Making packages for i686 and x86_64

I have a number of packages which I use which are either not mainstream, or if they are, I compile a bit differently.
I distribute them amoung machines which are both i686 and x86_64 so the question is can I make them for both types of CPU at the same time or indeed on the same machine?
If not why not? And, can we change makepkg so that it can?

I believe it is, but it is a lot more difficult. On your i686 host system, you would need an x86_64 kernel (and toolchain?). I have never actually tried....

Similar Messages

Install on USB - for i686 and x86_64 Questions

I'm installing on a USB flash drive for portable use everywhere without lugging a laptop or even a netbook around.
The wiki at https://wiki.archlinux.org/index.php/In … B_key#Tips says: "For the most versatile compatibility it is recommended that you install the x86_64 architecture with multilib support because it will run on both 32 and 64 bit architectures. "
Through Multiple installs, I can get 32 bit or 64 bit installation -- but not both. Installing with 64 bit and multilib enabled (yes, all of the [mutlilib] section in /etc/pacman.conf is uncommented) enables the repository, but only for the odd package that requires 32 bit code; there's no 'parallel' 32 bit install or abilitiy to "run on both 32 and 64 bit architectures." Sixty-four bit with 32 bit multilib enabled can't be booted on a 32 bit machine.
A plain reading of the 'Tips' section mentioned above suggests one can run a portable USB-based system on both 32 and 64 bit hardware. I am, sadly, unable to find any suggestions how to get this to work.
Where might I look for a solution?
Thanks!

I found the edit that put this info in the wiki: https://wiki.archlinux.org/index.php?ti … did=254699
64-bit w/ multilib will run both 32-bit and 64-bit applications, but it will run only on 64-bit hardware.
Maybe that's what the author meant. As it stands now, this statement is wrong.
fionn wrote:As a secondary followup question: what kind of voodoo do they do on the dual-architecture install images?
I doubt there is any magic involved. The iso has both the 32-bit and 64-bit applications.
https://projects.archlinux.org/archiso.git/
Last edited by karol (2013-10-28 14:45:14)

Package for InCopy and Email

I am having trouble with "Package for InCopy and Email" in CS6 on a Mac 10.6.8. My default email is Outlook 2011. I get a blank message window when I try use this option. I end up manually creating the assignment and emailing it. But I would prefer for the email window to open with the package automatically attached. It started happening when I upgraded to CS5.5 and also upgraded from Entourage to Outlook email app. Any thoughts to resolve this issue?

Adobe didn’t say anything, I did. And I didn’t say it was Microsoft, I said it sounded like an issue with the email program.
Where does that leave you? Looking for the cause.
Does any other program cause this? Do you have Acrobat installed? Try to attach a PDF to an email and see if it works.
Bob

Which are the latest business packages for ESS and Mss?

Hi all,
Which are the latest business packages for ESS and Mss?
Regards
Rajendra

Hi rajendra
It's all about R3 version, which R3 version u used?
the following BP are available for ESS/MSS on service.sap.com u need sid-password to download it.
R3 4.6C/4.7 Enterprise
ESS: - Business Package for Employee Self-Service 4.6C - 4.7 50.4
https://websmp102.sap-ag.de/~swdc/011000358700005104712004D/BPESS46C504_0-20000613.ZIP?_ACTION=DL_DIRECT
MSS: - Business Package for MSS 60.1
https://smpdl.sap-ag.de/~swdc/012002523100003529452006D/BPMSS601_19-20001489.zip?_ACTION=DL_DIRECT
ERP2004: - (R3 ECC 5.0)
ESS:- BP for Employee Self-Service (mySAP ERP 2004) 60.2
https://smpdl.sap-ag.de/~swdc/002007974700000167412004D/BPERP4ESS0_0-10003146.zip?_ACTION=DL_DIRECT
MSS:- BP for Manager Self-Service (mySAP ERP 2004) 60.1.1
https://smpdl.sap-ag.de/~swdc/002007974700000246072005D/BP_ERP4MSS0_2-10002991.zip?_ACTION=DL_DIRECT
ERP2005 : - (R3 ECC 6.0)
ESS: - BP ERP05 ESS 1.0 Support Package 03 ( Up to SP5 available)
https://smpdl.sap-ag.de/~swdc/012002523100000076042006D/BPERP5ESS03_0-10003288.sca?_ACTION=DL_DIRECT
MSS: - BP ERP05 MSS 1.0 Support Package 03 ( Up to SP5 available)
https://smpdl.sap-ag.de/~swdc/012002523100000076062006D/BPERP5MSS03_0-10003289.sca?_ACTION=DL_DIRECT

Business package for PM and SD

hi,
I am looking for Business package for PM and SD . we are on Netweaver 7.0(2004s), Portal 7.0 and ECC.
I tried to depoloy "Business Package for Sales " Release 60.1 but its not showing up in my PCD.
please share some knowledge.
Regards
stan

If u have correctly deployed Business package using JSPM means it wil show defeintely show in PCD
goto content admin -- portal content -- content provided by sap -- specalist -- here u can see ur BP
and also see SAP Note:731386
Regards
Krishna.

Cloud package for Photoshop and Lightroom

If I purchase the cloud package for Photoshop and Lightroom . Will I be able to continue using my previous version of Lightroom on the same computer? I would like to have access to both the my previous one and new cloud Lightroom on one computer. What happen to my Lightroom installed on my computer?

HI LIsa,
Yes you will be able to use the previous version on your computer. You can run both versions on the same machine. The previous version should not be affected
Thanks
Scott

How to download a business package for ESS and MSS?

hi folks,
could anyone tell me how to download a business package for ESS and MSS ? any reference material on the same would be appreciated..
thanks
aditi

Hi aditi
You can get it from service market place.Follow the below specified path.
https://websmp203.sap-ag.de/swdc -> SAP Installations and Upgrades -> SAP Application Components -> SAP ERP ->
SAP ERP 2004 -> SAP Business Packages -> Portal Content ->
Entry by Component -> Portal Content ->
BP ESS (ERP 2004) 60.2 -> #OS independent ->
BPERP4ESS0_0-10003146.zip.
Unzip that zip file to get the BPERP4ESS01_0-10003146.sca file. Deploy this file via SDM.
You can get refernce material in
https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio
Also check these links below:
https://websmp203.sap-ag.de/ess.
http://kwhelp.sap.com/SAPIKS/Sc03c90b8d952479cb6d30c4ce66c8b8e/KW/IWB_STRUCT21D0EB3B19C10401E10000000A114084/IWB_EXTHLP1CD0EB3B19C10401E10000000A114084/?LANGUAGE=EN&RELEASE=50_2003_Q4&IWB_INDUSTRY=EP_CONTENT&IWB_COUNTRY=&TMP_IWB_TASK=DISPLAY
http://kwhelp.sap.com/SAPIKS/Scd39acba0a12454691a37c1e41deaeeb/KW/IWB_STRUCT9B33383FDB800804E10000000A114084/IWB_EXTHLPE033383FDB800804E10000000A114084/?LANGUAGE=EN&RELEASE=642&IWB_INDUSTRY=&IWB_COUNTRY=&TMP_IWB_TASK=DISPLAY
Hope this helps.
Regards
Yoga

Arch i686 and x86_64

Hi!
I've noticed that there is a x86_64 project for arch at www.arch64.org
Why is that project separated from the normal i686?
The ftp hierarchy supports multiple architecture types:
ftp://ftp.archlinux.org/0.8/os/i686
There could be a i586 and a x86_64 as well. I think it has been introduced for that reason a couple of years ago, so why not use it.
Selection of architecture could be at /etc/rc.conf or /etc/pacman.conf
I know that i586 and x86_64 aren't as stable as i686 is. But I think theses projects could get more testers, because it's easier to install them, find packages, more mirrors are available and so on.
Regards,
Moritz
PS: I hope this discussion didn't happen before and I did not found it, but maybe this is the time to discuss it again! :-)

Talk to syamajala or c14n. They can be found in IRC. c14n is busy as hell, but he maintains the system, syamajala is the guy that basically started and heads the project. If you can boot the sucker using directions from the wiki, you'll then be able to build and compile packages in much the same way as i686 users.
http://wiki.archlinux.org/index.php/Cur … velopement
http://wiki.archlinux.org/index.php/Arch64_Install_page
http://wiki.archlinux.org/index.php/Arch64_FAQ
Those pages may or may not be up to date. ;-)
HTH,
Dusty

Dbms_crypto package for number and date data type

Hi,
I am using Oracle 10g 10.2.0.3 on Linux 64 bit
I am tryiing to use dbms_crypto package for the first time to encypt my tables column
Following are my table columns
NAME1 VARCHAR2(2000),
ID1 NUMBER,
SCORE number
This table is already populated
i want to encrypt Name1 and Score column. Following are the functions i have created for Encryption and decryption.
--For Encryption
create or replace function get_enc_val
p_in in varchar2,
p_key in raw
return raw is
l_enc_val raw (2000);
l_mod number := dbms_crypto.ENCRYPT_AES128
+ dbms_crypto.CHAIN_CBC
+ dbms_crypto.PAD_PKCS5;
begin
l_enc_val := dbms_crypto.encrypt
UTL_I18N.STRING_TO_RAW
(p_in, 'AL32UTF8'),
l_mod,
p_key
return l_enc_val;
end;
--For Decryption
create or replace function get_dec_val
p_in in raw,
p_key in raw
return varchar2
is
l_ret varchar2 (2000);
l_dec_val raw (2000);
l_mod number := dbms_crypto.ENCRYPT_AES128
+ dbms_crypto.CHAIN_CBC
+ dbms_crypto.PAD_PKCS5;
begin
l_dec_val := dbms_crypto.decrypt
p_in,
l_mod,
p_key
l_ret:= UTL_I18N.RAW_TO_CHAR
(l_dec_val, 'AL32UTF8');
return l_ret;
end;
Key: I have stored a key in other schema and calling it by using function get_key().
Following is my insert
INSERT INTO Score_table VALUES
(get_enc_val('John',get_key()),25,get_enc_val(79,get_key()))
it is giving me following error
ORA-00932:Inconsistent Datatypes:Expected number got binary.
I checked, it is an error due to Score field, which is of number type. So do i need to change type of Score field to varchar or is there any other way to encrypt number and date field.
If i need to change the type then what will happen to the data already in Table and how do i encrypt data already in table.

Hi,
Is there any one who can tell me that, do i need to change my table column data type as the encrypted value will be character.

Reports available in the Business Package for MSS and ESS

Hi,
I have searched sdn.sap.com throughout looking for a comprehensive list of reports available in the business packages for both MSS and ESS, i got a little bit of joy and found some of the MSS reports but not all on sdn.sap.com, can anyone please advise where i would find such information on both these packages, just to re-iterate, i am looking for a list of reports these business packages offer? any help much appreciated.
Thanks
John
P.s any documents can be sent to [email protected]

@John
(1) ESS- We built our own custom PORTAL role/workset in which one of the worksets we created is called "Tools and Forms". Under that workset, we placed various pages/iViews that either are simple URL iViews that link to external documents and such (like vacation request forms since they do not do online leave requests yet) as well as a couple ot t-code iViews that run reports in ECC for the employee. Nothing very mind blowing there. Just some content creation on the portal side.....oh, and some config on the backend to create a Homepage Framework Area Page and all for it (I liked that part!)
(2) Wow....talk about perfect timing...I just had to document the way MSS sees the MDT reports in it's "reporting" area yesterday! haha Here goes the quick explaination....in configuration for MDT, you have various "scenarios". These kinda determine which "groups" of reports will show in MDT. For MSS for the Reporting webdynpro/service, the scenario is RPT0 (in ECC 5.0, at least). Soooo if you look at the function CODES assigned to RPT0, you will see several for Training and one for Accounting (Cost Centers)...you can reference the function CODES listed back to the "pool"/library of function codes a bit up/previous in the same config area for MDT(I think it is called "Define Function Codes"). However, there is one more piece you will see listed under RPT0....it is a DIRECT call to function MODULE "HR_HIS_READ" (this was a bugger to find because I could not find the "Maternity" report listed in the function codes and had to figure out where the heck it was coming from! haha). Anyways....what the function MODULE actually does is call the HR Information System (HIS) passing it the RPT0/MSS scenario. This returns the particular reports for Employee Data and Time&Attendance. You can see this if you run the HR_HIS_READ function directly and enter RPT0 for the second input value (first and third are not needed or you can just enter "*". Sooooo that is how the "magic" happens. Hope that explained it. From there, you can simply config you own scenario/reports to add into MSS if you like.
Hope this helped!

Package for china and the u.s

can I GET A PLAN FOR CHINA AND THE U.S

Not really sure what you are asking but if it's how much it would be to send an iPhone from the US to Bogota I'm afraid Apple do not send iPhones outside of the US or indeed outside of any originating country where Apple have a presence. Any warranty supplied with that iPhone would be automatically invalid and any service or repair would have to take place where the phone was purchased.

IViews/Business Packages for News and/or Unit Converter

Hallo,
are there any iViews or Business Packages available for the following tasks?
1. News iView with the possibility to refer to documents, have user (role) specific buttons (Create New, Edit, delete...) and Subscription Services using the cm-functionality
2. An Unit Converter, to convert some specific items like length, weights...?
Please let me know.
Sebastian Traeder

Hi Sebastian,
for the first request, easyWCM seems to be quite close. It's a business package which closes some gaps in the standard, for example that there is no connection between the PCD and the KM structure; that there is no internationlization feature in KM; that there is no dynamic switch so that users with the corresponding permissions are confronted with extra possibilities (like create/edit...) whereas endusers only see the content - and all this by using just one PCD structure.
See http://www.easyWCM.com
For the second request, I don't expect that there is a special portal solution / business package. But for sure you will find java libs / example implementations on the internet, which easily could be build into some iView implementation.
Hope it helps
Detlev

1 App-v package for server and clients?

Hi,
Please verify if this setup is correct.
The idea is to deploy an App-v 5.0 package to servers as well as pc's.
Deploy of an app-v package with 2 deployment types:
1.for a Windows 2008 R2 without any dependency = prereq Windows 2008 R2 (no dependency to App-v 5 since it is installed in build of server)
2.for a Windows 7 X64 with dependency App-v 5.0 hotfix 5 (which has a dependency to App-v 5)
... and 2 deployments:
1.to a terminal server farm (which has App-v 5.0 RDS deployed already), mandatory
2.to Windows 7 pc's (not to users for now), also mandatory
This to avoid having two sepeare App-v applications for the same source.
Please advise or correct.
J
Jan Hoedt

Looks fine, I have stopped using the App-v client as a dependency, I set it as a requirement instead as it makes it easier to manage the App-v client as there are no dependecies to take care of.
Regards,
jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Native package for Mac and relative path

Hi,
I done a small application with Javafx that start an Embedded Jetty. All works fine in Windows also with native package. Instead in Mac it works only before native packaging. Seems that the problem is how relative path are considered.
The tree of the content is this:
myfile.jar
webapp (folder)
libs (folder)
Look at this code:
                String webAppDir = "webapp";
                File f = new File(webAppDir);
                log.debug("Path webapp folder: " + f.getAbsolutePath());
                if (!f.exists())
                    throw new Exception("The folder " + f.getAbsolutePath() + " doesn't exist");
                if (!f.canRead())
            WebAppContext context = new WebAppContext();
            context.setContextPath("/myapp");
            context.setResourceBase("webapp");
            context.setDescriptor("WEB-INF" + File.separator + "web.xml");
            context.setSessionHandler(new SessionHandler(sessionManager));
                    throw new Exception("La cartella " + f.getAbsolutePath() + " non è leggibile");
The problem is that before the packaging in Mac the relative path is that where the main .jar is located an so the code works because the webapp folder is found. Instead after the bundle the path became /Users/MyUser/webapp and of course the folder is not found because it is bundled inside the file.app near the libs folder.
Someone can explain me if this behaviour is due to JavaFx packager and how I can solve the problem in a elegant way?
Thanks very much

Some good soul has any idea?
Thanks

Business Package for ISA and Oppurtunity Management

Dear Portal Gurus,
We need to implement ISA and Oppurtunity Management from inside EP.
Pls let me know which Business packages might be useful.
Thanks much.
Josh.

If u have correctly deployed Business package using JSPM means it wil show defeintely show in PCD
goto content admin -- portal content -- content provided by sap -- specalist -- here u can see ur BP
and also see SAP Note:731386
Regards
Krishna.

Making packages for i686 and x86_64

Similar Messages

Maybe you are looking for