Making calls using the Computers microphone and sp...

We recently dropped our telephone Land lines,
Stupid question:
Can I make local phone calls ( after getting Skype credit ) to call non Skype persons, using the computers microphone and speakers only ?
Thanks

yes you can, but you will need either some Skype Credit, or a suitable calling subscription
https://support.skype.com/en/category/CALLING_PHONES_SKYPEOUT/
http://www.skype.com/en/rates/
Regards,
Neil

Similar Messages

Facetime call using the same APpLe Id on iPad and Mac

The FaceTime call using the same apple ID with the new iPad and iMac cannot put through to myself. In this case I do not want to get a new apple ID for FaceTime what can I do? I want to use the current apple Id.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
I saw one post where a user said dust got inside the small microphone hole. Using a vacuum cleaner removed the dust and restored the audio.
 Cheers, Tom

I had to take my hp back to factory setting and reinstall itunes, when I tried to use Itunes match it said i had to Deauthorize all my computers. I am using the same computer and desperately need access to my music.

I had to take my hp back to factory setting and reinstall itunes, when I tried to use Itunes match it said i had to Deauthorize all my computers. I am using the same computer and desperately need access to my music.

When you reset to factory settings, the computer is de-authorised.
In iTunes menu Store > View Account > sign in > App Store > Deauthorise All.
Once done, authorise this computer iTunes.
Note: you can only do that once a year.

I recently bought a new macbook pro and set it up using the migration assistant and my mac mini. I can't get the text message forwarding feature to work with both computers.

I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

I just updated my Apple ID to a current email address, it worked on my laptop but my phone is still using the old one and neither password works. I can't download or use anything other than phone calls and texting on my phone now. Help!

I just updated my Apple ID to a current email address, it worked on my laptop but my phone is still using the old one and neither password works. I can't download or use anything other than phone calls and texting on my phone now. Help!

go to settings
then to store
tap your id then click sign out
then sign back in and you should be fine

How to make a SOAP call using the PI 7.1

Hi All,
Can you please tell me how can we make a SOAP call using the PI 7.1?
Thanks in advance

Hello Shweta,
Could you please clarify your question? Do you mean you need to call some business system from PI via SOAP? Or do you need to test integration model using SOAP client?
If the requirement is to make a SOAP call to PI (send SOAP request to PI system), please refer to the guide which Stefan suggested in his post. The general procedure is the following:
1. generate concrete WSDL in PI (you can do it via PI's Integration Directory);
2. import generated WSDL to SOAP client (e.g. XML Spy described in the guide or soapUI which is free SOAP client);
3. create SOAP request message in the SOAP client and send it to the endpoint (in this case, it will be sent to PI).
This is general procedure for making SOAP calls to SAP PI using external SOAP clients. Please advise if specified steps should be described in more details or if there are any questions from your side regarding them.
If the question is about calling business system from PI via SOAP, then please refer to SAP Help, configuration of SOAP receiver::
http://help.sap.com/saphelp_nw04/helpdata/en/29/5bd93f130f9215e10000000a155106/frameset.htm
My regards,
Vadim

I am using the mac QQ and when I login it said login timeout.

I am using the mac QQ and when I login it said login timeout.

If you are missing using google maps - try the Nokia map app called "here"

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i

If you are missing using google maps - try the Nokia map app called "here"

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

If you are missing using google maps - try the Nokia map app called "here"

HT2729 itune and when i use the "add file to library" methode! this is frustrating! i am useing the latest version and i am on pc! please help!

My itunes doesnt want to accept/disply videos when i drag an drop it onto itunes! i am using the latest version and i am on windows 7! please help!

Same problem here, and but only on my laptop... I tried to add an mp4 file to itunes on there and it wouldn't work, moved the same exact file to my desktop and it worked fine. Both computers are using windows 7.

How do I do use the custom code and format for a percentage with 2 decimals in Report Builder 3.0?

In Report Builder 3.0, I have the following custom code entered:
Public Function SafeDivide(Numerator as String, Denominator as String) as String
Try
If Numerator = “” or Denominator = “” then
Return “-“
End if
If Numerator = “-“ or Denominator = “-“ then
Return “-“
End If
If CDbl(Numerator) =0 or CDbl(Denominator) = 0 then
Return “-“
End if
If IsNothing(Numerator) or IsNothing(Denominator) then
Return "-"
End if
Return Val( ( (CDbl(Numerator) / CDbl(Denominator) )*100 ) )
Catch
Return "-"
End Try
End Function
I call the custom code in the cell with the following equation:
=Code.SafeDivide(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value),sum(Fields!LY_UNITS.Value))
I have the format for the cell set to 0.00%, but it’s not being followed.
I want the result to be formatted as a Percentage, but instead I get values like:
-78.9473684210
80
300
-100
I have the format for the cell set to 0.00%, but it’s not being followed.
How do I do use the custom code and format for a percentage with 2 decimals?

Hi AngP,
After testing the issue in my local environment, I can reproduce it. Based on my research, I find this issue is caused by the type of Units_VAR_Percentage cell is string, while the type of CDbl(Parameters!Var_Threshold.Value) is double, so they cannot be
compared.
To fix this issue, we can add a hidden column (Textbox91) next to the Units_VAR_Percentage column, and type =(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value)) /sum(Fields!LY_UNITS.Value) as the expression. Then use the expression below to control the
BackgroundColor:
=iif(iif(reportitems!Units_VAR_Percentage.Value=CStr(format(reportitems!Textbox91.Value,"0.00%")),reportitems!Textbox91.Value,0)>CDbl(Parameters!Var_Threshold.Value),"Yellow","PaleTurquoise")
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

The Response Group application was unable to transfer the call to the configured destination and no fallback exists

Hey,
I get this error message when calling into an unassigned number which redirects to a response group:
From user URI:
sip:[email protected];gruu;opaque=srvr:Microsoft.Rtc.Applications.Acd:RS6nRGV9DlmpNsLtmz5qeQAA
To user URI:
0220198611;phone-context=DefaultProfile
From user agent:
RTCC/4.0.0.0 Response_Group_Service Announcement_Service
Diagnostic header:
26005; reason="The Response Group application was unable to transfer the call to the configured destination and no fallback exists."
Interestingly "To user URI: 0220198611;phone-context=DefaultProfile" is the number off the caller not the destination. I wonder is this a bug? So is the response group trying to transfer to this number and failing because of course it doesnt exist?
As you can see the below the number I am calling is not 0220198611:
From phone number: 0220198611;phone-context=DefaultProfile
To phone number: +6493760053 From mediation server: onzlyncfe1.domain.co.nz To mediation server: From gateway: 192.168.100.70
To gateway:
Disconnected by: +6493760053
Does the calling party's number have to be normalised? If so how can I do this because the global normailisation rules dont seem to apply
in this situation. These rules do work when when calling into a users DDI.
Also to be clear....
+6493760053 is an unassigned number which is setup to redirect to a response group.
If I assign +6493760053 to a user then it works.
Additionally this works perfectly when the gateway sends the call to our legacy 2007r2 mediation server then on to Lync. If the gateway sends the call directly to the co-located Lync mediation server I get the error described.
I hope I make sense. If you are confused let me know :)
Help is appreciated.
Thanks,
Andrew

Hi ANdrew
Kindly advise how you transfered the unassigned numbers to a specific user, i used the below command but it failled, the message displayed but the call never routed:
New-CsAnnouncement -Parent service:ApplicationServer:LyncFE.squareone.local -Name "SQ unassigned number announcement" -TextToSpeechPrompt "You entered an invalid extinsion you will be forwarded to the operator" -Language "en-US" -TargetUri "sip:[email protected];user=phone"
While [email protected] is the sip uri in my lync for the operator
could you advise what is my issue?

Can't use the Calendar, Book, and Card functions

I have updated my iLife programs to iLife 08 and cannot use the Calendar, Book, and Card functions as the program says the themes have not been installed. However, after looking in the Library/Applications Support/iPhoto folder, the themes are there but not being recognized by the program. I have reinstalled iLife 08 but still to no avail. Help!

Grant:
Try the following:
A. look for a folder title Themes in the User/Library/Application Support/iPhoto folder. If you find one there move it to the HD/Library/Application Support/iPhoto folder and reboot.
If that doesn't jump start iPhoto then go on to B.
B.
Restoring iPhoto Themes
1 - delete the current application.
2 - delete any files with iPhoto in the file name that reside in your HD/Library/Receipts folder.
3 - delete the Themes folder from your User/Library/Application Support/iPhoto folder.
Also look in the HD/Library/Application Support/iPhoto folder for a Themes folder. If there is one there then delete it also.
5 - boot into the system disk that came with your computer and do a custom install selecting only iPhoto.
After installing reinstall the iPhoto 7.1.1 updater again followed by a repair of disk permissions with Disk Utility. Also make sure you're running the latest Quicktime, 7.3.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

I have iphone 4s 32GB ,the volume of the ringer and alerts can't be adjusted using the volume buttons and lock sounds and keyboard clicks available, but all not appear ??!!!!!!!

I have iphone 4s 32GB ,the volume of the ringer and alerts can't be adjusted using the volume buttons and lock sounds and keyboard clicks available, but all not appear ??!!!!!!!

Hi nitramred,
To start troubleshooting this issue where you are unable to adjust the volume after receiving a call, please go ahead and first force close all of the apps currently running on the device, and then reset it by following the steps in the articles below.
iOS: Force an app to close
Turn your iOS device off and on (restart) and reset
Take care,
Alex H.

Can't answer iphone 4s calls using the button on the steering wheel of my Buick 2009 Enclave.

My iphone 4s is hooked up to my Buick Enclave 2009 using Blueetooth. I can activate Bluetooth via the button on the steering wheel and make voice calls with no problem. However when someone calls me, I can hear the phone ringing through the speakers and can see the number on the display but I can't answer the call using the answer button on the steering wheel. I have to reach over and touch answer on the phone and then I can continue the conversation via Bluetooh. Appreciate any help. Thanks.

The exact same issue is happening with my iphone 5. I don't believe it is the Life Proof case because I have had the pnone for several months and this just recently started happening, I took it to an Apple store and they claimed that this issue is new, that they have never seen it before. After about an hour of trouble shooting, they gave me a new phone.
The new phone worked fine (in the case) for about a week and then started having the same problem. I am on the Sprint network. I have an iphone 4s for work in the same case on the AT&T network and do not have any problems.
I am going to go back to the Apple store at my first opportunity. I wish I would have kept my old 4s which I had no problems with.

Making calls using the Computers microphone and sp...

Similar Messages

Maybe you are looking for