Making a selection of brushes. HOW?

I have used Photoshop for many years and CS for 2 years but have never been able to suss how to make a selection of brushes one can go straight to. I have 2 books on CS and both are inexplicit about how to make a 'library' and where one accesses it when one has got it. Trial and error shows me I can delete brushes from the giant list of items very few of which I would want, but it doesn't make it clear whether one could re-access on occasion. There seems to be about 4 access points to the Brushes list. Really all I want to do is to pick out about 10 brushes at most that I can go to quickly. I don't want to delete all the rest just incase. Having become exasperated, not before time, at scrolling through a lot of nonsense to get to what I want, I tried to crack it yesterday for some hours, unsuccessfully!...so I thought maybe some kind person might give me a simple step by step instruction on how to make a simple brushes list that comes up as soon as I want it. I also don't understand why they list so many different point sizes of the same brush...what is the point given one can use the slider to change the size?
I would be really grateful for your help. Julia

Yes, thanks, I already found the preset manager ...I choose a brush I choose Assorted Brushes to save it to and it comes up with Assorted Brushes already exists do you want to replace it....what do they MEAN!
I am missing something really simple I am sure. Or I am misunderstanding something. I don't suppose you could give me a step by step example.....and it doesn't say anything about making a LIBRARY (as is constantly refered to in the books!) or is Assorted Brushes a name for a 'Library'? They are so unclear both in the books and on screen.
I am also using a graphics pad and heaven know what conflict of interests is going on there. Mostly I use trial and error with a vague idea about how to get out of trouble.
However to have a small list of brushes I regularly use easily accessible would be a great benefit.

Similar Messages

I want to order the Prepaid iPhone 4s but it's making me select a plan, I already have a plan. How do I order just the phone??? HELP

I want to order Prepaid iPhone 4s but it's making me select a plan, I akready have a plan. I just need the phone!! Help!

@sammamy14,
A new phone is always an exciting time! I apologize you are having difficulties placing your order. No worries, you can contact our prepaid customer service for assistance with the order. You can reach them at 888-294-6804. They will be more than happy to help.
JohnB_VZW
Follow us on Twitter @VZWSupport

Issues in making label selectable when used with text area

I have used the following code (which was given in the thread : Re: Making Labels and other controls with text selectable for copy&paste ]
which shows how to make label selectable with text field. )
public class TrialArea extends Application {
>>public void start(final Stage stage) throws Exception {
>>StackPane layout = new StackPane();
>>layout.setStyle("-fx-background-color: cornsilk; -fx-padding:10; -fx-font-size: 20");
>>
>>Label label1 = (new Label("jqhrjhhhhhhdsfdsfdsfdfdsdsfsdfdsdsdsfsddsdsdfsdfsddsfsfsddsfdsdedsfssdfhhhhhhhhhhhhhhhhhhhhkjhejwqrhjwhj ewjrhewjkrjew ewjhrjewjwke \n qwjkhrjkwerehw \n jkehrkjewhrjkew\njqhrkjhejwqrhjwhj ewjrhewjkrjew ewjhrjewjwke \n qwjkhrjkwerehw \n jkehrkjewhrjkew\njqhrkjhejwqrhjwhj ewjrhewjkrjew ewjhrjewjwke \n qwjkhrjkwerehw \n jkehrkjewhrjkew\njqhrkjhejwqrhjwhj ewjrhewjkrjew ewjhrjewjwke \n qwjkhrjkwerehw \n jkehrkjewhrjkew\n jqhrkjhejwqrhjwhj ewjrhewjkrjew ewjhrjewjwke \n qwjkhrjkwerehw \n jkehrkjewhrjkew\n jqhrkjhejwqrhjwhj ewjrhewjkrjew ewjhrjewjwke \n qwjkhrjkwerehw \n jkehrkjewhrjkew\n jqhrkjhejwqrhjwhj ewjrhewjkrjew ewjhrjewjwke \n qwjkhrjkwerehw \n jkehrkjewhrjkew\n "));
>>
>>label1.setWrapText(true);
>> label1.setPrefWidth(480);
>>label1.setMaxWidth(480);
>>layout.getChildren().add(
makeSelectable(label1)
);>> Scene scene = new Scene(layout);
>>stage.setScene(scene);
stage.show();
/** @return the passed in label made selectable. */
private Label makeSelectable(Label label) {
StackPane textStack = new StackPane();
TextArea textField = new TextArea(label.getText());>>
>> textField.setEditable(false);
textField.setWrapText(true);
textField.setStyle(
" -fx-background-color: transparent; -fx-background-insets: 0; -fx-background-radius: 0;"
);>>
>>
// the invisible label is a hack to get the textField to size like a label.
Label invisibleLabel = new Label();
invisibleLabel.textProperty().bind(label.textProperty());
invisibleLabel.setVisible(false);
>> textStack.getChildren().addAll(invisibleLabel, textField);
label.textProperty().bindBidirectional(textField.textProperty());
label.setGraphic(textStack);
label.setContentDisplay(ContentDisplay.GRAPHIC_ONLY);
return label;
public static void main(String[] args) {>> Application.launch(args);
>> }
}The issue I am facing is that with text area, the scroll bar is visible, which does not go with label. The label is being selected properly, but how to remove the scroll bar?
Edited by: Amrita Dasgupta on Mar 11, 2012 11:38 PM

DVD SP is not Flash or Director and it sounds like you using "hotpots" are thinking more along those lines. If someone puts the DVD in a DVD Player they may get rather frustrated having buttons that do not do anything and the navgation is strange
Also take a look here for some more pitfalls and why another app may be better for you
http://discussions.apple.com/thread.jspa?messageID=1085629

"Are you sure you want to shut down your computer?" prompt pops up for no reason and continues to pop up after selecting Cancel. How can I stop this?

"Are you sure you want to shut down your computer?" prompt pops up for no reason and continues to pop up after selecting Cancel. How can I stop this?
Mac Pro. OS 10.6.8

Then I suggest you read this thread regarding the 30" Apple Cinema Display and that particular message pop up... several possible causes... common denominator, the display.
http://forums.macrumors.com/showthread.php?t=617367

I have poor/no service on my iphone 6 in places that I do have service on my old iphone 5. Takes 10 minutes to send text and webpages will not load but load within seconds on the iphone 5 and forget making a phone call. How do i resolve this issue??

I have poor/no service on my iphone 6 in places that I do have service on my old iphone 5. Takes 10 minutes to send text and webpages will not load but load within seconds on the iphone 5 and forget making a phone call. How do i resolve this issue??

Hey kristiac,
Thanks for the question. If I understand correctly, you have no service on the iPhone. I would recommend that you read this article, it may be able to help the issue.
If you can't connect to a cellular network or cellular data - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario

My iphone took all of my pics off of my computer. this is making it very slow. How do I remove them if the only options are places or albums?

Hello,
I accidently hit restore on my phone and erased everything. When I called Apple they helped me retrieve everything from my computer and more. I now have over 4,000
pics on my phone that were on my computer, which is making it very slow. How do I get these off when the only options the phone is giving me are places and albums

To Remove Photos from your Phone you need to Sync your phone with the Computer you Usually Sync with...
See Here for Syncing...
http://support.apple.com/kb/HT1386
From Here
http://www.apple.com/support/iphone/syncing/
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

My MacBook Air lost mac os x. So I would like to reinstall mac os. But I can't select the disk to install mac os x. Only Recovery HD is shown and I can't select it. How can I reinstall my Mac os x.

My MacBook Air lost mac os x. So I would like to reinstall mac os. But I can't select the disk to install mac os x. Only Recovery HD is shown and I can't select it. How can I reinstall my Mac os x? Thank you!

you can download the mac os x recovery hd and run the setup to a flash drive using another mac computer running os x 10.7,(so that while installation the os x setup can varify your computer's serial no. and provide you the installation setup through internet)
or the time machine backup(if you have)
Now boot through the flash drive and follow the steps to install mac os x
here is the link to download the recovery hd for flash drive
http://support.apple.com/kb/DL1433
see this before you download
http://www.apple.com/macosx/recovery/

Pnp selection screen 000 how to put default values

Hello everybody,
my question today is about PNP selection screen 000: How can i put default values in the fields w/o using variant.
or can i restrict the numbers of values returned by " get pernr" with conditions not on selection screens.
thank you in advance!
Eric.

use this code to default fields on the event INITIALIZATION. you can modify as per you needs..
*----------------------------- INITIALISATION -------------------------------------------
INITIALIZATION.
pnpstat1-low = '0'.APPEND pnpstat1.
pnpstat2-low = '3'. APPEND pnpstat2.
pnptimed = 'I'.
* Default Dates
CONCATENATE sy-datum+0(4) '0101' INTO pnpbegda.
CONCATENATE sy-datum+0(4) '1231' INTO pnpendda.

What is a Selection Screen and how to make it ?

What is a Selection Screen and how to make it ? Please explain the process.
Best regards,
Ryan

Selection Screen are used for the program reports. These allows you to input some values that are required to show the desired output.
for example : you want to show the list of sales orders between 1000 to 1999, you would write a select query as this (to make u understand better)
select vbeln from vbak into it_vbeln
             where vbeln GE 1000 " greater than or equal to
               and vbeln LE 1999. " less than or equal to
now if you wnat to do it dynamically, you need a selection screen
tables : vbak. " declaration
selection-screen : begin of block block1 with frame title text-003.
select-options : so_vbeln for vbak-vbeln. " selection range from __ to __
selection-screen : end of block block1.
now you can write the same select query as
select vbeln from vbak into it_vbeln
             where vbeln in so_vbeln.
Hope this is clear now
Regards
Gopi

TS1702 My iMessage is only allowing me to select messages to be sent and received from my email. If my number is an option, but it will not let me select my number, how do I get the iMessages to be sent to my number and not my email?

My iMessage is only allowing me to select messages to be sent and received from my email. If my number is an option, but it will not let me select my number, how do I get the iMessages to be sent to my number and not my email?

Try ejecting your iphone from iTunes and then close iTunes. Now retry. Hope this helps.

My Lightroom 5 brushes tool has stopped working. You can select a brush but when you go to the picture the dot that shows it is being used does not come up and the photo does not change....

I use the brush tool a lot... When I use to use it I would select the brush then select the brush tool I wanted to use like Iris Enhance. I then would go to the picture and click on the eye. A dot would appear to show me I was using the tool. Then I could edit... No dot appears now and nothing changes on the picture.. My assumption is something changed that needs to be changed back,,,,, PLEASE HELP!!

ok now When I select a tool to use the brush with the dot shows up... When I highlight the area I want to adjust it shows pink... then when i hit done the pink goes away and no changes have been made....

After playing the song I selected in iTunes 11 it jumps to the another album rather than playing the next song on the original album I selected. ***? How do I fix this?!?!?

After playing the song I selected in iTunes 11 it jumps to the another album rather than playing the next song on the original album I selected. ***? How do I fix this?!?!?

I found that clearing the "Up Next" list fixes the problem. But I have to clear that list everytime I just want to hear just that one album. Each time I select on song on the album, the "Up Next" list builds it's own list rather than just play through the album. I think this has something to do with the issue. How can I fix this?!?!

HT204216 Used to highlight just the portion of an article that I wanted to print and press print selection only. How do you do that with a MAC?

Used to highlight just the portion of an article that I wanted to print and press print selection only. How do you do that with a MAC?

Depends to some extent what application you're printing from, and what printer you're using, but here's the dialogue box for ⌘P in Firefox -
Note the option to print selection only.
Haven't looked before, but I can't find anything similar in Pages print options.
It does appear in Word though.
Message was edited by: noondaywitch

Photoshop CS 6 - image -canvas - make double matt - select color - if I select wrong color, how do I change to a new color, right now it won't change to the new color I select, WHY?????

Photoshop CS 6 - image -canvas - make double matte - select color - if I select wrong color, how do I change to a new color, right now it won't change to the new color I select, WHY?????

Hi, The options bar shows sample size 101 by 101 Average. That was my problem. When I was troubleshooting in order to try to explain to you what was happening, I noticed that when I sampled my models teeth, it gave me a color a bit lighter than her lipstick as my foreground color in my tool box. That started me thinking in the correct way. I didn't realize that my sample size had somehow gotten switched from point sample to 101 by 101 average. I appreciate the help. Thank you.

The output of a select is boolean,how do i display it on the graph,its datatype being different?

the output of a select is boolean,how do i display it on the graph,its datatype being different?
Attachments:
comp.vi ‏37 KB

If you want to graph TRUE/FALSE in a graph, you can translate it to 1/0, using "Boolean to 0/1" inside boolean palette.
Hope this helps

Making a selection of brushes. HOW?

Similar Messages

Maybe you are looking for