Making A Xterm Use All Of The Screen In RatPoison
After asking for some suggestions, I just gave RatPoison a try and I really like it. I do have a quick question that I hope someone will be able to help me with.
When I run an Xterm, I can still see some of the background on the right and the bottom, like this:
Is there a way to make this not happen? Or at least center perfectly on the screen?
By the way, is it a bad idea to change the key bindings for switching windows in RatPoison? I am so used to ALT-Tab that I am struggling.
Thank you in advance!
As far as I remember it's a combination of your font size and the windows gravity. And as far as alt-tab goes, not at all. That's actually the way I've got mine setup. Alt-tab goes one way, and (whatever the name of that windows key is)-tab goes the other.
Similar Messages
-
3 years ago I bought an IMac Desktop that I am using for a lot of things but the most important for dvd montage in Imovies and Idvd.
Now today when I opened my computer I get as usual the white screen with the Apple symbol but there were all over the screen vertical lines with green pixels and after a while the screen gets grey and I get message to restart my computer using the power button or the restart button and when I do so each time the same is happening somebody can tell me what is happening and what caused this. This computer is my work and now I have no income anymore.
On the Apple support site they are asking to enter the serial number and when I do so I get message it is wrong but it is the only one I have and I buy this computer in Cairo Egypt. I am living in Hurghada in Egypt for the moment. When I call the technical support of the shop where I buy it they are telling me that it is the hard disk or ram and that I probably lost everything on it and they are asking a big amount to repair.
Can somebody advise me on this matter. Thanks in advanceYou can find the serial number either in About this Mc in the Menu bar under the , or it should be on a sticker under the foot of the machine.
If you have the install discs, try booting from them, holding down the c key and then using Disk Utility to check the drive.
You can also boot into Safe mode
To start up into Safe Mode (to "Safe Boot"), do this:
1. Be sure the computer is shut down.
2. Press the power button.
3. Immediately after you hear the startup tone, press and hold the Shift key.
Tip: The Shift key should be held as soon as possible after the startup tone but not before.
4. Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
Please post back with results,
To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup. -
I was watching Netflix and all of a sudden, blue stripes appeared in my screen. Then my page seemed to "split" in two and then come back to normal and then there were pink stripes all over the screen and I couldn't see anything else but stripes. I had to restart with the button. It restart correctly, I have been able to watch Netflix again but only on Chrome because on safari it would happen again everytime. Then, iPhoto opened and here we are again, stripes and image "moving", can't help but wait... Then the screen became all white and nothing. I tried to restart it again with the button, but it didn't even made it to the apple interface, juste the sound and then white screen. What is going on, Please? I really need my computer for work this isn't fun!
After all this, you are at a white screen at startup and that is as far as it goes? What operating system are you using?http://www.macworld.com/article/2018853/when-good-macs-go-bad-steps-to-take-when -your-mac-wont- Also try this. https://support.apple.com/en-us/HT201295
-
Programs open up scattered all over the screen...can this be changed?
I am new to a MAC as I recently go a 27" iMac. I am loving it, but finding some of the functions sort of odd. I have searched and searched for an answer, but have gotten noplace. I thought I would sign up here it looks like a great resource. I was also hoping someone could answer this for me:
Do all mac programs open up scattered all over the screen? I was always used to a program opening and it was clear where the entire window was. On my mac, if I open, say Photoshop, the tools panel is along one side, then there is no canvas, but the layers panel, or others I have open will be somewhere on the right side. When multiple programs are open, it is really hard to tell which program I am currently in as it seems so messy. All the programs seem to open this way. Is this a feature that can be turned off, or is this simply the way it is?
I am not sure if I explained this very well, but somehow I would like to be able to clearly see which program I am in, rather than have bits and pieces of the program randomly placed on the screen with no definite boundaries to tell me where the program ends. Maybe it has something to do with having such a large screen?
Any help you could offer would be greatly appreciated! Thank you in advance.Upper, left-hand corner of your menu bar, next to the Apple icon, lists the current, application that has focus.
Since you're new, see:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac 101: Mac Essentials,
Mac OS X keyboard shortcuts,
Anatomy of a Mac,
MacTips, and
Switching to the Mac: The Missing Manual, Snow Leopard Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac. -
I misplaced my ipad, so I remotely erased it. Then I found it, but now I cannot use all of the options in the settings. I have restored from backup, but it still is not letting me use all functionality. Help!
Would throwing it in Recovery mode and restoring as new clear it up?
(same for Ipad)
Step 1: Turn off the iPhone. To do this press and hold the power button till you see the “Slide to Power off” screen. Now slide the button to turn it off.
In case your iPhone is stuck in an infinite loop and the previous option is unavailable, press and hold the Power and Home button till the screen goes off. Remember to leave both the buttons as soon as the screen goes off and before the Apple logo appears again.
Step 2: Connect the iPhone’s USB cable to your computer but not to your iPhone yet.
Step 3: Now hold down the Home button and while you are holding it connect the USB cable. Keep holding the Home button till you see the Connect to iTunes screen on your iPhone(Screenshot shown below). iTunes will show an alert saying a device in recovery mode has been detected.
Here’s what your iPhone screen will look like once its in the iPhone Recovery Mode.
Read more: http://www.callingallgeeks.org/15018/how-to-put-iphone-or-ipod-touch-into-recove ry-mode/#ixzz296y04ygX
Under Creative Commons License: Attribution No Derivatives
THEN RESTORE THE DEVICE AND SETUP AS NEW. JUST YOU WILL HAVE TO DOWNLOAD YOUR APPS AGAIN(FREE) ETC....
LEAST THE SECURITY WORKS HAHA!!! I also wouldnt get upset, be thankful you found it. -
I was using my computer just as usual, I was on Microsoft Words and doing lectures on the Internet. Then, out of nowhere, the screen froze and black lines appeared all over the screen and the computer shut down. The screen was all black, but I think it was still open because my laptop was doing sounds, three beeps. When it beeps, the little light that shows you when your laptop is open is bright, so the beeps and the light are synchronized. AND I DON'T KNOW WHAT TO DO, help me!!!
There is a hardware problem. Possibly bad RAM. Please make a Genius Appointment and take it in for service.
-
My assistive touch will work all over the screen just not my touch screen. why is this?
The assistive touch button i can click on and drag it all around the screen... however i can not use the touch screen underneath, such as unlocking. Please someone help me! I have not dropped my phone or anything just the lock button stopped working so i have been using assistive touch for the last two weeks, with no problem until today! iPhone 5C
Try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restoring the iPod from backup
- Restoring the iPod to factery defaults/new iPod.
If iTunes does not see the iPod, try placing th iPod in recovery mode and then restoring. For recovery mode see.
iPhone and iPod touch: Unable to update or restore -
When typing, my letters go all over the screen, just happens with Firefox.
After installing Firefox, when I type, the letters go all over the screen, instead of where I try to type them. I used to type without looking at the screen. Now I have to watch... my cursor disappears, and the letters I'm typing go into something I've previously typed correctly.
== When I installed Firefox, and it happens constantly.Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."'' -
My screens keep jumping all over the screen and changing size while I am trying to work why?
My opened pages keep jumping all over the screen and changing sizes while I am trying to work - what is causing this?
Madafk wrote:
.... - I really love this Mac but it is taking a bit of getting use to
Cheers
You may find these Links helpful in enjoying your Mac...
http://www.apple.com/support/mac101/
http://www.apple.com/support/switch101/ Switching from PC
Find Out How (Video)
http://www.apple.com/findouthow/mac/ -
Pointer jumps all over the screen erratically on new MacPro Quad Core
I just powered up my new MacPro Quad Core Xeon for the first time today. For the monitor, my new Viewsonic VG2230. I noticed that my new mighty mouse was skipping all over the screen and it was hard to get the pointer on the place on the screen I wanted to click. It got much worse when I added the second monitor (Viewsonic VA1912), and didn't want to move across from one screen to another at first.
I thought maybe it was the mouse, and put on my old Razor Pro mouse, which I know and love. Same problems. I switch USB ports still the same.
According to Viewsonic, both monitors are compatible, and I have used the VA1912 successfully on my old PowerMac. I thought it was odd that the number of screens affected the problem, which is why I am concentrating on the monitors, but I wonder if it isn't a problem with my Mac.
Any ideas?Hello g:
Welcome to Apple discussions.
I suspect a faulty mouse. However, try two things first. Trash a preference file (com.apple.bluetooth.plist) and restart. Reset the PRAM:
http://support.apple.com/kb/HT1379
Second, after assuring Apple this really was a problem, i got the ultimate insult. "If you would like to lodge a technical support ticket, we will need your credit card. This call will cost you $150.00."
You see, I bought this thing four months ago. Apparently you only get a 90 day free call period. After that you're warranty is actually a cost per call scenario…..
There is no Apple charge for a warranty issue and the mouse has a one year warranty. Call Applecare back (or take it to a store if they have one close to you). Unless I am badly mistaken, Apple will replace the mouse and pay for shipping both ways (I had one fail a couple of years ago myself). Do identify the call as a warranty issue.
Barry -
Red horizontal lines appearing all over the screen accompanied with beeping
Today I had the weirdest of issues on my Macbook Pro (early-2011 13 inch core i5 hd 3000), while using Chrome, suddenly red horizontal lines appeared all over the screen with beeping sounds coming from the computer. I had to hard reset my macbook to make them go away. BTW I am on ML 10.8.2 and this is the second time I have had an issue after installing the updates, Digital Camera RAW update 4.04 and Airport utilitly 6.02. I have also installed the SMC update that was released earlier this month. A couple of days ago my macbook got stuck while shutting down and I had to close it manually and today this happened. Please tell me that this is not a hardware related issue because my warranty has expired
I ran the extended test and thankfully "No trouble was found" . Should I now report this to Apple Support, maybe there is a problem with the updates I have installed?
Here is the result of that test (the image uploading thingy inverted this image): -
When using my ipad air it keeps coming off the page I'm on or app I am using and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping sound and goes to the home screen. Could anyone help please. Thank you :-)
Read here:
http://help.apple.com/ipad/8/#/iPad9a245e3e -
I have a problem with Safari in IOS 8 on my iPad 3. The bookmarks take up a third of the screen and I can't seem to make the bookmarks disappear until I need them. The useful part of the screen is therefore very small. Any suggestions gratefully appreciated.
OK, it now sort of works. A couple of problems here:
After updating IOS, Safari iCloud was "automatically" switched off
Switching it on had no effect
resetting my iPad automatically switched off safari iCloud again
after switching it back on, it said "turning off safari data"
switched it off and on again, now it said : "turning on safari data" and the sync worked
On IOS 7 no problems
The bookmarks not being displayed was because after pressing the book icon, it defaulted to showing the history and I had to press "Back" to get to the other options -
I have a first generation iPad and the screen went completely green on me and locked up. I was able to unlock it, but now there's a green haze all over the screen. Anyone know what the issue could be and how I can get it fixed?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
Cheers, Tom -
When I search a music artist in the itunes store and then click to view all albums the screen is blank. Why is itunes store not showing me all of the Albums?
This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode
Maybe you are looking for
-
Design problem about repreatable entity relationships
Hi all! As I design the data model (let's name it the ERD, no matter the name is quite unfashonable), I have found almost identical structures of entities and relationships between them, but playing completely different roles in the semantics of the
-
Is it possible to "borrow" the processing power from a second mac
I have a G4 Laptop 1.25ghz which just doesn't quite offer enough processing power to do what I want in Garage Band. I've just purchased a mini 1.83 ghz duo and I'm wondering if it's possible to run garage band on my laptop and "borrow" processing pow
-
Printing to PDF adds printer margins
I have an extremely frustrating problem. I have a large Word doc with a full bleed border. I need to convert it to PDF for printing, but when I try, I get "the footer/margins in Section X are outside the printable area of the page." If I hit "ok," th
-
When I copy and paste from Word to my e-mail using Firefox it changes the font and spacing to single space and 10pt. It just started doing this a month ago. It does not do it when I am on my laptop or using Explorer. Help, I hate explorer.
-
Updating offercode(priority code) in campaign element
Hello, My requirement is to create Campagins and Campaign Elements from flat file through BAPIS. I have used BAPI MKT_ELEMENT_CREATE to create that. But in the attributes(IM_ATTRIBUTES) we dont have the offercode or the priority code field to be u