Making local calls doesnt work
i have just moved nto the 01590 exchange area yet when i try and make a local call within that exchange my phone returns a dull buzzing noise.. not even the number unobtainable
everywhere i have lived before you could call within the exchange without the national dially code.. so whats happening?
it making me pay national rates for a local call...
Sue
SueF wrote:
i have just moved nto the 01590 exchange area yet when i try and make a local call within that exchange my phone returns a dull buzzing noise.. not even the number unobtainable
everywhere i have lived before you could call within the exchange without the national dially code.. so whats happening?
it making me pay national rates for a local call...
Sue
Hi Sue.
Are these calls via BB Talk, or your "normal" telephone ? If the former then Keith has the info, if the latter then that sounds like it could be a fault. Can you say what the next two digits are you are dialling ? That usually pinpoints the destination exchange.
Have you tried dialling yourself ? (without the 01590). If you've got the 1571 service, you should get through to your own call minder system (and may cost you for a call, depending on your package) or just get engaged.
Have you tried dialling a few different numbers (e.g. taxi, chip shop etc - of course it's best to have a reason to call rather than just "try") ?
Is it just one particular number getting the response you are seeing ?
Sorry for all the questions, a tiny bit of extra info can help
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures
Similar Messages
-
Why is the fb video call doesnt work with macbook?
why is the fb video call doesnt work with macbook?
Hi
Just to correct GerdW - the vis of a polymorphic vi do not have to have the same output.
Have a look at the vis I attached. I just pass a dbl to a polymorphic vi and get a dbl in one vi and a string in the other.
The real problem is that the vi has to be set to the necessary type. If there are different inputs you just can wire them to the polymorphic vi, but this does not work with the outputs, so you have to set the type.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
Polymorph.zip 14 KB -
My iphone calling as well as incoming calls wont work after i recently updated my iphone with the 7.0.3
Check "Call and Connection Issues" here:
http://support.apple.com/kb/TS2802 -
Android to desktop pc video call doesnt work
and I am trying to with a loved one in Penn who has a desktop compute. We have tried video calls but only have a blank black screen and have no audio. I can see myself in a smaller window but thats it
You might want to see if the following article helps you:
http://osxdaily.com/2011/07/06/facebook-video-chat-mac-os-x-lion/
Hope this helps -
HT201436 Calling doesnt work as expecting
Can someone help me ? When i am calling someone i cant hear voice clear there !!
Check "Call and Connection Issues" here:
http://support.apple.com/kb/TS2802 -
Why video call not working on Facebook?
why my video call doesnt work
I need help ...everitime i try to do video call..and its writen video failed..why??
-
when i make calls, all i can hear is static, and when i plug in headphones or turn the speaker on, it still doesnt work. but facetime, music, an apps sound still work. help? iphone 5
Hello Delaney1130,
It sounds like you are getting static on both the receiver and the speaker when you make a call. I would use the troubleshooting from the following article to help resolve the issue named:
iPhone: Troubleshooting issues making or receiving calls
https://support.apple.com/kb/TS3406
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Check your phone settings:
Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
Ensure that your software is up to date:
Check for a carrier settings update.
Check for an iOS software update.
Note: Some updates may require a Wi-Fi connection.
If the iPhone has a SIM card, reseat the SIM card.
If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
Reset the network settings: Tap Settings > General > Reset > Reset Network Settings.
Try to make or receive calls in another location.
Attempt to isolate to one network band:
If you're having the issue on LTE, disable LTE, if possible, and try again.
If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
Contact the carrier to check the following:
Your account is properly configured to use the specific iPhone that has the issue.
There are no localized service outages.
Your account doesn't have a billing-related block.
Your calls don't have errors on the carrier system.
Restore the phone as new.
If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Hi I use my phone for conference calls and use the microphone jack to connect to speakers. It doesnt work when making phone calls but when i play music on the phone the jack works with the external speaker.
Happy to have been of help. Hope all goes smoothly.
BTW, for the sake of others who may help you here, it's usually most polite if you mark the post that answered your question as being the one that "solves" it, not your own post. That's how people get points here, if a questioner marks their post as either "helpful" or "solving". It's not an issue for me, but for those just starting out in the forums it may be important to them. See:
https://discussions.apple.com/static/apple/tutorial/mark.html
and
https://discussions.apple.com/static/apple/tutorial/reputation.html
Regards. -
I went in to apple, they couldnt figure it out, I am on AT&T so I was figuring on going into their store today and seeing if its something with the network, if not I am going back to apple, but this is literally a brand new phone i bought yesterday, not refurbished or anything, brand new, does anyone know why this isnt working? Everything else works fine, the mics both work, its just when I make calls or someone calls me the mic doesnt work.
When you see the same issue on more than one hardware device, it means that the problem is likely to exist outside of the hardware. Two things to investigate would be the software/firmware on the backup and issues with the cellular network. It's probably safe to rule out the cellular network as well.
First, make sure that you have imported copies of all the information (pictures, videos, documents) on the device. Do this thorough itunes, and the applications (photographic and document processing) on your computer. Perform a firmware update then restore the device as new. If the problem persists, then you may actually have the worst luck and discovered two devices with an identical issue.
Read each of the steps before initiating the DFU.
!. Connect the iPhone to any computer running a fully updated version of iTunes.
2. Press and hold both "home" and "sleep/wake" buttons
3. After eight seconds let go of only the sleep/wake button.
4. Keep holding the home button until you see a popup mesage in iTunes.
5. Read all all the popups, then use iTunes to update the iPhone's software.
If the popup fails to show, repeat steps 2 through 4 -
Hi folks,
i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
Can any one help me in this regard??Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.
-
Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.
Sounds like you need to contact skype.
-
i have a mac pro. when i try to connet to a vedio call. the call doesnt connet. the person on the other side can see me but i cant see them. i updated the new version for adobe flash. but the camra stiil doesnt work.
You might want to see if the following article helps you:
http://osxdaily.com/2011/07/06/facebook-video-chat-mac-os-x-lion/
Hope this helps -
Siri used to work fine when making mobile calls in Ecuador until yesterday, when the administration of Ecuador added an aditional number in all mobile numbers existing in Ecuador. Since then Siri is unable to make any mobile calls with any new number.Help
I`ve tried restarting, rebooting, nothing works.
The interesting thing is that SIRI can call to previous mobile numbers (without the new digit) obviously not connecting , and, can call to any other numbers as an office or home number. So the problem is the new digit in the mobile numberEcuador has added an extra digit to mobile phone numbers but apple wont accept 10 digit phone numbers so we cant use facetime or apple IM or verify our new phone numbers. ( and Siri won't work either!) I have contacted apple support online but can't request a call back as the apple system says our new phone numbers are invalid. I am going to phone them tomorrow and you should complain too at http://www.apple.com/support/contact/. . The more people that bring this to their attention the faster it will get fixed
-
Just downloaded FACETIME on my 4yr. olf Imac running Snow Leopard. When making a call to my friend's Imac all works correctly going both ways. When my wife calls me via Facetime from her Ipad, I cannot click on "accept"- not there? When called by the Imac (newest), the "accept" or "reject" radio button appears for me to click and connect. On my wife's Ipad the two radio buttons always appear when a call actiivates Facetime and comes on?
There is nothing I can find in "Preferences" in Facetime to turn that on or off. I suspect it has to do with having a more current operating system; that the "controls" are in the operating system? [I'm guessing] It's frustrating getting Facebook calls from several friends on Ipads! Any ideas...VFPI suspect it has to do with not having a more current operating system
Exactly, what Apple is doing is leveraging new features only on newer OS X versions to force you to upgrade OS X to 10.7 or later.
What they don't tell you is 10.7 or later will NOT run your PowerPC based software, some of it you can't get Intel versions like for perfectly working printers, scanners and games etc. So it can be a very expensive OS X upgrade to 10.7 or later with third party software.
http://roaringapps.com/apps:table
Also they don't tell you is the risk in bricking your machine if the update goes badly, so you have to have AppleCare in case that occurs so it's on them to fix it. Else your paying money to replace the logicboard or buying a new machine prematurely.
A four year old machine can't have AppleCare, it's only good for 3 years from date of purchase new.
Your machine came with a boot hard drive, it's usually got about 4-5 years of life on it, then it needs to be replaced.
Also they don't tell you the newer OS X version has more abilities and features that causes your machine to slow down in performance, especially on older machines.
Also they implement new, idotic and extremely fustrating new user interface features in a arbitrary "you take it or leave it" manner with little or no fall back method.
So upgrading OS X is a gamble on older machines that otherwise would likely work perfectly fine for the next 5 years if one didn't need to have to mess with it.
Since Snow Leopard has slightly over 25% OS X version market share, your still good for security updates etc for the next few years if you just want to stay where your at and be happy.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
The Lions are, well, not so welcome due to Scott Forstall retard UI issues, OS X Mavericks 10.9 is likely going to fix things a bit better.
But basically what is occuring is Apple is trying to force a faster hardware upgrade cycle with the more expensive products by leveraging features on the smaller devices that expire sooner.
Apple is a hardware company that leverages whatever it can to get you to buy more hardware, it's why they are as rich as they are. -
my phone will no longer play music through headphones or on speaker but will work when making a call on both headphones and speaker. Also when I plug in my iPhone to a jack that uses a power amp like external speakers it works fine. I have no idea whats going on i've restored it twice and still nothing.
did you update your phone?
Maybe you are looking for
-
I want to update my IWorks which I have downloaded with another Apple ID in this same computer. What I have to do?
-
Using a paramter to fetch data from database
Hello SAP, Is there a way to use a parameter that takes in the employee ID and have it fetch from the database the employee name. Just to note, the tables that I am using in this report do not link to the employee table that contains the employee na
-
Adding example to conbody with paragraphs after it
Is it possible to have an example in a conbody followed by paragraphs? We are trying to add an example followed by paragraphs within a conbody. However, our doc is invalid when we try to do this. So, we added example to the conbody element in the EDD
-
Formating field on the Adobe form
Hi All, I have a field matnr which is displayed on the adobe form with the leading zeros. Eg 000000000001003800, However I want this field to get displayed in the internal format such as 100-3800. How to get this resolved. Has anybody worked on the s
-
How to delete line item from delivery?
Hi Experts, Two Invoices are associated with one delivery delivery ,Now due to a system error, first invoice didnu2019t generate any accounting document, so we cancel it. On the other hand second invoice was ok so we leave it, now we need to canc