Making flash Files from ppt

Hi, i was looking for a good ppt to flash converter. But i only manage to find this site http://ppt2swfsdk.com/ .This is some trial software can anyone suggest me a good freeware ppt to flash converter.
Thanks

Have you installed the patches for LabVIEW 6.0? The latest patch is LabVIEW 6.0.2 and is available free for download from here. You should definitely have the latested patch installed.
Also, can you check your Application Builder settings to make sure that the front panels for your 2 subVIs that cause the crash aren't being removed? LabVIEW 6.0 would sometimes mistakenly remove the panel, which would of course cause the crash if you tried to call the subVI and view its front panel. Also, VIs that Property Nodes or Invoke Nodes shouldn't have their front panels removed, since these rely on front panel data.
You can check these settings from the VI Settings tab of the Application Builder as seen below:
To modify these settings, click the Edit Build Settings button to see the following dialog:
Message Edited by Jarrod S. on 03-22-2006 02:37 PM
Jarrod S.
National Instruments
Attachments:
RemovePanelSettings.JPG ‏52 KB
ChangeRemovePanelSettings.JPG ‏53 KB

Similar Messages

Unable to open Flash file from 2009. Can I backsave a Flash file?

I have Flash files from 2009 and unable to open them in the current programs. Is there a way to backsave it?

Hello Rezun8 --
Here is a link to the Flash file: Dropbox - Flash_test_file_for_modules
Thanks for your help!

Create two or more flash files from one (Excel) data source

Hi experts,
I have the following requirement about Xcelsius.
Our data source is a relational database. Via the ODBC driver we manage to create several queries and execute them into Microsoft Excel. Those excel sheets are the basic for the Xcelsius reports.
Now we want to build some highly visualized reports on that, but the crucial fact is. We don't want to have all the reports in one FlashFile, but we need several flash file depending on the area of the queries.
Hence our requirement would be one of the following points:
- create multiple flash files from one .xlf
- create multiple .xlf from data source
Another requirement is the automatic execution of the process. We don't want to have a person in between, who has to call all the .xlf files to create the Flash reports step by step. What we need is an automatic process.
Can this requirement be fulfilled in a way?
Maybe by using the Xcelsius SDK?
Thanks for any helps and comments!
Sebastian

Sebastian,
Firstly talking about the important requirement i.e. automating the process:
In your case you can achieve this by using the XML maps. This will pick the data automatically when ever report is refreshed.
Secondly, both the approaches are correct, however i would go with the first one.
1. Create multiple flash files from one .xlf
You just need to create one dashboard and have a filter on areas (Invisible) and then export to flash (for every area).
2. Create multiple .xlf from data source
This approach is also fine, however you need to create multiple dashboards and do the same thing i.e filter data based on area.
P.S. Did you get a chance to explore options to integrate Xcelsius with your Relational Database, this will be much effective.
-Anil

Creation of flash file from Device Central failing

Hi,
I'm currently trying to create a new flash document from Device Central and the application is throwing the following error:
Cannot create new document. The xfl template document is either missing or corrupted.
I am also unable to test my flash files in Device Central via Test Movie.
This function was working fine until a couple of days ago.
Has anyone had any similar issues? I am running Master Collection CS5.5 for Mac.
Any assistance would be appreciated.

For anyone who has this problem in the future, I have managed to get it working again by doing a complete reinstall of Master Collection.

Saving a flash file from cs3 to cs4 ruins the file!

Last time I used flash for an urgent commission I discovered a very heavy bug, which did cost me half a day of work and nearly the whole commission. What happened:
I saved a flash file originally created with Flash CS4 as CS3 because the Actionscript programmer did not have a newer version. When I reopened the changed file and typed CMD+S it saved the file without warning. This was momentous: when I re-opened the file, only the library contents did show up, the timeline and stage was empty. Trying to publish the movie again resulted in a program crash. Thus I had to rebuilt the whole flashfile from scratch the next day and calm down a very nervous (and important) customer. Since then I always chose "Save as" and change the format to "CS3", and – how about that! – the file stays intact.
So HOW can a software have a glitch like this be on the market? I would suggest to Adobe that the rework the whole code because flash seems to be very poorly coded. I experienced numerous minor bugs in the last years, but this one beats them all. You save a file and ruin it.
If anybody else has experienced this, I would like them to share their experiences. Not just with me – share them with the people responsible for this. Write to Adobe.
kind regards,
tomasio

Just save. It'll open in previous versions.
BUT if you used features that are specific to CS6 (like vector strokes) those may not show up in previous versions.
If you want everything to show, flatten the image and save a copy.
If you want to show the structure of the file - avoid features that are new in CS6 and save as PSD..

How to retrive flash files from website

Hi,
I had a developer who has been working on Daciro.com. He build it using all flash. I need to make changes on the website, but it seems like he is out of business. They don't answer their phones or emails.
The website is hosted on their server, and I don't have the FTP details.Can you guys recommend any tools that I can mirror or copy my site onto my local computer, and re upload the site to a real company. I have access to my domain, so I can just point it to a new server after I have downloaded the website files to my computer.
Thaks!

Follow the guidelines to get the temperary files stored in your computer while browsing:
i) Open the IE and view the site you want
ii) Goto > Tools > Internet Options (refer screenshot)
iii) copy the files from there, you will get only the swf and other files without any source fla.
iv) Use SWF Decompiler to extract the source from the swf but it will extract to the maximum possiblity.
http://www.sothink.com/product/flashdecompiler/
hope it helps

Is there a way to download a Flash file from the web?

Hello all.
I am just wondering if there is a way, similar to downloading QuickTime movies and trailers from the web (using the provided link or its URL) to download a flash file? i.e. a flash-made audio or video?
Thanks and cheers

OK!
I use RealPlayer 11.0 beta for this:
http://www.macupdate.com/info.php/id/8428
It automatically tells you if the file is downloadable.
Works like a charm.
Even in the West Country....

How do you configure AMS to stream flash files from my dedicated virtual server?

I would like to stream files from my dedicated virtual server instead of my computer. Is it possible to configure AMS so that I can do this? Any help would be appreciated. Thanks!

See screenshots:
Nancy O.

Controlling one flash file from an embed one

I have built 2 flash files - one with all of the content, and
one with all of the menu buttons, (I did this so I can update the
"buttons.swf" file without having to edit the "content.swf" file).
I have no problem loading the "buttons.swf" file using the
loadMovie function, but I don't even know where to start when
trying to control the "content.swf" file.
The buttons should be able to control the gotoAndPlay
function of the "content.swf" file so they can control the pages
that appear in the "content.swf" file.
How would I go about doing this, and where would I need to
add the code? Into the "buttons.swf" file, the "content.swf" file,
both, or is it even possible?
Thanks
Mike

Hi Ned,
I'm using the attached code, where btnholder_mc is the
instance name of the box to hold "buttons.swf"
Using this code "buttons.swf" loads correctly, however, I
don't know how to make this movie control the gotoAndPlay function
of "content.swf".
I should mention that "buttons.swf" has 7 different buttons
within it, each of which I would like to load a different page
within "content.swf". I don't know if this is doable, but I'm
trying to do it as such so I only have to update 1 file full of 7
buttons, rather than 7 different files, each with their own button
(for the purposes of changing themes/design/etc.)
I know that if I loaded each individual button as a movie I
could place an onRelease listener to each to run the gotoAndPlay
function, but I want to avoid having 7 different button movies. Any
ideas?

Running flash file from non-english folder

I am trying to run a flash movie located in a folder with non
english characters (japanse, chinese). (Using latest flash 9
player)
The movie does not play at all. Moving the movie to another
folder with english only characters works fine.
Also, it seems that this is something that has changed in the
latest version of flash.
Previous version of flash 9 seems to work correctly.
Any ideas?

Hi Jim.
Sorry, I thought I read that somewhere that a Flash file can preview your whole project before you Burn it.
Can you give me any insight on my other problem about the Code 25-Not Enogh Space on Disc Problem I'm having?
Also do you knkow of a good 3rd Party software I can use to burn ISO files if Encore cannot do it.
Thanks

Making avi file from tiff's?

I would like to make avi from several tiff files. Is this possible in Labview?

Maybe is this one:
IMAQ AVI Read Write Example
The following link may be useful too:
How Do I Play an AVI File from LabVIEW?
Enrique
www.vartortech.com

Making executable files from vis

Hi,
I am trying to make an executable file from vis. I have four subvis inside a main vi. Four booleans opens up my each individual subvis. Now when I make an executable,its works withoiut an error. Now when I run the program, my main vi opens up with four boolean. Now two of the boolean works perfect but the other two gives the window error. Can someone help me in this regard. I dont see why the two booleans would give me error. What could be the possible cause?
Thanks
SAL

Have you installed the patches for LabVIEW 6.0? The latest patch is LabVIEW 6.0.2 and is available free for download from here. You should definitely have the latested patch installed.
Also, can you check your Application Builder settings to make sure that the front panels for your 2 subVIs that cause the crash aren't being removed? LabVIEW 6.0 would sometimes mistakenly remove the panel, which would of course cause the crash if you tried to call the subVI and view its front panel. Also, VIs that Property Nodes or Invoke Nodes shouldn't have their front panels removed, since these rely on front panel data.
You can check these settings from the VI Settings tab of the Application Builder as seen below:
To modify these settings, click the Edit Build Settings button to see the following dialog:
Message Edited by Jarrod S. on 03-22-2006 02:37 PM
Jarrod S.
National Instruments
Attachments:
RemovePanelSettings.JPG ‏52 KB
ChangeRemovePanelSettings.JPG ‏53 KB

Help transporting a flash file from flash encoder into cs4 premiere.

Hello -
If anyone could help - it would be greatly appreciated.
I've been using Flash Media Encoder 3.1 to create LIVE videos.
Video Settings:
Logitech Pro 9000
Format VP6
15 FPS
800x450 input / output
Bitrate 500 kbps
I wanted to edit some of these videos but am having trouble importing these .FLVs into Premiere CS4
The file does import but problems occur -
1. The video is turned vertically instead of horizontally
2. No video actually plays and remains a black screen
I'm thinking it could possibly be the preset I'm bringing in with. Any help would be great!
Thanks so much -
Leo

Format is not supported by Adobe Premiere Instead of trying to edit encoded file, edit avi file

Help needed to load a flash file from another flash file

This is a two part question - but I am sure that answering
one will solve the other.
I have a menu.swf file, and if I click on the top button it
should load module1.swf. (Which it does) - however I can see the
menu.swf file underneath the module1.swf file.
The second part of the problem is that when I click on the
top button of menu.swf, I want it to goto a specific location
within module1.swf ( say the 8th page )
If I use loadmovienum ("module1.swf",0) it opens a new window
- instead of replacing menu.swf
any ideas

Use loadMovie() or loadClip (with the MovieClipLoader class)
depending on how much you want to know about/control the load. With
these you can specify a target movieClip for the load.
Not sure what you mean by 'location'. If you're talking
frames, you can use the load's target movieclip as a reference to
the swf and use gotoAndPlay - but you have to make sure the swf is
loaded first.

Alignment problem in flash file while viewing in IE 7

hi,
When i try to view the Xcelsisus Dashboard flash file from the BOBJ Enterprise server, some objects in the flash objects get aligned incorrectly. But when i view the flash file from Xcelsius>Export to flash, ther is no such mis-alignment..
Is there any way to fix it ?
Or Is ther any way of making it to view in a fixed size in the BOBJ server ?
Or Is ther any way of loading html file (which have embed flash file) in the BOBJ server ?
Regards,
Jefferson Daniel D

Do the flash communicate with files which is outside of the sitedomain?

Making flash Files from ppt

Similar Messages

Maybe you are looking for