Making galleries, advice please.
Hello all,
I have built a website which has in it a gallery page in which are several albums, each album holding around 20 to 30 pictures.
So far what I have done is made a main gallery page which has links to separate album pages. On each album page is a set of thumbnails (made with 'Easy Thumbnails' from the original images). When the thumbnail is clicked the picture opens with Slimbox. No problems there.
What I am asking advice on, as several of my clients want the same, is if there is a less painstaking way of adding the thumbs then linking each one individually to master image?
I know it is possible as in my capacity as a photographer I have added pictures to sites not maintained by myself through a control panel. So any advice offered would be gratefully received.
Jeff
You could try jAlbum...
http://jalbum.net :
1. It optimizes images
2. Creates thumbnails
3. Offers a number of interface / skins for final use
4. More...
Also, it's easy to tweak...
Similar Messages
-
Advice please from the Experts
hi,
advice on all of this would be of great help, so please bear with me.
Hoping to buy a nice new Mac Pro, the Two 2.8Ghz Quad-Core Intel Xeon model for work.
It would be mainly used in editing video, sound recordings including Powerpoint with voice/video, all for Podcasting via iTunes. At present it takes forever to render a video clip down, say from 1.5Gb to something like 100Mb using Quicktime Pro', making it small enough for iTunes on my old G4 or even my Macbook.
A couple of questions for you guys ( the experts ).
Forget memory, that's a no brainer, the more the better I know that part. What i need advice on is this:
1) Graphics card :- do I go for the 2 x ATI Radeon 2600XT or the NVIDIA GeForce 8800GT ?
( read several discussions about the XT or the GT, some for one, others for the other )
2) Hard Drive :- I want speed, so do I go for the 300Gb SAS or should I stay with the standard HD !
( I know that the SAS is smaller in size, but....... advice please )
I hope someone ( or even more ) can come up with some sound advice please. My gut feeling is go for the SAS but unsure about which GC to use.
Oh before anyone does ask me, I will be getting the 20in Apple display too.
Regards
SteveSAS and Mac Pro RAID are discussed (threads should be easy to Google) and based on Barefeats, and huge price jump, nearly $2000 extra, no.
Too bad these don't fit in Mac Pro - WD VelociRaptor
http://www.wdc.com/en/products/products.asp?driveid=459&language=en
Fast, low cost WD Caviar SE16 640GB
http://www.wdc.com/th/products/products.asp?driveid=394
Use 1TB drives are excellent for most and have gained speed and popularity.
Again, all of these are reviewed on Barefeats or look at StorageReview, though bare in mind drives perform different under Windows than on OS X.
So I am still partial to low latency Raptor.
http://www.wdc.com/en/products/Products.asp?DriveID=189
http://eshop.macsales.com/item/Western%20Digital/WD1500ADFD/ -
New System Build feedback/advice, please...
Time to build a new WorkStation. My motivation for upgrading is that I have been using a mediocore laptop (i7m, 8gb, 250gb ) from my work as my home system for the last 2 years, I am starting to get more freelance coming in and need a good desktop.
I am not so sure about my processor, mother board and video card choice. I am more interested in app usability than absolute throughput and want to maximise my dollar investment.
Purchase date: this week
Budget: I'd like to stay close to $1000-1300, but can spend more for significant performance gains. As I do more research, my inclinations are trending higher.
System Usage: My primary uses will include photo editing with Lightroom and Photoshop, 3D graphics using 3D studio Max, Maya and Mud Box, HD video editing using Premiere and After Affects and Web Design. I will also use it as an HD media player and hifi audio is important. Maximizing cs6 performance in premiere & pShop is my main target. I am focused mainly on user experience while running these apps. If I need to encode hrs of video or crank out frames in max/maya, I can do it at work. I seldom run games.
Monitors: I'm running two Dell U2410's IPS, calibrated w\Color Munki, one portrait one lanscape.
Parts to Upgrade: Full system build
O/S : Win7 Ultimate, I might play with Ubuntu/Virtualization
Vendor: Newegg unless I can save big $$ else where. I like B&H.
It needs to be an Intel machine & I have chosen lga 2011 becuase I'll eventually go to 64gb. I'll do some modest overclocking.
Any advice is appreciated. Thank you for your expertise.
Processor:
Intel Core i7-3820 Sandy Bridge-E 3.6GHz (3.8GHz Turbo Boost) LGA 2011 130W Quad-Core Desktop Processor BX80619i73820
$299 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16819115229
or
Intel Core i7-3930K Sandy Bridge-E 3.2GHz (3.8GHz Turbo) LGA 2011 130W Six-Core Desktop Processor BX80619i73930K
$569 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16819116492
Do you have any feeling about how much I'll gain by going to the 6 core cpu over the 4 core? Remember, for me usability in the cs6 apps is more important than marginal gains in throughput.
Mobo:
MSI X79A-GD45 (8D) LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS
$218 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130635
or
ASRock X79 Extreme6 LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
$240 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157289
or
MSI Big Bang-XPower II LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 XL ATX Intel Motherboard with UEFI BIOS
$380
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130626
I would really appreciate any feedback on mobos in regards to maximizing cs6...7...8 performance, system logiveity, and performance. Is it worth it to go for a higer end mobo? If so which one. I like the msi's based on eventually ug to 128 gb, but are they money well spent? Any probs w/these mobo's?
Memory:
G.SKILL Ripjaws X Series 32GB (4 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL10Q-32GBXL
$130
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231490
Hard Drive:
SAMSUNG 830 Series MZ-7PC256B/WW 2.5" 256GB SATA III MLC Internal Solid State Drive (SSD)
$160
http://www.newegg.com/Product/Product.aspx?Item=N82E16820147164
Video:
GIGABYTE GV-N65TOC-1GI GeForce GTX 650 Ti 1GB 128-bit GDDR5 PCI Express 3.0 x16 HDCP Ready Video Card
$160 w/ship
http://www.newegg.com/Product/Product.aspx?Item=N82E16814125447
or
MSI N660 Ti PE 2GD5/OC GeForce GTX 660 Ti 2GB 192-bit GDDR5 PCI Express 3.0 x16 HDCP Ready SLI Support Video Card
Item#: N82E16814127696
$300
http://www.newegg.com/Product/Product.aspx?Item=N82E16814127696
I am still a little unsure of the real world differnces that I'll realize by doubling my video card expense, advice please?
Optical Drive:
LG Black 14X BD-R 2X BD-RE 16X DVD+R 5X DVD-RAM 12X BD-ROM 4MB Cache SATA BDXL Blu-Ray Burner with SW, 3D Play Back - BH14NS40
$70
http://www.newegg.com/Product/Product.aspx?Item=N82E16827136250
Case:
COOLER MASTER HAF 912 RC-912-KKN1 Black SECC/ ABS Plastic ATX Mid Tower Computer Case
$60
http://www.newegg.com/Product/Product.aspx?Item=N82E16811119233
Power Supply:
FX Core Edition PRO650W (P1-650S-NLB9) 650W ATX12V 2.2 & ESP12V 2.91 SLI Ready CrossFire Ready 80 PLUS BRONZE Certified Active PFC Power Supply
$90
http://www.newegg.com/Product/Product.aspx?Item=N82E16817207014
Total $1190
or $1760
I have picked the MSI motherboard due to its support for 128gb ram, superior audio and other high end features. The AS Rock for its rep for solid value/performance. Opinions?
Finally, I would like some advice on video cards. I prefer nVidia to ATI, but I'm not sure which chip to go for. The six fifties are cheaper, but the 660 ti provides more CUDA cores.Alex,
I sure wish you would quick picking fights with lots of knowledgeable people just trying to help people build good PCs for running Adobe Premiere. (I am stating that based on not just this thread, but rather the strong challenges you seem to bring to about half of the threads that you've chosen to participate in).
I was the original poster to suggest that Neal select a larger case. Next Harm agreed and cited 6 points which I would agree with regarding why a larger box is better for a video editing rig.
What are the typical goals for someone wanting a video editing PC? I would expect that most users want:
- robust, runs and never fails
- has incredible power; face it, video editing with AVCHD is one of the most taxing applications a PC can face today
- quiet; who wants to be doing creative work with any server room like wind noise
Now let me be specific where you are simply WRONG WRONG WRONG:
You stated: "Back pressure increases in larger spaces due to natural impedance of airflow (much like with electricity traveling over distance)"
Fact: Exactly the opposite; Back pressure decreases in larger spaces due to more room for the air to flow (much like thicker copper passes electricity with less resistance than a thin wire)
Your stated: "Open non-compartmentalized spaces are a recipe for hot spots - areas of turbulence with higher temperatures." and then cited a server room article talking about cooling air taking the path of least resistance -- going under the floor in a server room, instead of through rack mounted servers.
Fact: Lots of open space for large, slow moving fans to keep a video editing box cool is a great way to go
You stated: "Full towers - in themselves - are worse for cooling"
Fact: That is one crazy indefensible statement!
I seriously doubt that you fully comprehend the differences and importance of thermal conductivity, heat capacity, conduction, convection, and radiation for you to make the statements that you have so far and these are the staples for discussing how heat transfer takes place.
Note to other readers... There are lots of ways to cool components including cpus, hard drives, gpus and memory. I suspect that the noise levels brought by servers and some gamers would be totally offensive to the ambient noise level that you want in the room with you for video editing. Therefore we are left with just a few quiet alternatives: 1) lots of volume at low velocity (large cases, large fans, slow rpm), 2) liquid cooling, and 3) Cases with doors or baffles to keep the sound from a noisier solution from getting back to your ears.
Regards,
Jim -
I ordered a new phone and shipped it to a friend in Dubai, UAE. without knowing i have to activate it by making 5minutes calls, please i need a way to activate it without sending it back to the US..any help? this has been very frustrating for me this past few days
scottxx,
That was very nice of you to provide your friend with a new phone! I am sorry to say that the device will not be able to activate while in Dubai. For a device to activate it must connect to the VZW network to become active. I apologize for any inconvenience.
LindseyT_VZW -
AI crashes when I try to open a file or make a new one. Any advice please?
I'm using a laptop and windows. AI starts up ok but I can't actually create anything before it shuts itself down. Any advice please?
Hi Tm,
Can you please check if there are any printers installed/connected on your system ? If yes can you please un-install/disconnect them and verify again ?
Thanks & Regards,
Raghuveer -
Is MS exchange the only way to keep mail synced across all devices? Can Mac mail do this without exchange? I have iPhone,iPad and new MacBook Pro, and looking for advice please.
As Bob says, any iMap service can do this. GMail can, iCLoud mail can too.
Both of these can be used with Mail on any device. -
I movie 09 on my Macbook Pro isn't recognizing the presence of my Sony handycam dvd201E - nor does it offer options - any advice please? dave R
I have a MacBook Pro 15 inch early 2011.
The new features available in OS X Yosemite like Continuity, Handoff,etc are not supported in this model.
I did upgrade RAM to avoid any possible slowdown.
I found replacing the HD with SSD is too expensive for a 4 years old model.
Replacing the CPU/GPU is not for amateurs.
If you think that rebuilding a Mac part by part is a viable option, please go ahead and rebuild it.
Best. -
Hello my battery power has a x on it and the lights are not working and its making a noise - Please assist
The Battery icon with the "X" indicates that your computer does not detect a battery and is operating on electrical power from AC since your computer is plugged in. If your battery is installed but not detected that indicates a problem: 1. the battery is dead; 2. the battery connector is not functioning properly. You mention that there is no response from the indicator lights so it could be either of the two possibilities. The noise is not a good sign. Best to shut it down safely while you can to prevent any possibility of damage and get it to an Apple Genius Bar or Authorized Apple Service Provider to discover the nature of the problem
-
Load balancing across 4 web servers in same datacentre - advice please
Hi All
Im looking for some advice please
The apps team have asked me about load balancing across some servers but im not that well up on it for applications
Basically we have 4 apache web servers with about 2000 clients connecting to them, they would like to load balance connections to all these servers, they all need the same DNS name etc.
what load balancing methods would I need for this, I believe they run on Linux
Would I need some sort of device, or can the servers run some software that can do this, how would it work? and how would load balancing be achieved here?
cheersCarl,
What you have mentioned sounds very straightforward then everything should go well.
The ACE is a load balancer which takes a load balancing decisions based on different matching methods like matching virtual address, url, source address, etc then once the load balance decision has been taken then the ACE will load balance the traffic based on the load balance method which you have configured (if you do not configure anything then it will use the default which is "round robin"), then it will send the traffic to the servers which it has available and finally the client should get the content.
If you want to get some details about the load balancing methods here you have them:
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_1_0/configuration/slb/guide/overview.html#wp1000976
For ACE deployments the most common designs are the following.
Bridge Mode
One Arm Mode
Routed Mode
Here you have a link for Bridge Mode and a sample for that:
http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_Bridged_Mode_on_the_Cisco_Application_Control_Engine_Configuration_Example
Here you have a link for One Arm Mode and a sample for that:
http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_One_Arm_Mode_with_Source_NAT_on_the_Cisco_Application_Control_Engine_Configuration_Example
Here you have a link for Routed Mode and a sample for that:
http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_Routed_Mode_on_the_Cisco_Application_Control_Engine_Configuration_Example
Then as you could see in all those links you may end up having a configuration like this:
interface vlan 40
description "Default gateway of real servers"
ip address 192.168.1.1 255.255.255.0
service-policy input remote-access
no shutdown
ip route 0.0.0.0 0.0.0.0 172.16.1.1
class-map match-all slb-vip
2 match virtual-address 172.16.1.100 any
policy-map multi-match client-vips
class slb-vip
loadbalance vip inservice
loadbalance policy slb
policy-map type loadbalance http first-match slb
class class-default
serverfarm web
serverfarm host web
rserver lnx1
inservice
rserver lnx2
inservice
rserver lnx3
inservice
rserver host lnx1
ip address 192.168.1.11
inservice
rserver host lnx2
ip address 192.168.1.12
inservice
rserver host lnx3
ip address 192.168.1.13
inservice
Please mark it if it answered you question then other users can use it as reference in the future.
Hope this helps!
Jorge -
My Z2 tablet has yellow lines appearing on screen edges. Advice please?
My tablet developed a yellow line down the left hand side of the screen fairly early on. This was shortly followed by another line along the bottom, and now one on the right. Advice please?
Definitely a hardware fault, you should have no problem getting the tablet replaced, or repaired otherwise.
-
I have ongoing problems with "application not responding" in various programmes, ie Word, Excel, Illustrator, Photoshop, iPhoto etc. I recently subscribed to CC but the problem still persists. Any advice please? This applies to my iMac and my macbook air! I'm using OSX Version 10.9.3
Hi Shauneenb,
Welcome to the Apple Support Communities!
If you are having issues with multiple applications becoming unresponsive I would suggest the steps in the following article, including starting in safe mode.
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
I hope this helps,
-Joe -
I have just added more storage to icloud but now want to cancel it and get a refund, any advice please?
Try the suggestion by Plusco here > https://discussions.apple.com/thread/3404394?start=0&tstart=0
-
Question ?
Macbook Pro OSX 10.8 and Epson WF 7525 will no longer print.
It did until quite recently . However now I get filter failed and RastertoescpII and pages of items when i try to print .
Print head test sheets/head cleaning etc ok .
Have tried to to uninstall and reinstall but nothing.
Any advice, please?.
ps
The printer deos not show up on Epsons site but i think I have the software from Apple.
Not an ideal situation.Try a reset > OS X Mountain Lion: Reset the printing system
-
When trying to set up an email account I keep receiving ssl errror message. Any advice please.
Error is: Cannot connect using SSL. Do you want to try setting up the account without SSL?
Answer: Yes
Then "Verifying" appears at top of screen but nothing happens.
Tiscali/Talk Talk is the provider. -
While downloading the free trial for Final Cut Pro X my internet has dropped out many times. It does however seem to continue ok each time it reconnects. Will this affect the software when it finishes? Is this a problem? Any advice please?
This has happened to me with a few downloads without any upsets.
You should be OK.
As I recall the download is around 1.2 gig so it takes a bit of time and effort to get it to your system.
Al
Maybe you are looking for
-
Cannot type/paste normal international text when non-Unicode in CS6
Hello, In all versions of DW (up to CS3 which I have used) I had no problem pasting / typing HTML or text with international characters in Design View when the page is using a non-Unicode, yet international encoding (like Windows - Greek or ISO - Gre
-
So I have a 21.5 inch late 2012, Is it possible to use it as a Monitor to take input from other devices (DVD player , Gaming consoles ,etc) via thunderbolt port (as mini display port is not availabe in 2012 model) ?
-
Idle users and away users both are shown with red blip
Hi, In my ichat (even when I was using tiger) I can see only two status for all my buddies. Its either green or red. I am not able to get the yellow for idle buddies. Any ideas how to get the yellow ones to work? Thanks
-
So i forgot the pass code to my Ipod and have fully disabled my Ipod, it is telling me to connect to Itunes to unlock it but i no longer own the computer that i first connected it to, what do i do?
-
Hello, i face some problem when i tried to execute the cltpull_panel.exe. it show some error line as below. This problem only happen after i formatted my PC 2 days ago.Before that the program run smoothly without any error. i have install back the la