Making changes in cs4 then to encore cs4

hi i thought when i make a change in my project in cs4 such as a small edit it would also go to the encore cs4 proj i created am i right or wrong ?

Good point Jeff.
To the OP, here's a look at the WAB:
I find it very easy to hit the \ (Backslash key) to zoom out on the Timeline, and then Dbl-click on the little block in the middle, to expand the WAB to the full Timeline.
Good luck,
Hunt

Similar Messages

  • Change Background in Menu Creation  Encore CS4 and Photoshop

    I am creating a menu using Encore and Photoshop. I Used the Encore Libray to create a blank background and also created a series of buttons adusting them in Photoshop CS4. However, when I try to change the background with a new jpg or psd file I open the picture in Photoshop but not as the new background layer  I am trying to achieve. Can anyone tell me where I am going wrong? 

    Dear Bill,
    Thank you for your prompt reply. However, I don't think I am explaining my problem correctly so if you have the patience I am sending you this little "Jing" movie which will show you my problem
    http://www.screencast.com/t/YWI5MDcw
    Regards
    Stanley
    Stanley Dalnekoff, President
    HeritageVideo
    70 Marvel Road
    New Haven, CT 06515
    Tel:203-397-0775-O
         203-464-4975-C
    www.heritagevideo.net
    Date: Fri, 30 Jul 2010 12:39:20 -0600
    From: [email protected]
    To: [email protected]
    Subject: Change Background in Menu Creation  Encore CS4 and Photoshop
    There should be no problem when adding the image of your choice, with Edit in Photoshop.
    When you choose Edit in Photoshop, several things happen:
    1.) a TMP PSD for that Menu is created.
    2.) links are created between En and PS
    3.) PS is launched, and that TMP PSD is then Opened in PS.
    When one has edited that TMP PSD in PS, they must do a Save to allow those links back to En*.
    If you are doing a Save_As, or Save_As_a_Copy, those links will NOT be followed, and the Menu will NOT update in En.
    Good luck,
    Hunt
    I have encountered some instances, where a single Save does not follow those links. With experimentation, I have found that 3 Saves (Ctrl+S) will force those links to be followed, and the Menu updated in En. Not sure why this happens sometimes, but 3 seems to be the "magic number," at least for me.
    >

  • Is there a way of making contacts in CS4???

    Is there a way of making contacts in CS4??? I can't find it and I have to go back to CS3 every time I have to give proofs to my clients. I hope is not taken out from the program.
    Thanks,
    Dan Demetriad
    [email deleted for privacy]

    Hey Dan,
    I've found the "PS CS4 goodie" folder on the adobe site and installed the contact sheet II option into the automate area - you should be able to do the same and save the actions set you use in CS3 then bring the set into CS4 and get what you need with out having to keep going back into CS3. It's just not practical for me to have a set of contacts in pdf format, it's definitely a step backwards for me.
    I'd hoped for an improvement, currently I drag the custom sized sheets I've got it generating as tiff files onto another tiff template I've set up, so I can include a title etc on the actual print out - but this is time consuming. I hope you dont mind me asking but how did you edit yours with actions? I'd love to automate the process but not sure how as each title is different as per the job, and I like to add page numbers.
    Apologies for the rambling rant, hope you get sorted Dan.

  • Color Balance Adj Layer Characteristics Changed from CS4- CS5?

    Maybe some guru with better connections to Adobe knows the answer to this. (or maybe I just forgot).
    I just discovered (and I don't think it is pilot error) that the characteristic behavior of the Color Balance Adjustment Layer is different in CS5 than it was in CS4/CS3.  (Much stronger in CS4/CS3).
    In addition, there is also an associated behavior that is like a buried legacy mode that is not made visible to the user.  Here is what I mean.
    If I create an image in CS4  with a single Color Balance Adj Layer, I get an adjusted image.
    If I open that same PSD file in CS5, the same image is displayed.
    If I use the same base image, yet create the Color Balance Adj Layer from within CS5, the adjusted image is different than the prior two.   So the Color Adjustment Layer acts like it has a hidden legacy mode where the characteristics are one type if created in CS4/CS3 yet a different characteristic if created in CS5.
    My mind might be slipping (or my cold has the better of me) because I do not remember this as a documented change and I searched the internet for "What's new in CS5" etc etc.  I don't remember anything on other forums about this either.
    I guess the good news is, the new characteristic of the Color Balance Adjustment Layer is better behaved with a transfer curve with less clipping for highlights and shadows.  Very similar to the better behavior of the change of the Brightness/Contrast Adjustment Layer going from CS2 to CS3.
    Here are some comparison images.
    This is the Layer Stack Used with Base Image of simple B to W gradient with CB Layer on top with just the highlights pegged to red.  This is the exact same Layer Stack for all of the images shown:
    Here is the first image.  This was created in PS CS4 and displayed from CS4 with the conditions show above:
    This is the same image from above that was saved as PSD with profile and them imported to PS CS5 with same profile.  There was no change:
    This next image is using the same base gradient, yet then creating the CB Layer from within PS CS5 with the same parameters, only the Red pegged for the Highlights:
    Does someone have an easy answer for this.  Can someone duplicate this and confirm the change from CS4 to CS5.  A test by someone else would either confirm I am off base with pilot error or there is something to this.
    And yes, all the images were sRGB and kept in sRGB for creation/display.  All Screenshot images were the images brought up side by side on the same color managed monitor.   All Edit > Color Settings were identical.
    Thanks in advance for any help
    John

    OK, Chris, but before I perform my act of self flaggelation for the benefit for all and my extra embarrassment, let me add in some useful information about the Color Balance Adj Layer that could be helpful.
    I was working with another individual who wanted a better understanding the color balance adj layer, what is was exactly doing, how the shadows, midtones, and highlights interacted, and the differences with preserve luminosity checked or not, and also why the preserve luminosity was so hard to predict (e.g. did not really preserve luminoisty).
    Without going into the deails of all of that, the tidbit I will leave as far as penance for my stupid original post above is that the Color Balance Adj Layer with the Preserve Luminosity box checked does a reasonable job or preserving luminoisty for the midtone adjustments yet definitely does not for the shadow and highlight adjustments.
    An easy workaround for this is to just set the Color Balance Adj Layer Blend to Color which preserves Luminosity of the image presented from lower layers while maintaining the Color as best it can from using the CB Adj Layer  (It holds the Hue and does its best to keep the same Saturation yet the Luminoisty from the presented image from lower layers takes prescendence).  This does a much better job at preserving Luminosity than using the checkbox option.    I usually use this approach and keep the Preserve Luminiosity box turned off.
    The error that I made was during the fairly involved exchange with this other individual, at some point I accidentally set the Layer Mask for the CB Adj Layer to 50% gray and did not notice that it had changed from the default white.  Much further down the line, when this other individual could not exactly recreate my results, he mentioned working in CS3. Thinking this odd,  I pulled up CS3, created the image from scratch (without the erroneous mask change to 50% gray) so therefore I duplicated his results and did not realize the error was in my original Layer Stack.  To make a long story short, I went and checked for differences in all system settings, profiles, Color Settings, opacity settings, Blend settings, Layer Style settings (and their options) etc, etc and overlooked a change in the Mask gray level.        When I quickly flashed back and forth between the two documents/stack it finally popped out at me. Mea Culpa.

  • Color range change in CS4 (why change this?)

    another "change" in CS4 i quite dont understand why they did.
    in CS3 i was about to sample from the toolbox the forgeground color (black-white) as well as change the foreground color (x)
    and then sample from then, ensuring that I was sampling the purest white and black from that channel, now it does not work anymore.
    I really feel many changes were done to CS4 were done without consulting (testing?) by heavy users (people that spend 8-12 hours a day with application.  Maybe I'm wrong, but it is annoying, even the quick keys for cycling through channels make no sense whatsoever,  (command 1, to start from the FIRST channel is so INTUITIVE!!!)

    The legacy option that you are looking for in Color Range, is still available by unchecking the strangely named "Localized Color Clusters" - this creates much cruder selections but does it more "purely"- it creates the same selections as before, and still uses the foreground colour as a starting point. Actions created in CS3 and earlier will pick up this option.
    I really feel many changes were done to CS4 were done without
    consulting (testing?) by heavy users (people that spend 8-12 hours a
    day with application.
    Yes, many of us are getting this impression especially with the last 2 revisions, although this particular feature isn't really one example. There is a lot of new functionality in Color Range under the hood, and the quality of the selections with "color clusters" on is hugely improved.

  • Has maximum size for documents changed in CS4

    In InDesign CS2 and CS3 maximum file size is 5486 mm.
    Can anyone tell me if it has changed in CS4?

    I am in the middle of a job with quite large jobs between 10 - 16 metres.
    As we just ordered CS4 I wondered if it would be easier using CS4.
    But no ... Thank you for testing.

  • Why have the channel shortcuts changed in CS4? Cyan used to be "cntrl+1" and now it's "cntrl+3" for

    Why have the channel shortcuts changed in CS4? Cyan used to be "cntrl+1" and now it's "cntrl+3" for example. Why?

    http://blogs.adobe.com/jnack/2008/10/shortcut_changes_in_pscs4.html
    Note there's a link to a plug-in in the article that remaps the keys to the old behavior.

  • SEO changes from CS4 to CS5

    My site that mainly has Flash was recently updated with a file made from CS5. In my google dashboard there are a lot of new keywords that are only in the Flash file. My page ranking also dropped from 4 to 11. Does anyone know if any changes from CS4 to CS5 could have caused this? If so, what can I do to disable this compatibility with search engines?

    I am not an expert on SEO matters and do not keep up with advancements relative to it.  It is unlikely the Flash version has anything to do with your SEO rankings.  SEO is based on the information that the engines can see when they read the page.  You should be able to see the words you mention listed in the embedding code if they are being included in your dashboard.  Flash will create comment tags in the html for different key elements in a file such as links used and whatnot.  As far as I know, they cannot yet see inside the Flash file, only the external embedding code that is used.

  • Questions about changing a CS4 windows licence to a Mac licence

    Good morning,
    One of my friends is going to buy a imac computer and his old computer was a PC under windows seven with adobe CS4 web premium student edition.
    is it possible to change the CS4 windows licence to a mac licence?
    We have to pay something to do this?
    I saw on a lot of forum tha twe have to desactivate the licence on the old PC before installing a licence on the new computer, Can you explain how to do his.
    Thanks

    Hi TFD, It may be helpful to browse or start a thread in this forum:
    http://forums.adobe.com/community/creativesuites/creativesuites_windows?view=discussions&s tart=0
    Thanks,
    eidnolb

  • Disco Plus - hangs when making changes to reports with lots of worksheets

    Have run into this several times and the problem seems to go away sometimes on its own and then reappear at a later date.
    Have a report that contains 11 worksheets. Can run any of the worksheets with no issues. However, when making a change to any worksheet, Disco hangs on the edit screens and I eventually receive the message "Contact with the Discoverer server has been lost. To continue your work, please restart Discoverer Plus. If this problem persists, please contact your Oracle Application Server administrator" I have tried restarting Disco Plus several times over the course of several days and still the same issue. I have no problems making changes to this same report through Disco Desktop.
    I have also tried moving out the individual worksheets from this report as separate reports and they work fine and can be updated with no issues. This seems to only be a problem when there are many worksheets within 1 workbook.
    Would appreciate any assistance.
    Disco Plus 10.1.2.54.25
    Stephanie

    Hi Stephanie,
    We have 30,000 employees in our company so i sympathise completely!
    You shouldn't need to separate each worksheet and make the change separately. The problem we experience is only in Discoverer Plus. I think it has something to do with the memory allocation on the server, which Plus must use. In Desktop we've found that reports like that are fine. They may take a while to save but in terms of editing reports its ok, because the memory on the machine is being used. If you're having problems in Desktop i'd check your PC spec.
    I wouldn't say its a program error, not enough memory on the server more like, particularly as you're saying that sometimes you can't do anything and then other times it all works fine. Have you got lots of Discoverer Plus users in your company? If so try coming into work a little earlier and try it then or at the end of the day. If lots of people are running reports its going to slow down.
    It could also be that the DBAs haven't allocated enough memory as DBAs generally don't like Discoverer. They love to blame database/server performance problems on Discoverer. We proved them wrong. On one occasion they blamed a major outage on a report that I was running. It was a big report. But they ran traces, plugged in their diagnostics stuff and got me to run the report. It showed up as this tiny blip, they were so embarassed!!
    They just need to intelligently configure stuff, build a good data warehouse etc. I use the word stuff because I don't really know much about servers, warehouses, LPARs etc etc. I do think that quite a few DBAs don't embrace Discoverer because they see it as a hindrance to their jobs. If I was keeping a database up and running I wouldn't want cheeky business users 'playing around' with massive data extracts on my turf!
    We have found that sometimes its easier to write a report from scratch in plus than editing it. When you make a change it takes longer to apply it, especially when adding a sort or changing formats. The annoying thing about formatting for us is that we have to use corporate colours, and desktop doesn't do hex values so all our formatting is done in plus.
    Regards,
    Lloyd
    Edited by: Lloyd T on 24-Feb-2009 13:22

  • How to change the profile value in the pl/sql code without making change in the database

    How to change the profile value in the pl/sql code without making change in the database.

    I have program ,where if the profiles 'printer and nunber of copies ' are set at the user level, by default when the report completes the O/p will be sent to the printer mentioned in the set-up. but what user wants is
    if these Profiles are set for the user running this program automatic printing should not be done.

  • I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

    I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

    You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (114957)

  • !!!How to restrict user for making  changes in Sales order , partner level

    Hi all,
    Can anybody tell me how to restrict user for making  changes in Sales order  at partner level, is it through user exit?

    Hi Ruchi
    I hope u had gone to the screen fields which u want them not to be editable. So there u select all the fields contents which u do not want to to be changed and check the boxes with W.content and Display and save it. Once evrything is done u have to activate the particular transcation going in to the standard variants and put the name and click the activate button.
    Hope its clear
    Reward if help ful
    Sri

  • I used to have a apple id but when i got my macbook i changed it. Then i downloaded OS X and updates in my app store will not let me change my apple id back to my new one it just still uses my old one. What do i do?

    I used to have a apple id but when i got my macbook i changed it. Then i downloaded OS X and updates in my app store will not let me change my apple id back to my new one it just still uses my old one. What do i do?

    Content and Apple IDs -
    Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple Id to another. Apple does not merge Apple IDs. You will never be able to access your content bought with another Apple ID with a new ID.

  • I go to my settings and i change something and then i hit the home button and it wont let me go home. So i then try to turn my screen of and turn it back on to see if that will help. It will not shut off either. How do i fix this problem?

    I have a problem! I go to my settings to change something and then i hit the home button to go home and it will not let me. So I hit the button on the top to turn it off to see if i can make it anybetter. My screen will not turn off! I tried to shut it off and it wont let me do that either. So now i am stuck in my iPod settings until my iPod dies. How do i fix this problem?

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

Maybe you are looking for