Making calculations in QueryDesigner using only two decimals

Hi,
I need to make a calculation in a bex analyzer query, using only two decimals.
Ex.
A = 10
B = 3
C = 1000
D is a variable.
In a query, the following calculation: A/B = D | D*1000
Results in the following: 3333
But if D only had two decimals, the result would end up as = 3330.
I know I can control the number of decimals <u>shown</u> using properties, but this won't change the number of decimals actually used for the calculation.
Anyone got an idea ?
-Tone

Tonni!!
if 3333 if you put two decimal place it will put 3333.00 but not rounding, if you need rounding then that is different, 3333.51 will be rounded to either to 3333.00 or 3334.00
thanks.
Wond

Similar Messages

I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you have too many live channels

I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?

Quote from: Richard on 15-November-07, 20:33:05
tornado2003,
What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
After that boot normally and install the latest nVidia ForceWare Drivers
Take Care,
Richard
i guess you missed that:
Quote from: tornado2003 on 15-November-07, 17:26:52
ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd)

Is possible to work with more than two decimals

Hi,
my CRM OD environment shows only two decimals, but the customer needs four decimals. Is possible these change? How can I do it?
Regards.

Hello Gayathri,
The version is OBISE1 10.1.3.2.1
The scenario is the following:
I have two connection pools
- One is mapping the DWH and it is using the System's variables :USER and :PASSWORD. Then I have an Initialization Block that get these values and I have created the logins as users in the database.
- The other is mapping the DWH tables.
I want to create directly users into the repository. The problem is the users of the repository cann't do the login because the first connection pool is trying to validate then against the database.
Would be possible to validate the users against the connection pool and the repository simultaneously?
Thank you and regards,
Mónica.

HT204053 i RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

I RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

I have a annual plan, it supposed must be used in two terminals, but i haven´t been able to install any app in a second computer, it always says that the app is only available as a trial download. What can I do to solve this issue, and be able to use my p

I have a annual plan, it supposed must be used in two terminals, but i haven´t been able to install any app in a second computer, it always says that the app is only available as a trial download. What can I do to solve this issue, and be able to use my paid plan in two computers?

Hi Susan,
Please refer to the help document to fix this issue:
Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
You may also refer to the thread as below:
creative cloud software says my free trial has expired, but I have a paid subscription
Regards,
Sheena

I have registered on my PC two devices iPhone 5 and iPod Touch 4 now I am using only the iPhone 5. I have two different apple ID`s and yesterday I have FB update and from app store wanted to sign in with the ID form iPod Touch 4 how to fix it?

I have registered on my PC two devices iPhone 5 and iPod Touch 4 now I am using only the iPhone 5. I have two different apple ID`s and yesterday I have FB update and from app store wanted to sign in with the ID form iPod Touch 4 how to fix it? I want to use my current Apple ID not the old one. Regards!

Try this
http://support.apple.com/kb/ht1495
Hope it helps.

I have 2 Adobe CC subscription plan under same adobe ID, but i only can manage to used on two computers. How can I activate another the second plan.

I have 2 Adobe CC subscription plan under same adobe ID, but i only can manage to used on two computers. How can I activate another the second plan.

Hi AndrewHISC
We would need to cancel one of the subscriptions and then you could sign up again using another ID.
Let me know if you wish to proceed with this.
Kind regards
Bev

ITunes is saying that I have over 4.78 GB under the category of "other", making it so my iPhone 4 can't add any data (music, apps, pictures, etc.). I'm currently using only 1.3 GB of storage on my iPhone, and the rest is "other". How do I fix this?

iTunes is saying that I have over 4.78 GB under the category of "other", making it so my iPhone 4 can't add any data (music, apps, pictures, etc.). I'm currently using only 1.3 GB of storage on my iPhone, and the rest is "other". How do I fix this?

Not if you sync your contact to itunes using the program provide i.e outlook..etc

I'm using firefox 6.0.2 It's making problem with Bangla font ONLY on FACEBOOK others bangli website FORNT SIZE are OK. On the FACEBOOK it shows Bangla font in a very / Too small! I change font SIZE in firefox setting but i can't solve. Pls HELP me

I'm using firefox 6.0.2 It's making problem with Bangla font ONLY on FACEBOOK others bangli website FORNT SIZE are OK. On the FACEBOOK it shows Bangla font in a very / Too small! I change font SIZE in firefox setting but i can't solve. Pls HELP me ..

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

When I use messaging there are only two users who automatically go green (MMS?), and are undeliverable. I can't seem to change this. What am I doing wrong?

When I use messaging there are only two users who automatically go green (MMS?), and are undeliverable. I can't seem to change this. What am I doing wrong?

I use message and all other messages are non-sms. When I try to message these two accounts, they automatically use sms, everything I do is the same. The non-sms messages go through just fine (including pictures). The sms messages (no pictures) are always rejected; they have never gone through. They have never been able to send messages to me either (although they can send to others). I have a Verizon cellular data plan.

My iPad suddenly started to show crazy colors. I turned it off and had to use the two button trick to turn it back on. Now it shows only green stripes for a few seconds and goes back to sleep.

My iPad suddenly started to show crazy colors. I turned it off. It would not reboot until I used the two-button reboot. Now it shows only green stripes. only for a few seconds and goes back to sleep. HELP!

Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if, it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove all apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Tap and hold any icon in this list until they wiggle
- Press the red to delete all apps from this list.
- Press the home button twice when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

I have a Mac OS X Snow Leopard. For some unknown reason the Library application in Finder disappeared and I was using it only two days ago. Please could someone help? Thanks.

I have a Mac OS X Snow Leopard. For some unknown reason the Library application in Finder disappeared and I was using it only two days ago. Please could someone help? Thanks.

Hi cb-anc! Thank you for replying to my question. The Library application has disappeared,not the library folder. I went into the application a couple of days ago to trash some plist files and now the application has disappeared. I haven't upgraded to Lion but am still on now Leopard.

Hello i want to learn that if i buy adobe can i use it two of my computers or only which one i buy it from ?

hello i want to learn that if i buy adobe can i use it two of my computers or only which one i buy it from ? pls answer it,waiting to buy it

For example you can activate on your home computer and another that you use for travel or work. You cannot let someone use that second computer at the same time you are using the first.

Only two events catching

Hi All!
I'm an absolute beginner in making programs to SBO.
I wrote any little trial program in VB6 (and Delphi5), but I have a problem the events handling (of course...).
By the samples I use the code as below:
Private Sub SBO_Application_ItemEvent(ByVal FormUID As String, pVal As SAPbouiCOM.IItemEvent, BubbleEvent As Boolean)
    If pVal.FormType <> 0 Then
        Select Case pVal.EventType
            Case et_ITEM_PRESSED:
                SBO_Application.MessageBox ...
            Case et_KEY_DOWN:
                SBO_Application.MessageBox ...
            Case et_GOT_FOCUS:
                SBO_Application.MessageBox ...
            Case et_FORM_LOAD:
                SBO_Application.MessageBox ...
            Case etc...
        End Select
    End If
End Sub
Every time only two event catching: et_GOT_FOCUS and et_FORM_LOAD after the start, and not others.
How can I get to catch the et_ITEM_PRESSED (there is a button on the form), etc. event?
(Note1: This programs not registered as add-on.)
(Note2: We have not yet SDK, the media is coming soon.)
Best regards
Gabor
PS.: Sorry my terrible english!

Gabor,
the program needs to be registered with SBO, otherwise SBO cannot hand over the events (as far as I know). You probably just need to wait for your SDK ;(
When you start, make sure that your first if- clause is
If pVal.Before_Action = True
otherwise you will get a lot of events twice (once before and once after event).
Here is a quick sample of a handler I use.
HTH Lutz Morrien
Public Overrides Sub HANDLE_FORM_EVENTS(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef BubbleEvent As Boolean)
    Try
      If pVal.Before_Action = True Then
        Select Case pVal.EventType
          Case SAPbouiCOM.BoEventTypes.et_FORM_ACTIVATE
            'update display
            DisplayLabels()
        End Select
        'AFTER ACTION
      Else
        Select Case pVal.EventType
          Case SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED
            Select Case pVal.ItemUID
              Case "btnPRINT"
                PrintLabels(True, False)
              Case "btnPRNTS"
                SBO_Application.Desktop.State = SAPbouiCOM.BoFormStateEnum.fs_Minimized
                PrintLabels(False, False)
                SBO_Application.Desktop.State = SAPbouiCOM.BoFormStateEnum.fs_Maximized
              Case "btnEDIT"
                EditMarkedLabel()
              Case "btnDELETE"
                DeleteMarkedLabel()
              Case "chkALL"
                SwitchMarkOnAllRows()
              Case "btnPREVIEW"
                SBO_Application.Desktop.State = SAPbouiCOM.BoFormStateEnum.fs_Minimized
                PrintLabels(True, True)
                SBO_Application.Desktop.State = SAPbouiCOM.BoFormStateEnum.fs_Maximized
            End Select
        End Select
      End If
    Catch excE As Exception
      SBO_Application.MessageBox(excE.ToString)
    End Try
End Sub

Conversion exit: numbers in database, two decimals on screen

Hi,
I need to save a numeric value in database containing only numbers. At the same time I need to display the value on a screen with two decimals. For example, the value of "12" should be saved in database as "1200", and it should be displayed on a screen like "12,00" (or "12.00", depending on user decimal settings). Furthermore, when user enters either a value of "12" or "12,00" on the screen and press enter, the program should display the value as "12,00" in both cases.
Therefore, I created a domain and added a conversion routine to it. This routine performs the conversion from display format to internal format and vice versa.
However, after trying with several options with MOVE and WRITE input TO output DECIMALS 2 statements and with different data types with different decimals places, I haven't been able to do this conversion.
I am a bit frustrated, since this task is rather simple. Is there a standard function module doing this conversion? What is the best and most efficient way to do this conversion?
I have also find the following standard function modules:
- CONVERSION_EXIT_QUANT_INPUT and CONVERSION_EXIT_QUANT_OUTPUT
- CONVERSION_EXIT_DEC_3_INPUT and CONVERSION_EXIT_DEC_3_OUTPUT
Regards,
Jarmo Tuominen

Hi Jarmo,
1. I don't whether i understood ur query properly!
2. U said u used a conversion routine in domain.
3. U can use the same routine(xxxxxx)
    (Say xxxxx is the name of conversion routine
     u specified in the domain)
     Now u can use the Function Module
     CONVERSION_EXIT_xxxxx_INPUT
     CONVERSION_EXIT_xxxxx_OUTPUT
   in your programs for WRITE Purpose.
I hope it helps.
Regards,
Amit M.
Message was edited by: Amit Mittal

Making calculations in QueryDesigner using only two decimals

Similar Messages

Maybe you are looking for