Making movie from project

Hi
I have a project in DV-PAL Widescreen, and i'm having a problem while exporting it to video
it exports at 4:3 ration instead of 16:9
in the settings of export i choose
Quicktime
compresso:r DV-PAL
Frame Size: 720x576 16:9
Pixel Apect Ratio: D1/DV PAL widescreen 16:9 (1.422)
And the movie comes out in 4:3 all compressed
Is this normal? am i doing something wrong?
tanks in advance for your help
Frederico

How are you viewing the exported file? It sounds like whatever you are using to view the file is what is using the incorrect aspect ratio.
As a quick test, import the exported QuickTime file into your PPro project and see what PPro thinks the aspect ratio is.
Cheers
Eddie
Forum FAQ
Premiere Pro Wiki
- Over 250 frequently answered questions
- Over 100 free tutorials
- Maintained by editors like
you

Similar Messages

  • Inventory management: return material to WH - move from project to stock

    Hi guy,
    I have this problem.
    I created a PO to buy a material at consuming, so I used into the PO the Account Assignment Category "P = Project". After I have created the GR with trx. MIGO and moviment type "101". The sytem generated a material document and an account document (cost VS invoice to receive). After I saved in the system the invoice verification (invoive to receive vs vendor).
    The broblem is that not all material that I bought went to the project. Infact I have used only a little part in the project. So now I have to take the rest of material and put them in my WAREHOUSE. (transfer from projet to stock)
    Problem: How can do this moviment ? I think I have to use the transaction MIGO ..but what type moviment I have to use?.
    I cannot use type.mov. 102, because I have already the invoice and the payment.
    I cannot use type.mov. 222, because I don't have GI type 221
    Thanks
    Roberto

    Hi
    Pls check ,once if you do GR for a PO with Account assignment P , then after MIGO, it will be consumed against the project, it will not be part of your inventory, Its a Project consumption directly
    Regards
    Amuthan M

  • Making movies from VHS tapes

    Hello, I recently found some old VHS tapes with home movies on them. Can I transfer them onto my G5 computer and then save onto DVD?

    This link may help.
    Powermac G5, 1.8DP   Mac OS X (10.4)  

  • Animated GIFs don't loop in exported movies from Keynote 3

    I am just getting started with Keynote 3.0 and really like what I have seen. I created a series of slides and pasted animated GIFs in various places. They are set to loop on each slide as Keynote presents the slides. The slide show has preset transition and build timings and there is music playing continuously, throughout the show. It works quite well. (However, there is very intermittent choppy audio and video playback when there are builds or transitions occurring. Any thoughts on optimizing this?)
    The problems begin when I ask Keynote to export the slideshow to a movie. The main problem that I am struggling with is that the animated GIFs don't loop in the rendered movie, regardless of which compressor I choose. I don't see anything in the documentation. I have also searched several of the discussions on making movies from Keynote 3 but have not specifically seen animated GIFs discussed. What am I missing here?
    Also, I want to be able to play this movie on a DVD player at an upcoming function. Any recommendations for an approach that will be best? I have QT 7 Pro and the iLife '06 suite.
    Thanks, in advance, for any forthcoming suggestions.
    eMac G4   Mac OS X (10.4.6)   1.25 GHz, 1 GB RAM

    My guess is, it's too much of a pain to have to calculate how many times it will actually loop and create the loops and then composite everything. Running it in Keynote just tells the thing to keep playing over and over till you do something that stops it. There's a BIG difference there as one is just being told to play, the other is having to be placed in a movie with an exact number of frames, so there are a bunch of calculations involved.

  • Partial Delivery of Materials from Projects

    Dear All,
    I have one scenario where, delivery of semifinished items from projects will take place partially i.e. to be despatched  in lot. As semifinished items are consumed in FERT item, while making delivery from project (cns0), in material components field, semifinished items are n't displaying for despatch.
    I would like request to put your suggestion on this.
    Thank you in advance.
    Regards,
    Biplab

    Hi,
    The scenario  is like this. FERT item will be asigned to network activity of project. Afterwards MRP run to generate the requirments for BOM components e.g. FERT / HALB item. FERT item will be manufactured by consuming HALB items. On readiness FERT, the  same will be inspected & dismantled into HALB items. All HALB items will be despatched in lot.
    While making delivery in cns0, only FERT item quantity is coming. But i need to deliver HALB items only.
    Request you to suggest me on this.
    Best Regards,
    Ranjan

  • Making Duplicates from DVD not files saved

    I have been reading a lot of the discussions and I think I am understanding that after making a DVD from iMovie I can delete all files. I am making movies from stills in iPhoto so I keep the original photos. Can I just duplicate at a later time the DVD for more copies? I do not anticipate making any changes.
    I have not deleted anything yet.

    Can I just duplicate at a later time the DVD for more copies? I do not anticipate making any changes.
    If you are simply wanting to be able to make clones in the future then you can copy one of your finished DVDs using Disc Utility, which has full instructions on http://docs.info.apple.com/article.html?artnum=42724
    Therefore keep at least one master backup copy or use Disc Utility to create the disc image and keep it on a hard disc if you have the space.

  • I have Iphoto library in Aperture.  Can I move the projects from iPhoto to aperture project by dragging?

    I have Iphoto library in Apeture.  Can I move the projects from iPhoto to aperture project by dragging (within the apeture program)? Is this making a duplicate of all the photos? It seems to work??  It then leaves my Iphoto library in apeture empty.  I would like to do this just to reorganize the photos between the two.  I feel that I may have doubles and would like all pictures of one year in same project in Aperture instead of going between both.

    Tell us more, please. I am not quite sure, what you want to do and how you are using Aperture and iPhoto?
    Which versions of Aperture and iPhoto are you using?
    Do you have separate photo libraries for Aperture and iPhoto, or are you opening your iPhoto libraries in Aperture?
    I have Iphoto library in Apeture.
    Did you import an iPhoto library into Aperture?  And now you are seeing a section "iPhoto Library"  in the Aperture projects list in the Inspector?
    Events and albums you imported from iPhoto (Import > Library > Some iPhoto Library) will be imported as Aperture projects and albums, and they will behave exactly as other Aperture projects and albums.
    Can I move the projects from iPhoto to aperture project by dragging (within the aperture program)? Is this making a duplicate of all the photos? It seems to work??  It then leaves my Iphoto library in apeture empty.
    You can drag images from any project in Aperture to other projects and that will move (not duplicate) the images and all its versions to that project. And when you drag all images from the project to another project, the remaining project will be empty and can be deleted.  (Caution: Photos that you have hidden in iPhoto will not be visible in Aperture. If you are not sure, if you have hidden photos, open the library again in iPhoto and unhide all photos).
      I feel that I may have doubles and would like all pictures of one year in same project in Aperture instead of going between both.
    There should be no problem with moving all photos from the same years to the same projects. You can also drag projects in "Projects" view on top of each other. That will merge them.
    You could also define smart albums in Aperture to search for images taken at a specific period of time:
    File > New > Smart album:
    Then, in the Smart Settings HUD, click "Add Rule" and add a Date or Calendar rule.
    For example, to find all images taken in 2010, use a rule "Date > Capture Year is > 2010"
    To search for Photos taken at a specific date or at several dates, use a "calendar" rule. This way, you do nat have to type the date, but can pick it from a mini calendar.

  • I made a video in imovie and saved it, now i want to carry on making it from where i left but every time i try to add an image onto the end it just goes tot he wrong part of the movie, how do i just add it onto the end?

    I made a video in imovie and saved it, now i want to carry on making it from where i left but every time i try to add an image onto the end it just goes tot he wrong part of the movie, how do i just add it onto the end?

    Have you seen my User Tipp here
    "Movie Magic" with Stills and Dissolve
    When you 'prep' your stills in any 'picture app', you can do a lot of marvel by simply applying dissolves.
    In your case, I would create a white document (in Pixelmator, Keynote, Photshop, online at pixlr.com, whatever ...) and another with your logo (and further more ones with additional logos). Drag the jpgs into your iMovie Project and apply dissolves  - tadahh! - logos appear on white.

  • IMovie9: How to stop old movie from showing on upper left side of screen? I only want to see current project. Go away, old movie...

    iMovie9: How to stop an old movie from showing on the upper left side of screen? I only want to see current project. Go away, old movie... I am making a video from imported images now  visible to right and partially at bottom...), and do not want to see the older video that demands my attention on the upper left, that will not seem to give me a "close this project" option. What obvious thing am I missing here? Thanks, Lena

    Nevermind. It finally let me make it stop...

  • How to move a project from one library to another?

    I merged too many iPhoto libraries into one very large Aperture library,  It takes too long to load up even though I'm using a Thunderbolt external drive.  So I'm exporting some of the projects as new libraries.  After doing so, I discover that some of the remainig projects in my large Aperture library really belong in one of the new libraries I created.  But I haven't found a way yet to export or move such projects to the new library I created on the same external drive.  Does anyone have any suggestions?

    I thought I said that?
    And I thought you meant that, but I was not sure, if "export the projects" implies necessarily "export as library" - it could mean "export the versions/originals from the project" and reimport them - just to be sure no offence meant.

  • How to move iMovie project from one computer to another

    I have been working on an iMovie 09 project on my desktop at home.
    Now I want to work on the same project on my computer at work.
    How can I move the project from one computer to another?   What I've already tried was to make a duplicate copy of the project and then use a thumb drive to move that to another computer.   It didn't work.
    Thanks for your help.

    Hello James Snedeker,
    After reviewing your post, it sounds like you want to move a file to another disk. I would recommend that you read this article, it may be able to help the issue.
    iMovie: How to Save Projects to Another Hard Disk
    To copy an iMovie project to another disk:
    1. Quit iMovie if it is open. 
    2. Locate the project folder in the Finder.
    3. Drag the project folder to the other disk.
    Note: You must move the complete project folder, intact, to the other disk in order to successfully copy the project. The project folder has the same name as the project listed in the iMovie window. This folder includes the iMovie project file, as well as a Media folder, which contains all of the clips associated with this project. If you don't copy all of these items, the project may no longer be readable in iMovie.
    Once you have copied the project, try opening it in iMovie to ensure that it copied to the other disk successfully.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • How can I move my project from external hard drive to my macbook pro?

    How can I move my project from external hard drive to my macbook pro? every time I try to do some editing, the sequence is very slow, thanks in advance

    Try here...
    Setting-up a new Mac from an old one, its backups, or a PC

  • How do I move a project from an external drive back into Imovie

    I recently bought an Iomega external hard drive to store documentary movies so that I wouldn't jam up my Imac's free space. However, after I moved an imovie/idvd project to it, and wanted to make changes, I could not move the project back into the Imac's drive. (It also would not burn from the external, giving me a multiplex error) When I tried to move the movie back into Imovie on the Imac it said Quicktime couldn't parse it. I saw various posts about parsing, but not about specifically about moving a project from an external drive. Can anyone offer any suggestions? It seems to me that I should be able to move a project back and forth without that much trouble.

    Sounds like you have a DVD format (MPEG-2) and not an iMovie Project file.
    The key phrases are "multiplex" and "parse". Both suggest MPEG-2 format when opened in QuickTime. It would also throw an error -2048 message if MPEG-2.
    But another issue could be the file format of the external drive. Most ship pre-formatted for the Windows OS's but a Mac user should format using HFS+ (and others). If you didn't format the drive before moving the large iMovie Project onto it it may have become severely fragmented if the external used FAT 16 or FAT 32 (very common) formats. They have a 2 or 4 GB file size limit, respectively and would have made your Project unreadable when moved back and forth.
    Use the Disk Utility app to find out the format of your external drive.

  • How do I deleted a movie from an iDVD project

    I created an iDVD project using a movie, and have decided to go back into iMovie and make changes to the movie I am using for this project. Since I have put so much time into putting photos and music in submenus, I want to use the same project I created, just replace the old movie with the new. I cannot figure out how to delete the old movie from the project. I have shared the new one thru Media Browser, and it is ready to be added, but I first need to delete the prior version from the iDVD project.
    Anyone know how to do this? Thanks.

    READ THE ENTIRE MESSAGE BEFORE DELETING ANYTHING !!!
    To delete a movie from iDVD: Open iDVD. Click once on the movie title to highlight it. Hit Delete. It should disappear in a poof of smoke.
    If you have chapters in your movie, you need to delete the Scene Selection text button also.
    But, when you reopen iDVD after changing your movie, before doing anything in iDVD, iDVD should give you a message that your 'assets have changed' and ask if you want iDVD to update. Click on yes/ok, but check your iDVD project before burning. The way it is supposed to work is that iDVD recognizes that you have made changes to your iMovie, uses the revised iMovie in its files instead of the first one, and uses the updated iMovie when you burn to disk or create a disk image. It is a nice feature so that you do not have to delete the iMovie already in iDVD and have to put in your updated newer version; iDVD is supposed to add the update itself, using the newer version of iMovie. It worked that way in iDVD 6.
    However, if you have an iMovie with chapters, what happens with iDVD 8/9, as opposed to iDVD 6, is that iDVD does indeed recognize the changes and sends the 'do you want to update' message, but if you tell iDVD to go ahead and update, the chapters will no longer select correctly. They all will default to the same chapter no matter which one is selected.
    I can't tell you whether or not iDVD will correctly play the updated movie if you don't have chapters. You will just have to try it.
    If you do have chapters and/or incorporating the changes in iMovie does not work, the only 'fix' is to recreate the iDVD project. It takes time but is not difficult since you have done it once. Open a new iDVD project and put the updated iMovie into it. Do a "Save as Disk Image" to create a disk image file of your iDVD project. Play the disk image file with DVD Player. If it plays correctly, burn your disks from the disk image file using Disk Utility or Toast. You can delete the old iDVD project.
    Good luck with it!

  • How do I move a project from one library to a different existing library in Aperture 3.2.3?

    How do I move a project from one library to a different existing library in Aperture 3.2.3?

    Export as a Library, then import into the second (already existing) Library.
    From the User Manual:
    In the Library inspector, select the items you want to transfer, then choose File > Export > Items as New Library.

Maybe you are looking for