Making changes to view of comp A must reflect in comp B too

Hi All,
           I have a requirement where the overview page is CPG_MAIN/OPOverview and it has two assignment blocks
1)CPGOE_ABLOCKS/OVELProducts - Products assignment block
2)CRMCMP_CND/CONDRECLIST      -   Discount assignment block
        If ever we delete the product from the discount assignment block it must delete the same product from teh product assignmetn block too . At the moment i am using a global variable to pass the product ID which must be deleted . But could anyone help me as to how i could call the CPGOE_ABLOCKS/OVELProducts view and make changes in it ?
Any other alternative to get the required functionality is also helpful.
Thanks in advance,
Mithun

Done by using DO_PREPARE_OUTPUT

Similar Messages

What type of add on can I download that will allow meto change the view of my emails in gmail? I would like to have them split view like outlook

What type of add on can I download that will allow meto change the view of my emails in gmail? I would like to have them split view like outlook

Dear Sara,
I notice that you didn't reply to my questioning the this ambiguous stipulation of your services being extended to Adobe's rights in the use of my personal content or intellectual and creative property.
When I returned to my "files" section in Adobe Reader where they were transferred to in converting them to PDF they had all been removed. Around 6 projects in progress plus notes and several creative design images in one instance (attached to a writing project). I have access to the files and I am downloading Cloud desktop interface.
Does the interface of Reader in desktop automatically remove them from my online account, making them exclusively offline from here on OR must they be physically removed and so have they been removed by another party?
Finally, since they are made copyright in the conversion, must future files be made uploaded to signify and account for them as made copyright by the process record in my personal account?
Excuse my asking lots of questions. My work has been tampered with in the past and I am excited about this service I can avail of in protecting all of my work.
Yours Sincerely,Liam Anthony Dalton BA, FA

Change Smart View default colours for all clients

I need to change Smart View default colours. But it must be done in a centralized way, so I can not set it up at the client level. I'm not sure if Smart View takes defaults from planning.css styles, or if they're defined somehow at the provider, or maybe specified in client installer.
Thank you in advance for any guidance on this.
SD

SD,
You may want to work with Oracle SmartView Support, to see if / how it is possible for SmartView, using a Service Request.
Thanks!

Feature request: View layer comps in both Comments and Extract

Good day,
I'd like to see the layer comps dropdown duplicated and applied to the Comments panel of Extract, in hopes that when viewing layer comps over the web, there's better, faster performance when reviewing comps. Extract is wonderful, but not everyone on my team needs the tools it offers (just developers, really). Everyone on my team does need to view the layer comps, making the comments section an appropriate home for it.
Note: I'm not suggesting moving layer comps from Extract to Comments. Please make layer comps available to both.
Thanks for reading,
-Brent

Hi John,
I visit there for other product feature requests quite often. It unfortunately does not offer Creative Cloud as an option from it's dropdown.
Perhaps I should request that feature?
-Brent

Making changes in Mail

making changes; delete, move to iCloud folder, etc.; in Mail with Mountain Lion has no effect; must use iCloud webpage to make changes. Didn't have this problem with Lion.

didn't change any setting/preferences in Mail.
Mail works correctly on wife's MacBook Pro
Do your settings correspond to your wife's under each of these three tabs in Mail Preferences? (The first few characters in the Incoming Mail Server address may be slightly different.)
Have you checked your Mail preferences at icloud.com to make sure iCloud isn't moving your messages locally?

Disco Plus - hangs when making changes to reports with lots of worksheets

Have run into this several times and the problem seems to go away sometimes on its own and then reappear at a later date.
Have a report that contains 11 worksheets. Can run any of the worksheets with no issues. However, when making a change to any worksheet, Disco hangs on the edit screens and I eventually receive the message "Contact with the Discoverer server has been lost. To continue your work, please restart Discoverer Plus. If this problem persists, please contact your Oracle Application Server administrator" I have tried restarting Disco Plus several times over the course of several days and still the same issue. I have no problems making changes to this same report through Disco Desktop.
I have also tried moving out the individual worksheets from this report as separate reports and they work fine and can be updated with no issues. This seems to only be a problem when there are many worksheets within 1 workbook.
Would appreciate any assistance.
Disco Plus 10.1.2.54.25
Stephanie

Hi Stephanie,
We have 30,000 employees in our company so i sympathise completely!
You shouldn't need to separate each worksheet and make the change separately. The problem we experience is only in Discoverer Plus. I think it has something to do with the memory allocation on the server, which Plus must use. In Desktop we've found that reports like that are fine. They may take a while to save but in terms of editing reports its ok, because the memory on the machine is being used. If you're having problems in Desktop i'd check your PC spec.
I wouldn't say its a program error, not enough memory on the server more like, particularly as you're saying that sometimes you can't do anything and then other times it all works fine. Have you got lots of Discoverer Plus users in your company? If so try coming into work a little earlier and try it then or at the end of the day. If lots of people are running reports its going to slow down.
It could also be that the DBAs haven't allocated enough memory as DBAs generally don't like Discoverer. They love to blame database/server performance problems on Discoverer. We proved them wrong. On one occasion they blamed a major outage on a report that I was running. It was a big report. But they ran traces, plugged in their diagnostics stuff and got me to run the report. It showed up as this tiny blip, they were so embarassed!!
They just need to intelligently configure stuff, build a good data warehouse etc. I use the word stuff because I don't really know much about servers, warehouses, LPARs etc etc. I do think that quite a few DBAs don't embrace Discoverer because they see it as a hindrance to their jobs. If I was keeping a database up and running I wouldn't want cheeky business users 'playing around' with massive data extracts on my turf!
We have found that sometimes its easier to write a report from scratch in plus than editing it. When you make a change it takes longer to apply it, especially when adding a sort or changing formats. The annoying thing about formatting for us is that we have to use corporate colours, and desktop doesn't do hex values so all our formatting is done in plus.
Regards,
Lloyd
Edited by: Lloyd T on 24-Feb-2009 13:22

Change default view across multiple page libraries using the same content type/types?

I am the editor for a large SharePoint publishing site with approximately 130+ subsites. Based on our content, I've create two diffferent default views that will come in handy as we move to a distributed authorship model. (I'm thinking specifically about
the Quick Edit/Excel-like feature to make quick changes to page/document metadata.)
The authors/content owner/editors have NO experience with SharePoint, so while the benefit of using views is that they can be tailored to individual needs, I'd like to start them off with something that is VERY easy to change on the fly. It's either that
or, as just a power user in the CMS, go to each individual page and document library and change it manually, which could take days, if not longer. Thanks!
Ryan D Watters

Essentially, yes.
That said, I am using SharePoint 2013, and I just now realized that I posted this in the legacy SP forum. You'll have to excuse me -- this is my first time posting:)
Basically, I have two different "ideal" views based on two different site templates. These two site templates account for over 100 publishing subsites. The view has 18 different metadata that will make editing/making changes to article pages much
easier for content owners because they will be able to go into the page libary>ribbon>library>quick edit and edit the metadata as if it were an Excel spreadsheet. This comes in especially handy for things like rollup order between primary, secondary,
tertiary pages within a subsite. Ideally, it would be nice to be able to add that view as an option within the CMS (similar to the way you can add a view style).
I hope that makes sense. Also, I'll repost the question to SharePoint 2013. Much appreciated!
Ryan D Watters

Please change the view in the top sites, the 6.1 upgrade has reverted back to a plane two dimensional view, which is a little plain. Can I revert back to an older version via my time capsule save?

Please change the view in the top sites, the 6.1 upgrade has reverted back to a plain two-dimensional view, which is a little dated. Can I revert back to an older version via my time capsule save? C'mon Apple upgrades supposed to leap into the future not the past. :-(

Please change the view in the top sites, the 6.1 upgrade has reverted back to a plain two-dimensional view, which is a little dated. Can I revert back to an older version via my time capsule save? C'mon Apple upgrades supposed to leap into the future not the past. :-(

Views for list web parts. Is there a way to allow users to change the view for a list web part without being redirected?

Hi,
I added a list view web part into a SharePoint 2013 page and it is working as expected, except for one thing.
I have enabled the option for the user to change the view for the web part. However when the user changes it, the user is redirected away from the page containing the web part, to the URL of the list itself.
Is there a way to circumvent this issue so when the user selects a different view it updates the listing in the web part itself, rather than the user being redirected?
Thanks in advance for the help.
Regards,
P.

Hi,
Please understand that one page can only display one view. You could find it out by observing the Address in browser when switching among different views for a list.
If you would like to change the view of a list web part, you could go to web part propertites > Select view and configure it.
In addition, here is a thread with similar requirement that might help:
http://social.technet.microsoft.com/Forums/en-US/18dba190-5ee2-4b50-b005-1360d862f4ba/how-can-end-user-change-the-view-in-a-list-view-web-part?forum=sharepointgeneralprevious
Regards,
Rebecca Tu
TechNet Community Support

How to change the profile value in the pl/sql code without making change in the database

How to change the profile value in the pl/sql code without making change in the database.

I have program ,where if the profiles 'printer and nunber of copies ' are set at the user level, by default when the report completes the O/p will be sent to the printer mentioned in the set-up. but what user wants is
if these Profiles are set for the user running this program automatic printing should not be done.

I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(114957)

How to change the view criteria at run time for af:query

Hi,
I've a usecase where I need to change the view criteria of the af:query at run time.
Use case:
=======
1) Consider a check box (Show Emps Under Dept 10) in the query panel when user selects and clicks 'Search' button should show the employees under dept 10. If user searches without selecting the check box, the results should show all the employees in all the departments.
2) I need to have a check box always in the query panel. Its mandatory.
The way I implemented:
==============
1) Created a transient variable 'Show Emps Under Dept 10' in the EmployeeVO and also created a bind variable bind_DeptNo.
2) Create a view criteria 'AllEmployees' which has only the transient attribute as the view criteria item and whose value set to 'false' by default.
3) Created another view criteria 'EmpUnderDept' which has 'DepartmentId' as the view criteria item and whose value set to the bind variable 'bind_DeptNo'.
4) Dropped the view criteria 'EmpUnderDept' as the 'af:query' panel in the jspx page.
5) Overridden the queryListener as '#{EmpBean.empSearch}'
6) Has the below code in the empSearch method as below. When user selects the check box, applying the other criteria 'EmpUnderDept' and setting the bind variable to '10'.
public void empSearch(QueryEvent queryEvent) {
// Add event code here...
QueryDescriptor queryDesc = (QueryDescriptor) queryEvent.getDescriptor();
ConjunctionCriterion conCrit = queryDesc.getConjunctionCriterion();
List<Criterion> criterionList = conCrit.getCriterionList();
List criterionValues = new ArrayList();
Object criteriaValue = null;
int criteriaNo = 0;
DCBindingContainer bc = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
FacesContext facesContext = FacesContext.getCurrentInstance();
for (Criterion criterion : criterionList) {
AttributeDescriptor attrDescriptor = ((AttributeCriterion)criterion).getAttribute();
System.out.println("============== attrDescriptor.getName() =================== " + attrDescriptor.getName());
criteriaValue = ((AttributeCriterion)criterion).getValues().get(0);
if(criteriaNo==0) {
Boolean val = (Boolean) ((AttributeCriterion)criterion).getValues().get(0);
if (val.equals(true)) {
OperationBinding method = (OperationBinding) ADFUtil.findOperation("ExecuteWithParams");
if(method!=null) {
Map params = method.getParamsMap();
//params.put(key, value)
method.getParamsMap().put("bind_DeptId", 10L);
method.execute();
ADFUtil.invokeMethodExpression( "#{bindings.EmpUnderDeptCriteiaQuery.processQuery}", queryEvent);
} else {
//ADFUtil.invokeEL("#{bindings.ExecuteWithParams.execute}");
ADFUtil.invokeMethodExpression( "#{bindings.AllEmployeesCriteriaQuery.processQuery}", queryEvent);
But this approach is not working and its always showing all the employees in all the departments.
Please let me know if there is a way to change the view criteria at run time depending on the values set at run time for one of the view criteria items.
JDev version am using is '11.1.1.5'
Thanks,
Lakshman

Hi Shay,
It worked for me without overriding the executeQuery() method in the ViewImpl.java.
Instead of creating 2 view criteria, I created only one which has both transient variable and the DepartmentId = <bind_DeptId>. With the above code, it worked properly. Now I am using only one view criteria.
Thank you.

How can I batch change the view options of multiple playlists?

I would like to select multiple playlists and batch change their view options; seems like an obvious feature that should be there, but it does not seem to be there. I know of Assimilate View Options v2.2 in Doug's AppleScripts, but this is not what I want, since AWO requires you to do the change playlist by playlist, i.e., not in batch mode (and I have hundreds of playlists ...). Any idea? Please answer privately at [email protected] since I do not read this forum regularly. Thanks in advance for your help!

did you also check out the following script ?
[_*Change Hidden iTunes Preferences v2.4*_|http://dougscripts.com/itunes/scripts/ss.php?sp=changehiddenprefs]
This application will allow you to invoke hidden iTunes preferences:
Show "Library" playlist
*Changing view setting is global*
Allow half-stars in ratings
Hide "Ping" buttons
Show/hide arrow links -- to either search the iTunes Store or search your library
Load complete iTunes Store preview before playing
Create playlists for purchased song collections
Play songs while importing or converting
Create file names with track number
Maintain grid view for Search results
Option-click zoom button for Mini Player
Show buttons horizontally

Can you change the view of album covers when playing music on Apple TV?

I love the coverflow view when playing tracks on my mac. Its what I always wanted to be able to see the album cover as large as the screen while the song plays.
However on Apple Tv its "not quite" the same!
I feel that the text is too big (taking up half the screen) and although the album cover takes up the other half, the text and album cover keep switching sides of the screen every 10 seconds or so which i find a little annoying! Does anyone else find this annoying or just me?
Of course I love my mac and apple TV however i cant find a way to change this view when music is playing. I would like coverflow on apple Tv just like on mac. A full screen showing the album cover, with smaller text to show artist and track and not to switch sides of the screen!
Does anyone know what im banging on about and can you help!

Oh dear! but thank you for a quick reply and your kind welcome!
I thought the side to side motion would be to protect the screen somehow but i dont really like it!
Not at all relaxing when playing a soothing song to see the graphics flipping back and forth.
Its great technology, amazing, but could this viewing option be changed somehow by the wizards at apple.
I might need to hit the off button on Tv and just listen on speakers otherwise.

When I open ical, the calendar looks like an old desk pad vs what is in the manual. How do I change the view (not month, day, week), but the background presentation?

When I open ical, the calendar looks like an old desk pad vs what is shown in the manual or on-line tutorials. How do I change the view (i.e. background) not the month/day/week view but the background template? The default in the manual is good. Software is current - Lion.

Kelly,
Try: MacNix: Change Mac OS X 10.7 Lion iCal and Address Book Skins from Leather to Aluminum.

Making changes to view of comp A must reflect in comp B too

Similar Messages

Maybe you are looking for