Making multiple tracks from one big track

I've got a CD that has 7 songs on it, but only shows as 1 long track (54:06) when I try to import it. I'd like to edit it so it imports/plays as 7 songs and not 1. I've figured out how to mark/edit the first song, but that's all. How can I reimport the original song so that I can do the other 6 tracks? I've looked at a lot similiar postings, but there were no answers. Apparently this is a problem a lot of people are having. Any suggestions would help. Thanks.

As i mentioned earlier, by selecting to convert the original song it is just making a copy of the song, and you do not have to have the CD to do so. Just select the song you want to duplicate and then select convert to...(whatever file format you want).
Hope this helps
-Stephen

Similar Messages

Making two mono tracks from one stereo track?

I've used the M-Audio MobilePre USB device to record vocal and guitar at the same time. In GarageBand, this inputs as one track, with guitar on the left channel and vocal on the right.
I'd like to separate this one stereo track into two mono tracks for further mixing and editing.
Any ideas on how to do this?
Thanks!

therealkenrg wrote:
I'd like to separate this one stereo track into two mono tracks
http://www.bulletsandbones.com/GB/GBFAQ.html#stereotomono
(Let the page FULLY load. The link to your answer is at the top of your screen)

Make multiple clips from one music track

How do I trim my music track so that I can edit out parts in the middle--not just the ends?

do the following:
1. create the two different instrument tracks, let's say instr1 and instr2
2. got to the environment window and search these two tracks and drag them a bit aside
3. choose New/Transformer
4. drag the Transformer object in the neighberhood of the two instrument tracks
5. cable the output of instr1 to the input of the transformer object
6. cable the output of the transformer object to the input of the instr2 track
7. go back to the arrange window
8. select instr1 and enjoy!

How to separate/split different drum tracks from one recorded track

Hi,
Pretty hard to explain my intentions in the title, but i've recorded drums with one mic (so there's only one track), and i was wondering whether or not it's possible to separate the hi-hat, snare, toms, etc. from each other? So basically i want to create separate tracks for each of these sounds. I know it's a tricky and pretty specific question, but this would really come in handy since you can replace the drum sounds.
The biggest problem, if this were possible, is to separate tones that are recorded at the same time.
And yes, i tried the manual, but i couldn't figure this one out.
Thank you very much
Message was edited by: Goossens.Fre

Goossens.Fre wrote:
The biggest problem, if this were possible, is to separate tones that are recorded at the same time.
You are right: This is impossible.
The next best thing is to use Flex Time to find the attack transients and then split the audio at those transients, so you can move the individual snippets to different tracks.

How can i move a podcast track from one podcast to another?

I subscribe to a number of podcasts and recenly some of them have started downloading to new podcast folders (One of them underwent a slight name change, and the others I'm not sure why). So now, some of my podcasts have two folders: one with the old podcasts and one where the new podcast download to. I want to keep all the tracks, because I reference them from time to time, but I hate having these extra folders. Is there some way to move podcast tracks from one podcast to another so I can consolidate these tracks?

Use export/import.
Regards,
John

Can I convert tracks from one format to another so that the converted tracks appear in the various playlists of the originals?

I have a large number of tracks which I should like to convert from one format to another (aiff to Apple lossless). These tracks are distributed in a large number of playlists. Can I convert a track or tracks from one format to another so that the converted track appears in the playlist of the original track without going through a laborious and error-prone process of converting each track individually, determining the playlist of the original, and allocating the converted version to the playlist (or playlists, because in many cases the original track exists in more than one playlist) of the original track.

I do not believe iTunes will do this. The files created are essentially new media files, not regarded as replacements for old files. There may be ways to trick iTunes if you are good at editing library files but that would be more trouble than it is worth.
You can check the site below but I do not recall having seen such a script.
Dougscripts - http://dougscripts.com/itunes/scripts/scriptcount.php?sortBy=Name&op=y - Many itunes scripts
If you're into writing Applescripts you could try it.

Move tracks from one project to another?

I'd like to know if there's a way to move tracks (with or without inserts, automation and other stuff) from one project to another.
I have a project containing a working mix of a song that I've spent many hours assembling. One of my bandmates sent me parts he tracked in GarageBand, two audio tracks and one track using a MIDI instrument. I imported the GB file into LE and made some edits. I'd like to bring those three tracks into my current mix.
I understand that I can bounce each track out individually, then re-import them on new tracks in the mix project, but this means turning off all the inserts and EQ on each track and blah blah blah, it seems like there must be an easier way. Being able to directly move or import the tracks would preserve my editing flexibility in a way that bounces won't.
Please, any suggestions may prove valuable.
Thank you for your time.

...let me also re-emphasize: the GB2 file was imported and converted and tossed. I am trying to move tracks from one Logic Express project to another Logic Express project.
Just to be perfectly clear.

Best approach to migrate tracks from one 7.0 NWDI to 7.1 NWDI

Hi,
We are looking into options to migrate our tracks from one NWDI to another NWDI. The situation now is that our production NWDI systems is running on NW 7.0 SPS10 (very old) and now we are about to start doing some development on 7.1.1 CE.
We would like to install a new NWDI system based on NW 7.1.1 CE, in this case this NWDI will use the same SLD system that our old NWDI system is using, meaning that all the SC will be already there, naming convention will be the same too.
Is there any way to export/import the track information from NWDI? is there anyway to export/import versioning information and code from NWDI/DTR?
Has anybody done something like this? which was your experienced?
Thanks in advance for all your help,
Zareh Vazquez

Hi Zareh,
Following link might help you:
<<http://help.sap.com/saphelp_nw70/helpdata/en/46/5d032c1e661cbee10000000a11466f/content.htm>>
Regards,
Bhagya

Migrate tracks from one server to another

Hello, I've read a few guides how to migrate tracks from one server to another, but it doesn't help me.
What I've done:
1) I've exported my SC from SLD at my old server
2) Then imported it at my new server
3) Updated CMS from SLD
4) Created a track at my new server and added imported SC
Then I have to import my SC from old server with sources and there is some errors happens for me.
First option: I have exported my SC from CMS, but the SCA file is about 5kB. I unzipped it and there was ARCHIVESOURCE folder but it hasn't anything seems to be my sources. That file is checked-in successfully through the transport studio, but no sources imported into DTR.
Second option: I have exported the SCA file by using NWDS. It's exported OK, size ~1.3MB, ARCHIVESOURCE folder with mine sources. But when I try to check-in it, it fails with an error "import failed, because the sources are not contained in the archive
Could anybody helps me to achieve my task? I stuck with source import.

Hi Kirill,
important to know that assembly ALWAYS uses the CONS/ACTIVE workspace for SCA generation.
If you for instance create a change (an activity), and you activate and release it but you don't import this activity into CONS, then it won't be part of the CONS/active and then due to obvious reasons assembly won't produce the sources either (no possibility to do an explicit activation on cons level as here a force activation takes place at import, but of course the import into cons is a necessary step, because as mentioned assembly uses the cons/active).
Can you please confirm/deny how this scenario looks like on your end?
Thank you!
Best Regards,
Ervin

Copying an entire software instrument track from one project to another

Hello,
Is it possible to copy or import one entire software instrument track from one GB 3.0.2 project to another? At the moment I've got to copy a region from one project, open another project, paste it in the 2nd project, and open the other one again (which appears to close the 2nd project) to copy the second region. This is incredibly cumbersome because I can't have both projects open at the same time.
Has anyone found a less tiresome method to do this?
Thanks
Hiranya
Powerbook 15" Hi Res 1.67 GHz 2 Gb RAM Mac OS X (10.4.6)

The easiest work-around I can imagine is to join all regions of the track and copy that. Another option is to freeze the track, which will turn it into normal audio. You might also add your MIDI parts to the library. That will avoid the need to switch between projects, but does require one or two more actions.

Moving Tracks From One Session To Another

I have a two DVD project that has one session for each. I wanted to know if there is a way to take a menu and track from one session to the other without having to build the track and menu buttons again. Somewhat like importing session data in pro tools if that helps. Thanks.

You can export the descriptions of the items then import them into the project you would like to bring them into. May have to relink items, but alot of it will be bought it.

To Move Multiple Files from one directory to another.

Hi,
I need to move multiple files from one directory in UNIX (application server ) to another. I need something like an FM 'STRALAN_COPY_FILES' which is also valid in ECC 6.0.
Thanks in advance.

Hello Sachin
Below you see a copy of how to use EPS_FTP_PUT using transaction SE37.
Import parameters               Value
RFC_DESTINATION =                 NONE
LOCAL_FILE             =         filename
LOCAL_DIRECTORY   =              /dir1/dir2
REMOTE_FILE             =        filename
REMOTE_DIRECTORY   =             /dir1
OVERWRITE_MODE        =          F        " force -> overwrite existing file
TEXT_MODE                    =   B               " binary
TRANSMISSION_MONITOR            X       " display transmission monitor
*RECORDS_PER_TRANSFER            10
*REQUESTED_FILE_SIZE             0
*MONITOR_TITLE
*MONITOR_TEXT1
*MONITOR_TEXT2
*PROGRESS_TEXT
*OBJECT_NAME
Regards,
Uwe

Moving multiple queries from one category to another in QM

Hi All,
Is there is any way of moving multiple queries from one category to another in the query manager?
Or is the only way of doing it by saving each one individually into a different category.
Any ideas ?
Regards,
Rakesh N

Hi Rakesh,
The query manager has limited function compare with normal file management applications. Under current design, you have to do this one by one. You just need to make sure move the smaller amount of queries to large category. Category name can be changed easily.
Thanks,
Gordon

Add to Multiple Tables from One Page

Hello,
I am building an application that handles hardware inventory (APEX 4.0). I have an input page that adds data to two or more tables all at once. The page has two forms on it that point to two separate tables. However when I try to run the page, it fails and returns an error:
ORA-06550: line 1, column 437: PL/SQL: ORA-00904: "ORH_LAST_UPDATE_DATE": invalid identifier ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
     Error      Unable to process row of table IDD_ID_DATA.
So far as i can see within the App, that column is not at issue (I am not even doing anything to it and it is nullable). I have looked into the App itself as well as doing some online research but have found nothing helpful...
So my question is this: Is it possible to add to multiple tables from one page? If so how do I do it?
I am new to APEX so any help would be greatly appreciated!

UPDATE:
I received an email from the APEX Support Team:
"The simple answer is that you will need to manually code the DML (and query) processes if you wish to maintain multiple tables from one page (There is a limit of one table when using the built-in processes).
In order to do this I suggest you delete the processes generated by the wizards and create PL/SQL processes with insert, update, delete statements as necessary. Such coding is not difficult but is more time consuming than when you can use built-in processes."
I have been playing around with PL/SQL code and the end result is this:
begin
     INSERT INTO table1
     VALUES(
          :P2_Item_Field1,
          :P2_Item_Field2);
     INSERT INTO table2
     VALUES(
          :P2_Item_Field1,
          :P2_Item_Field2);
end;
I used this code in a custom PL/SQL Process in the Processing>Processes section of Page Processing and it seems to work fine now. The only downside to this method is if the name of a Page Item is changed the code will also have to be changed. Other than that i have had no problems.

Scenario of multiple Asset from one AUC/WBS

Hello,
I am having a requirement, where I need to create multiple Asset from one WBS. I checked in the system and able to create more then 1 Asset for WBS.Also if I maintain the distrubution rules for those Asset then settle it accordingly to different Assets.
I just wanted to confirm, will it we the right way of handling this scenario? My main concern is this involves intervention of user for maintaing the settlement rule during final settlement.
Is there any other way to handle this scenario?
Thanks
Sarang

Hello Virendra,
I am not using Investment Managemnt. What do you mean by IM profile?
I understand that I need to maintain the source of cost in Source structure. But even in that scenario the user has to go and maintain settlement rules and create multiple Asset against one WBS.
So how do I tackle it, if client requirement is such that they want to create only one AUC, but during final Asset creation they want to create multiple Assets from one AUC. They dont want to have WBS for each Asset.
Thanks
Sarang

Making multiple tracks from one big track

Similar Messages

Maybe you are looking for