Making a video or playing videos is not possible
I have a Problem with my camara on i phone 4
it is not possible to make videos or play videos, taken before.
problems also with youtube app.
thx for help
Now also problems with the Microphone an speaker.
No sound when calling another person or playing games.
Any ideas?
Thx
Similar Messages
-
Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app
I am back with an update. I turned off Match on both the ipad and the iphone 5. By doing so I was able to sync my Iphone and ipad to itunes and store the music on my devices rather than the slow streaming. So far this has fixed my problems with the iphone I have all my music, playlist, most of the album art and so on. But the ipad is a different story. I have the music and artist but not one playlist I am sure Apple will have an upgrade soon that will address these issues they are usually very good about this.
Now have any of you experienced another problem that has existed as long as I have used faces in Aperture.
I have over 200 faces and they are organized a-z problem is I have this going on A-Z folowed by a few that start over A-Z followed by another few A-Z and again a 4th time A-Z. Imagine how difficult it is while I am showing someone the great features of my iphone, ipad and imac. Which I do talk highly of all the time. But how do I explain that even though their name starts with a or b or what ever they are not important enough to me to be in the first list of A-Z or even the 2nd or 3rd list of A-Z someohow they are in the 4th section of the list!!!!
I have managed to get the Imac to fix this but for some reason the IOS devices do not. Any ideas?
Thanks Al -
Videos do play but are not loading properly and plays choppy.
Videos on websites as www.omesakevideo.nl do play but are not loading properly and plays choppy, I don't have this problem in Safari or Chrome
Try the basics from the manual:
restart.
reset.
restore.
iPod touch User Guide (For iOS 4.3 Software) -
2 MP4 Videos one plays one does not
I have two MP4 Videos one playes and one does not. Both are h.264 Baseline profile, Level 3, AAC 2 channel audio
Every transcode of the movie that will not play fails also. Any help on h.264 setting that Media Manager will take.I have two MP4 Videos one playes and one does not. Both are h.264 Baseline profile, Level 3, AAC 2 channel audio
Every transcode of the movie that will not play fails also. Any help on h.264 setting that Media Manager will take. -
How could we play all music videos within the music folder in the iPad2 ? In other words, select all, choose random, and click play and all music videos will automatically play upon completion of the one been viewed without the user having to deselect another video manually (annoying interrupt).
Currently you have to choose each music video and upon completion choose the next one manually. That defeats the whole concept of a music video library.
This does not happen on previous iPad or MacBook Pro iTunes!!!!!
Very annoying.
Thanks,
WMRYou can try leaving feedback : http://www.apple.com/feedback/ipad.html
-
1280x720 mp4 videos stop playing video after 9.1 update, only sound works
After upgrading to 9.1, 1280x720 mp4 videos won't play video anymore, only sound. Any help?
I am having a similar problem with videos. After an update, some of my video files play and others do not. They are all in mpeg-4 video format so I don't know that is the difference except the videos that are not playing are larger files of movies. The shorter videos play fine. Any ideas? My quicktime is up to date and I'm using iTunes 9.1. Before updates I was able to view the videos without a problem.
I am guessing that because of the size of the videos...mine are 640x352 that does not play but 480x320 will play -
Video autoplay and audio autoplay not possible simultaneously?
Hi,
I've got a article with a video set to autoplay immediatly and a audio set to play immediatly.
But when audio starts video stopps playing. Is this expected behaviour¿
v31 IOS8
Thx in advance
HansYes, that's expected behavior. Playing a media clip stops any other media clip.
-
My 30 GB video ipod plays video but they have no audio
i have a 30 gb video ipod and the videos i put on it do not play audio i have used the mpeg4 streamclip and it still doesnt work please help me
You can use itunes convert mov and mpg to mpeg-4. One thing though, is that if you convert an mpg (mpeg-1 or mpeg-2) muxed (muxed means that the video and audio are put together on one single track) than you loose the video or sound when converting them to mpeg-4 from itunes. If your videos are muxed you must find another video converter on the web. You can find out if the original video that you are trying to convert for the ipod is muxed by opening the original video in quicktime and then click on the Window menu then click on Show Movie Info this will show you if the file is muxed.
-
1280x720 mp4 videos stop playing video after update, only sound works
this is what appears in the inspector:
h264, 1280QTKitMultiplicationSignWithSpaces720, Milhões
AAC, Estéreo (L R), 48,000 kHz
Only sound, no video anymore. It worked fine until the 9.1 iTunes update. Now I can only see the video with the VLC player.
I have another one that works fine(both sound and video) :
H.264, 960QTKitMultiplicationSignWithSpaces540, Milhões
AAC, Estéreo (L R), 44,100 kHzAny help ? Thank you in advance. This happened after iTunes update.
-
Music videos - music plays, video doesn't
I purchased a music video. I can watch and hear it on my pc but can only hear it on my ipod and iphone. Can anyone tell what I did wrong or must do to correct the problem. Other music videos work fine on all three.
Thank you in advance.
H8crooksProblem explained and resolved. Thank you for your help.
-
Classic and nano video's playing video's from other companies docks.
I truly dont understand why apple have supported all of these other companies who have made accessories for apple products like the i-pod and then all of a sudden with the new range disable this and make many of these devices unusable. Their own dock is fine I suppose but the remote that comes worth it is totally useless.
You cannot peruse the menu's and your various playlists and you know have to get of of your *** to do this!. What is the point of a remote if you still have to get up????
I dont mind having to get a new dock and cable but I expect to have full use of my i-pod like I did with my Onkyo DS-A2.
As someone who has three i-macs and 5 i-pods in my home you can guess I am a bit of a fan, when however they start annoying me with this nonsense then it will be even more so for the more casual apple user.
You really have to get this sorted apple or this could bite you in the ***, they have to make the i-pod software backwards compatible with other companies accessories.I agree wholeheartedly - in the next month I shall be buying a new home-computer - up until last week this was without doubt going to be the new iMac - now it is probably going to be a VAIO or similar - the likelihood of being a new iMac is absolutely minimal. This is wholly based on the experience with having had Apple render many of my accessories and most importantly to me the various car interfaces that I have, useless and incapable of working as they did before
-
AIR 3.7 Android 4.3 - Play Store Install not possible
Hi,
this is just to inform people with AIR 3.7 Android Apps at the Google Play Store.
We have an App at the Google Play Store which was compiled with AIR 3.7.
This App was running fine till updating a Device to Android 4.3.
Now this App can NOT be installed anymore via the Google Play Store.
The error is: Package is not signed correct.
We will now compile the App with AIR 3.8 and resubmit it or is there anything else we can do?
Best regards,
RomanPahup thank you for the quick reply.
I have not tested on a 4.3 device (do not have access to one yet), but I did test on a 4.0 device and everything worked well.
The quotes I posted are just on version 2.0.2 which was built with 3.7.0.209. There were a few complaints on the previous version 2.0.0 which was built with 3.7.0.1860, but not as many.
I am able to install the app both from Google Play and by downloading it off DropBox and allowing foreign files to install on my devices, it works great on all my test devices but some users, most of whom are not running 4.3, are having issues.
Previous to 2.0.0 the app was probably built with 3.6, it has been a while since the update before 2.0.0.
The paid app is also running 3.7.0.209. I got excited and update both apps yesterday and both are having similar issues, less comments on the paid one because less users obviously. I am now rolling out 2.0.3 update for the free app which uses 3.8.0.1040 if that fixes the issues I will update the paid one as well, if not then I am rolling it back to 3.7.0.1860. I don't like exprimenting on live users for obvious reasons, app has over 5 million downloads so it is a good sampling if nothing else. -
Some of my videos in iPhoto won't open or can't be transferred to Facebook. What's wrong? I'm all updated to Mavericks, which may be the issue. A few days ago I tried to open my videos in iMovie and they worked. Now they don't appear in iMovie at all, even when I try to make a new event. I can currently play all but one video in iPhoto but can't move any of them to Facebook or iMovie.
Installed quicktime update 7. That partially fixed the problem. The videos will play but will not expand open. Can't figure out how to remove the quicktime 10 as mentioned in other communities.
-
"Making multicam sequence from 3 other sequences" not showing video properly
Well, problem in a nutshell. I created a multicam sequence, using 3 other sequences. But somehow, it's not showing it 100% correctly. Like, the main window shows the video, like it should be, and the smaller windows, are just off sync for some reason (except the only sequence that doesn't have any empty caps on it). Any explanation & fix for this?
Instant workaround that I just invented. I put some empty title on the empty caps, and now It shows it, like it should be in the smaller windows. But if anybody knows why it did it in the first place, would be clad to know.OK, maybe I should clarify...
Only A2 is coming through, NOT A1 -- so that's inconsistent with what you're saying. I have not checked Audio Follows Video, because that's not the bahvior I want. I'd like to be able to choose from any of the video tracks. Is that not possible in Premiere Pro?
Also, do you think it makes a difference that I'm 'multicam editing' from a regular sequence (with multicam enabled) as opposed to an actual multicam sequence?
thanks for the help. -
i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear again. how do i get my video to play clear and not fuzzy?
Same reply.
Maybe you are looking for
-
How to read the check box value in alv report
hi experts, i m working on one alv report where i m using the check box for field selection in alv display. but i don't know how to read the only selected fields. wa_fieldcat-fieldname = 'BOX'. wa_fieldcat-tabname = 'IT_HEADER'. wa_fieldcat-selte
-
can anyone help me with my apps on my itunes. They have separated for some reason. I have one section of 44 apps and the other has 121 apps. Only the top section will sinc with my ipod because at the side where it says apps, it is only showing the
-
Can somone tell me what the use of Dictionary is?
I am learning from the ADobe Flex store project and they use a dictionary but i have no idea what the point of using such thing is, i read the reference document and it doesn't really explain? is it to basically check if the data is absolutely correc
-
ERROR MESSAGE - "no applications are set up or enabled for synchronization blackberry"
I own a BB Bold 9700 and have recently changed laptop using Windows 7 64 bit and Outlook 2010. Since upgrading to the new desktop software I am unable to sync my BB. I have gone through the configuration settings, but no tick marks appear having con
-
MD73 : Display / Change PIR / SO
Hi, We are using SAP 4.7C version of SAP. when we check the MD73 total req plainning with Assignment option 3: 1. when we go with selection of single material: it shows assignment of Sales order to PIR. we can display / change PIR or sales order from