Making an editable copy of IRS Instruction worksheets

I want to make a PDF file out of a single page worksheet from IRS Instructions on Form 4562 and then turn that PDF file into an Excel or Word document from which I can add or remove text. Is that possible?

Hi, goof50.
Thanks for the question.
I found this PDF as the Form 4562 Instructions <<http://www.irs.gov/pub/irs-pdf/i4562.pdf>>. I assume what you're trying to do is create an editable Word or Excel version of Pages 20, 21 or 22? Can you confirm?
CreatePDF and ExportPDF will allow you to convert a PDF into an editable Word or Excel file. Currently it converts the entire PDF - you can't specify a single page or page range. That's a good idea which someone could add to our Ideas list <<http://forums.adobe.com/community/createpdf?view=idea#>>
Thanks.
Dave

Similar Messages

Is there any way to copy a photo with Lightroom adjustments without making a separate copy?

I do most of my printing from lightroom. I generally set up my image the way I want it for printing on photo paper, and then I make other copies and adjustments for printing on things like Canvas, coffee cups, tiles, etc.
The problem I have is I set up templates in photoshop, say for a coffee cup, which will have the correct dimensions, perhaps some text, etc. To get to the lightroom photo with the lightroom adjustments I have to "edit a copy with lightroom adjustments" in photoshop, then copy and paste the image to the template in photoshop. Now I have another copy of the image on my harddrive and in lightroom. So after I copy the image in photoshop, I close it go back to lightroom and delete the copy I just made. Besides the extra fragging on the harddrive this creates, I know I am setting myself to delete the wrong photo by accident through repetition, and it is extra work.
How can get a copy of a photo with Lightroom adjustments to the clipboard without making another physical copy of the photo?
Any suggestions would be appreciated.
Godspeed,
Bruce

I may not be the best resource for tiles and cups, I've just started printing to them. Basically I'm doing them using an epson printer with dye sublimation inks printing on transfer paper and then doing the transfer at 400 degrees with a press. I wanted to be able to do my own to get the cost down, and wanted to be able to make it actually usable, (dishwasher safe, etc) so this is the best route I've found. I had to get a new printer, 2 presses, a bulk ink system, and the supplies to print on so it is a pretty hefty up front expense. It can be done cheaper though using a mug wrap heated in an oven (not your cooking oven though). I worked with the folks at Conde to get set up, and they seem pretty good. But I'm still early in the learning curve, so I would be able to tell you a lot more in 6 months.

Why can I no longer copy a word or phrase from a New York Times article with a right-click? To copy I have to go to the toolbar Edit|Copy.

mouse right-click no longer allows me to select Copy of a word or phrase in a New York Times article. To copy I have to use the Firefox tool bar Edit|Copy.
== URL of affected sites ==
http://www.nytimes.com

One or more of your add-ons could be affecting the right-click function. You did not list your extensions. Type '''about:support''' in your URL/location bar to see a list of your Extensions, modified preferences and other Firefox information.
'''Safe Mode'''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Install/Update Adobe Flash Player for Firefox''': your ver. 10.0 r32; current ver. 10.1 r53 ('''important security update 2010-06-10''')
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer.
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''and'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

Making an editable PDF Form non-editable (a shortcut)

How to make a PDF form non-editable or locked.
For those who aren't script-savvy, I believe this may be a little shortcut to editing a PDF form and then saving and sending it as a non-editable or locked PDF.
This is what I have written out for my client, whom I provided an editable PDF Form, so they could edit the PDF and then send it out to their own respective clients as a NON-editable PDF.
Instructions as follows:
How to save your PDF Form into a separate non-editable PDF to send to your client: (Using Adobe Acrobat Professional)
Step 1. Fill out the original PDF Form
Step 2. Once finished, go to “File” menu and click “Save a Copy” - title the file appropriately and save it to the desktop.
Step 3. Close the editable PDF document and do not save it (Saving it will save over the original file). Now open up the PDF you’ve just saved to
                    the desktop (you’ll now take the steps to make this file only non-editable).
Step 4. In the top menu, go to “Advanced” then select in that drop down menu “Security” then “Show Security Properties” - a ‘Document Properties’ window will now appear.
Step 5. From this new window, select the “Security” Menu. Set your ‘Security Method’ to ‘Password Security’.
Step 6. A new window will appear named ‘Password Security Settings’. In this menu, tick the box that says “Restrict Editing & Printing of the document”
            you’ll need to a) set a password for it, and b) In the ‘Printing Allowed’ drop down box, select ‘high resolution’   and if you want to, tick the
            box that says ‘allow the copying of text, images and other content’
Step 7. Click OK and Save the document. Now it’s not editable unless you have the password.
Note: If you happen to want to edit the PDF at a later date, you can open the file and in the ‘Security settings’ menu on the left hand side
(the menu is represented as a little gold lock) click ‘Permission Details’ then ‘Change Settings’ to revert everything back to an editable document
- repeat the above steps to make it a locked document again.

Thanks for your suggestions. You should also consider flattening a form if you want a non-editable copy; because the permissions password is not always respected by third-party PDF applications (for some people the form will remain editable, depending on what software they're using).
Flattening a form can be done in several ways in Acrobat: you can run a script - this.flattenPages() - or print the PDF back to PDF (aka refrying), or use the Sanitize tool in Acrobat X. It also strips out hidden content associated with the form (button actions, field calculation scripts, etc.) so provides additional data protection. Sanitize is the heavy-duty option of the three; it will remove all hidden content, leaving only what you see on the page.
One correction to your workflow - the Save a Copy menu item is not intended for creating a duplicate of a normal form, it's only available if the form has been rights-extended and it serves to remove the extension certificate from the PDF (allowing full editing in Acrobat again). As your client is working in Acrobat they don't need a rights-extended version in the first place, and working with a normal form will make things simpler for them. In Acrobat X Pro you could create them a custom Action which automatically flattens the file and saves a duplicate, so they don't accidentally overwrite the original.

Forms 10G - Edit- Copy Diabled

Hi All,
Greetings!
Environment - Oracle Forms 10g
I have a wierd problem with EDIT->COPY option.
I query the screen having the cursor on a field, after the record is queried I invoke the Pop Up menu to copy the field, but the Copy option is disabled.
I even tried Edit Menu - >Copy...same thing.
But when I click on anyother field and click again this field then the COPY option is enabled.
Any solution for this wierd issue?? :-)
Thanks
Plato
Edited by: Plato on Mar 23, 2010 11:15 AM

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

CS-5 Crashes when Edit / copy are used for pasting a new selection

Good morning,
I have downloaded CS5-Extended onto my PC as an upgrade to elements premiere 8. I still have the entire elements suite on my PC and functioning. The PC is a new Dell 4 core with windows 7, six G of RAM, and lots of HD space.
CS-55 works fine but has one very serious problem that seems to be a regular (several tests produce the same result) occurrance.
Selecting "edit" then "copy" when a selection is completely ready for copy/paste to a new layer freezes the entire program. No controls will do anything to the program no matter how long or what buttons are pushed. The PC stil works however with other programs which surprises me (I'm very computer literate).
The only method that I can find to close and "fix" the problem with CS5 after a crash is to completely shut down the entire PC and force a shutdown at that time (to get the PC to log off and shut down).
The real difficulty now occurs on re-starting the PC. The system seems to completely fill RAM on a re-start which makes the entire PC slow and almost non-responsive. This took some experimenting to "figure out." Starting regular office programs (Word, excel, etc) takes very long, and I get an intermittent "program not responding" display during the program start.
When started, the program(s) are extremely sluggish, and mouse pointers are not linear movement but "bounce" from place to place on the screen.
I considered doing a system restore to place the system back to a state before CS5 installation, but did more experimenting before this (in order to preserve the downloaded trial version of CS5 before my (already purchased) box arrives in the mail.
When starting CS-5 (after a crash and restart), it takes over a minute to start and does not respond well at all once started. When trying to open the previous file then "closing all files" the system seems to "unlock" all RAM and places the entire PC back to normal function.
This is a continuous problem affecting my system and all stems from an "edit / copy" set of commands.
Please help with this one. This problem is obviously a serious one and cannot continue with my set up.
My e-mail address is [email protected].
Thanks for the help; any other information you need to help diagnose this situation for a repair.
regards,
Peter 1269

Chris,
Thanks for the fast response. In answer to your questions, I’m using the 64 bit version of the CS-5 software. I have not received any bad “news” or reports about “bad ram.” This from IOLO system mechanic 10, and windows performance itself.
Let me try task manager / performance both before any Photoshop use, and after a crash. I’ll also get some information from system mechanic and any other sources that I can come up with.
I’m not sure why this crash happens after an “edit / paste” sequence and (possibly) not anything else. I just did however find the program crash under these circumstances:
Photoshop running with a (7mg picture loaded). Turn on elements organizer with a 35,000 picture catalog that I’ve been using in elements 7 and 8 (and premiere 8 ). Turn off organizer and return to Photoshop only to find that Photoshop is now frozen with a dual vertical arrow instead of a mouse pointer. No action will recover the program at this point.
Question:
Will my “preferences” in photoshop set to a very high ram allowance affect crashes in the program? What other preferences settings might be causing a problem.
I can talk to Dell tech support if need be as this PC is only 4 months old.
Thanks for ongoing help,
Peter1269

While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this Iphone (-35) an error has occurred. Do you want to continue with altering this Iphone? When you continue al the material on this I

While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this iPhone (-35) an error has occurred. Do you want to continue with altering this Iphone? When you continue al the material on this Iphone will be lost.
I reinstalled iTunes but that dit not help. After synching iTunes with my iPhone it also asks to authorize my pc and when i Click on ok, it says it is already authorized.
Please can somebody help me, so I can make backup.
Greetz,
Derk

It's likely that your backup is corrupt. Try deleting the backup, then right click on the name of the phone in iTunes and choose "back up". To delete go to iTunes Preferences, Devices tab. Highlight and delete the most recent backup. Note that sometimes deleting this way leaves some garbage around that can still interfere with a new backup, so you should verify that the backup folder is empty.
from: http://support.apple.com/kb/HT4946
The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.

ITunes: I can no longer copy a playlist into a Pages (Word) document by using select all edit copy edit paste. Why won't this work now? All I get when I paste is a series of Speaker symbols.

I want to creat a copy of my playlists onto a Pages page. I selected all the entries in the playlist, then did Edit > Copy > Edit > Paste. I've done this lots of times before and it was fine; now when I paste all I get is a series of Speaker symbols, no text with of the playlist songs. Does anyone else have this problem? Thanks.

I want to creat a copy of my playlists onto a Pages page. I selected all the entries in the playlist, then did Edit > Copy > Edit > Paste. I've done this lots of times before and it was fine; now when I paste all I get is a series of Speaker symbols, no text with of the playlist songs. Does anyone else have this problem? Thanks.

I installed Photoshop CC (2014) yesterday through the Creative Cloud app. Now, when in Lightroom when I go to "edit in"and select Photoshop CC (2014) and click on "edit copy with Lightroom adjustments", it opens Photoshop CC (2014) but my photo doesn't s

I installed Photoshop CC (2014) yesterday through the Creative Cloud app. Now, when in Lightroom when I go to "edit in"and select Photoshop CC (2014) and click on "edit copy with Lightroom adjustments", it opens Photoshop CC (2014) but my photo doesn't show up? My photo does show up when I click on "edit copy" or "edit original".
How can I correct that so that I can open up a photo from Lightroom WITH the Lightroom adjustments? Thanks!

I'm having a similar problem, but only with jpg's. I have PS CS6, CC, and CC 2014. Other image file formats function normally with regard to the "open with" list. PS CC 2014 appears on the list. But with jpg's only PS CC appears on the "open with" list and 2014 can't be added by the browsing for it.
The curious thing is that if I have any of the three versions of Photoshop open, click on Photoshop CC in the "open with" list, the image opens in whatever version is already open on my computer. This is true of all image formats. No matter which version I pick from the "open with" list it opens in the currently running program. I use only the latest version so keeping it open all the time is an easy work around. I won't uninstall any of the earlier versions lest more file association quirks result. it would be nice to have this matter fixed.

Photoshop CS5/Lightroom 3 integration issue - "Edit Copy with Lightroom Adjustments" does not work

When clicking "Edit Copy with Lightoomroom Adjustments" from Lightroom, I get an error in Lightroom 3 complaining that the Camera Raw plug-in is not up to date; full message below.
"This version of Lightroom may require the Photoshop Camera Raw plug-in version 6.1 for full compatibility.
Camera Raw version 4.6 is the latest version available for Photoshop CS3. If raw file support for your camera was introduced after Camera Raw 4.6, the Photoshop integration features in Lightroom require Photoshop CS4 and the latest Camera Raw version 5 plug-in.
The version of Camera Raw plug-in currently installed is 0.0."
After I click "Open Anyways", Photoshop CS5 is initiated but it seems to have lost context of why it is opened and asks me what file I want to open (i.e. the Open As dialog).
"Edit Copy" and "Edit Original" from Lightroom 3 works as expected and opens images fine in Photoshop, CS5 however.
My installation is on Windows 7. I currently also have Lightroom 1.4 and Photoshop CS3 installed. Everything worked fine with the old configuration. I also tried the same workflow in Lightroom 1.4 again just now, which is now linked to CS5 instead of CS3. The "Edit Copy with Lightroom Adjustments" also work just fine.
Things that I have tried but do not worked:
I did an Update via the Help -> Update menu, and also manually downloaded the Camera Raw 6.1 plug-in.
Blew away the Photoshop preferences file
Made sure that Lightroom 3 points to Photoshop for editor
I'm thinking that I'll try uninstall CS3 next. Anyone else encountered this issue?

[CS5.1 (12.1) ACR 6.5RC / LR 3.5RC; MacbookPro 4gb Leopard 10.5.8 ] As a Lightroom instructor, up until now this has been a vexxing problem to explain to my students. Even if ACR in Photoshop is up to date (I just downloaded 6.5RC and installed the PS Plugin), I still get the error when attempting to edit from Lightroom 3.5RC. I deleted the PS prefs file to no avail. I was not willing to re-install Photoshop as a solution (per some blog's suggestion), although that might be the ultimate answer. But what an ordeal if so!
For a solution, I went back to a resolution I devised when I had a CS3 compatibility problem with LR3. I went into the Preferences of Lightroom and manually chose the Photoshop app as the "custom" image editor. I went back to edit the file in PS from Lightroom and the ACR error disappeared. Try it. Yes, this means you need to use the Custom editor as your image editor, but it seems to have resolved the issue.

How do i move a text edit copy(doc if u will) to Pages

how do i move a text edit copy(doc if u will) to Pages ?? thanx

…or Open it in TextEdit or equivalent, select all and copy/paste it into Pages
…or Drag the text across into Pages from TextEdit.
…or click in the text in Pages > Menu > Insert > Choose > browse to your txt or doc file
Peter

PSE9/Win 7: Edit/Copy does a Cut?

I'm running PSE 9 on Windows 7.
I must have forgotten how to do a copy/paste.
Here is what I did:
m - to select a rectangular area
Edit/Copy - to make a copy of the contents of the Selection
Click on the Move Tool.
When I start to move my selection I see that my original selection area is gone.
I've also tried doing a Ctrl+t after the Edit/Copy.
I get the same results. I can move my selection. But my original area is cut out.
My circumvention is to do a Ctrl-v after selecting the Move tool.
That seems to copy my selection back to where it started.
Then I can manipulate the copy.
Thanks for any help. I don't know how I managed to forget how to do this.

Copying the selection simply places it on the system Clipboard. That copy is unavailable for any purpose until it is pasted somewhere, as you found when doing Ctrl+V, or as 99jon described pasting it in on its own layer.
Ken

View files in Web browser only, restrict download/edit/copy/print

Can I use the IRM feature (to restrict edit/copy/print) along with Web Apps (to view the file in web browser only)?
Will this ensure restricted download?

try these links:
http://www.msexchange.org/blogs/patricio/get-news/irm-information-rights-management-features-and-limitations-using-office-web-apps-premise.html
http://searchwindowsserver.techtarget.com/tip/Protecting-SharePoint-2010-document-libraries-with-IRM
http://blogs.technet.com/b/office_web_apps_server_2013_support_blog/archive/2014/03/12/irm-information-rights-management-features-and-limitations-using-office-web-apps-on-premise.aspx
http://blogs.office.com/2012/11/09/whats-new-with-information-rights-management-in-sharepoint-and-sharepoint-online/
https://support.office.com/en-in/article/Apply-Information-Rights-Management-to-a-list-or-library-853f009c-1cc3-4e57-8260-48c80837f506

Q10, problem with making a Security Copy

Two weeks ago, I haven't been able to make a Security Copy. A frame with "An error has been produced while making a security copy" (translated from Spanish) appears every time I try to make one.
It also says "It might have occurred a problem with the smartphone or the connection during the security copy. Verify that the smartphone is turned-on and is connected".
CAN YOU PLEASE HELP ME???
Thanks. Regards,
J

Are you Spanish speaking?
Estimado Usuario, lamentablemente este foro es solo para el idioma Ingles, sin embargo lo podemos ayudar en el foro especializado en Español, esta es la dirección donde gustosamente lo podemos atender:
http://foros.blackberry.com/t5/Foros-de-Soporte-General/ct-p/bscf_es
Muchas gracias
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Edit query results in SQL worksheet

I can't edit query results in SQL worksheet, I not found any options to "ON" this. I use SQL Developer 2.1.1.64.

You can't edit results in the worksheet. It's an accepted feature request with no scheduled date. In the mean time you have to go to the table or write an update statement.

Making an editable copy of IRS Instruction worksheets

Similar Messages

Maybe you are looking for