Making new oracle 10g cluster in redhat enterprise linux

Hy All
i have installed redhat enterprise server in 2 systems and both are attached with SANE network storage. i want to configure oracle 10 g clustering with this setup.
should i have to configure clustering in linux only or there is a feature of clustering in oracle?
if yes than how to do that? i dont have any idea about oracle
please somebody help me
with regards,
ali

Hi Ali!
Hardware clustering is differnet from Oracle clustering.
If you have the database you should investigate RAC http://www.oracle.com/pls/db102/to_toc?pathname=rac.102%2Fb14197%2Ftoc.htm&remark=portal+%28Administration%29
For the Application Server have a look at http://download-uk.oracle.com/docs/cd/B14099_18/core.1012/b14003/toc.htm
Hardware clustering with RedHat could be achieved with Piranha.
cu
Andreas

Similar Messages

Forms 10g certification on Redhat Enterprise Linux 5 ??

Is Forms 10g certified on Redhat Enterprise Linux 5 ??

I don't think. of sure RHEL 5 is not certified for DB 10gR2 and even for OAS 10g.
Even if I have made an installation of DB 10gr2 for RHEL 5 with xen and it's work, meanwhile OAS 10 didn't work!
Anyway,Try to search for certification matrix on Oracle site

Steps to install Oracle 10g on Red Hat Enterprise Linux 4 AS

Hi Friends,
I want to install oracle 10g on Red Hat Enterprise Lnux 4 AS. Can anyone give me steps how to install oracle 10g on it? My machine configuration Processor 2.66ghz Intel, Memory 1024 MB , HDD 160 GB, 845 mother board.

In addition to the excellent suggestion by Paul, you may want to look at the internet resources such as
http://www.puschitz.com
http://ivan.kartik.sk
http://www.dizwell.com
each of which as Oracle install on Linux cookbooks.

Need Oracle 9i client for RedHat Enterprise Linux AS 4.0 machine

I need to install Oracle 9i client on my RHEL AS 4.0 machine (running Intel xeon 64 bits processor). Could some one please point me to correct installable for this.
I tried to use both the Oracle9i Release 2 (9.2.0.4) installables at http://www.oracle.com/technology/software/products/oracle9i/index.html
But both of them are giving error. For Linux x86-64 installable, the Universal Installer is not able to launch because the installer seems to be for AMD processor. And for second installable (32 bit installable), I get a JRE related error saying that a java library file (some *.so file) could not be located.
Please guide me on the same...
Thanks a lot,
Anuj Tiwari

According this info you should install x86_64 version.
In your first post you mentioned some errors during installtion. Can you post exact error message?

Problem when install oracle 10g client on whitebox enterprise Linux 3

I download oracle-client-10103.tar.bz2 and unzip.
After set environment variable follow instruction
I run runmefirst.sh, system cannot recognize the .o file.

It is possible that you did not download the correct client.
The file name for the 10.1.0.3 client for Linux x86 is ship.client.lnx32.cpio.gz. The Linux x86_64 client name is ship.client.lnxx86-64.cpio.gz .

Private interconnect of an Oracle 10g cluster

Can you please answer below questions?
Is a direct connection between two nodes supported on the private interconnect of an Oracle 10g cluster?
We know that crossover cables are not supported, but what about a Gigabit network with a straight cable?”

Hi,
I really wouldn't suggest that approach, It is definitely not efficient and not flexible
- If you have 4 nodes, and nodes 1 want to send message to node 4, the package must go through node 2 and 3? Is it efficient? NO absolutely
- If you have e.g 2 nodes, if one of the link down in one of the nodes, the other nodes link will also down, this will most likely evicting both nodes instead of one node
- your clusterware nodes iis limited by the cable which is not efficient
- etc etc etc more disadvantages than advantages
Cheers
FZheng

Problem while intalling oracle 11i(11.5.9) on Redhat Enterprise Linux 3

Dear all,
we are installing oracle 11i ( 11.5.9) one Redhat Enterprise Linux 3
it gives the following error massage .
Error code received when running external process.check the log file for details._
Running Database Install Driver for PROP instance._
Please any suggestion.
Thanks

Hi,
This is a generic error, so please check the installation log files for more details about the error.
Regards,
Hussein

How to install Oracle 10g on to Red Hat Linux 5 Server

I'm new to both Linux and Oracle. I've been working on an installion of Oracle 10g on a Red Hat Linux 5 Server for about 2 weeks. I've been doing a lot of reading about installing Oracle on a Linux environment. I finally got to the installation portion and the Oracle Installer displayed a message that I had to have Red Hat 4 or 4 Enterprise to continue.
How can Install Oracle 10g onto a Red Hat 5 Linux Server"? Is there an option that I can use to bypass the OS checking?
Thanks

Unfortunately there is no way to access metalink without a valid account. You could then just try to skip preinstall requisites with this clause:
./runInstaller -ignoreSysPrereqs
or this method:
Copy the oraparam.ini from the installation source install/oraparam.ini to /tmp directory.
Edit the file /tmp/oraparam.ini so this file reads:
After
[Certified Versions]
Linux=redhat-3,SuSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2,redhat-5
also, make sure you have these packages installed:
# rpm -ivh gcc-c++-4.1.1-52.el5.i386.rpm gcc-4.1.1-52.el5.i386.rpm
libstdc++-devel-4.1.1-52.el5.i386.rpm glibc-devel-2.5-12.i386.rpm
glibc-headers-2.5-12.i386.rpm libgomp-4.1.1-52.el5.i386.rpm
libXp-1.0.0-8.i386.rpm compat-libstdc++-296-2.96-138.i386.rpm
compat-libstdc++-33-3.2.3-61.i386.rpm
~ Madrid.

Exception signal: 11 (SIGSEGV) on RedHat Enterprise Linux

Oracle 10g XE running on RedHat Enterprise Linux.
Certain operations (in this case a delete) cause Oracle instance to die with Exception signal: 11 (SIGSEGV).
Anyone have any ideas? How do I troubleshoot this, or is it obvious from the trace file entry below that there's a configuration problem?
THANKS FOR ANY HELP!
Relevant section from trace file:
PARSING IN CURSOR #5 len=66 dep=0 uid=36 oct=7 lid=36 tim=1217282870362781 hv=13
17951628 ad='4727614c'
delete from HA_ADDL_COMMISSION where (PRODUCT=:b0 and AGENT=:b1)
END OF STMT
PARSE #5:c=1000,e=49,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,tim=1217282870362779
EXEC #5:c=0,e=240,p=0,cr=1,cu=8,mis=0,r=2,dep=0,og=1,tim=1217282870363056
Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0x
1080, PC: [0xa2c6b92, kpoal8()+4230]
Registers:
%eax: 0xffe5b890 %ebx: 0x00000000 %ecx: 0xf7b604a4
%edx: 0x00000000 %edi: 0x00000000 %esi: 0x00000000
%esp: 0xffe59724 %ebp: 0xffe599b4 %eip: 0x0a2c6b92
%efl: 0x00210246
kpoal8()+4217 (0xa2c6b85) je 0xa2c6b8c
kpoal8()+4219 (0xa2c6b87) mov 0xc(%edx),%edx
kpoal8()+4222 (0xa2c6b8a) jmp 0xa2c6b98
kpoal8()+4224 (0xa2c6b8c) mov 0x15c(%ecx),%edx
kpoal8()+4230 (0xa2c6b92) mov 0x1080(%edx),%edxkpoal8()+4236 (0xa2c6b98) mov 0x18(%eax),%ecx
kpoal8()+4239 (0xa2c6b9b) mov %edx,0x14(%ecx)
kpoal8()+4242 (0xa2c6b9e) jmp 0xa2c6690
kpoal8()+4247 (0xa2c6ba3) movzb 0xc2b9a63,%edx
*** 2009-07-01 18:20:59.254
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [kpoal8()+4230] [SIGSEGV] [Address n
ot mapped to object] [0x1080] [] []
Current SQL statement for this session:
delete from HA_ADDL_COMMISSION where (PRODUCT=:b0 and AGENT=:b1)
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
ksedst()+27 call ksedst1() 1 ? 1 ?
ksedmp()+557 call ksedst() 1 ? 3038 ? F7000000 ?
F7CECF88 ? FFFFFFFF ?
F7CECF80 ?
ssexhd()+863 call ksedmp() 3 ? A2C6B92 ? 616F706B ?
2928386C ? 3332342B ? 30 ?
kpoal8()+4230 signal 00000000 B ? F7CEEC8C ? F7CEED0C ?
opiodr()+835 call 00000000 5E ? 17 ? FFE5B890 ?
ttcpip()+1839 call 00000000 5E ? 17 ? FFE5B890 ? 5 ?
opitsk()+1027 call ttcpip() C6E6D80 ? 5E ? FFE5B890 ? 0 ?
FFE5AD6C ? FFE5B9A0 ?
opiino()+821 call opitsk() 0 ? 0 ?
opiodr()+835 call 00000000 3C ? 4 ? FFE5C460 ?
opidrv()+466 call opiodr() 3C ? 4 ? FFE5C460 ? 0 ?
sou2o()+91 call opidrv() 3C ? 4 ? FFE5C460 ?
08288137 call sou2o() FFE5C444 ? 3C ? 4 ?
FFE5C460 ?
main()+111 call 082880C2 2 ? FFE5C490 ?
__libc_start_main() call 00000000 2 ? FFE5C554 ? FFE5C560 ?
+220 638810 ? 0 ? 1 ?

Sanjay --
I don't know what "set all ORACLE variables" means. Is there a manual page somewhere that explains this? I mean, there are a LOT of variables.
This XE installation works 99.99% of the time, involving hundreds of tables and a large variety of queries, functions, packages, triggers etc. Only this one transaction causes the error, so I'm not sure what additional ORACLE variables would need to be set or modified.
Also, what's the procedure for submitting an SR to Oracle? Do you have a link? I looked at the Oracle site and it seems to require the user to have a commercial support level before anything can be submitted.
Thanks.

Patches for Installing Oracle 9i on Red Hat Enterprise LINUX 3.0 AS

I recently purchased An Oracle Database Enterprise Edition � Trial License.
I am attempting to install Oracle 9i on Red Hat Enterprise Linux Advanced Server 3 (RHEL AS 3).
After several unsuccessful attempts and consultation with the FAQs available on the Oracle site I have discovered
that it can not be installed without the following patches.
P3095277_9204_LINUX.zip
P3238244_9204_LINUX.zip
P2617419_210_GENERIC.zip
P3006854_9204_LINUX.zip
P3119415_9204_LINUX.zip
Can anyone tell me how I can aquire these patches?
This is for an eval of the product on the platform mentioned above. If I can not complete a successful install,
there is no way for my company to evaluate the product
and eventually purchase it.
You can contact me at this email address [email protected]

Daer suneetkapoor:
I am looking for P3006854_9204_LINUX.zip in order that can be properly able to install oracle9i on Linux AS 3. And I saw you to reply the message on forum that you can share the patch. Would you mind if you can send an email with the patch for me immediately, I will greatly appreciate it.
thanks you
regards
ellery
PS: My email address is [email protected]

Crystal Reports Server 2008 V1, RedHat Enterprise Linux, MySQL, ODBC

Iu2019m confused about connecting to an ODBC source from a report within CMC. Iu2019m a Unix guy; I donu2019t know much about Crystal reports, but Iu2019m working with a Crystal guy to get this thing working.
 
First, background: I have installed Crystal Reports Server 2008 V1 in RedHat Enterprise Linux (5.4), and itu2019s running just fine! Iu2019m using the included Tomcat application server, but Iu2019m storing CMS and Audit data our local running copy of MySQL (5.1.42). The RHEL install is native 32-bit (the only way I could get it to work), Crystal is storing and retrieving data from MySQL, The Central Management Console is responding to port 8080 over Tomcat, Iu2019m able to log in and see stuff, and so far, life is good.
 
Now, where Iu2019m stuck: the data weu2019re trying to build reports from also resides in this local Linux / MySQL install, and connecting to it from a report within CMC is where Iu2019m lost.
 
First, I successfully installed the unixODBC and MyODBC drivers in Linux. Iu2019m able to connect to MySQL successfully using the isql utility. Here are my conf files:
 
<pre class="jive-pre"><code class="jive-code jive-java">/etc/odbc.ini
[DSN_NAME]
Driver = MySQL ODBC 5.1 Driver
DATABASE = project_web_prod
DESCRIPTION = Project Description
UID = username
PWD = password
SOCKET = /var/lib/mysql/mysql.sock
/etc/odbcinst.ini
[MySQL ODBC 5.1 Driver]
Driver = /usr/lib/libmyodbc5.so
UsageCount = 1
</code></pre>
 
Again, this all works with isql (Iu2019ve even used both a socket connection, and port 3306, in odbc.ini).
 
Now, our Crystal guy uploads a report into the CMC. I go to Folders -> <Project Folder>, right-click the report I want to test, click Database Configuration, and check the option Use custom database login information specified here. I select database driver ODBC from the dropdown, and type in the server, database, username, and password info. However, when I try to run the report, it fails to connect.
 
So, stupid question, can Crystalu2019s CMC use the system ODBC configuration options? (The ones stored in /etc). Because I saw an odbc.ini file in ~crystalinstalldir/bobje/. I edited it to match the contents of my /etc/odbc[inst].ini files, but to no avail. I saw that Crystal has itu2019s own ODBC engine, but it doesnu2019t support MyODBC driver, does it? I even tried hacking env.sh to use the system unixODBC library instead of the included one, but no luck.
 
So, in short, my question: how do I simply get reports in CMC to connect to a MySQL data source (using ODBC)?
 
Thanks so much! An answer to this question will save my day!
 

Thank you, Efstratios, for the helpful reply!
So, I followed the directions in the PDF file you attached, and everything went smoothly. However, Iu2019m still not able to connect to ODBC within CMC.
Hereu2019s what I did:
<ul style="list-style-type:disc">
<li>Copied the unixODBC libraries over to <installdir>/bobje/enterprise120/linux_x86/odbc/lib</li>
<li>Removed MySQL ODBC connector 5.1, installed MySQL ODBC connector 3.51.</li>
<li>Edited <installdir>/bobje/defaultodbc.ini, added my DSN and MySQL library info as per the instructions (I have both an odbc.ini, and defaultodbc.ini, identical files, just to be safe)</li>
<li>Tested the connection using these libraries, this odbc.ini, and isql. Worked just fine</li>
</ul>
So, my problem seems to be in getting the CMC to actually use my ODBC setup!
Any other hints / things I could try?
When I right-click a report, and go to “Database Configuration,” which connection options should I use for the report? Iu2019ve tried both “Use original database logon information from the report,” and “Use custom database logon information specified here” (using the ODBC option from the drop-down menu). Either way, if I enter in the database, username, password, and then try to run the report (“Run Now”), I get this message in the History: “Failed - Information is needed before this report can be processed.”
Is there another place I could get a more helpful error message? Or is there, perhaps, another way I could test database connectivity from within CMC? I wish there were at least a “Test Database Connection” optionu2026 :P
Thanks so much for your help!

Unable to install j2sdk-1.4.2 in Redhat Enterprise Linux advanced server v3

When trying to extract j2sdk-1_4_2 on RedHat Enterprise Linux advanced server, I got the message
Do you agree to the above license terms? [yes or no]
tail: bash: No such file or directory
Unpacking...
Checksumming...
1
The download file appears to be corrupted. Please refer
to the Troubleshooting section of the Installation
Instructions on the download page for more information.
Please do not attempt to install this archive file.
The RHEL is with kernel 2.4.21-37. I got the same error message on extracting both binary code and the rpmfile.
Is it because of the command "tail +511 $0 > $outname" ? And any experienses on how to fix it?
Thanks in advance.

checksum have to be exactyly right. Downloading by IE causes often errors - use firefox in downloading and calculate checksum.

Running ocs10g services on Redhat Enterprise linux v4.0

Hello,
How can i run Collaboration Suite Services from linux Redhat Enterprise Linux v4.0?
Thanks
Khaled Fahmy

Can you be more specific?
Do you have a working installation? Is the manual not explaining situations that you are in?
OCS does run on RH 4.
cu
Andreas

Cant install oracle 10g release 2 on unbreakable linux

i have being trying to install oracle 10g re 2 on unbreakable linux.after installation i open the url for bot em/isqlplus and it works.but after restarting the system i type the command
emctl start dbconsole
it says command not found
pls help me any 1.

There is so much you aren't telling us. For example, if you created a user "oracle" to be the Oracle software owner and install the Oracle software with, there will be a directory named /home/oracle. Inside this directory will be a file called .bash_profile. You can put lines like export ORACLE_HOME=, export ORACLE_BASE= and export ORACLE_SID= so that your environment is set up when you login. Jeff Hunter has a lot of information like this on his website. Check it out.
Tom

Flash media interactive server with redhat enterprise linux ?

Was wondering if anyone was having issues trying to install
the flash media interactive server on a RedHat Enterprise Linux
machine. It seems that the installer that is packaged with the
program in incompatiable. If so what are you doing to get the
server installed? Thanks for any help

i check the dependencies and noticed that there was one that
was not satisfyied " libasneu.so.1 as it was link to nothing. After
moving the file to the /usr/lib and running the ldd command on the
fmsmaster file i was then able to see the link between the two.
When I try to install the program again I recieve the same error
message
"no package installFMS available"- this happens when i try
using yum to install the program or
ERROR: your distribution, unknown, is not supported by this
Adobe Flash Media Server installer. - happens when ./installFMS is
ran.
anyone else know of any other tricks to get this installed ?
Thanks again for everyone help on this issue.

Making new oracle 10g cluster in redhat enterprise linux

Similar Messages

Maybe you are looking for