Making Container have a rounded top left cormer shifts Table inside to right. How to solve this? I have ID CC 2014 (64bit) for PC
Left image shows Shift to Table. Right image shows what I want.
Tables are text, as far as ID is concerned, and they have a square corner, so they have to shift. You'll have to create a new round-corner frame with stroke, then Paste Into that frame the text frame that holds your table.
Similar Messages
-
Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error , i try to restore with itunes restore mode and throws me error!, could anyone help? I'm going crazy!. Thank you!
This is the mistake That I get up the logo and then reboots iphone and Continues to Appear;
(NAND) _findflashmediaandkeepout: 601 physical nand block offset 1
(NAND) start: 356 this 0x96959400 PROVIDER = 0x96b1de80 falshmedia = 0x96b1de80
(NAND) WMR_Start: 149 apple PNN NAND Driver, Read / Write
(NAND) WMR_Start: 174 FIL_INT (OK)
(NAND) WMR_open :371 vfl_open (ok)
(NAND) s_cxt_boot:88 sftl: error, unclean shutdown; adopted 7775 spans
(NAND) WMR_open:420 FTL_open (ok)
(NAND)_publishServices:642 FTL capabilities: 0x00000001
(NAND)_ppnvflGetStruct:3469 checking borrowed blocks-count:23 max_count:23
(NAND)_fetchBorrowedList:881 number of borrowed blocks 16Hi Guys!
I'm German, so my english writing might not be perfect
I had the same Issue on a 5 i bought. Exact same screen and writing. Battery was totally drawn, first thing I had to replace. The screen had been replaced and since then it wouldn't work anymore according to the previous owner.
It took me a couple hours, after recieving a few errors like 4013 it just never completed the restore, got really hot as well. The Flexwire of the Dock Connector seemed damaged, replaced the dock, but that didn't help.
I almost gave up, thought the Logic Board was bad.
BUT! Then i deceided to check if it has anything to do with the Screen assembly, and it did.
Long story short, on mine the front facing camera, and sensor assy were bad.
Anyhow, the phone works ''perfect'' when i leave them unplugged. So I just ordered a new one and we will see if thats the problem or if the damage is in the Logic Board.
If so, i can live without the sensor and front cam.
Just wanted to share, good luck everyone. -
Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!
Go to Settings/General/Reset - Erase all content and settings. the connecto to iTunes and restore as a New phone. Do not restore any backup. If the problem persists you have a hardware problem. Take it to Apple for exchange.
This assumes that the phone is not hacked or jailbroken. If it is you will have to go elsewhere on the internet for help. -
Does anyone know how to solve this problem: I a trying to download a paid app but I cannot because the AppStore says that info not have enough space to download it even though I have more than enough space so if any of you know what can solve this problem then please let me know
The app is compressed and needs swap space to install. As a rule of thumb you need 3 times the listed size of the app available, or in your case 4.6GB. You only have 1.7GB.
-
Get error message when syching iPod, iPod cannot be synced. You do not have enough access priveleges for this operation. How to solve this?
Hello FranBNYC
It sounds like a permissions issue with your library, check out the article below to check and make sure that things are set correctly.
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/ts1387
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I'm using windows 8 on my pc, and i have just downloaded the latest version of itunes, after i upgraded the latest version of itunes, it can't detect my iphone, but my windows/my pc does. Anyone knows how to solve this problem?
Hi jstutsman,
If you are having issues with your iPod nano not being recognized in iTunes after a recent update, you may find the steps and links listed in the following article helpful:
iPod not appearing in iTunes - Apple Support
Regards,
- Brenden -
I have a problem in my iphone 4 with wi-fi after update to IOS6 please can help my how can solve this problem?
Nope
One needs to press the home and sleep / wake keys together for the phone to reset
The other thing I could recommend
Let the battery run out and the phone completely "die"
It may take a day or two with it not being used
Then plug it in to charge and see if there is any change in behavior
If you cannot get this to work - you may need to bring it to an Apple store -
I have an imac osx 10.5.2 from about five years ago and recently my flash player stopped operating/responding. Does anyone know if I have to install a new flash player? I have attempted it several times and it won't let me. I would appreciate any suggestions on how to solve this problem. Do I need a new operating system?
Why have you not updated to 10.5.8?
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later: -
Hello
THIS IS RAZA
I GOT A MACBOOK PRO
I HAVE A PROBLEM. PROBLEM IS how to solve this problem i have uploaded in .... all the time few days later on i face this problem in safari..... anyone can help me please.....thanksThis is a scam. Do not phone these people, at best they will charge you for unnecessary 'cleaning' and at worst they will gain access to your Mac and steal your data. You've probably managed to install some 'adware' which is producing this fake warning. 'Adwaremedic' should remove it and is safe to use - please see
http://www.adwaremedic.com/index.php -
I see that many people have already complained about Itunes' backup encryption. I NEVER set a password for it (and the corresponding option is still unticked, as always) yet it asked me for a pwd when I upgraded my 3GS to the 5.0 OS. How to solve this?
To prevent others from reading your mail, don't give them access to your account. If others need to use your computer for some reason, set up personal accounts, or a guest account, and switch to it before allowing them access. This is the simplest, and most effective, method.
Email message files can be read as plain text in TextEdit or any word processor.
To protect your email messages from being viewed by others while in your account, you would have to lock the folder, putting it into an encrypted disk image that required a password to be opened and mounted. You would have to double-click on the image and give your password to mount it before launching Mail then unmount it as soon as you're done. My guess is that you could replace the ~/Library/Mail folder with an alias pointing to the folder on the disk image.
It may work, but it seems like a lot of unnecessary hassle. -
I have a 4th gen nano that is loaded with my music library via a prior addition of Windows. I now have Windows 7 and when I access I-tunes and plug in my Ipod I get a list of my music but cannot play it. Open to suggestions on how to solve this this problem.
You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them. -
Hello, I have transferred my Acrobat XI Pro from old MAC to the new one. After the transfer can not open any PDF file. Any idea how to solve this?
Hey ilyaz20360341,
Could you please specify how exactly did you transfer Acrobat from one MAC to other.
You might need to deactivate the software from your old machine and then activate it on the new one with the same serial number (for Acrobat license) or Adobe credentials (for Acrobat subscription).
If you have done the same way, then let me know if you are able to open Acrobat itself.
Do you get any specific error message while opening a PDF?
Hope to get your response.
Regards,
Anubha -
My computer sees the auto duplexer on my Epson Stylus PX720WD but iworks says it is not installed. I have contacted Epson and I have the impression that they don't know how to solve this problem. Anyone got any ideas?
If you print to PDF first, and then print it from Preview does it work?
-
My iPhone is a iPhone 3GS. For some reason, the ringer becomes silent although I have put the ringer on full volume. Would someone kindly teach me how to solve this problem? Many thanks!!
Just to make sure... you have the phone in ringer mode right? Sometimes the switch on the side gets bumped (especially if you don't have a case on the iPhone) and goes into silent. If you see a orange line on the switch - it's on silent.
If the switch is fine (and isn't loose or anything) try restoring the iPhone in iTunes. -
I have problem c connecting to cellular data network. There is massage "couldn't activate cellular data network, PDP authentication failure". What is it and how I solve this problem?
If you have a data only plan for the iPad with your carrier, if no change after powering your iPad off and on you will need to contact your carrier.
Maybe you are looking for
-
Multiple day events showing on month view
Hi, Anyone know how to make events that span multiple days show up on the monthly view? In week view it will color all of the days, on monthly it is only listing it on the first day of the event. The only way I've gotten it to go across is if it is l
-
How do I make this custom Style property work correctly?
I'm trying to create a CSS style property that expects an mx:Effect object to be used in a custom AS class. I want to detect changes being made to the style property and assign the specified effect to an effect trigger belonging to a child of my cust
-
Hyperlink goes to apple's page, not one of mine
I have a link from my home page to another page within my iweb site. but the link -- even though i've linked it to another page of mine -- always opens the apple home page. any thoughts on fixing this? thanks
-
The chains of events is this Take pictures with iPhone...... Upload to a mobileme gallery....... then later when at home, open laptop, sync phone, importing all pictures taken that day Launch iphoto...... hoping to see new album appear under mobileme
-
Error when creating REDO collector
Hi I am setting up Audit vault in my test environment, and I have successfully installed agent and every looks fine in the web GUI, I see my previous collector and agent is up and running However, when I try to add redo collector I end up with this: