Making changes at different stages of Development Track

This is a general question. I was wondering what Configuration needs to be imported into NWDS at different stages of Development Track with let's say 3 run time systems, dev-test-prod, defined per track. When i start the development i will import _dev configuration and add DCs, But not sure which configuration to be downloaded at the other sages. Post activation modifications, post release modifications etc..
Thanks and Best Regards
Firasath Riyaz.

Thanks for a quick reply Gentlemen,
Pascal i have gone through few of those weblogs before.. Rest i shall take a look.
DJ My question was in the context that, i have followed the scenario 3 tutorial for Development of techno and appl described on help.sap.com. In this tutorial i never came across a scenario where i need to import configuration back after i have, lets say activated the changes or may be after releasing the changes. If one comes across such a situation what configuration one needs to import from sld?
Hope i make myself clear? My apologies for the confusion.
Also what happens if one uses the same system for both dev and test, does the component get deployed multiple times on the same machine? I am squeezing in this question here, not sure if should do that or start a new thread.
Thanks and best regards.
Firasath Riyaz.

Similar Messages

I'm using Lightroom cc, I'm trying to create a develop preset. I'm making changes to one photo that I want to apply to many other photos, one of the changes is to blur the background using the adjustment brush. When I am blurring I am going over the photo

I'm using Lightroom cc, I'm trying to create a develop preset. I'm making changes to one photo that I want to apply to many other photos, one of the changes is to blur the background using the adjustment brush. When I am blurring I am going over the photo several times, when I go to create the preset the adjustment brush is not an option to check. How do I add the adjustment brush to the develop presets. Thanks Ron.

The adjustment brush cannot be added to a develop preset.
If you can replace the adjustment brush with a gradient filter or radial filter, you can add those to a dev preset.
If a gradient filter or radial filter is not an option for you, you can at least create an adjustment preset to remember your brush settings.

How to populate SNDPRN with different values in Development and Production?

Hello experts,
I have to fill the field SNDPRN in the message mapping with a different value in Development and in Production. As I am new to PI, I used a simple solution - but it is rather ugly: I set a constant value in the mapping in development and a different one in Production. However, I would like to know if there is any solution to have a condition in the mapping like:
IF system is Development, set SNDPRN as Constant1.
IF system is Production, set SNDPRN as Constant2.
(And eventually IF system is Test, set SNDPRN as Constant3)
Thanks in advance for your help,
Luis

Hi Luis,
      You can go with the parameterized mapping , where you can provide different values for SNDPRN in interface determination for development and production.
      At point of time if you want to change the values it requires only a change in the configuration.
      Please refer the below links for reference;
Parameterized Mapping Programs - Enterprise Services Repository - SAP Library
http://scn.sap.com/people/jin.shin/blog/2008/02/14/sap-pi-71-mapping-enhancements-series-parameterized-message-mappings
     We are following the same approach for some of our interfaces.
- Muru

HOW DO I CHANGE THE PITCH OF A MP3 TRACK IN GARAGE BAND 10.0.02

HOW DO I CHANGE THE PITCH OF A MP3 TRACK IN GARAGE BAND 10.0.02 , i could do it in old version looking at the you tube video, now the screen looks different cant find how to do it. Can some one put up a video please
Thanks

There are three ways:
Use an AuPitch filter on the track
Or turn the audio region into a loop
Enable "Follow Tempo and Pitch" for the track and use the transposition slider (that does not always work reliably)
To add an AuPitch filter:
Enable the audio Units in the GarageBand Preferences and then open the Smart Controls.
To add the AuPitch filter audio unit, click the Audio Unit button and enlarge the Smart Controls pane by dragging the dividing line to the Track Area upwards.
click the Audio Units Brick and add the AuPitch filter:
Type the pitch change in cents (100 cents per half note step) into the text field below the pitch control.
To create a loop from the audio file:
Select the region in the track and use the command "File: Add region to Loop library".
Set the current key and tempo, name the loop, and save the loop.
Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
You will be able to transpose the sample like a regular loo by changing the project key.

How can I change the tempo of a single track?

Hi,
I've been struggling with finding a way to change the BPM of a single track. There are three tracks and only one of them needs to be sped up. When I try using the flex editor, it is too complicated for what I am trying to do. Is there any more comprehensive way - a slider, or an input option - for changing the BPM of a single track in the newest version of garageband?

The reason some files sound funny and others don't is because audio is handled a few different in Garageband depending on it's source (audio your recorded vs Apple Loops vs non Apple Loop pre recorded audio). Each of these have different color regions with different properties. I just found this thread that might better explain it:
http://hintsforums.macworld.com/archive/index.php/t-67538.html
I hope that helps!

GarageBand - How to set different BPM for each track?

Hi, for the last couple of years, I've been using Sony Acid on my PC to mix multiple tracks to make blends and remixes of songs. I've just switched of the a MacBook, and am trying to get Garage Band to do the same. I'm curious whether or not I can set the BPM of each track individually so they will all play at the same BPM when mixed. I'm only able to find the master BPM that changes the entire BPM. Any help would be great. Thanks in advance.

Well, as far as I can see you don't really want different BPMs on each track, but you want all tracks to have the same tempo - only you want to make the tracks fit that tempo.
You could do that in GB by first bringing each of the tracks to the desired tempo, then export it and re-import it. (There's some other ways to do it, but they all involve some fiddling around and maybe some math.*)
Logic offers a nice feature where you can shorten and lengthen a region just by dragging it out. That could be used for the purpose you're trying to achieve.
*For example: Determine the BPM of each of the tracks. Set the project's tempo to the BPM of track A. Import track A, turn it purple so it follows the tempo. Then set the project to project B's tempo, import it, etc. You will end up with all tracks in the same tempo, and you can still make the whole project go faster or slower.

Is it possible to play my guitar and have the sound changed to different instrument like a sax? Like an emulator.

Is it possible to play my guitar and have the sound changed to different instrument like a sax? Have my Mac act as an emulator. I'm a guitar player, not a sax player, but I want a sax solo in my song.

You'd need a midi guitar for that. GarageBand does not create midi from audio. Use a different application, like Finale to create a midi file from your Guitar audio file.
Or play the sax track using a midi keyboard or simply GarageBand's musical typing. You can use the track editor to add expression and articulation afterwards.

How to change NLS parameters in SQL Developer?

I think that Oracle National Language Support is quite confusing. How can I easily change NLS parameters for SQL Developer (for all connections) to match exactly those that my database is using?

Hello,
SELECT 5/8 x FROM dual;F9 -> 0.625
Change decimal separator in preferences
F9 -> 0,625
It is different when I execute a query/script with F5, then I always get 0.625
SELECT * FROM nls_session_parameters
WHERE parameter = 'NLS_NUMERIC_CHARACTERS';
PARAMETER                      VALUE
NLS_NUMERIC_CHARACTERS         .,
SELECT 5/8 x FROM dual;
         X
     0.625
Change settings
SELECT * FROM nls_session_parameters
WHERE parameter = 'NLS_NUMERIC_CHARACTERS';
PARAMETER                      VALUE
NLS_NUMERIC_CHARACTERS         ,.
SELECT 5/8 x FROM dual;
         X
     0.625Even changing the settings with ALTER SESSION makes no difference
ALTER SESSION SET NLS_NUMERIC_CHARACTERS = ',.';
SELECT * FROM nls_session_parameters
WHERE parameter = 'NLS_NUMERIC_CHARACTERS';
PARAMETER                      VALUE
NLS_NUMERIC_CHARACTERS         ,.
SELECT 5/8 x FROM dual;
         X
     0.625
ALTER SESSION SET NLS_NUMERIC_CHARACTERS = '.,';
SELECT * FROM nls_session_parameters
WHERE parameter = 'NLS_NUMERIC_CHARACTERS';
PARAMETER                      VALUE
NLS_NUMERIC_CHARACTERS         .,
SELECT 5/8 x FROM dual;
         X
     0.625It seems the script output does not care about my settings :-(
Regards
Marcus

Flash Builder embed video in different stages

Hi, I'm Paulinho Cé from Brasil and i have a problem to embed youtube videos on my site in different stages FlashBuilder.
I have 10 videos and want to display them in the event of each button corresponding to a different stage.
This code works in the main application but not in the stages of the site, because the functions and variables are global and can not change the url of the video to a video display differently at each stage.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
layout="absolute" verticalAlign="top"
creationComplete="Init();" >
<mx:Script>
<![CDATA[
private function Init():void
var url:String = "http://www.youtube.com/v/zlfKdbWwruY&hl=en&fs=1"; //url extracted from embed code
Security.allowDomain(url); //allow domain
youtubevid.load(url); //load video
]]>
</mx:Script>
<mx:VBox width="100%" height="100%" horizontalAlign="center" verticalAlign="top" verticalGap="0">
<mx:Label text="YouTube Video Embedded Inside Flex" width="100%" color="#060809" textAlign="center" fontSize="16" fontWeight="bold"/>
<mx:SWFLoader id="youtubevid" verticalAlign="top" horizontalAlign="center" width="425" height="344"/>
</mx:VBox>
</mx:Application>
<iframe title="YouTube video player" width="480" height="390" src="http://www.youtube.com/embed/kdhuQJRW6kA" frameborder="0" allowfullscreen></iframe>
Because this solution is of extreme importance to me, I requestthe help of experts, which immensely grateful.
Thanks for all,
Congrat's
Paulinho Cé

This appears to be Flex question. Please try posting this to the Flex forums here http://forums.adobe.com/community/flex/flex_general_discussion for better response.

Functional Module to refresh Material Master at different Stage in SD Cycle

In Material Master we maintain Profit Centre. The requirement is such that the client requires to change profit center very often & the requirement is such that the latest Profit Center is captured at different stages, i.e Sales Order, Delivery & Billing.
It is already assumed that we will require an enhancement for this & the logic will be that at each stage the enhamcement checks the Material Master & updates the latest update in Material Master.
It seems that there is a Functional Module, which refreshes the details of Material Master, when it is triggered. I am not aware that which is the Functional Module, which refreshes the Material Master details, when triggered & would like to know the name of functional module?
Regards,
Rajesh Banka

Dear Ashish,
As an enhancement, we have already considered using User Exit & also the logic to arrive at it. But I was informed that if we trigger one particular Functional Module, it refreshes Material master data at transaction level, but do not know, which functional module it is.
Thanks for your prompt response.
Regards,
Rajesh Banka

Making changes in Mail

making changes; delete, move to iCloud folder, etc.; in Mail with Mountain Lion has no effect; must use iCloud webpage to make changes. Didn't have this problem with Lion.

didn't change any setting/preferences in Mail.
Mail works correctly on wife's MacBook Pro
Do your settings correspond to your wife's under each of these three tabs in Mail Preferences? (The first few characters in the Incoming Mail Server address may be slightly different.)
Have you checked your Mail preferences at icloud.com to make sure iCloud isn't moving your messages locally?

Change of Sales Stage once again to the earlier one

Hi,
Can we restrict the user at sales stage so that he does not change the sales stage to previous sales stage once changed.According to client requirement,the user does not want open activities to come for the second time. Can we put field validation at sales stage level.
Quick response will be highly appreciated.
Thanks in advance,
Manish.

Found the solution myself,
The standard behavior is being modified in the user exits V09A0001 ( Reference/duplicate decision making manual address). Also refer to note 97832 for detailed solution.

How to change the profile value in the pl/sql code without making change in the database

How to change the profile value in the pl/sql code without making change in the database.

I have program ,where if the profiles 'printer and nunber of copies ' are set at the user level, by default when the report completes the O/p will be sent to the printer mentioned in the set-up. but what user wants is
if these Profiles are set for the user running this program automatic printing should not be done.

How can I get my ipod touch to properly sync all my songs, when it keeps stalling in different stages and hours later doesn't sync all the songs I checked?

I can't seem to get all my songs and playlists that are checked to sync to my ipod touch. The ipod has been troublesome since the first round of updates. It was originally set on "itunes match", but it was dropping songs for some reason and since the wifi only operates when I'm in a place where wifi is available, I can't download the songs again while I'm on the road. I turned off itunes match and plugged it in to my computer to sync it that way, and it keeps stalling in different stages of the sync process. After hours and hours of being stuck, it "completes" without syncing any of my playlists that I checked.

Try a low level reformat of the iPod's hard drive to possibly try and repair some of its damage. Use the instructions in this article to walk you through the process.
http://www.methodshop.com/gadgets/ipodsupport/erase/
B-rock

How can I get my ipod touch properly when it keeps stalling in different stages and hours later doesn't sync all the songs I checked?

My ipod touch has been stalling in different stages of the syncing process and when it finally stops hours later, it only syncs some of the songs and playlists I've checked. This is well within the memory storage. To be honest, this thing has been a problem since all the updates a year ago. I've been using my ipod classic, but I would like to use this one because of the blue tooth capabilities. This is very frustrating.

Try here. Do not forget the Additional Information topic.

Making changes at different stages of Development Track

Similar Messages

Maybe you are looking for