Making changes to web access phone setting CUCM 8.6.2

Hello,
I have a question on a change I need to make on our Call Manager. We use the Berbee Informacast product for emergency notification. It requires that the Web Access parameter be enabled on the individual phones in order to send audio broadcasts. I have learned that after a certain version of CUCM (8.6 perhaps) this setting was set to disable by default on the Enterprise Phone Configuration section on CUCM. We have had this version running about a year now and many many phones have been installed since then. These phones have the web access disabled I believe because of this being disabled on the server settings side. My question is this...
Would it be better to go into System > Enterprise Phone Configuration>Web Access setting and set to enable
or
Do a bulk edit on all phones to enable, reset phones.
What I am not sure about also is if I change on the system side if it will automatically update and reset phones.
Just not clear on the right path to take on this...
Any ideas?
Thanks,
-Nick

Thanks for the great info. This is what I did.
Changed web access to enabled in Enterprise Phone Configuration. Clicked Ok, manually rebooted a couple of phones with no web access. Still didn't work.
Changed web access to enabled in Device>Device Settings>Common Phone Profile>Standard Common Phone Profile. Clicked Save and rebooted the same two phones. Worked great.
Ran job scheduler to reboot all phones (1600 of them) and all seems to be good now.
Thanks again Chris!

Similar Messages

Making changes in web.xml dynamically

Hi all,
I have a requirement in which i need to redirect request to com site if it is from desktop browser and to WAP site if request for wap site or from a mobile device
Have servlet ready doing it but presently taking only to two harcoded URLS of .com and .mobile sites.in web.xml.
Now i want dynamic changes in web.xml through a servlet to changes those URLs to respective request.
Thanks in advance,
dcosta_halo

The web.xml file is only a data storage file. When a Java Web Server starts up, it read the web.xml file and creates the appropriate objects that live in the JVM and manage parts of the applications hosted by the server. Any changes to the web.xml data file while the server is running are lost once the server is turned off. You need to figure out another design, possibly having the servlet read a database table to get URL strings.

Viewing ical in .mac-making changes from web

Can anyone answer definitively the following:
Can one's iCal be viewed at one's .mac account page, or does one need to "publish" it to the web?
If the latter, is it even viewable from one's .mac account page?
If "publishing" is necessary for remote viewing of one's iCal, can one alter it remotely (via .mac or the web from a computer other then one's own)?
Apple's comments on all this are curiously vague.
Thanks.
emac Mac OS X (10.4.4)

cue,
1. Your iCal data is not viewable from the .mac page.
2. When published, it must be viewed at the following URL> http://ical.mac.com/yourusername/yourcalendarname
3. Publishing changes must be made from iCal on the original host computer, except that another Mac which is synced through .Mac could make changes if authorized.According to iCal Help...Synchronization is the process of updating information on different computers or devices so that all copies of your files contain the latest changes. For example, if you have calendars on more than one computer, you can synchronize them so that each computer has the latest information.
If you have a .Mac membership, you can synchronize your calendars across multiple computers via the Internet. To synchronize calendar information on your computer, mobile phone, Palm OS device, or iPod, use iSync (in your Applications folder).
;~)

Exchange server 2013 change to web access url

I have install & configure exchange server 2013 in my local pc. my ip address http://192.168.0.30/ecp but not access http://mail.test.com/ecp. and till i have purchased one mail so till i wants to my mail server access (send and received mail all mail
id public and private) please send configuration url.

hi pardeep not sure if i understood well.. you have private IP and you want to do send receive.. is that.. for the test you can do it but almost 90% or more, your mails will be sent to SPAMS.
so if this is a test environment you can give a shot. let me know what kind of config you are looking for. below link will cover the config of exchange 2013. Let me know if you need more help.
www.techieshelp.com/exchange-2013-step-by-step-configuration/
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin

Windows Home Server 2011, How to Turn off Remote Web Access for Dashboard completely?

I have a Dell Server at my House and i thought it would be a good idea to use it to run a website on so, i set up Apache and get it installed. But then every time I type http://localhost/ it would always Come up with the remote web access! So i thought
ok no problem you can disable that in Dashboard. Well i was wrong when i typed http://loacalhost/ it came up with the Proceed Anyways option but sent me to a Big
Bad GateWay. So what im trying to get at is i need to Fully Disbale that Remote Web access or Set a specific Port so it does not interfere with port 80. So does any one know how to fix this or get rid of this issue?

This one may help.
http://technet.microsoft.com/en-us/library/remote-access-overview.aspx
I'd ask them more over here.
http://social.microsoft.com/Forums/en-us/home?forum=whs2011
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(114957)

Web access to ip phones is not working although it is enabled on CUCM

Dear All,
i enable web access for ip phone ,but still not able to access the phones through web.
Regardsm
Moath

What call manager version are you using? If you're on 8.x there is security by default and if you're on an older version it's possible you have security enabled (CTL files) which would be causing your phone not to trust it's TFTP configuration file, which is where the web access setting is passed to the phone. If you look at Settings > Status Messages on the phone do you see anything such as trust list update failed? If you see that it's likely an ITL file issue. If you go into Settings > Security, and delete the ITL from the phone it will download a new one automatically from your TFTP server. Once the ITL is correct the phone should trust the TFTP configuration file and update the web access setting on the phone.

Disable phone Web access ..

Hi,
we are using UC560 for IP Telephony system and i received complain from end users about that any user know the IP address of IP phone he can access it through the web and view all call history as dialed calls or received calls.
so i need to disable phone web access to protect end user privacy .
kindly advice .
Moe

Hello Moe,
Just to add to what John said there is a technical mistake to stop the web access to the phone you need to enter the following on the UC:
Telephony-service
Service phone webAccess 1
Create cnf-files
For SPA phones you may try the following:
Cisco SPA303, Cisco SPA500 Series
To allow or disallow from the phone viewing of the phone web user interface:
STEP 1 Press the Setupbutton.
STEP 2 To display the Web Server Writable option either:
• Select Network> Enable Web Server.
• Select Settings> Security Configuration> Web Access Enabled.
NOTE This option is available in SPCP mode only.
STEP 3 Press Edit to change the status of the Web Access Enabled parameter.
If the option to edit the parameter is not displayed, press **#to display the option.
If the edit option still does not display,it might be set by your phone system
administrator such that you cannot modify this parameter.
STEP 4 Press Y/ N to toggle the parameter and press ok to set the parameter.
STEP 5 To save your change, press save.
HTH,
Alex
*Please rate helpful posts

How do I change the URL to the Remote Web Access server in Windows Server 2012?

Hallo!
I have set up a Remote Dexktop Service using the "Quick" deployment method in Server Manager and everything is working greate internally, but I cannot start an app published in Remote Web Access from outside our network.
The problem is that it wants to start the using the internal URL, for example, server.domain.local, instead of the external one, for example remote.server.com.
I therefore want to know how I can change the default URL for the Remote Web Access server and all the Remote Web Apps in Windows Server 2012?
I have allready looked in Server Manager and I can change some of the deployment settings in server manager, but there is no way to alter the URL of the Remote Web Access server. See below images:
Pressing the internal URL only results in opening the internal URL.
This was very simple to do in Windows Server 2008 R2 using the tsconfig tool, but it does not seam to be any way of solving this in server manager.
A possible sollution would be to alter the registry someware in HKLM->Software->Microsoft->Windows NT->Terminal Services. But this can easaly lead to problems due to wrong format, etc. and is probably not supported.
Is there a simpler and supported way?

That option can be used to connect to any machine that you want. The error message indicates that the client machine cannot resolve the name "server.domain.local" to an IP address that it can connect to.
You have several options for configuring that tab on the RDweb site. You can even remove it entirely.
Customization of RD Web Site
RD Web provides a number of customization options for the RD Web interface, including the ability to control default Gateway server settings and redirection settings. These settings
are controlled by editing the web.config file located in %SYSTEMROOT%\Web\RDWeb\Pages.
Displaying Local Help
To display local help for users instead of the web-based help, edit the LocalHelp value and change the value from false to true.

<add key="LocalHelp" value="false" />
When this value is changed, a user that clicks on Help in the upper right corner of the RD Web login page will open the local help file instead of web-based help.
Hiding the Connect to a Remote PC Tab
The RDWeb page
Connect to a Remote PC tab can be hidden from users to prevent connections to any servers through RD Web other than the servers configured in a collection. By default, this setting is set to true and the
Remote Desktops tab is displayed. To hide the tab, set the value to false.

<add key="ShowDesktops" value="true" />
When the value is set to false, a user will not see the Connect to a Remote PC tab when logged on to the RD Web page
RD Gateway Settings
If the Connect to a Remote PC tab is enabled, an administrator can configure RD Web to use a Gateway server when connecting to remote computers. To specify a gateway, edit the below
value with the name of the RD Gateway server:

<add key="DefaultTSGateway" value="" />
The default authentication method for the RD Gateway server can also be configured by editing the following section of the web.config:

<add key="GatewayCredentialsSource" value="0" />
Devices and Resources
By default, only Printers and Clipboard are redirected on connections made using the Connect to a Remote PC tab. If the user clicks the
Options << button, the redirection settings for a specific connection can be modified
To configure each specified redirection option to be enabled or disabled by default, edit the following section in the web.config file:

<add key="xPrinterRedirection" value="true" />
<add key="xClipboard" value="true" />
<add key="xDriveRedirection" value="false" />
<add key="xPnPRedirection" value="false" />
<add key="xPortRedirection" value="false" />
LAN Experience Defaults
Windows Server 2012 RD Web Access can display a new user selectable option for optimizing the connection for a LAN experience. This option is displayed at the bottom of the RD Web
page and can be controlled by the administrator using the following section of the web.config file:

<add key="ShowOptimizeExperience" value="false" />
<add key="OptimizeExperienceState" value="false" />
This value is set to false by default, but when changed to true, the following checkbox will display at the bottom of the webpage. The LAN experience
checkbox can also be set as enabled by default.
Each setting can also be modified using the IIS Manager user interface:
Don Geddes - SR Support Escalation Engineer - Remote Desktop Services - Printing and Imaging

I'm using firefox 6.0.2 It's making problem with Bangla font ONLY on FACEBOOK others bangli website FORNT SIZE are OK. On the FACEBOOK it shows Bangla font in a very / Too small! I change font SIZE in firefox setting but i can't solve. Pls HELP me

I'm using firefox 6.0.2 It's making problem with Bangla font ONLY on FACEBOOK others bangli website FORNT SIZE are OK. On the FACEBOOK it shows Bangla font in a very / Too small! I change font SIZE in firefox setting but i can't solve. Pls HELP me ..

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Ip phone web access does not working

hello, everybody!
need assistance.
I have CUCM 9.1 with demo licences.
I have some phones - 7911 and 6921 - registered.
I have enabled Web Access feature on all phones.
but don't have web access.
any suggestions?

Hi Sergey,
I overlooked it when webaccess is enabled I see <webAccess>0</webAccess> when it is disabled><webAccess>1</webAccess>. So for your case webaccess = 0 is good, that means it's enabled.
Can you ensure you have right device pack installed which is compatible with your phone firmware.
Check below link for more details
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/compat/matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix_chapter_01.html
HTH,
Regards,
Mohammed Noor

When using Firefox to access my Lotus Notes webmail account, I cannot attach files. The following error message appears: Domino Web Access Warning. What settings do I need to change or how do I fix this?

When I try to send an attachment in my Lotus Notes webmail, a Domino Web Access Warning appears. What setting do I need to change or how do I fix this? I just switched from Internet Explorer to Firefox 2 days ago. Thanks
== This happened ==
Every time Firefox opened
== When I switched from Internet Explorer to Firefox

Idem for me

Customizing Oracle Web Access Client password change

We need to turn off the built in Password Change feature in the Oracle Web Access Client of Collaboration Suite or, an even better option, redirect it to our custom built change password application. It appears in the client under Preferences in the same pop-up window as General and Time Zone. We've been poking around in the file structure and trying to find what renders this page. Can anyone offer any help?
Thanks.
Troy

Hello,
You can't do that in WAC but in the Webmail interface > Preferences > Account > Folders you can set this for Oracle Mail.
Hope it helps.
Irina

How can you change your line access selection? I have found where you can change your plan selection, but can you change the line access fee or is that a set amount?

How can you change your line access selection? I have found where you can change your plan selection, but can you change the line access fee or is that a set amount?

DIVAB71,
Great question. The line access fees for the account are a set amount and can not be changed unless you are going from a basic to a smartphone or vice versa. If you are wondering about adding the month to month discount if you are out of contract Ann154 has provided great information on how to access and add the feature.
LindseyT_VZW
Follow us on Twitter @VZWSupport

Problems setting up Remote Web Access in Windows Storage Server 2008 R2

We just bought a WD Sentinel DX4000 Storage Server and went through the Remote Web Access wizard. It setup the router just fine but when we got to the setup your domain name we have been having
headaches ever since. We chose the option to use our own domain name, which we have registered through GoDaddy. It then showed that yes, our provider was GoDaddy but then it told us we needed to update our service with GoDaddy so we clicked the
"Go to GoDaddy.com" button and it sent us to a page to purchase an SSL certificate. So, we did that but then had issues with it not being able to be managed in our GoDaddy account. So, I went into the domain name with GoDaddy and purchased
a certificate there and got it setup on the domain name with GoDaddy.
The problem is that when I try to go through the wizard again to set up the domain name I still have to click the goDaddy button to move to the next page where I type my domain name, username, and password
with GoDaddy. I setup the remote extension in the A records with GoDaddy as remote.mydomain.com, and put in my username and password with GoDaddy. After I click next it tries to connect to the domain name service provider but then gives me the
following error message over and over:
The domain name was not set up for your server. Wait a few minutes and run the wizard again.
An unexpected or unknown problem occurred. Please wait a few minutes, and then try again.
Well, I have tried this several times and am about to start pulling my hair out. Can anyone please tell me what I may be doing wrong?
Thanks for any help you may be able to provide.

Hi,
Please verify the installed certificate status, you could refer to the article below to install GoDaddy SLL Certificates.
Installing a GoDaddy Standard SSL Certificate on SBS 2008
http://sbs.seandaniel.com/2009/02/installing-godaddy-standard-ssl.html
Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
There is a similar thread, please go through it to help troubleshoot this issue:
SBS Essentials 2011 Domain Name Wizard Fails
https://social.technet.microsoft.com/Forums/en-US/6644ec25-3071-4526-b878-9d6977589f88/sbs-essentials-2011-domain-name-wizard-fails?forum=smallbusinessserver2011essentials
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Making changes to web access phone setting CUCM 8.6.2

Similar Messages

Maybe you are looking for