Making phone calls on Macbook Pro not working

Hello,
I have a Macbook Pro 15" late 2013 model which I have updated to Yosemite along with an iPhone 6 running iOS 8.1
I cannot seem to make phone calls off my Macbook Pro, it just says 'call failed' try again. The screen on my iPhone does not change to the calling screen, nothing happens on the iPhone.
However, I can receive incoming calls, both FaceTime audio, FaceTime video and normal cellular calls on the Macbook Pro. I just cannot make cellular calls off my mac.
All my settings are correct, same Wifi, bluetooth all turned on. Same apple ID, cellular setting under FaceTime turn on both mac and iPhone.
Obiviously it is correct because i can answer phone calls on the macbook, but for some odd reason, my macbook doesn't seem to be communicating with the iPhone when i try to make calls off the macbook.
Please help, thanks in advance.

It's possible that it's burned out.  
I'd try a SMC reset following these instructions:
http://support.apple.com/kb/HT3964
Regards,
Captfred

Similar Messages

  • Why does the internet on my new macbook pro not work when my old macbook's does?

    Why does the internet on my new macbook pro not work when my old macbook's does? I'll have to turn the wifi off and back on multiple times to get the internet to continue to work on my Macbook Pro (running mountain lion but did it on lion also) when it runs fine on my old white Macbook (running lion). Is there something I can do to fix it or do I just have to deal with it?

    Here is your fix .. I have uploaded my properly calibrated profile get it here :
    http://www.megaupload.com/?d=YAJL6A9X
    And it should go to your user folder/Library/ColorSync/Profiles
    if you have one already you can rename either one ..
    and then go to system preferences - displays - color to select the profile .
    you will get rid of the blue tint while keeping correct color and gamma
    This is for the newer 2010 MBP's altho if same display was used might also give good results in the previous models as well . .

  • Macbook pro not working without battery

    my macbook pro not working if i remove the battery
    & if the battery is empty my macbook pro not working before charging

    Try an SMC reset:
    http://support.apple.com/kb/HT1411
    You should not run on AC with the battery removed. The MBP should work that way, but the OS throttles back the CPU so running like that is not recommended.

  • I get an error message "iPhone is already on a call" when making phone calls from Macbook Air. What can I do to fix this problem?

    I have followed the instructions exactly according to Apple for making phone calls from my Macbook Air. Im signed in to iCloud on both devices. Im on the same wifi network. Wifi calls is turned off on my iPhone. Any suggestions?

    Howdy jcannon130,
    Thanks for using the Apple Support Communities.
    To troubleshoot this issue where your Mac believes you iPhone is still on a call while trying to make a call from your Mac, please first reset your iPhone, and then verify you have the settings configured correctly on your Mac and iPhone.
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Get help using Continuity with iOS 8 and OS X Yosemite - Apple Support
    Happy Holidays!
    Alex H.

  • IMessage on MacBook Pro not working anymore?

    Hi, so here I will lay out my whole problem.
    I have a MacBrook Pro and have had no problems with iMessage in my entire life. But I recently broke my iPhone 5C, and ordered a used Verizon 4s off Ebay, and when I activated it I was immediately able to use iMessage from my cell phone. But it refuses to work on my laptop. Every time I try to log in with my Apple ID again on iMessage on my laptop, it processes for a few seconds and then says "Could not sign into iMessage: The server encountered an error processing registration. Please try again later."
    It has been like this for a couple weeks, and I try every once in a while just to see, with no luck.
    Today I tried to see if FaceTime would activate with my apple ID and that wouldn't work either.
    My apple ID works perfectly on my phone for app downloads and everything else, so I don't think it could be my ID....
    Does it have to do with my new phone? Is there a setting on there I have to change so I can access iMessage on my laptop?
    Or is it just my laptop?
    (* I do have the iOS 8 update on my 4s, btw)
    Thanks!

    This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
    Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
    Step 1
    Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
    Step 2
    Sign out of iMessage on all your Apple devices. Log out and log back in. Try again to sign in.
    Step 3
    Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
    Step 4
    From the menu bar, select
               ▹ About This Mac
    Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
    Step 5
    Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
    Step 6
    From the menu bar, select
               ▹ System Preferences... ▹ Network
    If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OKand then Apply. Test.
    The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
    Step 7
    Select from the menu bar
               ▹ System Preferences… ▹ Flash Player ▹ Storage
    and click
              Block all sites from storing information on this computer
    Close the preference pane.
    Step 8
    Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
    Step 9
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    If iMessage worked in the guest account, stop here and post your results.
    Step 10
    Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound outputand Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
    If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
    Step 11
    Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/com.apple.apsd.plist
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    Step 12
    Reset the NVRAM.
    Step 13
    Reinstall OS X.
    Step 14
    If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

  • One speaker on MacBook Pro not working for certain programs?

    When I either receive or place a FaceTime call on my MacBook Pro, the left speaker cuts out audio and produces high static.  The right speaker is fine.  The receiving end can also hear the static feedback, but their two speakers work fine.  I have all my iOS devices setup to receive and place FaceTime calls (iPhone 5s, iPad, and MacBook Pro 15 inch late 2011).  If I place or receive the FaceTime calls on my iPhone or iPad, there is no problem. 
    I've tested the speakers, youtube, iTunes audio, streaming websites, netflix, etc... and all works fine on the MacBook Pro.  Just FaceTime.  I also went into system preferences and the speaker setup is correct (audio in and out - internal speakers).
    I've also restarted, reinstalled Yosemite...still FaceTime left speaker problem.
    I appreciate any troubleshooting advice and/or if others have experienced this problem.
    Thanks!

    The Troubleshooting FaceTime for Mac OS X:FaceTime for Mac: Troubleshooting FaceTime - Apple Support does not offer much in the way of help for the problem you are having.
    Have you tried going to System Preferences, Sound, Output and playing around with the Balance to see if that makes any difference?
    You might also consider going to FaceTime, Preferences and turn FaceTime OFF and then back ON.
    And to have the system checked, you could take it to an Apple store genius bar and have the techs see if there is something hardware-wise interfering with FaceTime.

  • Need help one USB Port on MacBook Pro not working

    Its been a weak now and im getting tired of my MacBook pro USB not reading anything.. It wont read/connect usb drives, IPods/IPhones/IPads, and Android phones. I have tried the PRAM and SMC resets and nothing has worked i even left my Macbook pro off for a whole day. ITS ONLY ONE PORT NOT WORKING, i took it to bestbuy because its closest to me but geek squad just did what i explained above and told me get a USB hub and NO! i want to fix this issue... Anyone has had this happen can you let me know if its because the USB port is no longer working or a software issue... Also i keep getting this notification telling me USB devices disabled draining to much power but i have nothing connected!!
    ps- my MacBook Pro is getting very hot fast and it happens when im not even using it, i get home and it very hot could there be another hardware failure i dont leave applications open when i sleep it.

    It sounds like you might have a hardware problem. Your best bet is to go to the Genius Bar. The evaluation is free, and they'll fix it if you're under Applecare. Back up your stuff first though.

  • MacBook Pro not working, and I'm in China

    Hello everyone, I am posting on here because there is no way to email customer support and I am currently lacking the ability to make phone calls. Sorry, but I'm about to get a little personal here (note: I added this little note in later after I realized how ridiculous I sounded) - I am currently 48 hours without sleep; that is my excuse. My 4 year old MacBook Pro seems to have sh*t the bed, and the worst possible time. I have just spent every last penny I had to come out here to China to seek bigger and better opportunities and my side kick is this here dead laptop. I don't treat this thing like crap. She's a little banged up, got a cracked screen, but this all happened within the first year or so of getting her (freshman year of college about sums it up), so I assume this has nothing to do with any of those shenanigans. I don't download things, or do whatever else that would make her act this way. I use the Internet, and save Microsoft Word and Powerpoint (downloaded in 2011) documents. That's about all. Everything is on there in that little box that I need, to be out here. Absolutely everything. Most importantly, all of my resume, cover letter, and school information that I need to get my life started out here. I don't speak the language, I don't know anybody, I can't ship this puppy out of here (e v e r y  l a s t  p e n n y [dont worry, my hotel is paid for for the next month, and it's free all you can eat breakfast]) but I'm not getting anywhere without this laptop. And to top it off, an old email address that may have had at least a partial resume on it is locked by Yahoo, and guess what the only way to unlock it is? that's right, I have to call them.
    Please tell me, what are my options? And thank you for taking the time to read my pathetic story. 
    Attachment that won't attach: I press the power button, and a file folder with a question mark blinks on and off for a minute and then she turns off.

    Hello again, D'Anna.
    Thanks for the update in regard to your issue. At this point, it seems like your issue may be hardware related.
    In your situation, you might be better served by seeking out an Apple Retail Stores or Apple Authorised Service Provider in your area.
    The following links are for China and Hong Kong, respectively. Depending where you're located in China, feel free to use whichever is pertinent to have your system looked at:
    Apple - 查找地点
    or
    Apple - Find Locations
    Cheers,
    Pedro.

  • Macbook Pro Not Working Right Why???

    Hello,
    I just got a new Macbook Pro. It worked fine for a couple of weeks and now there are multiple problems. Everytime I press the space bar my computer scolls down and whenever I press the delete button it backs up a page even if I am typing and am just trying to delete a letter. This is very frustrating when typing something very important and then losing it. Also Safari crashes alot of times. I am not computer savey so I might have done something wrong but am not sure what. Has this happened to other people or just me?
    Thank you

    This could be a number of problems... not likely something you did wrong.
    If you're still under the initial warranty period or purchased the "Apple Care Protection" plan, I'd suggest you either visit a Genius Bar at an Apple Store, or call Apple Support.  Check the Self Service and "Contact Us" sections of www.apple.com/support

  • Bluetooth from iPhone 3GS to MacBook Pro not working?

    I am having (seemingly) bluetooth connection issues with "some" devices to my MacBook Pro.  I note:
    * Mouse pairs fine
    * iPhone 3GS does not remain connected (focus of this forum question)
    Error - after pairing my iPhone 3GS to my MBP I get an error:
    The Bluetooth Network is Unavailable
    There was an error connecting your device.  Make sure the device is turned on and in range.
    Notes:
    * MacBook Pro details:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro6,2
      Processor Name:          Intel Core i7
      System Version:          Mac OS X 10.7.3 (11D50b)
    Background: Ultimately interested in teethering my iPhone 3G data connection to my MacBook Pro, but for the moment the bluetooth connection won't even remain in place.

    nothing in these articles helped unfortunately - some more clarification:
    tethering via USB from iPhone 3G to MacBook Pro => WORKS
    tethering via Bluetooth => does NOT work, with bluetooth connectioning not staying up
    During pairing process:
    devices "see each other"
    pairing appears to work, then you see that the connection drops out directly afterwards (almost immediately)
    on iPhone message = "Connection Unsuccessful - XXX's MacBook Pro is not supported"
    on MacBook - it's just the connection in Bluetooth options shows up as not connected
    in /var/log/system I see some bluetooth related lines:
    Apr 18 19:33:14 Gregs-MacBook-Pro bnepd[18950]: [IOBluetoothDevice instantiateChannel] BluetoothHCIAuthenticationRequested failed (0x0006), so retry
    Apr 18 19:33:14 Gregs-MacBook-Pro sandboxd[18966] ([18950]): bnepd(18950) deny mach-lookup com.apple.blued
    Apr 18 19:33:14 Gregs-MacBook-Pro bnepd[18950]: [IOBluetoothDevice instantiateChannel] BluetoothHCIAuthenticationRequested failed (0x0006), so disconnect device
    Apr 18 19:33:53 Gregs-MacBook-Pro blued[22]: Removing Bluetooth configured device: 00-26-08-23-23-9d
    Any other ideas?  Is it a physical problem with my MBP?  but then again my bluetooth mouse stays connected ok.  And in terms of the iPhone well it tethers fine to the iPad via bluetooth....

  • IMessage on Macbook Pro not working

    All of a sudden my macbook pro's iMessage stopped working! Every time I'd send a message, a red circle with an exclamation point pops up on the side of the message. Somedays it'll be on and off where i could send iMessages but only receive one on my mac. I already reinstalled os x and deleted everything, but iMessage wouldn't work on my mac. Same goes for FaceTime! When I accept a FaceTime call, the whole window goes to the side and disappear. Help!!!!

    Hi,
    If On, try turning Off the iCloud Keychain item in the System Preferences > iCloud.
    8:55 pm      Saturday; June 28, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Acer monitor connected to macbook pro not working

    my macbook pro running Lion 10.7.1 when connected to an Acer X221W monitor does not duplicate screens.  I connected it with a mini port to VGA adapter.  there is no software from Acer available.  I there a way to make this work?

    Press Command+F1.

  • New iMac as second display for MacBook Pro not working

    I just bought the new thin 2012 27" iMac as a replacement to the last model I had.
    I want to use the iMac as a second display for my 2012 MacBook Pro.
    I have a Mini Display Port to Mini Display Port cable that used to work with my previous setup and at work with my external display.
    However, this isn't working on the new iMac. When I try the Command + F2 suggestion I've seen in the forums here. Nothing happens.
    Do I need a new cable now that these are "thunderbolt" connections?
    Any help is greatly appreciated.
    Thanks.
    Demetre

    You will most likely need a Thunderbolt cable as they are both Thunderbolt devices and not Mini DisplayPort.

  • Macbook Pro not working right after getting it back from Apple Store

    I had to bring my last generation Macbook Pro into the Apple store to have a faulty optic drive and logic board replaced. I just got home and the date in the preferences was set to 2001 and it will not connect to my network, even though I am typing this on another Mac using the same connection. It does see it, it just shows a message with an exclamation mark in the Airport area saying no internet connection.
    Any ideas of what I may need to do? Are both of these a sign that they may have messed something up? I did reboot it after getting it back.
    Thanks.

    Just bring it back. Have them check it out and demonstrate that it's working properly.

  • MacBook Pro not working.

    Hello there.
    I have a MacBook Pro that I accidently spilled my glass of milk over. Right after I spilled it, i cleaned it up, but I believe some of the milk went down the space between the keys. As normal all hardware etc works as before, but some of my keys like shift and right arrow does not work anymore.
    Is there anything I can do to fix this problem?

    Liiquid contamination is often fatal for computers.  You can take it to Apple for a free diagnosis and estimate of repairs.  Often the repairs would be expensive and people consider a replacement instead of a repairs.  You can probably salvage the disk to recover the data on it.

Maybe you are looking for

  • Open GL Version Error

    My Java 3D application is showing open gl version error as shwon below: javax.media.j3d.IllegalRenderingStateException: GL_VERSION *     at javax.media.j3d.NativePipeline.createNewContext(Native Method)* *     at javax.media.j3d.NativePipeline.create

  • File upload

    Hi gurus, I am working on interface where I need to use a BAPI to create PO, the file can come either from the PC or from the unix server, I think in the below code I have taken care of the file that will be coming through the PC but can you please h

  • Using internal software update server (SUS) with iTunes

    We are using an internal software update server (SUS) to manage the release of patches, etc. to our mac clients. There are no known issues with this server or the process. However, it appears that iTunes is still checking Apple's website first for up

  • Missing Acrobat 9 toolbar in Microsoft Word 2000

    Was the Acrobat toolbar that appeared in Microsoft Word using Acrobat 8 removed from Acrobat 9? If not, how can I get it to show up? Thank you.

  • No value for given parameters error when using command parameters in RDC.

    I am trying to create a report using RDC with a parameter in the query, but I keep getting "No value for given parameters" error.  Here is the code I use: Dim creport As CRAXDDRT.Report Dim appn As CRAXDDRT.Application Dim datcmd1 As New ADODB.Comman