Making for Other domains

Any idea how to publish iWeb sites for non .mac customers?
Like i ve an account in yahoosites.
How to publish into that?

In iWeb, there are basically two publishing options..."Publish to .Mac" and "Publish to Folder". In the case of a non-.Mac user with a 3rd party web host, you would use "Publish to Folder". iWeb then publishes the entire website into a folder ready for upload (FTP) to the 3rd party webhost. You will have to consult the 3rd party web host on the particular directions and directories where you will have to upload the folder.

Similar Messages

[Solved] Need pointer for setting up an email server for other domains

I am trying to setup a mail server that can handle multiple domains. Followed this tutorial [1]
What I have:
mailserver.domain.tld
domain.tld
domain2.tld
I have set up postfix with dovecot through postfixadmin, have configured roundcube as my web email client. For the emails coming from and going to the @mailserver.domain.tld addresses work as I would expect them to.
But what I am not grasping I guess is how do I add the domain.tld and domain2.tld domains so that the emails are @domain.tld but they are properly routed to be received on @mailserver.domain.tld
I have been reading the wiki and the postfix virtual readme, but I feel like I am getting lost and confused on terms. Can someone point me back on path for what the proper next step is to be able to get the other domains to receive mail properly. Should it be done with a virtual email or domain or? I have tried both, but probably not properly and any time I send from @domain.tld the email headers do not say to send back to @mailserver.domain.tld .
Thanks for your time and help.
[1] https://wiki.archlinux.org/index.php/Si … ail_System
Last edited by vwyodajl (2013-03-26 21:03:17)

Did you add MX records for mailserver.domain.tld to your domains? That should basically all that is needed to get it working, assuming you configured the domains in postfixadmin already so your postfix feels responsible for them.

Configuring SMTP in SAP for other Domain(GMAIL,YAHOO ETC)

i have configured SMTP configuration in SAP........now the problem is mail is going from SAP to local domain,i want to send it to other domain also like yahoo,gmail etc.......plz help me by telling configuration in SAP

hi
good
go through these links
http://kb.hughesnet.com/al/12/2/1047.htm
http://help.sap.com/saphelp_webas620/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
thanks
mrutyun^

SPSecurityTokenService slow for other domain users

We have a situation where users from another trusted domain suddenly are having slowness getting into SharePoint. On tracking the ULS entries, I noticed that the SPSecurityTokenService was taking a while to complete issuing a token. Everytime, the wait time
is approximately the same time.
Leaving Monitored Scope (SPSecurityTokenService.GetOutputClaimsIdentity()). Execution Time=42163.5752588667
Leaving Monitored Scope (SPSecurityTokenService.Issue). Execution Time=42163.9392716113
Any idea what might be causing this? We just started experiencing this recently.
Thanks in advance,
Jake.

Was a nearby trusted domain controller firewalled to prevent the SharePoint server from communicating with it? Was a nearby trusted domain controller removed?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Not send mail for external domains

Hi,
I have installed OCS 10g(10.1.2) in linux. All components ok, but i not send mail for external domain.
Att,
Mesti

I remember in version 9.0.2 that i configure in SMTP_OUTBOUND the IP of DNS external to send mail for other domains.
Mesti

The box indicating that this domain controller is the last controller for the domain is unchecked. However, no other Active Directory domain controllers for that domain can be contacted

I have 2 domain controllers running 2003 server, server1 and server2. I ran dcpromo on server1 and removed AD and removed him from the domain and disconnected from network. I then added a 2012 server
with the same name and IP address server1 with no problem. Replication from sites and services work fine on both controllers.
The new 2012 server1 is GC. I transferred all FSMO roles to server1. Again no problem and replicating using sites and services. AD on server1 is populated correctly.
Now what I had intended on doing was a dcpromo to remove server2 from the domain so I can then add another 2012 server. That is when I get the: "The box indicating that this domain controller is the last controller for the domain
is unchecked. However, no other Active Directory domain controllers for that domain can be contacted.
I have DNS installed on both servers and both look good with replicating there. Strange thing is when on the 2012 server within DNS if I right click and connect to another DNS server I can add server2 just fine but from server2 adding server1 it tells me it
is not available.
Help please!

Hi,
As there is server 2012 DC (SERVER1) DC is operational in a domain then "This domain controller is the last controller for the domain" should be remain unchecked when you demote SERVER2 DC.
If you are getting error "Active Directory domain controllers for that domain can be contacted" while demoting SERVER2 DC then check the DNS pointing on both as per below article, disable windows firewall on all DC, less possiblities but worth to check if both
are different site then check the ports are open on firewall.
http://abhijitw.wordpress.com/2012/03/03/best-practices-for-dns-client-settings-on-domain-controller/
http://technet.microsoft.com/en-us/library/cc766337(v=ws.10).aspx
http://social.technet.microsoft.com/wiki/contents/articles/584.active-directory-replication-over-firewalls.aspx
run “ipconfig /flushdns & ipconfig /registerdns“, restart DNS server and NETLOGON service on each DC and try to demote server2 DC.
If issue reoccurs, post dcdiag /q result.
NOTE: If initial replication was completed between both DC (new 2012 and old DC) then you may remove the server2 DC from Active Directory forcefully (DCPROMO /FORCEREMOVAL) and perform metadata cleanup.
Active Directory Metadata Cleanup
http://abhijitw.wordpress.com/2012/03/03/active-directory-metadata-cleanup/
Best regards,
Abhijit Waikar.
MCSA | MCSA:Messaging | MCITP:SA | MCC:2012
Blog: http://abhijitw.wordpress.com
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees and confers no rights.

How to send Emails to Other Domain for the users in My AD

Hi All,
I have a Domain test.com and in this i created 10 users and now i in the properties of their account i added mail address as ****.dummy.com (which is not my domain which i have created separately and there is no relation between these two) No will the mails
will be deliverd to those users??
Thanks

Is this "other domain" you are talking about just an SMTP domain, or a Windows domain? If the former, and there is a messaging system they can receive with, you can just send (though you may need a send connector). If the latter,
is it in the same Windows forest? If so, you need to prepare the domain for Exchange (using Setup /PrepareDomain). You can then add that domain to your Accepted Domain list (in the Organization configuration, Hub Transport role) and create
mailboxes for these users. Once the have mailboxes, they will receive email. Until all of this happens, they won't be able to get mail.

How to increase SBRS for a domain?

I've implemented a new mail system for a new company recently. But some staffs in this company reported that they could not send email to some domains like hotmail.com, msn.com,etc. So I go to senderbase.org to check my company IP address and "Email Reputation Score: Poor". How can I increase the SBRS? and also can I know the reason why this IP has a poor email reputation score?

Also you may want to verify if you have the correct DNS information for your domain.
Here is a great article that goes into detail on this:
http://www.pkguild.com/?p=7
With Hotmail - it should help (according to their website) if you have SenderID and SPF records for your domain.
If your email is "worth money" then you can pay a company like SenderScore Certified a chunk of money and get onto their whitelist (which Hotmail and other major email providers use). Ironport used to own SenderScore (under another name) but it is totally seperate now.
You can also improve your SBRS by making sure none of your email addresses forward email out of your Ironport (as they will be also forwarding spam out too).
If you have mailing lists - make sure they do proper forwarding (ie not an Exchange DL or UNIX /etc/aliases) as they make it look like you are forging other people's domain names.
Oh yeah - if you have any spammer issues on your network - fix them too :)

Adobe Premiere Pro CC launches for some users, but crashes for others.

I am troubleshooting an issue in a college computer lab. Adobe Premiere Pro CC launches perfectly for some users, but crashes for others. All computers are joined to a domain. The program launches successfully under faculty and admin accounts. It launches under my student account and will launch for some students in the class. There are, however, some students who cannot get the program to launch. Each time it fails when attempting to load ImporterQuickTime.prm.
For these students, the following error appears:
Adobe Premiere Pro CC has stopped working
Check Online for a solution and close the program (Tried this nothing seems to come of it)
Close the program
I clicked View problem details
Problem Event Name: APPCRASH
Application Name: Adobe Premiere Pro.exe
Application Version: 7.2.2.33
Application Timestamp: 532c3999
Fault Module Name: dvaui.dll
Fault Module Version: 7.2.2.33
Fault Module Timestamp: 532bed86
Exception Code: c0000005
Exception Offset: 00000000002d31c1
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 3272
Additional Information 2: 32722596c6b4441ac0840ed9743cbfbb
Additional Information 3: 3e22
Additional Information 4: 3e2260f0a53760c20f23c7e2675c1736
I did check Quicktime and it is not updated to the most recent version. However, if it was a result of Quicktime not being up to date, why can some accounts launch the program while others cannot. I have also updated the graphics driver on one computer. No change. I compared my student Active Directory account to that of one student who could not launch the program. They are in exactly the same place in AD and therefore have the same permissions on the domain. This is a puzzling issue and the instructor is getting frustrated. Any help or suggestions with this matter would be greatly appreciated.
-Barb

I have no idea, other than what I said about the program's design requirement for an Admin account and "sometimes" problems on any other account
About the only thing I can suggest is a "remote control" chat session... when a student with a non-working account is having problems
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Email Activity not sending emails for one domain - 10.1.3.4 MLR#10

I have four domains in my BPELConsole. My evey BPEL process has CatchAll block and I'm sending email notification with fault details.
Somehow, my BPEL processes from three domains are sending emails properly but myDomain4 is not sending emails even after successful execution of Email Activity.
1) I have compared the Email code with processes in other domain and they are similar.
2) orabpel.bpelnotification is not logging any error for this notification.
3) I never received any email from this domain. There was no error in logs during domain creation.
3) I am getting following in logs that sending email was successfully executed. It received Notification ID too
<2010-09-22 07:24:44,530> <DEBUG> <myDomain4.collaxa.cube.services> <oracle.bpel.services.notification.queue.QueueConnectionPool::QueueConnectionPool> Fetched a queue connection from pool java:comp/env/jms/Queue/NotificationSenderQueueConnectionFactory, available connections=4
<2010-09-22 07:24:44,534> <DEBUG> <myDomain4.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Start of send(type,caller,message) type = email caller = BPEL
<2010-09-22 07:24:44,534> <DEBUG> <myDomain4.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Notification ID 12834c63e81c20d0:-71064af1:42b35e5dab4:-7283
Please help/hint for any possible solution/debugging.

sometimes i have seen emails not being sent when the async invokes takes more time than the overall completion.. And yes, we might still see successful log as emails sent. FYI - I am with 10.1.3.3.1 MLR #8.
did you try just creating a email only process? switch off all other processes in that domain and initiate only this email process to see what happens..

How can I set up SSL login authentication on one domain for multiple domains

Our site currently runs in 22 countries with 22 different
country domains:
www.mysite.com
www.mysite.co.uk
www.mysite.fr
etc
We want to use SSL on our login pages but realise that the
cost of certification for every domain is expensive. One solution
would be to channel all login activity to a single domain, eg:
www.mysite.com/login.cfm?site=fr which would then redirect to
www.mysite.fr – this is how Google do it
But, currently we are using encrypted cookies for login
authentication so we would have the problem of having to transfer
the cookie info across domains securely. Is there any way of going
about this?
Any other suggestions would be great, too. We do plan to move
to session management for logins but this is a longer term project
so we are hoping to sort out the SSL prior to that.

Can you not pass the values you need as URL parameters?
Encrypt them befor you send them and then decrypt them on the new
domain. Then add them to whatever place you need (cookie, session,
etc.)?

How to configure mail for multiple domains

Hi There:
I am the only Admin for a Mac Mini Lion Server, I have 3 Domains that I host, the DNS is done separate along with all records.
I was able to get the Web Sites up and running.
I need help to set up Separate E-Mail Accounts for each Domain, so each Domain receives it's own mail.
Will you please give a hand, I am a beginner
Thank YOU!!! in advance!!!!

There is no default for those entries. you need to set it up manually by using the custom label.

How to bypass from OAM authentication for certain domain

Hi All,
We are trying to unprotect certain domain from OAM domain but coudn't. Please help us fix this issue.
Environement details:
We have two nodes, one node for OAM_OSSO and another one for OSSO_Portal application.
OAM server details:
In this server, oracle application server single sign on(services are HTTP, OC4J, and OID) and OAM. Integrated OAM_OSSO using [ID 979827.1]
Portal server details:
In this server, oracle application server single sign on(services are HTTP, OC4J, and OID) and portal weblogic server(portal application) is running. portal weblogic is registered with thier own portal OSSO.
In OAM, We protected following portal url's
/sso/auth
/pls/orasso/orasso.wwsso_app_admin.ls_login
portal _OAM integration is working fine.
Now portal team come with new requirement for customer, application also running in their same portal weblogic server and that portal application domain is alreday registered with Portal OSSO and Portal OSSO page is protected by OAM. the requirement is bypass OAM authentication, and need to authentication against their own portal OSSO+OID.
Please tell me how to bypass OAM authentication from this scenerio.
-Sarath

Hi MD,
Thanks for your update.
We are using oracle 10g. Please tell me how Anonymous scheme will help us to get out from this issue.
Portal Weblogic server registered with portal IDM server and portal IDM server OSSO protected by IDM OAM. So if i tried any of the application which deployed under portal weblogic server will get protected by OAM right. Please correct me if iam wrong.
In this scenerio we have two OSSO, one in OAM node and another one in portal server. Now portal team come up with new webserver domain for customer, in customer scenerio we want authenticate againt portal OSSO with their own OID rather than using OAM authentication. Here my concern is, customer or employee the portal weblogic server and portal OSSO are common for both user but only difference in webserver domain.
So if i tried to access customer application, then customer webserver redirect to portal weblogic for open the requested page(note if webgate not in picture). portal weblogic server is register with portal OSSO and its redirect to portal OSSO for authentication but Portal OSSO server integrated with OAM using webgate.
1. When tried to access customer application ,Portal OSSO server tried to show own sso login page for authentication but Portal OSSO server already integrated with OAM. so portal OSSO server requested to OAM to access portal sso login page not the request of customer page login.
2. here,portal OSSO login page protected and OAM serve login page for OAM authentication against OAM OID. If i specify anonymous scheme for customer domain then how will work here, portal OSSO requested to OAM to access portal OSSO login page not the customer page or employee page...
Here OAM authentication will come into picture for all scenario but need bypass for customer login.
Requirement is when customer trying to access then authentication need to happen in portal OSSO not in OAM. Hope you understand the architecture.Please suggest how.
-Sarath
Edited by: 898990 on May 11, 2012 8:22 PM
Edited by: 898990 on May 11, 2012 8:25 PM

Multiple hostnames for multiple domains

I am currently running 3.0SP4 in Open mode without a gateway. I have one server instance with two domains (call them domain1 and domain2). Instead of having users have to go to append the domain name to the server URL, I would like to create two separate hostnames for each domain (call them domain1.test.com and domain2.test.com, both are in the same subdomain). I added both hostnames to the system and to the DNS and can reach the server fine. I followed the procedures in the iPS Admin Guide (Chapter 8 Configuring the Gateway, Using Virtual IP and DNS Names), adding the following:
domain1->Authentication->Domain URLs
/domain1
domain1.test.com
domain1.test.com/domain1
domain2->Authentication->Domain URLs
/domain2
domain2.test.com
domain2.test.com/domain2
I also editted the platform.conf file to include:
ips.virtualhost=domain1.test.com domain2.test.com 111.111.111.111
Domain1 is set to be the default domain.
I don't want to permit access to domain1 from domain2.test.com, or vice-versa.
When I go to domain1.test.com, it brings up the login screen fine and I can log in. When I try to go to domain2.test.com, I get a No Such Domain error.
I think this might be because it might be trying to redirect domain2.test.com to the default domain (domain2.test.com/domain1) and so I get this error, since it is not in the Domain URLs for domain2.
Or is it a separate problem? How can I fix this?

I found my problem... had to do with the default domain Domain URLs.

Multiple Certs for multiple domains on one server

Is it possible with WLS6 and WLCS3.5 to serve up multiple domains with their own certificates?
i.e. https://www.foo.com and https://www.bar.com on the same box.

Hi,
for one WebLogic Server you can only specify one certificate. So to achieve
this you will have
to use different WLS instances for your domains - which is possible on the
same box.
Kind Regards
Maria Salzberger
Developer Relations Engineer
BEA Support
Mike Berger schrieb in Nachricht <3c21f5c3$[email protected]>...
Is it possible with WLS6 and WLCS3.5 to serve up multiple domains withtheir own certificates?
i.e. https://www.foo.com and https://www.bar.com on the same box.

Making for Other domains

Similar Messages

Maybe you are looking for