Making change in original application file for new version

Hi
I am new to DMS.
I have a basic query about versioning of DIR.
I have created a DIR with status in Released.
I have attached a original application to the DIR. Now when I am creating a new version of DIR, original application file is also getting copied to the new version which is desired.
My problem is I want to make changes into original application file in new version of DIR and want to save. But I am unable to do so. It is not allowing me to change the original application file for new version which is desired for storing some ISO documents.
Is there any settings which I am missing?
Waiting for reply ASAP.
Thanks and Regards,
Niraj Sikligar

Hi
If you want to make changes in the "Release" Status, go to dc10, select Doc type and define status screen. Do not put "S" (Lock mode) for Status - Release
Also please check in new version , you are clicking on Edit symbol in Orginals tab, if u double click the file, it would open always in display mode , and it wont allow you to make any changes
Regards
Aby

Similar Messages

In Internet Explorer, in the internet options, you can change the temporary internet files to check for newer versions of stored pages. Can this be done in Firefox? And How?

I just want to know how I can change the settings to check for newer versions of stored pages in Firefox.

There is a hidden preference that controls when Firefox checks for a newer version. # Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.cache.check_doc_frequency''', double-click on it to change its value
For details on the possible values of his preference see http://kb.mozillazine.org/Browser.cache.check_doc_frequency

Problem in Creating Source Files (Templates) for Original Application Files

Dear Friends,
I am trying to ccreate "Source Files (Templates) for Original Application Files" . I checked the link
http://wiki.sdn.sap.com/wiki/display/PLM/Templates-Document+Management
I created a new DOc. type TMP with no statuses, checked in KPO, assigned no. ranges.
Created DIR & assigned the template file, checked into storage category. DIR no. 10000000390 created.
In Workstation application "DOX" in define templates for originals : doc. type: ZGA, application: DOX; language- EN; no - 01; In source doc- entered doc. type- TMP, doc. no.- 10000000390, part & version
Assigned for required source file copy" ZGA doc. type. -- Default Appl. as "DOX" workstation application.
Now created a DIR with ZGA doc. type, when clicking on originals , DOX prompted and clicking on "create with template" . TMP doc. 10000000390 template open in a new window. I edited & saved. close the MS word window. When comes to DIR, it prompted, Original was changed Do you want to save the original?.
clicked on yes.
Saved the ZGA DIR. When I saw the new ZGA DIR created it didn't capture. Where I went wrong ?
Regards,
Sai Krishna

Dear Ravindra,
By going this below link, it seems we can use template for creating ne wdocument & attach the same.
http://wiki.sdn.sap.com/wiki/display/PLM/Templates-Document+Management
Following messages if you read, it may be clear.
By having templates in place we can utilize the pre-defined documents instead creating right from scratch.
Entries can be done in the Template and save the document.
Templates are used for standardization and uniformity. By using templates time consumption for creation of documents will reduce as most of the details are maintained in the master template and the same can be utilize by using the template when creating documents.
If in DMS editing functionality is not there what is the use of templates- documentation?
Regards,
Sai Krishna

Original application file with extension .flc not opening

hi,
I have got an requirement from my end user for DMS. He operates a software named FLOW LOGIC CONTROL, from there he generates a document with extension .flc.
I am able to check in the docuemnt in DIR, but when I try to access the same through DIR, it does not open.
I have defined work station application as FLC with file format as .flc and application (path and programme name) as %AUTO% for Define work station application in network in customizing.
Do I need to define application other then %AUTO% ? If so what it will be?
I have tried to open same file through DIR on the desktop where the software is running, but there also I could not open original application file.
Kindly help me resolving the issue.
Thanks and Regards,
Niraj Sikligar

Hi NIraj
The filed which I mentioned to You mentions the Path of the application which is used to display or change the Original Alpplication file.
example.
If you want to change or display Word document that you have checked in the content server, when you say display the system find the path where this Program ( eg. WINWORD.Exe ) .
eg Path C:\Program Files\Microsoft Office\OFFICE11\WINWORD.exe
Check in your PC this Path.Whenever you open a word document it uses this path for winword.exe to process word document.
So in your case the program may be installed in your PC or on some anather Computer.If its on your local machine the Mention * %AUTO%
If 2D or 3D Document mention it as suggested earlier reply.( I Think in your case a Engineering document is getting generated.And it must be 2D or 3D doucment. ).
If your program in on anather machine then give path name of that program.
Please press F1 in the field * Path with program Name * to check the help for possible entries.This will help you to solve the problem.
Hope this helps you
With regards
Mangesh Pande

Original application file Text search

Hi DMS Gurus,
we Have a common requirement of finding the DIR by using the word or sentence present inside the Original application file.
can any one please let me know the complete requirement for this, is this feature inbuilt in standard DMS system using Content Server.
I have did the basic configuration in transaction code SKPR07).
Enter the document class : DMS_PCD1.
Select: Edit / Administration.
A dialog box appears where the following data is preset,
Document Area : DMS
Administration table: DMS1DIDSTA
Class can be indexed: X
Set the indicator: Setup indexing.
and MIME text type is already present for Word, Excel, Pdf, PPT file type in Standard.
the Text search with original window appeared in CV04N but entering any text inside the Original it is unable to find the original.
is there any other setting i have to make please let me know.
Does this necessiates really installation of
1) A new Trex server for this process.
2) can this Trex server be installed inside Content server
points Awaiting .
Thanks in Advance
Kumar K

Hi DMS Gurus and SAPIENS,
Welcome to New Year 2009, Wish you all and your family a Very Happy Prosperous, Peacefull, and sucessfull New Year 2009.
Like we all know any Word document in a PC or System can also be searched by giving the known Words in the file as the search criteria.
why there is any 3rd Party software required to avail this feature, that too in DMS which mainly deals with external Documents.
will be more happy if this can be achived with SAP-DMS standard funtionality or configuration.
if Like the TREX server has to be Integrated with DMS Server as a stand alone server?
will this be Completely Taken care by Basis or Functional involvement is required.
Please Clarify.

How fast does Apple produce new RAW files for new cameras? I want to buy a D7100 wich is not supported in the present version?

How fast does Apple produce new RAW files for new cameras? I want to buy a D7100 wich is not supported in the present version?

Jeannot7 wrote:
I'm interested in seeing who gets the D7100 support first? Apple or Adobe!! I will go with the one that gets it out first.
FWIW,
Adobe keeps a quarterly release schedule for RAW updates. The current Lightroom 4.4 RC expires on 5/31/2013 which typically is an indication that the official release will be close to that date. According to the current list of new supported cameras, the Nikon D7100 is not slated to be supported (but that could change on release).
http://labs.adobe.com/technologies/lightroom4-4/?tabID=details#tabTop
The most likely time frame for Adobe support of the D7100 will be sometime in August or September 2013 (although there will probably be a Lightroom 4.5 RC available prior to that for testing purposes).

Edit Original application file

Hi,
How to edit an original application file in a document.

Hi,
Editing files (originals) attached to DIR depends upon the format of the attached file, authorization provided to the particular user.
the settings for workstation application has to be provided in dc30 for the particular attached file which needs to be edited.
for more advanced way in editing you need to have ECL Viewer to be installed on your system which helps in redlining/marking and even more editing options.
Thank You,
Manoj
award points if useful

I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD? If yes, where I find a tutorial about this? Thanks a lot and best regards all.

Hi people,
I'm typing from Brasil, sorry my English.
I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD?
I intend to keep the original DVD driver and install the SSD in the same HD place.
If yes, where I find a tutorial about this?
And I will like to know if the 512GB Solid-State Drive Kit for Mac Pro is compatible with iMac.
http://store.apple.com/us/product/MC731ZM/A/512gb-solid-state-drive-kit-for-mac- pro?fnode=5f
What brand and model of SSD do you recommend?
Thanks a lot for now and best regards all.
Carlos Sgrillo
Porto Alegre, RS, Brasil

Tukaine
Sep 23, 2012 10:59 PM
Since the late 2009 iMacs came out, replacing the hard drive has caused the internal Hard Drive Fan to start running at around 6000RPM.
This is due to Apple replacing the external Hard Drive temperature sensor with a proprietary firmware and using the drives internal sensor.
Replacement drives do not contain the firmware to deliver temperature data on the temperature sensor cable.
When the iMac does not receive a good signal from the hard drive it puts the fan at full speed to protect the drive.
If you replace your drive, your iMac will initially seem fine, but soon the fan will begin to speed up to full speed. Resetting the SMC (System Management Controller) will have a temporary effect, but again the fan will speed up.
Fixes people have used in the past included:
Using smcFanControl and the terminal to set a MAX speed for the fan and writing scripts to start this after every sleep/restart.
Shorting the temperature sensor cable (Not a possibility on 2011 iMacs) this tricks the iMac into thinking the drives temperature is very low, hence slow fan speed.
Both these fixes are less then perfect and leave the drive in a dangerous situation with no protection from overheating.
Another option people try is other Fan Control software. These programs will not work for this particular issue as they often only control the base speed, and if they do control the fans actual speed they rely on the temperature reported by the sensor which is now incorrect.
HDD Fan Control
HDD Fan Control works to fix this issue by reading the drives internal temperature using the S.M.A.R.T protocol and set the fans actual speed to a value good to protect the drive.
It runs at startup and continually to always control the fan correctly, prevent the loud fan noise and protect the drive from overheating
Instead of HDDFan Control, get the free SSDFan Control
http://exirion.net/ssdfanctrl/

Trying to locate an Application File for InDesign

Im trying to download the blurb plug in and at the set up stage it asks me to locate the Application File for my Adobe InDesign CS5 in my files but i cant locate it any ideas how i can locate it?

emmajanerobbo123 wrote:
Yes i have done a search and I cant locate it from the search, it comes up with an InDesign folder 7.5 but when i go into it it is empty
InDesign 7.5 is actually CS5.5, which is NOT the sme thing as CS5, so that may be the root of the problem here. When you open InDesign, and hold down the Ctrl key while you click on About InDesign inthe Help menu, waht version is leisted in the upper left corner of the About dialog?

Change the default country code for new contacts in Outlook 2013 for countries not listed in Control Panel Region Format

Dear all,
I would like to change the default country code for new Outlook 2013 contacts. My country is Mozambique (+258) and is not listed under Control Panel> Region> Formats> Format:
Is there any place (registry maybe, anywhere) where I can manipulate the existing formats or manually add a new format to the List ??? - for example Portuguese (Mozambique).
I am using Windows 8.1
I have tried changing the country on the phone and modem options and nothing changes. Also changing the Home Location on Region> Location to Mozambique didn't change a thing. The only place where I change something and produces results is the
Format List.
Any ideias???? If not, is there a place where I can ask Microsoft to include Portuguese (Mozambique) on future windows updates???
Kind regards,
Osvaldo

Hi,
Windows uses the information set under
'Phone and Modem' in the Control Panel to determine the default area code.
You can change the country/region to
Mozambique
and set your area code here:
Regards,
Steve Fan
TechNet Community Support

Original application file name

hello,
is it possible to view original application file name while searching document (attached file name not document name)?
is it possible.currently i am not using EasyDMS.
points will be awarded,be sure.
thx in advance..

Hi,
maybe it is possible to create a special classification characteristic which includes the original file name. This file name is normally stored in table DMS_PHIO2FILE. Here you will find the original file path and name.
You can also use report DMS_KPRO_READ. Here you can also enter document data and you will receive all necessary data on the attached originals as PHIO ID, LOIO ID and filenames.
Hope this information is usefull and don't forget to reward points
Best regards,
Christoph

I am getting a message that my iphoto library cannot be opened because I mades changes to my photos in a newer version of iphoto and I need to quit and use the newest version of iPhoto. but i cannot update it and or access my photos. Help. thanks.

I am getting a message that my iphoto library cannot be opened because I mades changes to my photos in a newer version of iphoto and I need to quit and use the newest version of iPhoto. but in update, it says i have no updates. i dont even remember making changes in iphoto.Help. thanks.

What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

What does "file create new version" do

What does the menu selection File --> Create new Version do?
How are the selections activated (not greyed out)?
Create iPod or iPhone Version
Create iPad or Apple TV Version
Create AAC Version
Any ideas? There no mention in the tutorial.

The first two options are for converting video into resolutions compatible with the device.
The third one is to create new versions of audio files, The type of conversion is controlled in Preferences.
Click on the import settings and choose the encoder and quality. the create version then may change to create mp3 version etc
The encoders are
AAC Encoder
AIFF Encoder
MP3 Encoder
WAV Encoder

How do I get to the Firefox equivalent of IE's "check for newer versions of stored pages" under tools, IE options

I need the firefox equivalent of Internet Explorer's (v8) "check for newer versions of stored pages under Tools, Internet Options, Browsing history. I cannot find where this would be in firefox and have an application that depends on seeing a "fresh" copy of a page each time it's served up by the web. Please advise.

You can find the tools under the Comments menu.

Upgrade would not install (3.6.8) error message Licence file for this version could not be found

The latest upgrade 3.6.8 downloaded but would not install. Error message read "the licence file for this version could not be found.". Visit Firefox homepage for more info
== I tried to install the latest Firefox upgrade. Have tried about 6 times

It can also help if you delete the Firefox program folder (C:\Program Files\Mozilla Firefox) before installing a new full Firefox copy.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that are locked in any way.
You can skip the step to create a new profile, that is not necessary for this issue.

Making change in original application file for new version

Similar Messages

Maybe you are looking for