Making my video into a Circle on screen

Not sure the exact wording. I'm trying to make my video clip into a circle on the center of the screen. From what I know I assume going to the motion tab and changing the size and distorting it should do it. It seems I can only make the video into rectangles, squares, etc anything with angles. Is there any way to round off those angles and shrink it so the video shows up as a perfect circle in the center of the screen?

Is there a way to do this and have another video playing in the background behind the video playing in the circle without changing the opacity of any of the videos. Around the circle background it is all black and if I changed the opacity to blend the videos the black would still show up behind the other videos. So I guess what I'm asking is: Is there a way to put a video in a circle without affecting the video behind it, just put it right on top?

Similar Messages

Is it possible to place a video into a circle frame for export as interactive PDF?

I've been trying to figure out how to embed video files into a circle shape frame for export as interactive pdf. Every time I export the document as interactive PDF, the video frame reverts back to a rectangle shape. Basically what I'm attempting to do is embed a .gif like animation of a face (saved as mp4 because it's my understanding that PDF can't support gif files) in a circle frame that plays on document load when exported as interactive pdf. Any suggestions, bypasses, solutions would be much appreciated.

Correct! Good solution!
But you missed a couple steps in your directions:
(1) Make a rectangle filled with Paper color.
(2) Make a circle filled with None (this will be the mask for the movie).
(3) Move the circle over the rectangle. Select both and choose Object > Path > Make Compound Path. This creates a paper-color rectangle with a hole.
(4) Position the rectangle-with-hole object over the movie to position the mask.
(5) Use the Buttons and Forms panel to make that object into a button. Give it an action of playing the movie.
(6) Choose File > Export > PDF (Interactive).
It works because the button (which has interactivity) is atop another object which has interactivity (the movie).
Brilliant!

How do I embed a small video into a larger video screen?

Adobe Premier Elements 10 for a MacBook Pro Mountain Lion OS 10.8.5
For my ski club, I'm making a short single 3 min video with footage from 3 different camera's. The video frames from one camera are 320 px by 280 px and the frames from the other two cameras are 640 px by 480 px and when shown full screen on a monitor, the footage from the two 640 px by 480 px cameras look OK (if not great) but the footage from the 320 px by 280 px is obviously grainy. I would like to embed the smaller into the larger at 50% so that the picture will be sharper, even though just filling up half the screen. Help please. This is for the upcoming ski show and I need it by Sunday, Oct 20. Thanks. DRThiess

DRthiess
With your Premiere Elements 10 Mac,
a. have you set your project preset for NTSC DV Standard
b. have you imported your 640 x 480 video into this NTSC DV Standard project via Get Media/Files and Folders and now have it on Video track 1.
c. have you then imported your 320 x 280 into this same project and placed it on Video track 2 above the Video track 1 content
d. have you then scaled the selected 320 x 280 on Video Track 2 using either
....Properties Palette/Motion Panel expanded and its Scale slider (check mark next to Constrain Proportions)
or
....Click on Monitor to bring up the bound box of the image and then clicking and dragging on one of the handles of the bounding box to scale the image
There are also some PiPs (Picture in Picture Effects) under Edit Header/Presets that you might want to explore. They are for 25% and 40%, but are adjustable.
Please let us know if any of the above worked for you or if you need supplemental information.
Thank you.
ATR

I have a 2011 mini that won't power up. The apple on screen comes onn then turns into a circle with a line in it. Any way to fix it?

I have a 2011 mini that won't power up. The apple on screen comes onn then turns into a circle with a line in it. Any way to fix it? It is running Mavericks on a 1T drive.

First thing, see if it will boot into the Recovery Partition: Hold down Command R at restart.
If it boots up there, then it's likely that the hard drive has failed, or simply doesn't have a working system.
If it doesn't boot up there, then it's likely to be some other part of the hardware.
If it is the hard drive, then this can be replaced. You can find videos showing you how to do this on sites like ifixit.com.
Then you can just restore all your data from your backup. You do have a backup, right?

Downloaded a movie from iTunes to my iPad. 2 minutes into the movie it stopped and My Videos is stuck in black screen mode. So basically rented a movie and never watched it.

Downloaded a movie from iTunes to my iPad. 2 minutes into the movie it stopped and My Videos is stuck in black screen mode. So basically rented a movie and never watched it.

The EXACT same thing happened to me last night! Rented a movie; it had barely started and then froze. When I touch the video app icon, all I get is a blank, dimly lit screen. None of the other videos I own will display either. Was your problem ever resolved?

Whenever I log into Facebook and someone has sent me a video I get a green screen and I can't see the video. Please help.

Whenever I log into Facebook and someone has sent me a video I get a green screen and I can't see the video. Please help.

You're welcome. And thank you for marking question as answered. To prevent it from happening again, go to Settings > General > Accessibility, turn off Zoom.
Stedman

The apple on the gray start-up screen turns into a circle with a slash.

My G5 has been pretty reliable for the past three (?) years. Lately it's been a bit squirrely booting up--once it went into kernel panic during boot, but powering down and restarting seemed to fix that. Lately, too, when I let the machine run and it goes to sleep I'll come back after a couple of hours to find the fan running at top speed and the machine unresponsive. Yesterday it seemed to have problems booting so I reset the PRAM and NVRAM and ran Onyx and it worked fine all day. This morning when I went to boot, I got the usual gray screen with the whirling gear. After about a minute, the apple in the center of the screen turned into a circle with a slash while the gear continued to whirl. How do I fix this?

I've subsequently tried a number of things. I reset the SMU, which didn't help until I also reset the PRAM. Computer booted normally. I rebooted from the Tiger DVD and repaired the start up disk; there were only two small errors to be fixed. The machine booted normally (and pretty quickly) for about a week before the problem resurfaced. I again went through the first two steps and got things working once more.
Lately the problem has returned. First, resetting the PRAM didn't help; only resetting the SMU worked. At the last event I needed to reset the PRAM without resetting the SMU. When I get home tonight I'll try booting from the DVD and repairing the permissions on the start up drive.
At first, I thought I'd leave it running all night, but when I got to the office in the morning the fans were running at full throttle and the machine was in a coma. All I could do was reboot--which it did, immediately going into kernel panic. I shut it down and rebooted, resetting the PRAM in the process. The computer booted and ran fine all day, although it seems slow (I did have Photoshop CS4 and Lightroom running simultaneously, but I do have 5 GB of RAM).
It's been suggested I may have a corrupt RAM chip (computer doesn't chirp at me, as I'm told it would) or, more terrifying, a processor is about to check out. I also have an ATTO SCSI card in this to run a legacy scanner. Could that be a problem?
Any advice?
JP

When i move a clip into the top project screen, it cuts off about an inch of video. im trying to make a chin face video so i need that inch. any help?

when i move a clip into the top project screen, it cuts off about an inch of video. im trying to make a chin face video so i need that inch. any help?

1) Make sure that your project is in the same aspect ratio as your camera. If your camera shoots 16:9. make a 16:9 project.
2) Check the clip inspector for the clip in your project to see if Image Stabilization is turned on. Stabilization works by zooming in, so you may want to turn it off.

Making all video the same screen size

Hi,
I am importing numerous screen size video into Premier Pro. How can I get them all the same size?

Make a sequence the same size as the majority of the clips and right click 'scale to frame size' for all the ones that don't match. You might have to change the scaling manually if they are of different shape.

How do i add a smaller video into the corner of a full-screened video?

i had a video all ready and running and what-not and i wanted to add another video into the corner of it to show a different angle. how can i do this with premiere cs6?

In the effects control pannel it doesn't show an option for 'motion/position' there are only:
- adjust
- blur & sharpen
- channel
- colour correction
- distort
- generate
- image control
- keying
- noise & grain
- perspective
- stylize
- time
- transform
- transition
- utility
- video
under video effects. really sorry if i'm being a pain in the backside but i have really only just started using premiere

RMBP, Chrome, Youtube: Video delays when in full screen

Hi all,
I have a retina Macbook Pro running Mac OS X 10.8.2, Chrome 25.0.1364.99. When I watch youtube videos there is normally no lag. Once I switch into full screen mode, there's a slight delay where instead of the video the screen will show a blank white screen before switching to the video.
This results in a slight 0.5-1s lag of the video behind the audio.
Opening the same video on Firefox and going to full screen doesn't result in this blank white screen and does not result in video lagging behind audio.
Any suggestions?
Thanks in advance.

Thank you,
it also worked for me
simonsglcfc wrote:
Had the exact same problem the past couple of days, was really frustrating as it was making videos play delayed in full screen and I tried searching for it everywhere but couldn't find any solutions.
Anyway, what I did has fixed it as a temporary workaround:
1. In Chrome, type chrome://plugins in the address bar
2. Click top right to expand +Details
3. Navigate to:
Adobe Flash Player (2 files) - Version: 11.6.602.171
Shockwave Flash 11.6 r602
Name:
Shockwave Flash
Description:
Shockwave Flash 11.6 r602
Version:
11.6.602.171
Location:
/Applications/Google Chrome.app/Contents/Versions/25.0.1364.99/Google Chrome Framework.framework/Internet Plug-Ins/PepperFlash/PepperFlashPlayer.plugin
Type:
PPAPI (out-of-process)
Disable
MIME types:
MIME type
Description
File extensions
application/x-shockwave-flash
Shockwave Flash
.swf
application/futuresplash
FutureSplash Player
.spl
Name:
Shockwave Flash
Description:
Shockwave Flash 11.6 r602
Version:
11.6.602.171
Location:
/Library/Internet Plug-Ins/Flash Player.plugin
Type:
NPAPI
Disable
MIME types:
MIME type
Description
File extensions
application/x-shockwave-flash
Shockwave Flash
.swf
application/futuresplash
FutureSplash Player
.spl
You need to disable the first of the two entries...which I have highlighted in Bold above.
Hope that helps.

I would like to know how to put my .mp4 music videos into the .....

Hello
I finally learned how to turn my music videos into a format that will play on my ipod and I am excited as **** about the whole thing. My one problem is I can't seem to put the music videos into the music video section. I would like to put my music videos in the music video section and I plan on making some of my favorite movies into .mp4 and keep them in the movies section. I would also like to know if I can have different folders for my movies? probably not eh? I guess they might just have to be in one big pile. That's ok I guess. So what's with the music video section? It would be nice to put them there. I guess while I am waiting for a response I am just going to convert the music videos and put them in the movies section..
Also I would like to share what program I am using to convert the files .. it's called
" WinAVI iPod/PSP/3GP/MP4 Video Converter "
And it works great! Someone on my Facebook account told me about it. I tried to ask people here what I should use but I don't think I got a straight answer ( either that or I am mildly ******** or something )
One more question. How to I put my pictures into separate folders on my ipod?
Aaron

Hi everyone !
please forget about the pictures question because I figured that out ok !!
I just need to know if it is possible to put my .mp4 music videos in the music video section of iTunes and my iPod. Like I said I want to just put full length movies in the movie section. And I would like to have my movies in maybe separate folders like I said. One for Anime, One for Animation ect ect ..
ALSO I am wondering can I make my Windows Media Player Classic the default for .mp4 files? I tried to do that but it was giving me some weird error message
when I try and make it the default for .mp4 I get this message
" Windows Media Player Classic does not have enough privileges to change file formats. Please click on " Modify " button To Get Administrator rights. "
Does this mean that only Apple programs should be used to view these files?
Aaron

How can I convert DVD- video into Apple's format so that it can be played and streamed from my Mac?

How can I convert DVD- video into Apple's format so that I can play the content on my Mac and also stream it to my Apple TV? A few years ago, I transferred all of my home videos onto DVD but now would really like to put these onto my Mac and stream them through Apple TV to watch on the "big screen". Any advice would be most welcome!! Thanks

MPEG Streamclip.
Apple do not have their "own" format. You need to convert your DVDs to H.264 though.

Embed an video into an image

Let start with the simple stuff.
Operating system is Windows XP
Photoshop version is CS4 V11
I have been racking my brains trying to figure out how to embed a video file into an image in Photoshop.
GOAL: i have a Jpeg of a TV screen frame. I want to take a YouTube video that i downloaded and place it into this TV screen frame.
After this i want to be able to save it in some way (i suppose save for web devices as a GIF) and then place that picture of a TV screen with a running video into a banner i am creating (like a website signature banner with a running video on the side of it).
All the tutorial videos i have found are from older versions of PS where bridge and ImageReady were all a part of the main program. CS4 is not like that so i cannot figure out how to even get the movies from bridge, or into Photoshop at all since they are two separate programs and i have not found a way to either open it with PS or move it to PS from Bridge.
I have it currently saved in both .mov and .avi file formats as i was not sure which would work (but the tutorial used .mov)
any help would be greatly appreciated.

It was simply an example.
1. I can capture the video myself with a capture card of me playing the game if that makes you feel better about it.
2. And when i said GIF i was refering to an animated GIF.
3. It is my website so i am pretty sure no one will mind if the file is larger than a normal website signature. We have plenty of bandwidth.

Problem inserting Flash video into DW CS3 template

I would like to insert some flash video into an editable
region inside a DW CS3 template. The template I am using seems to
work for literally hundreds of other pages I have made (none of
which, incidentally, have any media of any kind in them).
I have created the template and then an editable region and
now want to insert the flash video in that editable region. All
goes well until I hit the OK button. then I get this error--Making
this change would require changing code that is locked by a
template or translator The change will be discarded.
Can anyone suggest how I might over come this error??
Thx.
Jane

The problem is the detection option in the video insertion
dialog. If you
disable that option, you will not get the error.
This is a problem because the detection routine requires a
modification to
the <body> tag (insertion of an onload event) which you
cannot easily do in
a template child page.
If you really must have the detection, then you can copy and
past the load
call from a dummy (non-templated) page on which you have also
done the same
insertion. Post back with that page's body tag code, and I'll
show you
how....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Jane Smith 2300" <[email protected]> wrote
in message
news:fehcup$e6u$[email protected]..
> Further to my post before--The .htm that I am trying to
insert the Flash
> video
> (converted an AVI file using Flash video encoder) was
built from a .dwt.
>
> The template page has several editable regions in it.
There is also CSS.
> formatting the document. I am trying to insert the Flash
video into one
> of the
> editable regions.
>
> I have no problem installing the video in a page not
built with a template
> or
> without css..
>
> Thanks for any help you can provide.
>
> jane
>

Making my video into a Circle on screen

Similar Messages

Maybe you are looking for