Making Changes in Essbase & Hyperion Planning

when we make changes in Hyperion Planning Application they show changes in Essbase Application also but When we make changes in Essbase Application It does not show changes in Hyperion Planning Application. Why?

Any changes you want to make to the Essbase database for Hyperion Planning must be done through the Planning app. Otherwise direct changes made on the Essbase side will be erase upon the refresh.^^^Not strictly true -- the Essbase UDA_HSP allows Essbase-only properties without reference to Planning. This is the way Planning worked till System 9. You can still use this UDA in Planning -- I used it in Planning just last week for a Scenario member calculation that referenced members in only one Plan Type out of three. It is a pain in the rear and impossible to resolve in Planning member formulas themselves.
Regards,
Cameron Lackpour

Similar Messages

  • MSAD users not able to login Hyperion Planning

    Problem Description: I have configured MSAD in shared services. I am able to search the users with their email id in shared services.In Unix enrironment, we have installed Oracle database and Essbase.Hyperion planning , shared services, HFR, web Analysis installed in Windows Server.
    I am able to search the users in shared services w.r.t email ids. Also able to login to workspace with email id and password.
    But when I select Planning application, it's throwing the below error.
    "An error occurred while processing this page. Check the log for details. Please close the current tab and open application again
    Failed to sync with user provisioning. Check Planning log for details".
    When I open FR reports, it's throwing the below error:
    "Error: Create Connection failed [cannot connect to olap service. Cannot connect to Essbase server.Error (1051293): Login fails due to invalid login credentials (OlapServer=10.6.232.72;mode=EMBEDDED;]]".
    I have tried 'updateuser.cmd'.
    I just double clicked on ''updateuser.cmd'. After that stopped and started the services. Even though It's not working.
    For more info please find the attachments...
    Kind Regards,
    Rajendra Prasad Gella

    Planning LOG
    ####<Feb 13, 2012 12:04:19 AM GST> <Warning> <JMX> <ERPHYPAPP> <Planning0> <DmsThread-1> <<WLS Kernel>> <> <0000JLYRQHo07yELz6x0iW1FCx9N000000> <1329077059827> <BEA-149515> <An error was encountered getting the attribute AdminServerListenPort on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
    ####<Feb 13, 2012 12:04:19 AM GST> <Warning> <JMX> <ERPHYPAPP> <Planning0> <DmsThread-1> <<WLS Kernel>> <> <0000JLYRQHo07yELz6x0iW1FCx9N000000> <1329077059829> <BEA-149515> <An error was encountered getting the attribute AdminServerHost on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
    ####<Feb 13, 2012 3:04:19 AM GST> <Warning> <JMX> <ERPHYPAPP> <Planning0> <DmsThread-1> <<WLS Kernel>> <> <0000JLYRQHo07yELz6x0iW1FCx9N000000> <1329087859100> <BEA-149515> <An error was encountered getting the attribute AdminServerListenPort on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
    ####<Feb 13, 2012 3:04:19 AM GST> <Warning> <JMX> <ERPHYPAPP> <Planning0> <DmsThread-1> <<WLS Kernel>> <> <0000JLYRQHo07yELz6x0iW1FCx9N000000> <1329087859101> <BEA-149515> <An error was encountered getting the attribute AdminServerHost on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
    ####<Feb 13, 2012 6:04:18 AM GST> <Warning> <JMX> <ERPHYPAPP> <Planning0> <DmsThread-1> <<WLS Kernel>> <> <0000JLYRQHo07yELz6x0iW1FCx9N000000> <1329098658808> <BEA-149515> <An error was encountered getting the attribute AdminServerListenPort on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
    ####<Feb 13, 2012 6:04:18 AM GST> <Warning> <JMX> <ERPHYPAPP> <Planning0> <DmsThread-1> <<WLS Kernel>> <> <0000JLYRQHo07yELz6x0iW1FCx9N000000> <1329098658809> <BEA-149515> <An error was encountered getting the attribute AdminServerHost on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
    ####<Feb 13, 2012 9:04:18 AM GST> <Warning> <JMX> <ERPHYPAPP> <Planning0> <DmsThread-1> <<WLS Kernel>> <> <0000JLYRQHo07yELz6x0iW1FCx9N000000> <1329109458489> <BEA-149515> <An error was encountered getting the attribute AdminServerListenPort on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
    ####<Feb 13, 2012 9:04:18 AM GST> <Warning> <JMX> <ERPHYPAPP> <Planning0> <DmsThread-1> <<WLS Kernel>> <> <0000JLYRQHo07yELz6x0iW1FCx9N000000> <1329109458490> <BEA-149515> <An error was encountered getting the attribute AdminServerHost on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
    ####<Feb 13, 2012 12:04:18 PM GST> <Warning> <JMX> <ERPHYPAPP> <Planning0> <DmsThread-1> <<WLS Kernel>> <> <0000JLYRQHo07yELz6x0iW1FCx9N000000> <1329120258515> <BEA-149515> <An error was encountered getting the attribute AdminServerListenPort on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
    ####<Feb 13, 2012 12:04:18 PM GST> <Warning> <JMX> <ERPHYPAPP> <Planning0> <DmsThread-1> <<WLS Kernel>> <> <0000JLYRQHo07yELz6x0iW1FCx9N000000> <1329120258516> <BEA-149515> <An error was encountered getting the attribute AdminServerHost on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
    ####<Feb 13, 2012 1:04:30 PM GST> <Info> <Common> <ERPHYPAPP> <Planning0> <Native Directory> <<anonymous>> <> <0000JLpxCRf07yELz6x0iW1FCx9N0001Ro> <1329123870530> <BEA-000628> <Created "1" resources for pool "EPMSystemRegistry", out of which "1" are available and "0" are unavailable.>
    ####<Feb 13, 2012 1:04:32 PM GST> <Info> <JDBC> <ERPHYPAPP> <Planning0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329123872487> <BEA-001128> <Connection for pool "EPMSystemRegistry" closed.>
    Essbase LOG
    [Mon Feb 13 13:39:57 2012]Local/ESSBASE0///1116629312/Info(1056800)
    Validation of back up file [u02/prod/Oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1/bin/essbasets_1329125997.bak] completed with status 0
    [Mon Feb 13 13:41:52 2012]Local/ESSBASE0///1112418624/Info(1051164)
    Received login request from [10.6.223.160]
    [Mon Feb 13 13:41:52 2012]Local/ESSBASE0///1112418624/Info(1051187)
    Logging in user [admin@Native Directory] from [10.6.223.160]
    [Mon Feb 13 13:41:52 2012]Local/ESSBASE0///1104279872/Info(1051001)
    Received client request: Get Application FrontEnd Type (from user [admin@Native Directory])
    [Mon Feb 13 13:41:52 2012]Local/ESSBASE0///1114523968/Info(1051001)
    Received client request: Set Application FrontEnd Type (from user [admin@Native Directory])
    [Mon Feb 13 13:41:52 2012]Local/ESSBASE0///1113471296/Info(1051001)
    Received client request: Get Security Mode (from user [admin@Native Directory])
    [Mon Feb 13 13:41:52 2012]Local/ESSBASE0///1115576640/Info(1051001)
    Received client request: Set Application Id For Planning (from user [admin@Native Directory])
    [Mon Feb 13 13:41:56 2012]Local/ESSBASE0///1112418624/Info(1051001)
    Received client request: Get Security Mode (from user [admin@Native Directory])
    [Mon Feb 13 13:41:56 2012]Local/ESSBASE0///1104279872/Info(1051001)
    Received client request: Get User/Group Info (from user [admin@Native Directory])
    [Mon Feb 13 13:41:56 2012]Local/ESSBASE0///1114523968/Info(1051001)
    Received client request: Create External User With Type (from user [admin@Native Directory])
    [Mon Feb 13 13:41:56 2012]Local/ESSBASE0///1114523968/Error(1051205)
    Single Sign On function call [css_getUser] failed
    [Mon Feb 13 13:41:56 2012]Local/ESSBASE0///1114523968/Warning(1051003)
    Error 1051205 processing request [Create External User With Type] - disconnecting
    [Mon Feb 13 13:41:56 2012]Local/ESSBASE0///1113471296/Info(1051001)
    Received client request: Create External User With Type (from user [admin@Native Directory])
    [Mon Feb 13 13:41:56 2012]Local/ESSBASE0///1113471296/Error(1051205)
    Single Sign On function call [css_getUser] failed
    [Mon Feb 13 13:41:56 2012]Local/ESSBASE0///1113471296/Warning(1051003)
    Error 1051205 processing request [Create External User With Type] - disconnecting
    [Mon Feb 13 13:43:03 2012]Local/ESSBASE0///1115576640/Error(1051021)
    You have been logged out due to inactivity or explicitly by the administrator.
    [Mon Feb 13 13:43:03 2012]Local/ESSBASE0///1112418624/Info(1051164)
    Received login request from [10.6.223.160]
    [Mon Feb 13 13:43:03 2012]Local/ESSBASE0///1112418624/Info(1051187)
    Logging in user [admin@Native Directory] from [10.6.223.160]
    [Mon Feb 13 13:43:03 2012]Local/ESSBASE0///1104279872/Info(1051001)
    Received client request: Get Application FrontEnd Type (from user [admin@Native Directory])
    [Mon Feb 13 13:43:03 2012]Local/ESSBASE0///1114523968/Info(1051001)
    Received client request: Set Application FrontEnd Type (from user [admin@Native Directory])
    [Mon Feb 13 13:43:03 2012]Local/ESSBASE0///1113471296/Info(1051001)
    Received client request: Get Security Mode (from user [admin@Native Directory])
    [Mon Feb 13 13:43:03 2012]Local/ESSBASE0///1115576640/Info(1051001)
    Received client request: Set Application Id For Planning (from user [admin@Native Directory])
    [Mon Feb 13 13:43:03 2012]Local/ESSBASE0///1112418624/Info(1051001)
    Received client request: Get Security Mode (from user [admin@Native Directory])
    [Mon Feb 13 13:43:03 2012]Local/ESSBASE0///1104279872/Info(1051001)
    Received client request: Get Security Mode (from user [admin@Native Directory])
    [Mon Feb 13 13:43:03 2012]Local/ESSBASE0///1114523968/Info(1051001)
    Received client request: Re-Sync User/Group with Single application (from user [admin@Native Directory])
    [Mon Feb 13 13:43:03 2012]Local/ESSBASE0///1114523968/Warning(1056612)
    This API is deprecated. Sync is no longer required
    [Mon Feb 13 13:44:58 2012]Local/ESSBASE0///1116629312/Info(1056797)
    Incremental security backup started by SYSTEM [DAEMON THREAD]. The file created is [u02/prod/Oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1/bin/essbasets_1329126298.bak]
    [Mon Feb 13 13:44:58 2012]Local/ESSBASE0///1116629312/Info(1056800)
    Validation of back up file [u02/prod/Oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1/bin/essbasets_1329126298.bak] completed with status 0
    [Mon Feb 13 13:56:03 2012]Local/ESSBASE0///1113471296/Info(1051001)
    Received client request: Create External User With Type (from user [admin@Native Directory])
    [Mon Feb 13 13:56:03 2012]Local/ESSBASE0///1113471296/Error(1051205)
    Single Sign On function call [css_getUser] failed
    [Mon Feb 13 13:56:03 2012]Local/ESSBASE0///1113471296/Warning(1051003)
    Error 1051205 processing request [Create External User With Type] - disconnecting
    [Mon Feb 13 13:56:03 2012]Local/ESSBASE0///1115576640/Info(1051001)
    Received client request: Set Application FrontEnd Type (from user [admin@Native Directory])
    [Mon Feb 13 13:56:03 2012]Local/ESSBASE0///1112418624/Info(1051001)
    Received client request: Get Security Mode (from user [admin@Native Directory])
    [Mon Feb 13 13:56:03 2012]Local/ESSBASE0///1104279872/Info(1051001)
    Received client request: Set Application Id For Planning (from user [admin@Native Directory])
    [Mon Feb 13 13:56:03 2012]Local/ESSBASE0///1114523968/Info(1051001)
    Received client request: Get Security Mode (from user [admin@Native Directory])
    [Mon Feb 13 13:56:03 2012]Local/ESSBASE0///1113471296/Info(1051001)
    Received client request: Get Security Mode (from user [admin@Native Directory])
    [Mon Feb 13 13:56:03 2012]Local/ESSBASE0///1115576640/Info(1051001)
    Received client request: Re-Sync User/Group with Single application (from user [admin@Native Directory])
    [Mon Feb 13 13:56:03 2012]Local/ESSBASE0///1115576640/Warning(1056612)
    This API is deprecated. Sync is no longer required
    [Mon Feb 13 13:59:59 2012]Local/ESSBASE0///1116629312/Info(1056797)
    Incremental security backup started by SYSTEM [DAEMON THREAD]. The file created is [u02/prod/Oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1/bin/essbasets_1329127199.bak]
    [Mon Feb 13 13:59:59 2012]Local/ESSBASE0///1116629312/Info(1056800)
    Validation of back up file [u02/prod/Oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1/bin/essbasets_1329127199.bak] completed with status 0
    Hbrserver log
    2012-02-13 13:18:30,311 WARN main com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving user by identity
    Please guide me after looking at all the LOGS
    It's a show stopper for me...I am getting any idea....
    Thanks for the support...
    Regards,
    Rajendra Prasad Gella...

  • Help! Hyperion Planning Dimension formula no longer works after name change

    Hi,
    I am having an issue with Hyperion Planning. I recently changed an account's dimension name from ASales & Property Taxes (D) to AProperty Taxes (D). However, the original name was used in a formula of another account. When I ran my refresh I got the following error:      
    Error [1200354] detected in member formula for member "AFacilities Costs as a % of Revenue".
    So I went into planning and went to the referenced account and looked at the formula. The formula still had the old member name ASales & Property Taxes (D) so I changed the formula to the new name AProperty Taxes (D). However, when I went to validate the formula I got the following error message:
    Error compiling formula for [] (line 1): expected type [NUMBER] found [STRING] (["ASales & Property Taxes (D)"]) in function []
    However, my formula has the new name not the old name. Here is my formula:
    ("AMaintenance (D)" + "AMaintenance (SG&A)" + "ANon Cap Equipment & Rentals (D)" + "ANon Cap Equipment & Rentals (SG&A)" + "AOperating Leases (D)" + "AOperating Leases (SG&A)" + "ARent & Occupancy Costs (D)" + "ARent & Occupancy Costs (SG&A)" + "AProperty Taxes (D)" + "AProperty Taxes (SG&A)" + "ASecurity (D)" + "ASecurity (SG&A)" + "AInsurance (D)" + "AInsurance (SG&A)")/ARevenue;
    Does anyone know how to fix this problem? Please help, as a result of this issue none of my accounts or clients are getting pulled into the Balance Sheet causing it to not tie with Oracle :( Thanks!!

    Hi,
    What happens if you try and refresh with updating the formula to reference the correct name?
    You won't be able to validate the formula because the member does not yet exist in essbase until the refresh has completed.
    If you have problems you could always, remove the formula and store it, refresh so the new member gets created, then put the formula back and refresh again.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Unable to Obtain a Connection to Hyperion Essbase from Planning Application

    Dear All,
    I have installed FDM+Foundation+HFM+Essbase+Planning 11.1.1.3 (Tomcat)
    I have stacked with the following problem:
    when I try to open my data form, I am getting
    “Unable to obtain a connection to Hyperion Essbase. If this problem persists, please contact your administrator”
    Validate Database Connection & Validate Essbase Connection are successful throw Manage Data Source menu
    Essbase user has admin privileges
    In EAS console I can make myself sure, that my application is running
    Data Form is valid (verified in Preview screen in Data Form wizard)
    Can somebody help me with it?
    Best Regards,
    Siarhei

    Thanks, John
    Summary
    Symptoms
    When attempting to connect to Hyperion Planning as the admin user, the following error occurs:
    Unable to obtain a connection to Hyperion Essbase. If the problem persists, please contact your administrator'
    Cause
    Hyperion Planning web accesses the application by making a connection to the Planning metadata in the relational repository (via Relational repository settings) and also to Essbase via the datasource settings.
    Any Essbase connection issues indicate problems with the Essbase settings in the datasource or are related to the Essbase server.
    Solution
    - Edit the datasource via the Configuration Utility.
    - Test the Essbase connection and make sure that the user used to make the connection is valid and has admin rights to Essbase.
    - Restart the Hyperion Planning service once the Essbase user has been given the correct access rights.
    - Login to the Essbase Administration Services (EAS) console and right click on the Essbase server name node -> Refresh security from Shared Services
    - Expand the applications node (under the Essbase server name node) and check that there is an application with exactly the same name as the Planning application.
    Note: Go to section 'manually recreating a Planning application in Hyperion Essbase, if the Planning application is missing in the above step.
    - Login to the application in Hyperion Planning web.
    Manually recreating a Planning application in Essbase:
    - Login to the EAS console as admin (the Essbase user used by admin must have Essbase administrator rights)
    - Go to Essbase servers -> your Essbase server name -> right click on applications -> Create application -> Using Block Storage and enter the exact Hyperion Planning Application name then click on ok.
    Note: The above step will only create the application shell without the databases.
    - Login to the application in Hyperion Planning web as admin and go to Administration menu -> Manage Database -> select database and filters (to create filter access to Essbase) and Refresh (refresh will also recreate the databases if they don't exist)
    Best Regards,
    Siarhei

  • Changing dimension types in Hyperion Planning

    I have a Planning 11.1.1.3 application and I would like to change the dimension type of a dimension. Dimension Customer is the one that has the country type now but it needs to be changed as dimension Product is the one that now need the country type, leaving Customer without a type. Is there a way of changing the type without having to delete all the data forms, deleting the members, changing the dimension names and the reloading the metadata to the correct dimension? I tried changing the type via Essbase but as soon as I refresh the application, the types change as they are in Planning (expected) and I can't seem to find a way of changing the type in Planning without having to rebuild part of the application! Thanks in advance for your replies.
    Santiago Ruiz.

    Cross post :- Regarding Data types in Hyperion Planning
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Error While Creating Essbase Database From Hyperion Planning

    Hi,
    While creating the Essbase Database From the 'Manage Database' in Hyperion Planning, I am getting the following error:
    com.hyperion.planning.olap.EssbaseException: Account (1060000)
    It gets stuck at Adding Dimensions.
    I have tried reconfiguring Planning, but no luck.
    My Relation Repository is MS SQL Server 2005 and the Essbase and Shared Services are on a Linux box.
    I am getting the following error in the Planning log
    [12-Nov-2009 10:50:41]: Propegating external event[ FROM_ID: 68b6dbf1 Class: class com.hyperion.planning.sql.HspLock Object Type: -1 Primary Key: 50001 ]
    [12-Nov-2009 10:50:41]: Processing cube: Plan1
    [12-Nov-2009 10:50:41]: Setting System CFG properties for Attribute Dimensions
    [12-Nov-2009 10:50:41]: Adding dimension: Account
    [12-Nov-2009 10:50:41]: Closing outlines
    com.hyperion.planning.olap.EssbaseException: Account (1060000)
         at com.hyperion.planning.olap.HspEssbaseOutlineAPI.EssAddMemberEx(Native Method)
         at com.hyperion.planning.olap.HspCubeRefreshTask.addDimension(Unknown Source)
         at com.hyperion.planning.olap.HspCubeRefreshTask.addDimensionsAndMembers(Unknown Source)
         at com.hyperion.planning.olap.HspCubeRefreshTask.buildOutlines(Unknown Source)
         at com.hyperion.planning.olap.HspCubeRefreshTask.run(Unknown Source)
         at com.hyperion.planning.HspJSImpl.runCubeRefresh(Unknown Source)
         at com.hyperion.planning.HyperionPlanningBean.runCubeRefresh(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:294)
         at sun.rmi.transport.Transport$1.run(Transport.java:153)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
         at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
         at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
         at java.lang.Thread.run(Thread.java:595)
    Thanks for your help.
    Edited by: user524093 on Nov 12, 2009 4:38 PM

    Have you tried restarting the services and giving it a try?
    Which version of Essbase/Planning are you on?
    If your Essbase server name has more than 30 characters, please use NODENAME with short server name.

  • Hyperion Planning migration error while refreshing/creating Essbase cube

    Hi,
    I'm migrating a Hyperion Planning application (11.1.1.4) to a complete other environment (due to the split of the companies). I have read most post on otn, but unfortunately nothing that helped me to solve the issue, yet... I hope someone can help me. Thanks in advance!
    I have executed the following steps:
    1. Create a new Oracle database
    2. Create a datasource to the Oracle database and to Essbase (both tested succesfully)
    3. Create a fresh planning application (I have used a native Admin account and not the original owner)
    4. Go into the database tables for the planning app and look at table HSP_USERS, store the SID value against user 50001
    5. Go into the database planning system tables and HSPSYS_APPLICATION, clear out the version field for the application you have created - I did not do this since I could not delete this value. null is not accepted.
    6. Stop Planning
    7. Restore the planning application database over the one created in the first step (I had to drop the existing tables first)
    8. Go into the HSP_USERS table and update the SID for user id 50001
    9. Start planning
    10. Log on to planning and I did see the webforms, etc as expected.
    11. Now, when I try to refresh the database, I receive an error:
    Cube refresh/create in progress
    Status failed
    Step 4 Adding dimensions
    java.lang.NoSuchMethodError: getAttributeType
    Does anyone has an idea? Hope someone can help me since the deadline is getting closer and closer.
    Thanks!
    Kind Regards
    Martin

    Hi John,
    Thanks for your reply.
    I have exactly done what you have described. I droped the schema and recreated it with an impdp to import.
    But, in the meantime I have been investigating the dimensions and there's indeed something very wrong. Some dimensions have been mixed up. In the 'old' environment I have 10 stored dimensions and 4 attribute dimensions (as well as in EAS as in Planning, offcourse as you expect). In the 'new' environment, two stored dimensions have been mixed up with two attribute dimensions.... How is that possible?
    I have never seen that. Could this be caused by the reason that we use a different version of Oracle (11G release 2 vs 10G (10.2.0.4))? Or went something wrong with exporting the schema...? Can you tell me what I can do to investigate this?
    Thanks!
    Kind Regards,
    Martin

  • Hyperion Planning 9.3.1 "Configure Data Sources" freezes at Essbase conf

    Hi!
    I am setting up a demo environment of Hyperion Planning for one of our customers (my first time installing this application). The platform is Windows Vista Business 32-bit. RDBMS is Oracle 10g on another machine. I've successfully installed Hyperion 9.3.1 Shared Services, Essbase, Essbase Admin Services and Planning application.
    I've successfully configured all the applications (with the Configuration Utility) besides Hyperion Planning. I can access Workspace, User Management Console, Essbase Administration Services (and connect to my localhost Essbase server from there), etc - thus I believe that the installations and configuration of these modules is successful.
    When I try to finish my Hyperion Planning configuration with the utility, the last step is to "Configure Data Sources" (previous configuration steps including "Product Instance Registration" were successful).
    I start the configuration utility, select the properties, enter the Oracle db connection properties (no error there), then enter the Essbase connection properties (the same which enable me to add this server in the Essbase Administration Services, view and start applications, etc) and the installer just freezes.. hangs indefinitely..
    Server: localhost
    uid and password are the ones I provided during essbase installation/configuration
    I've tried this configuration step multiple times, I've restarted the machine. The maximum time I've waited is ~30min.
    Questions:
    # Is it normal for the Essbase configuration page to freeze after clicking "Next" for 30min (maybe I'm just impatient, I'm new to Hyperion)
    # What could be wrong?
    # How could I see the error message - is there an error log somewhere?
    Many thanks for your time.
    Eringmae

    I believe this is the error message:
    Availability Date is 20051231
    Exception in thread "AWT-EventQueue-0" java.lang.UnsatisfiedLinkError: no HspEssbaseEnv in java.library.path
    at java.lang.ClassLoader.loadLibrary(Unknown Source)
    at java.lang.Runtime.loadLibrary0(Unknown Source)
    at java.lang.System.loadLibrary(Unknown Source)
    at com.hyperion.planning.olap.HspEssbaseEnv.<clinit>(Unknown Source)
    at com.hyperion.planning.olap.HspEssbaseJniOlap.<clinit>(Unknown Source)
    at com.hyperion.planning.HspJSHomeImpl.TestEssConnection(Unknown Source)
    at com.hyperion.planning.HspDSEssbasePanelManager.TestEssConnection(HspD
    SEssbasePanelManager.java:156)
    at com.hyperion.planning.HspDSEssbasePanelManager.queryExit(HspDSEssbase
    PanelManager.java:132)
    at com.hyperion.cis.config.wizard.ProductCustomInputPanel.queryExit(Prod
    uctCustomInputPanel.java:114)
    at com.installshield.wizard.awt.AWTWizardUI.doNext(Unknown Source)
    at com.installshield.wizard.awt.AWTWizardUI.actionPerformed(Unknown Sour
    ce)
    at com.installshield.wizard.swing.SwingWizardUI.actionPerformed(Unknown
    Source)
    at com.installshield.wizard.swing.SwingWizardUI$SwingNavigationControlle
    r.notifyListeners(Unknown Source)
    at com.installshield.wizard.swing.SwingWizardUI$SwingNavigationControlle
    r.actionPerformed(Unknown Source)
    at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
    at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
    at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
    at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
    at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Sour
    ce)
    at java.awt.Component.processMouseEvent(Unknown Source)
    at javax.swing.JComponent.processMouseEvent(Unknown Source)
    at java.awt.Component.processEvent(Unknown Source)
    at java.awt.Container.processEvent(Unknown Source)
    at java.awt.Component.dispatchEventImpl(Unknown Source)
    at java.awt.Container.dispatchEventImpl(Unknown Source)
    at java.awt.Component.dispatchEvent(Unknown Source)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
    at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
    at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
    at java.awt.Container.dispatchEventImpl(Unknown Source)
    at java.awt.Window.dispatchEventImpl(Unknown Source)
    at java.awt.Component.dispatchEvent(Unknown Source)
    at java.awt.EventQueue.dispatchEvent(Unknown Source)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.run(Unknown Source)

  • Best Practice for Hyperion Planning : Essbase or Dataform for Adhoc Analysi

    Hi,
    with Hyperion Planning, you are able to start an Adhoc Analysis from an Hyperion Planning Dataform or from an Essbase cube?
    What is the best way / pro / contra ? thanks in advance
    .... I 've juste notice that when you delete the dataform the Retrieve doesn't work anymore :-( .... and with Essbase you get some "un-useful" dimension as HSP_Value
    Regards
    xavier

    A couple of other things that go with Planning as the data source:
    1) You have access to all of the non-Essbase data -- think SmartLists, text (okay, it's there now in Essbase, but not from Planning applications) fields, supporting detail, etc. If you want users to see that relationally stored data, the only other way to get it in Excel is to run a Financial Reports report into Excel (or hack the tables and write SQL to pull the stuff -- did that pre 11x and it's too much work).
    2) There's a performance hit when going against Planning, just like there is when Planning is the data source in Financial Reports.
    Using a form to limit dimensionality - isn't that what SmartSlices are for? I guess it's another way to get to the same place. Although you have to administer the SmartSlices, I would imagine they would break less often than a form might. Having said that, once built, how often do you delete a form?
    It's really nice that ad-hoc analysis from forms are now possible, but I've always thought of it as nice feature to have alongside data entry, never as the primary path into Essbase analysis.
    Just my $0.02.
    Regards,
    Cameron Lackpour

  • Where can I download a trial version of Hyperion Planning and essbase?

    I am new to Hyperion and want to train in it . Where can I download a trial version of Hyperion Planning and essbase?

    Edeliver is where you go to download any of Oracle products. They are not trial versions. They are full versions. The license that you must agree to inorder to download them are for development and self-educational purposes only.
    The main site is
    https://edelivery.oracle.com/
    From there you pick your language, identify yourself, and agree to the license agreement. Then, you select the product pack and OS of host system. Then, select the product you want to download. The products are splitup by component or modules. You must download everything you need. Foundation, Essbase, Planning, and Reporting and Analysis if you are going to do any reports.
    Product pack - Choose Oracle Enterprise Performance Management System
    OS - I use a 64bit OS, but choose the right one that you will be installing on.
    Then choose,
    Oracle Enterprise Performance Management (*11.1.2.0.0*) Media Pack for the OS you choose
    Once you have downloaded the required packs, unzip them all into one folder. Merge the folders together and copy and replace all files. Put a check mark in the box that asks to perform this for other conflicts.
    Once you have all packs unzipped, run InstallTool.cmd
    The documentation zip file can be downloaded from http://www.oracle.com/technetwork/middleware/epm/documentation/epm-096302.html
    Hope this helps.
    Mike
    Edited by: user10224619 on Feb 3, 2011 10:12 AM

  • Hyperion Planning form change not flowing through to Smart View

    Hyperion Planning 11.1.2 and Smaer View 11.1.2.
    I have a user that installed SV yesterday but has been using planning for years. I made a change on his planning form (just added an account) and he does not see this change in smart view. However, he does see the change when logged into Hyperion Planning in his form.
    One strange thing about this is the change shows for all hierarchies except for ones that he has loaded data to. So, for a hierarchy that has no data, it shows the form in SV how it is in planning. If he loads data to the hier, the form automatically switches back to how it was before the change, even when the planning form itself hasn't been changed.
    Here is what we have tried:
    Rebooted machine
    removed user security completely from plannng and added back
    checked for ghost instance in task manager or excel
    Opened new Workbook and opened form fresh
    remvoed connection, closed excel and all instances, new connection and open form fro mblank slate
    Nothing seems to be working. And I see the form how it is in planning. HE does not, he sees it the "old way" and ony for hier points that have data submitted to them. So, literally switches the view based on the POV.
    Any help would be greatly appreciated.
    Edited by: kplum12 on Jun 15, 2012 11:48 AM

    Hi,
    Sounds like in the smart list set up you set "#Missing Data Form Label:" to "Data Form Setting" change it to "Drop Down Setting" and it should be alright.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Hyperion Planning 11.1.2.1 ... changing Years to be tagged as "Time" dim

    I am creating a new Classic Planning application and am looking to do some year over year calculations in the app.  I have successfully created this year over year formula in an Essbase cube by switching the dimension tagged as "Time" to be my Year dimension instead of my Time Periods dimension.
    Is there any way to replicate this change in my Planning application?  I know that if i were to make this change directly in Essbase side of my Planning application that once I refresh the Planning app that it would be back to the way that Planning wants it with Time Periods tagged as Time.
    Is there a setting in the Planning front end that can accommodate this change for a Classic Planning App?
    Any help would be greatly appreciated.

    All -
    I have fixed it and utilized the @SHIFT function in my formula.  Thank you for your replies
    My formula example is
    =IF(@CURRMBR("Years")->"Q1" <> #missing and @SHIFT(@CURRMBR("Years")->"Q1",-1,"FY09":"FY20") <> #missing)
    (@VARPER(@CURRMBR("Years")->"Q1",@SHIFT(@CURRMBR("Years")->"Q1",-1,"FY09":"FY20")))/100;
    ELSEIF(@CURRMBR("Years")->"Q1" <> #missing and @SHIFT(@CURRMBR("Years")->"Q1",-1,"FY09":"FY20") == #missing)0;
    ELSEIF(@CURRMBR("Years")->"Q1" == #missing and @SHIFT(@CURRMBR("Years")->"Q1",-1,"FY09":"FY20") <> #missing)
    (@VARPER(0,@SHIFT(@CURRMBR("Years")->"Q1",-1,"FY09":"FY20")))/100;
    ENDIF

  • Reconfigure issues in EPMA with hyperion products(essbase,HFM,Planning)

    Hi All,
    Reconfigure issues in EPMA with hyperion products(essbase,HFM,Planning,calc manager,etc.,)
    I have created new schema for foundation and one more schema for all other hyperion products and try to reconfigure but i unable to configure and all components are not shown in some hyperion products( in workspace in administer im unable to see classic application, in essbase im unable to see all application...).
    as per my understanding im unable to see *"Registerd with shared services"* for each products in the final stages of configure.
    Please try to know that what may be the cause.
    Thanks & Regards,
    Kittu.

    I can't answer the Import profile, though could you expand on
    mrojik-bubik wrote:
    In planning i was not able to import Security and planning units. Can you please help?Are you trying to import access permissions using LCM ?
    If you are importing security into a target application then I believe that the users will need to exist in the tables before you do so.
    I would run the provisionusers.cmd or go into the planning app and go to provision dimension security and click migrate identities.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Reverse engineer error with Hyperion Essbase and Planning

    We are getting the following error in ODI Operator (3rd step) when trying to reverse-engineer Hyperion Essbase and Planning models. com.microsoft.sqlserver.jdbc.SQLServerException: Cannot invoke a rollback operation when the AutoCommit mode is set to "true".
    Our ODI repository resides in SQL Server.. Any help is appreciated. Thanks.

    Hi Dmitriy,
    You should upgrade to the latest patch of ODI available on metalink.oracle.com 10.1.3.4.4.
    There was an issue in 10.1.3.4 ODI with the intial reverse when using SQL server. If you shutdown all the ODI UI's and then restart. And then reverse it should work correctly. But you have to make sure you shut down all ODI tools.
    Thanks,
    Denis

  • Hyperion Planning hypadmin password change?

    Experts and or knowledgeable hyperionites,
    I am being asked to reset the Hypadmin password for our Hyperion Planning system. I am new to Hyperion and baffled at where to even start. Can anyone help in finding all the locations where this password might be and what changing the password will do? Even if all you can provide is a few steps or point in the right direction I would be most appreciative of your assistance.
    Thanks,
    Matt

    Hi CJ
    Changing password is simple but do evaluate the impact. You need to update password everywhere in your ODI packages, Backup scripts or any other automaiton if you have used. We have faced this issue , once we changed the admin password and updated everywhere only EAS was not able to authenticate the admin user account.
    update CSS_USERS set PASSWORD= '{SSH2}mpQoG4jU00otFocLZM6CWWUzpk9ZmSY5In3l3ZzFCH5byRhkG6ow7z4KxXmXWXSo' where name='admin';
    This will setup the admin users password to ‘password'

Maybe you are looking for