Making PDF Error

Hi
I am working in Indesign CS5 When I making PDF in Indesign it shows like below.
What is this?

There are two things going on that the message is telling you. Your doument has a transparency blend space of RGB, which would be correct if the images are RGB, but would be incorrect if they have already been converted to CMYK.
Your export settings are specifying a conversion to CMYK, which might also be correct for press output where the printer cannot do the color conversion in the RIP. The message also implies that you are flattening transparency, which also may not be necessary, depending on your printer's requirements.
IN any case, this is a warning that there may be undesirable color shifts. You should go ahead and make a PDF, then look at it. If you find it is not what you want, try changing the transparency blend space inthe document to CMYK and try again.

Similar Messages

Saving As PDF errors in FM10

I have been producing PDFs by using Save As PDF instead of Print Book because I have an EPS file that gets screwed up during color conversion (I need to uncheck that color conversion option). Today is the first time I have noticed the following error message appearing in the FrameMaker Console after I produce a PDF using the Save As PDF option (and this message has appeared for multiple books that I have been making PDFs of):
Save as PDF failed to post-process the PDF file for Reflow: Unable to save the reprocessed PDF file.
The PDF file should be intact and usable but may not reflow properly. Check that the destination PDF file is not in use or its permissions, then Save as PDF again. If the problem persists, please contact Adobe Technical Support.
What does this mean? All the PDFs look correct, print correctly, and get uploaded correctly, so I don't understand where the error is and what is causing it. Any ideas?
I am running FM10 and CS5.5 on a Windows 7 32-bit machine.
Thanks,
Smitty

Smitty,
When you use the Save As PDF option in FM, there are some automatic post-processing options that are applied in the background. These are specified in the maker.ini file, e.g.
FMMediaAnnot=Standard, Post-process PDF for Media Annot,fminit\fmmediaannot.dll,all
FRAME2pdf=Standard, Post-process PDF for 3D Annot,fminit\frame2pdf.dll,all
PDFSize=Standard, Optimize PDF Size, fminit\pdfsize.dll,all
FMPDFReflow=Standard, Post-process PDF for Reflow, fminit\fmpdfreflow.dll,all
It looks like, in your case, the PDF reflow module isn't able to properly grab the PDF file (or perhaps write to a temp area to work with it) to do it's stuff. If you don't need the document for Accessibility nor created a Taggged PDF version, then you don't need this option anyway. You can disable it by commenting it out with a ";" at the start of the line the maker.ini file.

PDF Error in Performance Management

Hi
When launching the Performance Management link from Manager Self Service (Role) --> Talent Management --> Performance Management I am getting the PDF error. Seems the page is trying to open the form in PDF, instead I want it to be displayed in html itself.
For Travel Expense form I have changed the URL parameter "sap.xss.tra.UsePdf=true" for the resource EMPLOYEE_TRAVEL_TRIPFORM_SRV05.
What is the PCD Object and the resource key for the corresponding Performance Management iView.
Thanks,
Murthy

Did you get this error in the initial landing page?
Please detail out the error. And for the pcd location, it depends on the role you created unless you are using standard objects.
This iview should have a webdynpro application.

File does not begin with '%pdf' error with adobe reader 10.1.5 onwards

In our web application we are using activePDF toolkit (3rd party component) to fill up carrier forms on the fly which are PDF files.
The output file processed by the above library works fine when opened with adobe reader 8, 9 and10 on end user’s browser (IE); however, it gives below error when opening with adobe reader 11.
Till now, we have tried different settings at IIS level, Internet explorer e.t.c. suggested on different internet posts. However, we are still facing the problem.
While analyzing this we have come across following link
http://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html
According to this adobe 10.1.5 onward file should only start with "%pdf". If file start with other than this we get file corrupted message.
Before we can communicate this message to client we want to confirm this for experts. Please let me know my assumption is right?

Rahti - i'm having the same issue but I not familiar with the steps outlined in the Adobe link below
http://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html
Would you be able to help with how I can navigate to this on my PC to correct it for me.
Thanks.

The numbering format keeps changing when making PDF's from Word 2007 ? Using Acrobat 9 Pro Extended

The numbering in (Contents) format keeps changing when making PDF's from Word 2007 ? Using Acrobat 9 Pro Extended.

The issue is that I have made up a contract in Word.
The second page has a list of all contents of the contract.
gghhjhhbhbhhbhbjbhj....1
bv v vghvjvjnnnnnnnnn....2
When we convert to PDF some of the numbers change. Example 20 becomes 201.
Your help is appreciated.
Cheers Ocean designs.

Acrobat X Pro hangs when making PDF. Using on Windows 7 64. Just started hanging. Uninstalled and reinstalled. Installed update. Once it hangs, must go into crtl, alt, delete to force close.

Acrobat X Pro hangs when making PDF. Using on Windows 7 64. Just started hanging. Uninstalled and reinstalled. Installed update. Once it hangs, must go into crtl, alt, delete to force close.

As a debugging step, try printing to the Adobe PDF printer. If that fails, repeat with print-to-file selected. Assuming the print succeeds, open the file in Distiller to complete the creation of the PDF. If you get the PDF, then check to see if AcroTray is properly working as a background task.

Failed to open pdf error on every document

Today I came and started placing pdf documents in Indesign CS3 like I always do, and suddenly I start getting "failed to open pdf" errors on every pdf file I try and place. I have tried all the suggested tactics of selecting show import options, changing the crop to bounding box, etc. Nothing working.
I also tried to open the pdf in acrobat and export into a different format or optimize it using the pdf optimizer, but when I do that I get gobbly **** text on the pdf. See screenshots
The only workaround that works is to save as a raster image. But this is incredibly time consuming. I also tried importing these same files into Indesign cs 4 and I get the same errors. I am wondering if this is a system wide issue. Any ideas or suggestions?
I noticed all these pdf were created using cs4 and above. Not sure if this helps.

Hold the Shift key as you click Place or turn on Show Import Options in the Place dialogue.
I get this from time to time. Here’s what I think happens: You placed a PDF with Import Options showing so you could select a different crop method, like bleed. This becomes the new default import option for PDF files. But if you import a file with no bleed data InDesign gives an error message instead of either jumping to import options or telling you the default crop options are unavailable for this file. I would call it a bug. I have encountered it from at least version 4 (aka CS2).

Hyperlink in making PDF

Hi all. I am making PDF file using Adobe Illustrator CS.
Suppose I am writing something like "XYZ" in my pdf file, by clicking that it should go to some specific website, Its just similar to CTRL+Click in WORD file.Pls help me.
Thankyou

Normally the best way to create an add is to to do it and to export it as PDF/X-4.
From Photoshop you can save as PDF, choose either the standard as the printer asks for or save as PDF/X-4.
Never use in any case EPS.
If the add contains vectors and/or fonts PDF is the best file type.
If no text or vectors are used you could use JPG with high compression quality, tiff or (not in your case) psd.
Take care that
Your file is not flattened to background, so all layers are alive, otherwise fonts will be rasterized.
You file should have a resolution in minimum between 240 and 300 ppi (not dpi)
With the text: is it pure black or is it 4c-black? K-Black is easier to accomplish in InDesign.
Don't make small elements in 4c.

Image size difference making PDF's in Bridge

Making PDF's in Bridge on a Mac. The image size I am using is 199 x 300 pixels (5.3 x 8 cm) and when I add a horizontal image to the output preview box, the images retain that size, however, when I add the vertical images to the preview box, although they still show as the same pixels, they display and print at 3.5 x 5.3 cm, much smaller. Need help, please.

however, all the prints need to be the same orientation. Both vertical and horizontal prints appear on the same page.
CS6 has also brought back the old Contact sheet script but I don't think this will do it either. Both PDF output and Contact sheet script are meant mainly for contact sheet use. And both have the boundary box rules as it seems, maybe you should play more with dimensions and rows/columns but I doubt this will give you the result. In older versions there was picture package which maybe was more what you needed?
Don't know why you need them to be the same size exactly? However as said, mainly for contact sheet use and not a sophisticated print module (a wish from many users)

%pdf error in downloading pdf from Function module

Hi,
I am trying to download pdf from a LinkToaction UI element.
I recieve %pdf" error when trying to download using below code. from backend perspective ABAPer said they are able to download PDF from ABAP program. Lokks like I am doing some mistake somewhere in below code.
From the backend, pdf is coming in a table in the form of SOLI-Text Line (TLine - SO_TEXT255)
In webdynpro I am tried to take each line from that table and attched to a IWDResource as below.
Please correct me if anything wrong here to get out of %pdf" error.
IModel_Pdf_FileNode Model = wdContext.nodeModel_Pdf_File();
IPDFElement pdf = wdContext.nodePDF().currentPDFElement();
if (Model != null && Model.size() > 0)
ByteArrayOutputStream baos = new ByteArrayOutputStream(1024);
try {
   for (int i = 0; i < Model.size(); i++){
      IModel_Pdf_FileElement Element =
                                             Model.getModel_Pdf_FileElementAt(i);
     baos.write(Element.getLine().getBytes());
    IWDResource resource =WDResourceFactory.createCachedResource(
          baos.toByteArray(),
          "Test",
          WDWebResourceType.PDF);
    pdf.setBinaryResource(resource);
Thanks
Praveen

Thanks for the sample. I use version NWDS7.0 and I don't find IContent type in my NWDS after re-organizing import statements.
currently I use below code to get the PDF on click of LinkToaction UI element (After I set the pdf from backend above part of the code).
{code
IWDResource pdfResource = wdContext.nodePDF().currentPDFElement().getBinaryResource();
               String pdfURL = pdfResource.getUrl(WDFileDownloadBehaviour.OPEN_INPLACE.ordinal());
          IWDWindow window =
          wdComponentAPI.getWindowManager()
          .createNonModalExternalWindow(pdfURL , "Test");
          window.show();
{code}
Currently above code giving %pdf" error when clicking LTU UI elemnt.
Please suggest How I need to adjust your sample in my case.
Thanks
Praveen

PDF Error 109

Attempting to print from an Adobe PDF results in printing only "PDF Error 109: trailer missing or invalid" on a single page. The remainder of the document does not print.
This problem is intermittent, some files print OK some don't.
Anyone ever encounter this?

Thank you

Financial Reporting Studio - pdf error

I have one FRS report that will not produce a pdf when running as a view in Workspace or when running as a batched report. All my other reports are working fine. This reports does preview/print in the Reporting Studio and works in HTML on Workspace. It also ran correctly in the past. Currently when opening in pdf format on Workspace it begins to run then displays a window with this message:
"Website cannot display the page"
When running in a batch the batch errors out with this message:
Executed "FOP/Income Statement Summary - RDD" successfully
Status for various save options for "FOP/Income Statement Summary - RDD"
Error while saving as PDF
Error unmarshaling return header; nested exception is:
java.io.EOFException
I can run the other reports in batch and they save correctly to the same place that this report should be going. So it not a permission issue to the directory where is should be saving the file.
Thanks in advance

Have you checked the logs? When I first saw the subject, I thought it was due to lack of Ghostscript installed on the FR Studio server, but looks like it is not the case.
Also a long shot, but does it happen in other machines?

On a Mac ios10.10, using online service Export PDF, error message appears,"An error occurred while trying to access service."

Can you advise steps I might take now? On a Mac ios10.10, using online service Export PDF, error message appears,"An error occurred while trying to access service."

Hi Ringdoc,
Please see this document: "Error occurred when trying to access this service" when logging on to Acrobat.com
Let us know how it goes!
Best,
Sara

Hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225

hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225 error, but without success. thanks a lot and best regards

BS heißt "Bull___****". *lol* "Betriebssystem" heißt imemr noch "operating system". GoLive wirste wohl gar nicht zum laufen kriegen. ohnehin würde man es nicht mehr verwenden, weil es noch nicht mal CSS2 voll unterstützt geschweige denn HTML 5 und andere moderne Webstandards. Wenn überhaupt, dann findeste vielleicht noch 'ne OEM CD von Strato oder 1und1 bei eBay. Die haben das damals mit jedem neuen Hostingvertrag rausgehauen. Aber wie gesagt, es ist den Aufwand nicht wert. Illustrator sollte sich durchaus installieren lassen. Eventuell einfach nochmal die Installer im Win XP Kompatibilitätsmodus laufen lassen...
Mylenium

Bad PDF; could not read page structure. Bad PDF; error in processing fonts: unsupported Type2 font

I created a "form" in MS Word using a table with blanks for where the fill-in fields are supposed to go. I converted the file to PDF, and then I tried to use the PDF Forms maker with the automatic field detection feature (Acrobat 8 Pro) but I keep getting the error "Bad PDF; could not read page structure. <Bad PDF; error in processing fonts: unsupported Type2 font> [1]" What could be causing this? Is there something I need to do in Word to make the field recognition work? The field recognition has worked with other PDFs that I have not created in Word. I'd rather not have to create each individual field myself, if I don't need to. I thought this was a great feature when I have used it on other PDFs, but I need to figure out what I'm doing wrong on forms I am creating myself in Word.<br /><br />I am using a MacBook with Leopard, all updates installed, Office:MAC 2008 and Adobe Acrobat 8 Professional.<br /><br />Thank you in advance!

I got where you were going with this, so I printed with the Adobe 8.0 printer and then I was able to use the auto field detection. THANKS!!

Making PDF Error

Similar Messages

Maybe you are looking for