Making calls, i can hear the person im calling but the cant hear me.. what do i do?
everytime i make or recieve a call, i can hear the person on the other end, but they cannot hear me.... the muts button s not on... and it just picks and chooses weathe my voice wil go through or not.. help!
Hi kai1993,
Thanks for using Apple Support Communities. This article has steps you can take for issues with your iPhone's microphone:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Cheers,
- Ari
Similar Messages
-
How come i can hear my friend on ichat but she cant hear me?
how come i can hear my friend on ichat but she cant hear me?
Hi,
Several possibles.
1) The Mic (or Audio) item in the Video Menu is Off (unticked)
2) The Selection in App (iChat or Messages) menu > Preferences > Video section > Microphone Drop down is not pointing to a Mic that is active.
3) The Mic selection in System Preferences > Sound > Input tab is not the same device in the app and/or the volume is not set high enough.
In System Preferences > Sound > Input tab the blue response bar must get to at least halfway (preferably 3/4s) but not bang in to the right hand end.
The Mic should be the one select in the app itself.
IF you are using a headset then change both the System Preferences > Sound > Input to anything else but the headset mic.
Then do the same if the app.
Then go back to the System Preferences and "Set" that "First" and then do the App "Second"
Repeat the same process for the output options in both places.
8:17 PM Saturday; July 6, 2013
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I can hear the person on the other end but they cant hear me,sometimes i works sometimes it does not,any ideas?
Try this
Updated tests here: https://discussions.apple.com/thread/5136434 -
I had the power in my house, go off for atleast a min or so..
so than it said we had no wifi when it showed it was working.
so i shut off the ipod touch(3rd gen) for a min or so
than i turned it back on and it shows the USB cord facing Itunes.
and i did what it said and plugged it into Itunes
and it said i need the pass code..
but it wont show the pass code ..
what do i do?
i got it a year ago i belive..
and it says my warrenty is about to expire...what do i do?
i usally sync it on my desktop; which is a dell..
help?but it wont show the pass code ..
what do i do?
You have to type in the passcode. If you don't remember the passcode, read here. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software -
Where are the face time settings so i can fix my macbook white mic?
In FaceTime>Video do you have the correct mic selected>
If yo go to System Preferences>Sounds>Input does the mic when when selected? Do dots light with volume? -
I am unable to hear anything on my iphone 4 nor can the person i call hear anything when i speak -
I think that my ear piece and mike have both got magnetised how do fix the problem
Please helpI have the same problem!! It lead to many other problems with my phone
I just arranged a repair with apple. Yes its inconvenient to be without a phone for a while but if your phone is in warranty its good to get it looked at professionally! -
Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$
-
Hi I have a iPhone 4 and I seem to have a problem during calls. If I make or receive a call I can hear the person who is on the line with me but the other person can't hear me. This problem has occurred 1 week ago so please get back thank you
You use Restore to get the latest firmware build, not the Update button. You can only use the Update button, if there is an iOS update, say iOS 5.1.
this link talks about updating to 9A406 to fix the "No Service" issue with iPhone 4S:
http://iphone-and-i.blogspot.com/2011/12/fixing-iphone-4s-signal-problem.html -
Hi I have recently had a problem with my Iphone 5. When I make a call to someone I can hear them fine but they cant hear me unless I turn it to loud speaker then they can hear me, I can still talk to siri and on face time but not for a normal call. What would be making this happen ???
Hi Kel134,
Welcome to the Apple Support Communities!
I understand that you are having microphone issues on your iPhone when you place a call to someone and they cannot hear you unless you activate the speaker function. In this situation I would recommend the steps in the following article to help isolate and resolve the situation.
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Resolve the issue
Follow these steps, testing after each.
Make sure nothing is plugged in to the jack connector.
Make sure nothing is blocking any of the microphones (refer to the pictures below to find your device's microphones). Check for these:
Dirt or debris
A screen protector or case
When you're holding your phone next to your ear, make sure you don't block the microphone with your fingers or shoulder and make sure to speak into the microphone
Turn the iPhone off and then on.
Update to the latest version of iOS.
If necessary, find general iPhone hardware troubleshooting suggestions.
For further assistance, contact Apple Support.
I hope this helps,
-Joe -
my iphone4 disconnecting calls after 3 rings and show these calls as "missed calls" while the person who calls me still hear a dial ring. this started to happend after i upgraded to ios 7.0.4 please advise
this is really frustrating since i cant pick up calls with only 3 rings and i always miss them
i tried to restore like 3-4 times, didnt help
even tried to set the iphone as a "new iphone" on itunes and it didnt helpGenerally, when going out of the country and using a foreign SIM, carrier files can be changed. Go to Settings>General>About>and look at Carrier? What does it say? You may have to perform a restore. You can try a restore from a backup, that would reinstall the iOS, and would provide the latest AT&T carrier file as well. See if this will fix the problem.
-
sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.
Hey shahbazfromgbr,
Thanks for the question, and welcome to Apple Support Communities.
I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
2. Make sure the Ring/Silent switch is not switched to silent.
3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
9. Restart the iPhone.
10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks,
Matt M. -
When I press the + and - buttons, the volume icon appears, but the slider is empty. When I receive a call, I hear it ring, and I can hear the ringtones in the sound menu. However, the message/mail notifications don't make any noise, and I can't hear the sound menu.
- During a phone call, if I put the conversation on speakers ==> it works and the volume bar reappears. I can control the volume with + and - buttons. But when the conversation is over, the bar disappears again.
- With the headphones, everything is ok!
- I also noticed (only a few times) that when I do a silent to ringer mode, the volume slider reappears and works correctly during 2 or 3 seconds, before disappearing again.
I don't know what is problem,because the speakers work.Hello jam5064,
We've an article which provides tips that can help get your iPhone working correctly.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180
Cheers,
Allen -
my iphone4 is broken, if you call me i can hear you but u cant hear me, the apple store staff told that i need to backup my phone so that they can give me a new one, so how can i bakcup my iphone 4 using ipad? thnk you
To charmainesabanal
See your Other post...
https://discussions.apple.com/message/20604805#20604805 -
i just downloaded face time and I can hear the othe person just fine but they cannot hear me. But when I play music they can hear music. what is the problem and gow do i fix it?
Test your microphone in the Sound preference pane.
-
hi when i playback videos on my phone, i cant hear the sound ....also when i call someone or when i get a call i cant put it on speaker mode because i can hear them but they cant hear me
Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
If you have been through ALL of the troubleshooting steps and you're still having problems, then you'll need to bring your phone to Apple for investigation. -
Why can i hear the person talk but they cant hear me?
why can i hear the person talk but they cant hear me?
you microphone may be defective, did this happen after an update???
Maybe you are looking for
-
Exchange User IP - How do I use an Impersonated Exchange Account to Access Another Mailbox
Hey, I am trying to use the Exchange User IP to access another mailbox using an impersonated exchange account. How do I accomplish this? I know that the community developed Exchange Mail IP lets me do this but the activities available from that IP is
-
I changed the password on my Yahoo mail account and now the phone will not let me enter the new password. The mail account is greyed out in the settings menu.
-
Open file located in the HTMLResources with adobeDPS.dialogService.open()
Is it possible to open file located in the HTMLResources with adobeDPS.dialogService.open()? Method adobeDPS.dialogService.open('http://www.google.com/') - works well, but it not support relative URLs I can make button in InDesign layout with url "HT
-
Help me detect the error mentioned in subject: It gives error on every line where select1 is used. The syntax is correct as much as i know but it is not able to create the select statement and not able to execute the select query Brijesh Shah <%@ pag
-
I have a question and I'm not sure if the problem is imac related or Lion related, so I'm posting in both boards. Quick background, I purchased the Sonnet Express Card/34 Thunderbolt Adapter and Tempo SATA Edge ExpressCard/34 to connect my Drobo S t