Making my Powerbook g4 into a full time desktop

I want to know if i can run a 26" SHARP AQUOS display with my 1.5GH G4 powerbook with a 128MB graphics card. I want to make my powerbook a full time desktop and i want to close my shell while in use (can i do that?). Let me know if thats possible. i also use expose' alot. Thanks - Richard

Aquos 26" TV - 1366 x 768 resolution
15" PowerBook - 1440 x 960 resolution
23" Apple Cinema Display - 1920 x 1200 resolution
This TV has nearly 40% fewer pixels than a 15" PowerBook and these are spread over almost twice as much screen space. (I think you may need to use an S-video connection, as well.) If you ask me, you'd be much better off getting a 23" Cinema Display and an Elgato EyeTV box than an using an Aquos television as a display.
It is no problem using the PB with the lid closed (clamshell mode). They are built specifically for that. You will only need an external monitor, keyboard and mouse.

Similar Messages

Is it possible to create a formula that converts a resource hours into full time units in project server 2010

Hi
Is it possible to create a formula that converts a resource available hours into full time equivalent units in project server 2010? Say a resource has 160 available hours for any given month this will translate into 1 FTE for this month. If it is 80 hours
for that month then it will be 0.5 FTE and so on and so forth.
Thanks,
-Maurizio

Maurizio,
It's a bit late, but there are two OLAP cubes that can provide you with this information in a pivot table in Project Server 2010.
"MSP_Portfolio_Analyzer" and "Resource Timephased" contains capacity measures that be used to provide calculated measures when the cube database is generated. You change OLAP cube configuration in "Server Settings -> Database Administration -> OLAP
Database Management". In either of the aforementioned cubes, use "Calculated Measures" to create two measures:
Member Name
MDX Expression
Available (FTE)
([capacity]-[work])/[capacity]
Work (FTE)
[Work]/[Capacity]
These two fields will appear in the pivot table field list as "Values", and when combined with a "Time" column, can give you a picture of FTE usage and availability.
I prefer the portfolio version since it contains project/assignment data and resource data, letting you see just how resources are being utilized.
One thing I have not been able to get around is getting ""Maximum Units" for a resource factored into the measure. A common practice is to allocate more that "100%" to generic resources to represent teams for planning purposes. The OLAP measures will show
only 0.0 to 1.0 FTE for any resource, even if a resource represents more than one body.
If you have an SSRS query you could share, I would appreciated it!
Hope this helps!
JTC
JAckson T. Cole, PMP, MCITP

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the b.u. stops

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

2x LabVIEW Systems Engineer Full Time Positions – Sheffield and Bristol, UK

2x LabVIEW Systems Engineer - Full Time Positions – Sheffield and Bristol, UK
1.0      Description:
As a Systems Engineer, you'll be part of a team that is responsible for developing both hardware and software applications based on Object Oriented Technology and Event based Architecture primarily in the LabVIEW Programming Language and National Instruments Hardware Platforms. You will help customers from all kinds of industries on various issues, from getting started with LabVIEW software, to help with programming, debugging and onsite commissioning of complex systems including distributed embedded systems. There will also be items such as creating demos and working on proof of concepts. You must exhibit strong problem solving, communication and business acumen skills alongside a passion for technology. You will get the privilege of an insight into the engineering practices from a range of industries and be providing a consultancy on their system requirements.
2.0      Duties and Responsibilities:
The duties and responsibilities of this position include, but are not limited to, interacting directly with customers to program, train, inform, advise and consult in the design of their applications using the best test and measurement hardware and software by:
◦     Programming memory and speed efficient applications using LabVIEW and Object Oriented Programming and Event-based architectures.
◦     Developing intuitive GUIs.
◦     Selecting the correct measurement hardware for a given application based on a customer’s specification.
◦     Providing timely, accurate and effective solutions to technical problems.
◦     Providing guidance on the installation and working functionality of both software and hardware, including explanation of configuration settings.
◦     Reproducing and troubleshooting problems and incompatibilities in both software and hardware.
◦     Delivering professional and high quality, customer education courses.
◦     Delivering technical presentations and demonstrations to customers, colleagues and partners.
◦     Remaining aware of all competitive products and how they compare technically with Austin Consultants' core products.
◦     Working with the business development team to develop proof of concepts for customers.
◦     Travel 50% of the time.
3.0      Qualifications & Requirements:
◦     Minimum 2.1 honours degree in engineering or science related field, such as Electrical/electronic engineering, physics, mechatronics or computer science.
◦     Firm understanding and knowledge of National Instruments LabVIEW and TestStand, including LabVIEW FPGA and LabVIEW Embedded.
◦     Understanding of object oriented principles.
◦     Ability to pass CLA exam within the year.
◦     Knowledge and experience in instrumentation & control, and industrial automation is required.
◦     Experience with all National Instruments hardware platforms, including DAQmx, cRIO, PXI, SCXI and cFP.
◦     Practical electrical debug experience.
◦     Experience in a second language of JAVA, C and C++ is preferred but not essential.
◦     Ability to learn new skills/languages/applications quickly (MATLAB, JavaScript, STK, etc.).
◦     Must be able to handle multiple tasks and enjoy working with people.
◦     Strong problem solving skills to analyse the problem and think creatively to provide a solution.
◦     Excellent written, oral and presentation skills are key.
◦     Ability to deal effectively with customers to make them successful is essential.
◦     Ability to get along with others and function as a team player as well as work effectively alone.
◦     A proactive/can do attitude is vital and a happy view on life.
◦     Legal right to live and work in the UK. Sponsorship is not available.
◦     Must hold a full clean and valid UK driving license.
4.0      Location:
There are two positions for this role, one in Sheffield, South Yorkshire, UK and one in Bristol, UK
5.0      Reporting:
Systems Engineers will report to the Technical Director.
6.0      Salary:
Competitive salary based on level of experience.
7.0      Application:
To apply for this position please send a copy of your CV to
[email protected]
Please state the job title of LabVIEW Systems Engineer and the location for which you are applying in the email subject.

Hello,
I Aravindu.P completed M.Sc(Electronics & Instrumentation).I have one year experience working with Labview and embedded systems programming(Software and Hardware).I am very hardworking and sincerity.I want to working with industries like this.So please reply me.
Attachments:
Aravind_Resume (1).docx ‏18 KB

Part Time, Contract Based, and Full Time Positions available for LabVIEW Developers

Mindready (www.mindready.com) is looking for flexible, hard working individuals to fill part time, contract based, and full-time/permanent jobs in LabVIEW development positions. We have immediate needs for contract labor in Dallas, TX; NY; Huntsville, AL and Austin, TX, as well as other locations. US Citizen and Security Clearance required on some projects. Mindready is a certified National Instruments Alliance Partner with facilities in Montreal, Austin, TX and (Radical Systems, Inc. – a mindready company) Huntsville, AL (www.radicalsystems.com).
The duties of the positions include:
• On and off-site LabVIEW development work. May involve TestStand, instrumentation such as PXI and stand alone instruments, DAQ, Motion, Vision, etc.)
• Willingness to travel for periods as short as 2-3 days, to as long as 6 months. (Ideal candidate would be local to any long assignment)
• Integrate into customer’s development team to design and modify new/existing LabVIEW applications.
The ideal candidate would possess the following skills & qualifications:
• Intermediate-to-advanced knowledge of LabVIEW (a pre-employment test is required)
• Broad technical knowledge is a plus, we serve a wide range of application areas
• Excellent writing, communication (English), time-management, and interpersonal skills.
• Ability to travel for on-site work at customer facilities for jobs as short as 1 week, possibly as long as 6 months.
• Discipline and organization with respect to software development and maintenance.
• Engineering, Technical or Computer Science degree or appropriate experience
• Certification is not required but would be beneficial
Pay is commensurate with skills and qualifications of the applicant. Compensation will include a competitive hourly rate.

Hi
I completed my M.S in electronics engineering and working with GE in INDIA since June 2005. I have total 20 months of experience with LabVIEW and have the follwoing skills.
Intermediate-to-advanced knowledge of LabVIEW.
Ability to analyze empirical data against theoretical predictions to enhance and improve mathematical model of system.
Familiarity with data acquisition concepts and hardware.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
you can reach me at [email protected]
Thanks & Regards
Anil Punnam

Infotype 0007 default for full time employee

Hello,
We have a requirement where in infotype 0007 should by default consider all the employees as full time employee. We have an interface that gets HR master data from AS400 into HR infotypes. The interface is filling infotype 0007 with emp percentage as '0', this is wrong but we do not want touch the interface and at the infotype level we want to default emp percent to '100'.
I have enhanced the 0007 module pool and hard coded empct to '100.00'.
But I would like to know if this can be done by any standard customization?
Thanks,
Muktar

As a best practice please try not do hard code ur logic - this can be achieved through Feature SCHKZ.
The shift indicator is suggested as a default according to employee
group and subgroup in infotype 0007, Planned Working Time.
The return value of the feature is a shift indicator from table T508A - Work Schedule Rule.
Try to default ur work schedule rule which must default ur employment percentage field in IT 0007.
Hope this helps,
Regards,
Regi

Why do I have to sign into iTunes every time I open iTunes?

Why do I have to sign into iTunes every time I open iTunes? Before I stay signin until I logout and signin again if making a purchase.

its really annoying since nobody uses my computer and its password protected.... But like sometimes it does happen where i have to put it in, and other times it doesn't

Would you like to work as a Full Time SAP CRM Consultant

If You are in USA and looking for a Change or Students who did their Interns into SAP CRM and Looking for a Full Time Position.they can reach me on 908-548-0708
Regards,
Chintan

Forum Name: Rich Internet Application Development.
Description Text: General questions about Rich Internet Applications.
Forum Category: Scripting Languages.
Location of Forum: Scripting Languages.
Award Points (Y/N): Y.
Corresponding Development/Content Area: Scripting Languages.
Name and User ID of Moderators:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=eqxfqtptf%2fc%3d">alvaro Tejada Galindo</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=csxelp5hzpi%3d">abesh Bhattacharjee</a>
Name of Sponsoring Product Manager/Solution Manager: <a href="https://wiki.sdn.sap.com/wiki/display/EmTech/Scripting+Languages">Scripting Languages WIKI</a>
Reason for the Request: RIA's like Flex, AIR and OpenLazlo are getting bigger in the market. They can be linked to SAP to make richer UI's. A RIA's forum would help newbies to get in touch with those new technologies and also, would help Scripting Languages authors to share knowlegde.
My approach -;)
Greetings,
Blag.

Firefox does not remian logged in once I close a webpage. Fore example, I have to log into Facebook every time I visit the page. Same with Google.

I checked the setting to make sure the box is checked for remembering passwords. But the browser does not prompt me to remember passwords and then it logs me off everytime I browse out of the webpage.

The "remember me" checkbox instructs the site to set a persistent cookie in Firefox. Persistent means that the cookie is marked with a future expiration date so that Firefox retains it between sessions.
There are a lot of ways to break this. For example:
* Visit the site in a private window
* Change Firefox's default setting of accepting persistent cookies from all servers (first party and third party)
* Set Firefox to clear cookies at shutdown
* Install add-ons that clear cookies
* Use external cleaning/security/privacy software that clears Firefox cookies
If you're not sure about your cookie settings, check out the Privacy panel of the Options dialog:
orange Firefox button (or Tools menu) > Options > Privacy
If you have "Firefox will: remember history" then cookies are accepted and retained.
If you have "Firefox will: use custom settings for history" you can check your cookie settings below that line.
If you have "Firefox will: never remember history" then you are going to be using full time private browsing and cookies are discarded between sessions.
If cookie settings are okay, and you would like advice on your extensions, it would be helpful if you could post a list of them. Open the Troubleshooting Information page using either:
* Help > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the upper left corner, click the Copy text to clipboard button, then paste into a reply.
After previewing, you will see there is some extra information below the list of extensions that you can edit out if you like.

I keep having to log into itunes multiple times

This is really frustrating. I keep having to log into iTunes every time I turn on my iPhone or iPad. It happens multiple times each day on all of my families devices. I'm not sure what is wrong. Any help is appreciated.

This can happen for different reasons. Permission issues derived from a cornucopia of other issues, security programs interfering with the login issue, bad sectors in a disk and I think only Adobe has a full list of the known reasons.
I wouldn't think this is a connection issue too, but check with Adobe support to see if your license is really activating and deactivating or just keep activating like mad.
Anyway, I would try to delete the OPM.DB file first and try to log in again. Check the solution 2 in this document: http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html
If that doesn't work, check the logs: http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
Go Win+R, type %temp% e look for 2 files, PDApp and ooblib. Check for ERROR and FATAL entries.
There other steps you can try too, but these are the ones I would go for, first.

Why does the newest FF keep me signed in to websites when I log off despite being set to full time "private browsing"? This is a real problem on a shared computer!

Despite being set to full time "Private" mode, this latest version of FF keeps me logged into things like ebay etc.
This has never happened with previous versions and is a real problem.

Are you restoring pages from the previous session if you start Firefox?
*https://support.mozilla.com/kb/Session+Restore
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
If clearing the cookies doesn't help then it is possible that the file cookies.sqlite that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete cookies.sqlite-journal and cookies.txt, if they exist, in the Firefox Profile Folder in case the file cookies.sqlite got corrupted.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

I am currently a full time college student and last term I had access to the creative cloud products, when I attempt to access InDesign I am asked to purchase products. Please help.

I am currently a full time college student and last term I had access to the creative cloud products, when I attempt to access InDesign I am asked to purchase products. Please help.

Do you have a subscription that you purchased and still pay into? If so, contact Adobe support thru chat and see if they can assist you with your subscription.
Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )
Did the school provide your access for free? If so, check with the school to see if they still provide free access to the software for students.
If neither of the above situations match yours, please provide more detail regarding what gave you access to the software.

I'm unable to sign into my face time

I'm unable to sign into my face time. It keeps making me verify my email which I've done numerous times and I've been to settings but nothing. Help?

OK, I called Apple Support (since the iPad is brand new) and got a rep to fix the problem. He manually sent a verification email, which I received, and I was able to complete the process and get Facetime working. For some reason, the Apple ID and password (as far as the iPad was concerned) needed verification. Don't know why, but am glad it is now working!

I paid for exportpdf and everytime i try to use tool on pdf, it asks me to subscribe. i have to log into website EVERY time. not acceptable. how can i export only form fields that were filled in?

i paid for exportpdf and every time i try to use tool on pdf, it asks me to subscribe. i have to log into website EVERY time. not acceptable. Some forms can't be saved so having to log in and only use webtool to upload a saved pdf won't work.
as well, how can i export only form fields that were filled in if I can get pdf to save to computer?

Hi kstine,
I can see why that would be frustrating! Have you tried selecting Stayed Signed In underneath the Adobe ID and Password boxes when you try to log in?
What did you use to create the PDF form? If you used FormsCentral, form data is saved to your online FormsCentral account. If you have Acrobat, you can export form data as described here: Adobe Acrobat X Pro * Manage form data files
Best,
Sara

Full Time Position interview questions and answers Please .

Hi Experts,
Please any body send me SAP HR Consultant full time position initial interview questions and answers for me? Including behavioral questions and answers?
Thanks and I appreciate your time.
Regards- Zubair.

https://forums.sdn.sap.com/click.jspa?searchID=9788674&messageID=4892316

Making my Powerbook g4 into a full time desktop

Similar Messages

Maybe you are looking for