Making new blank keyframes in the timeline

There´s a way to do this with actionscript? The question
is because i want to do this with 7000 items.
sayeg

hi kglad, thanks for your reply; well, i need to do this for
prepare the movie, and then publish a simple video. the reason to
do this is because i want to put another layer for a big label, and
turn on or off this label in some cases. Ok, i have a long way to
go with flash.
Thank you.
sayeg

Similar Messages

When I attempt to add a new key frame into the timeline it adds several frames to my animation

I am trying to edit an FLV file with flash professiona. Right now every frame is on long frame sequence, meaning that right now there is only one key fram in the entire 40 second animation. I am trying to add put key frames at various points in my animation but when I attempt to add a new key frame into the timeline it copies ever frame up to the selected and adds it to the front of my timeline. Any Idea how to fix this? I want to break my video up so I can add some shape tweens in between some of the frames

Extensions like IE View and IE Tab use IE and the IE rendering engine, so you are running IE.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I click on a link, get a new blank page, not the info expected. Use AVG Free Ed, Windows 7 professional.

I click on a link, and get a new blank page, not the info expected. I use AVG Free Edition, Windows 7 Professional. I have tried "open link in new tab" - no joy. Not all links are affected. It is not possible to say when a link is going to fail or work - it seems random.
== This happened ==
Every time Firefox opened
== It just started to happen about 2 weeks ago

I get the address as it should be as in attachment when I hover over the "FLIXTER" add on the right of screen. When I click it just comes out in a new window but BLANK. Open in IE then shows me the correct view. Puzzling. I have tried disapbling ans enabling java script in my options and sometimes this works then sometimes not??

I try to copy a selection into new blank canvas however the layer in the new canvas becomes gray/black/white, did i wrongly click on something ? Please help , Thank you in advance

Hi Gurus,
I have a beginner in photoshop , I tried to copy a selection into new blank canvas however the layer in the new canvas becomes gray/black/white, did i wrongly click on something ? Please help , Thank you in advance

How did you open the new document? What Image mode is the document in and what exactly did you copy to the clipboard? What was the current Photoshop target when you did the copy? Was it a straight copy or a copy merge etc...

When i select a pdf file for download in a webpage instead of automatically downloading the file and opening it using adobe acrobat I get a new blank window in the browser and it says done in the bottom left corner

when I select a pdf file within a webpage and click to download instead of getting the "download" window and the file automatically opening after download using adobe reader I get a blank webpage (in the same tab) and in the bottom left corner it says"done". No file is downloaded and if I click "back" I just return to the webpage containing the link.

Aha! The properties for the plugin file nppdf32.dll for Adobe Reader indicate the file is for Adobe Acrobat. This misidentification is then used by SeaMonkey as a label in the helper application list.
Adobe Reader 11.0.3.37: nppdf32.dll has version 11.0.3.37. This is the version in SeaMonkey's plugins folder.
Adobe Acrobat 7.0.8.218: nppdf32.dll has version 7.0.9.50.
As for having both Adobe Reader and Adobe Acrobat on the same PC, this generally works providing Reader is installed AFTER Acrobat. Reader is freeware, and I want to keep it current. Acrobat is purchaseware, and I cannot afford to keep buying upgrades or newer versions.

Aligning keyframes in the Timeline (After Effects)

I was trying to align some existing keyframes in several layers with each other. I was surprised that I could align objects in the composition but not in the timeline. So I did some searching. I found something that might help, but I don't think it's the complete answer. I think it would be great to get other's opinions / suggestions for a better way.
I followed this process:
Open the keyframed layers in the timeline
Selected all of the keyframes
Clicked the Graph Editor button
Set the Snap option (magnet button on the bottom of the Graph Editor)
Manually slide the desired keyframes to line up together
I've seen other suggestions for scripts or cutting and pasting keyframes. Though these should work, it sure would be great if I could select several keyframes and tell them to center-align, left-align or right-align.
Does anyone know of this ability in AE?
Thanks, Chris

I suppose this would be doable with a script, but off the bat I'm not aware of one that aligns keyframes in the manner you describe.
Mylenium

Is there a way to copy and paste the same changes in keyframes along the timeline?

Hi,
I was doing an effect (changing the parameters in keyframe editor) and I wanted to do the same effect in specific moments on the timeline. Is it possible to copy and paste the same effect on the keyframe editor?
Thanks

Following on from GFXZen, as well as repeating a series of keyframes as a regular pattern, if you need to move some of the repeats a little (to match moments in a soundtrack), use the Generate Keyframes command. That turns the extrapolated curves into editable and moveable keyframes.
There's more on information on keyframe extrapolation and generating keyframes at the bottom of this page from the Motion help system.
Check out the help information on the Transform Keyframes tool - you can use this to transform the keyframes of many parameters at the same time. Similar to using the option key when dragging keyframes in Adobe After Effects.

Making new text appear in the same space as old

I thought there must be a simple way of doing this, but I can't find how in Help, or in this Forum.
I want text on a slide to disappear and new text to appear, in exactly the same place.
Ah ha, I thought, this is just the thing for Smart Build - but this seems to be restricted to graphics, not text.
I hope this description is clear enough, and sorry if the problem and solution are well known, and I've just somehow missed it.

First, create the text you want to disappear. Then select it and assign it a Build-Out effect (I suggest a Dissolve of about 2 seconds, but the choice is yours). This can be triggered either by a Click or automatically at your option.
Next create the new text and place it directly on top of the first text. Assign it a Build-In effect (with the same type and duration as the Build-Out you have created).
In the "More Options" Builds List, assign the Build-In (new text) to occur Automatically With the Build-Out (old text).
Good luck.

Where did my keyframes go in the timeline?

I'm new to Edge Animate, so this is probably an easy solve.
I created an animation of my logo and then closed the file. When I reopened the file all of the keyframes along the timeline disappeared and were replaced by a long band of arrows pointing to the right. The animation still plays fine, but the keyframes are no longer available for editing.
I have created other test animations that do not have this problem.
What is causing this?

The first image is the file I'm having issues with. The second image is a Test file that reopens as expected. The problem file is a sprite animation where as the other one is not.
Test

How do i get the new blank tab page back into the tab bar

i took the new blank tab off the tab bar how do i put it back on?
and when i am on a page and click the number to go to the next page, it opens in a new tab. how do i make it open in same tab.?
one more, how do i make it so when i am on a page i can right click the mouse and make the link open in new tab?
thank you all for any help you can give me.

Do you mean the new tab (+) button?
Open the Customize window and set which toolbar items to display.
*"3-bar" Firefox menu button > Customize
*if missing items are in the Customize palette then drag them back from the Customize window on the toolbar
*if you do not see an item on a toolbar and in the Customize palette then click the "Restore Defaults" button to restore the default toolbar setup
*https://support.mozilla.org/kb/customize-firefox-controls-buttons-and-toolbars

Extending the timeline grid

Hi - I hope this is a very dumb question with a very simple solution, but I have looked and looked and I can't find an answer.
When I open a new Flash CS5 project, the timeline grid only goes out to 600 or so frames. I have a three minute audio track that I want to insert at frame 1, and at 24 fps, that means it should end around frame 7200. So what I want to do is to extend the grid out to 7200 frames - before I drag my audio clip in, or once I have it in.
If I set keyframes at 1 and 5, say, and drag my audio track in at frame 1, it appears that it will play all the way through using the controller, but my timeline grid is still only 600 frames long, and if the next thing I want to do is something that happens at frame 6000... I still can't get there.
I realize this may mean I have some total misconception about how the timeline / grid is supposed to work, and if that's the case, hopefully you can enlighten me... basically what I want to end up with is my 3 minute audio clip on the timeline, and the timeline grid extending out to the END of my audio clip so that I can start laying in images any time during the audio. Last time I did this, I created a dummy layer, put in a keyframe at 600, which caused the grid to extned to 1200... repeat a dozen or so times to get to my desired length, then set start and end keyframes on my Audio channel, import my audio, and delete the dummy later. Surely there has to be an easier way!
Thanks in advance... I really have been trying to find an answer to this for a while now, I must be using the wrong search terms...
Charles

Okay, so that's really the deal - you scroll to frame 600, insert a blank frame, scroll to 1200, insert, scroll to 1800, insert... I was hoping there was something more like Modify - Timeline - Extend Timeline - (fill in box with "7200") - [OK]. Or at least after I do insert my audio, "Modify - Timeline - Extend Timeline to End of Last Object" Seems like something people would want to do all the time, but, like I said, I guess I'm just thinking about building a flash file in a different way than flash developers think.
Once I'm at the highest existing frame on the grid (600 at the start), I can't get the grid to extend any more by pulling the mouse off to the right or tugging on the scroll bar... I assume that's how it's supposed to be. So I'll just continue keep doing my dummy layer thing, using that to extend the grid and then getting rid of it once I have my audio layer set up.
And, yes, for what I'm doing, I'll want to stream so that when I do place visual objects, they'll stay in sync with the narration. The tip on the different behavior if it's stream or sync is helpful.
Thanks for the quick response - was just hoping there was an easier way to do this, but I guess there isn't.
Charles

Have the Clips, Lost the Timeline

I've read through the forums a bit, and have not found a specific answer to my problem. I'm sure it's out there, but I'm stressed so I'm throwing it out.
I run an old G4 Cube, updated to OSX 10.4. The 20 Gigabyte hard drive is pretty much full, so I have an 80 GB and a 500 GB external drive. I got a video camera a year ago, and finally got around to trying to make a movie from my clips in iMovie. I spent 10 hours on a 60 minute video over the past couple days.
I imported the clips no problem. I arranged them in the order I wanted, no problem. I added titles no problem. I was pretty proud of my work. I saved it and quit. Then when I come back to open it, I get a message saying "There are 125 stray clips in the project folder. Would you like to put them on the Clips Pane?" If I say no, the project is empty. If I say yes, all my clips, including the titles I created show up in the clips pane, but the timeline is blank. I assume I'd have to go back and re-order all the clips in the time line.
In the project folder is a quicktime movie that is my project up to the last save. It plays with all the clips and titles in the correct order. The problem is that I wanted to add a couple more clips and a couple more titles, and this quicktime movie is not editable.
The project folder is saved on an external HD, because the internal has only 4 GB free.
Thanks in advance for any help that you can provide.

If I understand you correctly, the project is on an external drive, right? If not, please say. And I assume there's sufficient free disk space on that drive to edit the project. At least 10 GB free. Preferably more.
If so, then you shouldn't have to move the project. It should be okay where it is.
iMovie 4 would sometimes "forget" all the clips in the project. Essentially, all the editing is discarded, leaving all the clips in the iMovie Trash. It sounds like that may have happened to your project. (This would sometimes happen when we emptied the iMovie trash.)
The project may be rescuable, however, without having to re-order the clips in the Timeline.
It's possible to import that small QuickTime movie you mentioned to a NEW iMovie project. The movie is a special kind of movie called a reference movie, which plays the clips in the Media folder of the project. When you import the movie to a new project, everything in the Timeline of Project A will arrive in Project B as a single clip. That's not ideal, but it may be good enough. It should let you finish the project.
There's one hurdle. iMovie 4 can import no more than 9 minutes of video at a time, and your movie is 60 minutes long. So it's necessary to split the QuickTime movie into 9-minute chunks that you can import. Our friends at Oakstreet Software offer a free Applescript script that will split the movie. QuickTime Pro is required to run the script, $30 from Apple.
http://www.oakstreetsoftware.com/qtscript.php3
60 minutes is about 13GB, so you will need at least 25GB free on whichever drive you create the new project.
Until everything is complete do NOT save the project or make any other changes. Saving it will replace the QuickTime movie with a new empty movie. It will be empty because there's nothing in the Timeline.
It should be okay to make a duplicate of the QT movie and store the duplicate somewhere outside the project. Work with that.
Karl

Move motion tween and custom ease property keyframe at the same time???

Hello,
I'm making adjusments to my animation, by "ctl" clicking the motion tween diamond keyframe in the timeline, and moving it. It works great, except I have a custom ease property set up that has keyframes that correspond to the animation. When I move a keyframe, they all update and move except for the custom ease keyframes in the motion editor. Is there a way to do this?? Set it up so that the custom ease keyframes are locked with the other keyframes??
Any help would be greatly appreciated..
Thanks,

Hello,
Thank you for contacting National Instruments.
You should be able to control your RS-232 port and DAQ card independently. If you are doing a continuous buffered analog acquisition, then your board should be acquiring analog data continuously regardless of what commands are being sent out on the RS-232 port.
I imagine that this is a software timing issue. I would recommend that in your code that you configure and start your analog acquisition before you even start the stage's movement. After you have determined that you are acquiring data, you should send commands to stage to begin its movement. After all of the stages movements are complete, you will want to stop and clear your analog input measurement. This will ensure that you will acquire all
of the data for all of the movements of the stage.
Regards,
Bill B.
Applications Engineer
National Instruments

New Effect Keyframe Motion Help

I've added a new effect and am just trying to move something across the screen like I would in FCP.
The object starts at one point, I have clicked the 1st keyframe of the New Effect track, move the timeline to the last keyframe of the New Effect Track, and then drag the object where I want it on the screen.
This kind of works but the object goes backwards, meaning it starts where I want it to end and ends where I want it to finish.
How can I just get an object to go where I drag it and then stay there?

You need to tell us more specific information
What object are you using?
Which effects are you using?
How many total keyframes do you have?
Start from the beginning of your timeline and then hit Shift-K...click on the Effects tab in the Inspector and tell us what it says under the Active Parameters.
Hit shift-K again and tell us what it says under the active Parameters.
Do this for each keyframe then we can more specifically help you.

View a movie on the timeline

Hi everyone - I've placed a movie on the stage and have set
keyframes throughout the timeline so that the movie will resize
(effectively zoom in) in various places.
It's pretty difficult to do this without constantly switching
back and forth between the movie edit mode and the stage.
Is it possible to view frame 10 of the movie when the
playhead is on frame 10 and I'm looking at the stage?
Basically I'd like to be able to see frames of the movie
while I'm working on the stage.
Thanks

http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=15&catid=194&threadid =1232711&enterthread=y
There ya go

Making new blank keyframes in the timeline

Similar Messages

Maybe you are looking for