mahesh
Edited by: Mahesh Reddy on Jan 21, 2009 2:32 PM

Using if the else logic in regards to a select statement for a report

Hi all,
I've a question regarding if then else logic in Oracle.
I'm developing a report application which contains 3 selectlists
- ProductGroup - SubGroup - Manufacturer
Each one containing several values. And are based on eachother, meaning if you select an item from the PG list, you only get the SG items regarding the PG item you've choosen before. The process logic should be as the following:
When a user selects one item from for example the PG list, the query will be:
select * from x where PG = :P_PG
and the report displays all the items in the PG category selected
The other two bindvariables would be null as the user didn't pick them
If he then proceeds and selects one item from the SG list, the query would be:
select * from x where PG = :P_PG and SG = :P_SG
and the report displays all the items in the PG and SG category selected
If he then proceeds and selects one item from the MA list, the query would be:
select * from x where PG = :P_PG and SG = :P_SG and MA =:P_MA
and the report displays all the items in the PG and SG and MA category selected
Now, I've read some documentation about the decode function, but I can't figure it out, please help.
Peter

Okay, Chet, have set it up on htmldb, so you can see my problem, will go in high detail, it is not producing what I want. Example on htmldb:
DEMO/test
http://htmldb.oracle.com/pls/otn/f?p=33229:6
Defenitions:
3 LOV's, namely:
- LOVPG - select distinct productgroep, productgroep pg from plijst
- LOVSG - select distinct subgroep, subgroep sg from plijst where productgroep = :P6_LOVPG
- LOVLE- select distinct leverancier, leverancier le from plijst where productgroep = :P6_LOVPG and subgroep = :P6_LOVSG
3 Selectitems with submit, namely:
- :P6_LOVPG
- :P6_LOVSG
- :P6_LOVLE
Report region select statement:
select * from plijst where (productgroep = :P6_LOVPG or :P6_LOVPG IS NULL) and (subgroep = :P6_LOVSG or :P6_LOVSG IS NULL) and (leverancier = :P6_LOVLE or :P6_LOVLE IS NULL)
Branch to:
Branche to page on submit after processing
What it should do is:
When you select an item from the first selectlist, productgroep, the report should show all rows containing the specified productgroep.
When the user selects the next item in the subgroep selectlist, the report should show all rows containing the previously selected prodctgroup and the just selected subgroep.
When the user selects the final item , the report should show all rows based on all three selected itemvalues, productgroep, subgroep, leverancier.
The problem is that with this setup the report is only generated after the final selectlist choice of the user. But the user should see a report before that, going deeper into the structure. Hope, you see my problem?
Sincerely,
Pete

Performance Issue in Select Statement (For All Entries)

Hello,
I have a report where i have two select statement
First Select Statement:
Select A B C P Q R
     from T1 into Table it_t1
          where ....
Internal Table it_t1 is populated with 359801 entries through this select statement.
Second Select Statement:
Select A B C X Y Z
     from T2 in it_t2 For All Entries in it_t1
          where A eq it_t1-A
             and B eq it_t1-B
             and C eq it_t1-C
Now Table T2 contains more than 10 lac records and at the end of select statement it_t2 is populated with 844003 but it takes a lot of time (15 -20 min) to execute second select statement.
Can this code be optimized?
Also i have created respective indexes on table T1 and T2 for the fields in Where Condition.
Regards,

If you have completed all the steps mentioned by others, in the above thread, and still you are facing issues then,.....
Use a Select within Select.
First Select Statement:
Select A B C P Q R package size 5000
     from T1 into Table it_t1
          where ....
Second Select Statement:
Select A B C X Y Z
     from T2 in it_t2 For All Entries in it_t1
          where A eq it_t1-A
             and B eq it_t1-B
             and C eq it_t1-C
do processing........
endselect
This way, while using for all entries on T2, your it_t1, will have limited number of entries and thus the 2nd select will be faster.
Thanks,
Juwin

How can I call a Page Process from the Select statement for Report Page

I'm able to call a javascript using the below:
img src="#IMAGE_PREFIX#add2.gif" border="0" alt="Icon 4" onClick="javascript:add_connect1('||CPORT.ID||')"
But Now,
I'd like to accomplish (2) New things:
1. instead of using,....... onClick="javascript:add_connect1,
I'd like to call a Page Process, onClick=
2. I'd like to be able to call two different processes onClick.
a. onClick="javascript:passBack('||ID||')"
b. onClick= <Please see my question #1 above>
Can someone please help me with the syntax for this,
If indeed it can even be done?
Thanks- Gary

Greg.
It seems that my situation is the one you describe in you second paragraph, where you mention:
you could then add the ID column value as a parameter to the javascript functionBut,
I do not know how to reference the variable in my javascript nor how to use it in my on-demand process.
If you can hellp me past this last little bump, then I think I will be able to use these skills in Sooo many different areas of my design.
Here's what I've got so far:
A. In the select statement I identify the javascript as:
onClick="javascript:connect_port('<font color=blue>''||ID||''</font>')";
B. In my javascript I have this:
<script language="JavaScript" type="text/javascript">
function connect_port(ID)
var get = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=CONNECT_PORT',0);
gReturn = get.get();
get = null;
</script>
C. In my on demand function I have this:
BEGIN
INSERT INTO CCONNECTIONS_B
BLDG_ID,CLST_ID,PORT_ID,STRAND_ID
) VALUES
:P2004_BLDG_ID,:P2004_CLST_ID,:P2004_PORT_ID,:P2004_STRAND_ID1
END;
You can see that I dont know how to use the value for 'ID' in either the javascript or the On-Process function.
If you can help me out with this one, Then I can imitate it for the rest.
-Gary
Edited by: garyNboston on Apr 3, 2009 6:44 AM
Edited by: garyNboston on Apr 3, 2009 6:44 AM
Edited by: garyNboston on Apr 3, 2009 6:45 AM
Edited by: garyNboston on Apr 3, 2009 6:47 AM

Select statement for fields in dictionary

Hi Experts,
I am having a select statement as
SELECT ZPRZ1 ZTAG1 FROM V_T052 INTO TABLE NETAMT WHERE ZTERM = V_T052-ZTERM.
The error I am getting is:
V_T052 is not defined in the ABAP dictionary as a table.
When I go to se11 and see for this table.I get V_T052 as a dictionary and not as a table.Wht is the best way you recommend to solve this problem.
Thanks
Kumar..

Hi Kumar ,
Is that defined as a directory or as a view, because in my system it is defined as a Maint. view.
and i dont think you can select data from a maintanence view , you will have to use joins to select data from the tables used in the view
Regards
Arun
Message was edited by:
Arun R

Making a Selected state for a button

Similar Messages

Maybe you are looking for