Making PLL library code amendments effective in Reports 10G
What is necessary to cause a change to a PLL library program unit that is shared by many reports effective in all the reports?
I have read:
*[http://www.tek-tips.com/viewthread.cfm?qid=1021116&page=13|http://www.tek-tips.com/viewthread.cfm?qid=1021116&page=13] +"to make changes available you need not only to save the changes, but to delete and reattach it in the Attached Libraries node."*
Is this correct?
If so, doesn't this make PLLs pretty useless for Reports common code ?
I am using Reports 10G.
Jonathan
You can have just pll files in the directory, but Reports has to compile the library every time you use it. Therefore it is better to deploy plx files.
When you deploy at a customers site, it is always better to give them the plx files, since they cannot change the code that way.
If you get an error message deploying the plx, it probably means that the database where you developed your pll and the database where you deploy the plx are not the same. See if there are any differences (in table structure, stored procedures etc.). Maybe you have hardcoded schema owner or something in you pll.
Similar Messages
-
WAM (Work Asset Management) report, srpt.pll library missing.
Hi All,
I Just installed WAM 1.9 on my vmware. i try to create customize report from the current wam report. when i opened the current report on oracle report developer it shows an error message "Cannot find srpt.pll library".
I've try to search the srpt.pll library on the wam installation directory, but i only found srpt.plx not srpt.pll
did anyone know where to find srpt.pll library
RegardsI've try to search the srpt.pll library on the wam installation directory, but i only found srpt.plx not srpt.pll
did anyone know where to find srpt.pll libraryPlease see (Unable to find PL/SQL library 'srpt'. REP-1401: 'beforereport': Fatal PL/SQL error occurred [ID 985585.1]).
Thanks,
Hussein -
T-code to see the report generated by a Report Writer.
Hi,
I am new to report writer and need your help.
I have a output which is generated through a report writer.
I need to compare the code that generated this output in development and production systems.
The only information I have is the library name and a z report name which gives the output.(throgh t-code GR33)
But when I try to execute the same report in Se 38, it says that te report does not exists .
Please suggest what is the t-code to see the report generated by a report writer , so that I can compare the codes in different systems.
Thanks,
Suchi.Hi,
Thanks for the replies.
The actual issue is :
I have a report created by report writer in 2 languages in Chineese and in English.
In the selection screen of the chineese report some of the labels are missing.
It is getting printed as ####### instead of fiscal year , Period etc.
This is happening only in production while in the development system it is correct (Both the chineese and the English selection screen ).
I guess this is a transportation issue.
Please suggest.
I am ot able to see the Transport Requests associated with it .
Can you please guide me for the same.
Where can I see the TRs associated with this report. -
Revision: 15984
Revision: 15984
Author: [email protected]
Date: 2010-05-10 05:50:23 -0700 (Mon, 10 May 2010)
Log Message:
FM-848: adding unit test that holds the code to reproduce the reported bug.
Ticket Links:
http://bugs.adobe.com/jira/browse/FM-848
Modified Paths:
osmf/trunk/framework/OSMFTest/org/osmf/elements/compositeClasses/TestCompositeMetadata.asMy apologies about the wall of text. After I made my original post, I thought maybe it would better to go back and put it in a pastebin instead. I was not able to edit that post once I sent it.
In regards to your question, the permissions on the
/Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist file is "read and write" for system, wheel and everyone. -
I need a code for VENDOR AGEING REPORT
plz help me i am in urgent need of source code of
VENDOR AGEING REPORT.
if any body help me regarding this above report i will be
great ful to him/her.
bcoz deadline is today.
i need ur urgent help, i treid very much but i failed,
so hope help from anybody there.REPORT zvender_os NO STANDARD PAGE HEADING
LINE-SIZE 132
LINE-COUNT 65.
Tables
TABLES: bsik, "open items (A/C: Secondary Index for Customers)
lfa1, "customer master
lfb1,
rf140, "temp stru (Work Fields for Corrence(SAPF140*))
bsak, "cleared items (A/c Secnd Index for Cust(Clrms))
skat.
constants and variables
TYPE-POOLS: slis.
DATA: fieldcat TYPE slis_t_fieldcat_alv,
fieldcat1 TYPE slis_t_fieldcat_alv,
fieldcat_ln TYPE slis_fieldcat_alv,
layout_in TYPE slis_layout_alv,
layout_in1 TYPE slis_layout_alv,
sortcat TYPE slis_t_sortinfo_alv,
sortcat1 TYPE slis_t_sortinfo_alv,
sortcat_ln LIKE LINE OF sortcat,
eventcat1 TYPE slis_t_event,
eventcat TYPE slis_t_event,
eventcat_ln LIKE LINE OF eventcat,
col_pos TYPE i.
DATA: targ_month(2) TYPE n, "0001
targ_year(4) TYPE n, "0001
targ_mth_abs TYPE p, "0001
doc_month(2) TYPE n, "0001
doc_year(4) TYPE n, "0001
doc_mth_abs TYPE p, "0001
mth_result TYPE p, "0001
doc_days TYPE p,
targ_days TYPE p,
addl_days TYPE p,
ext_days TYPE p,
v_days(3) TYPE c,
v_kkber LIKE knkk-kkber.
DATA:
BEGIN OF inrec OCCURS 1000, "0001
lifnr LIKE bsik-lifnr,
belnr LIKE bsik-belnr,
gjahr LIKE bsik-gjahr,
bldat LIKE bsik-bldat,
xblnr LIKE bsik-xblnr,
blart LIKE bsik-blart,
sgtxt LIKE bsik-sgtxt,
shkzg LIKE bsik-shkzg,
dmbtr LIKE bsik-dmbtr,
zfbdt LIKE bsik-zfbdt,
zbd1t LIKE bsik-zbd1t,
zbd2t LIKE bsik-zbd2t,
zbd3t LIKE bsik-zbd3t,
zuonr LIKE bsik-zuonr,
END OF inrec.
DATA:
BEGIN OF inrect OCCURS 1000, "0001
lifnr LIKE bsik-lifnr,
belnr LIKE bsik-belnr,
gjahr LIKE bsik-gjahr,
bldat LIKE bsik-bldat,
xblnr LIKE bsik-xblnr,
blart LIKE bsik-blart,
sgtxt LIKE bsik-sgtxt,
shkzg LIKE bsik-shkzg,
dmbtr LIKE bsik-dmbtr,
zfbdt LIKE bsik-zfbdt,
zbd1t LIKE bsik-zbd1t,
zbd2t LIKE bsik-zbd2t,
zbd3t LIKE bsik-zbd3t,
zuonr LIKE bsik-zuonr,
END OF inrect,
BEGIN OF t_item OCCURS 1000, " 0001
lifnr LIKE bsik-lifnr,
belnr LIKE bsik-belnr,
gjahr LIKE bsik-gjahr,
bldat LIKE bsik-bldat,
xblnr LIKE bsik-xblnr,
blart LIKE bsik-blart,
sgtxt LIKE bsik-sgtxt,
zfbdt LIKE bsik-zfbdt,
dmbtr LIKE bsik-dmbtr,
days(3) TYPE c,
zuonr LIKE bsik-zuonr,
END OF t_item,
t_line LIKE t_item OCCURS 1000 WITH HEADER LINE, " 0001
BEGIN OF itab OCCURS 1000,
lifnr LIKE lfa1-lifnr,
total LIKE bsik-dmbtr,
zfuture LIKE bsik-dmbtr,
zcurrent LIKE bsik-dmbtr,
crbal LIKE bsik-dmbtr,
30days LIKE bsik-dmbtr,
60days LIKE bsik-dmbtr,
90days LIKE bsik-dmbtr,
99days LIKE bsik-dmbtr,
120days LIKE bsik-dmbtr,
180days LIKE bsik-dmbtr,
365days LIKE bsik-dmbtr,
bzirk LIKE knvv-bzirk,
vkbur LIKE knvv-vkbur,
vwerk LIKE knvv-vwerk,
vkgrp LIKE knvv-vkgrp,
klimk LIKE knkk-klimk,
cashd LIKE knkk-cashd,
grupp LIKE knkk-grupp,
erdat LIKE lfa1-erdat,
name1 LIKE lfa1-name1,
name2 LIKE lfa1-name2,
stras LIKE lfa1-stras,
ort01 LIKE lfa1-ort01,
telf1 LIKE lfa1-telf1,
psort(10),
sperr LIKE lfa1-sperr,
totsal LIKE bsik-dmbtr,
txt50 LIKE skat-txt50,
gsber LIKE bsik-gsber,
END OF itab.
DATA: sel_tab TYPE TABLE OF rsparams WITH HEADER LINE,
p_debit(1) TYPE c,
p_credit(1) TYPE c.
DATA: t_variant LIKE disvariant OCCURS 0 WITH HEADER LINE.
parameters and select-options
SELECTION-SCREEN BEGIN OF BLOCK blck0 WITH FRAME TITLE text-002.
PARAMETERS: stida LIKE sy-datum DEFAULT sy-datum OBLIGATORY,
p_bukrs LIKE t001-bukrs DEFAULT 'PIIL' MEMORY ID buk
OBLIGATORY.
P_BUKRS LIKE T001-BUKRS DEFAULT 'CC01' OBLIGATORY. "0003
SELECT-OPTIONS: s_lifnr FOR bsik-lifnr ,
s_vkbur FOR knvv-vkbur,
s_vkgrp FOR knvv-vkgrp,
s_bzirk FOR knvv-bzirk,
s_konda FOR knvv-konda,
s_kdgrp FOR knvv-kdgrp NO-DISPLAY ,
s_kvgr2 FOR knvv-kvgr2 NO-DISPLAY ,
s_kkber FOR knkk-kkber NO-DISPLAY ,
s_grupp FOR knkk-grupp NO-DISPLAY ,
s_ctlpc FOR knkk-ctlpc,
s_akont FOR lfb1-akont,
s_gsber FOR bsik-gsber.
PARAMETERS: p_future AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK blck0.
SELECTION-SCREEN BEGIN OF BLOCK blck1 WITH FRAME TITLE text-002.
PARAMETERS: p_abs RADIOBUTTON GROUP zrad,
p_due RADIOBUTTON GROUP zrad DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK blck1.
*SELECTION-SCREEN BEGIN OF BLOCK blck2 WITH FRAME TITLE text-003.
*PARAMETERS: c_run RADIOBUTTON GROUP zrac DEFAULT 'X',
c_blk RADIOBUTTON GROUP zrac,
c_all RADIOBUTTON GROUP zrac.
*SELECTION-SCREEN END OF BLOCK blck2.
*SELECTION-SCREEN BEGIN OF BLOCK blck3 WITH FRAME TITLE text-004.
*PARAMETERS: p_debit AS CHECKBOX DEFAULT 'X' ,
p_credit AS CHECKBOX DEFAULT 'X' NO-DISPLAY,
*selection-screen end of block blck3.
start-of-selection.
START-OF-SELECTION.
PERFORM BUILD_EVENTCAT.
p_debit = 'X'.
p_credit = 'X'.
PERFORM get_customer_invoices.
filter records based on selection criteria
PERFORM filter_records.
END-OF-SELECTION.
PERFORM add_sort_field.
PERFORM modify_field.
PERFORM write_report.
*& Form FILTER_RECORDS
To collect all the required data from DB and store them in
internal table.
--> p1 text
<-- p2 text
FORM filter_records.
delete records based on selection criteria
LOOP AT itab.
SELECT vkbur vkgrp vwerk erdat konda kdgrp bzirk kvgr2
INTO (itab-vkbur, itab-vkgrp, itab-vwerk, knvv-erdat,
knvv-konda, knvv-kdgrp,itab-bzirk,knvv-kvgr2)
FROM knvv WHERE lifnr = itab-lifnr
ORDER BY erdat DESCENDING.
AKS :- Not Required for PI
CASE itab-vkbur.
WHEN 'SA1'.
itab-vkbur = 'SF25'.
WHEN 'QLD1'.
itab-vkbur = 'SF23'.
WHEN 'WA1'.
itab-vkbur = 'SF26'.
ENDCASE.
AKS.
EXIT.
ENDSELECT.
IF itab-vkbur IN s_vkbur AND
itab-vkgrp IN s_vkgrp AND
knvv-konda IN s_konda AND
knvv-kdgrp IN s_kdgrp AND
itab-bzirk IN s_bzirk AND
knvv-kvgr2 IN s_kvgr2.
ELSE.
DELETE itab.
CONTINUE.
ENDIF.
SELECT SINGLE klimk grupp cashd
INTO (itab-klimk, itab-grupp, itab-cashd)
FROM knkk WHERE lifnr = itab-lifnr
AND kkber IN s_kkber
AND ctlpc IN s_ctlpc
AND grupp IN s_grupp.
IF SY-SUBRC NE 0.
DELETE ITAB.
CONTINUE.
ENDIF.
SELECT SINGLE skat~txt50
INTO (itab-txt50)
FROM lfb1 INNER JOIN skat
ON lfb1akont EQ skatsaknr
WHERE lfb1~lifnr = itab-lifnr
AND lfb1~akont IN s_akont
AND skat~spras EQ 'EN'.
IF sy-subrc NE 0.
DELETE itab.
CONTINUE.
ENDIF.
SELECT SINGLE name1 name2 telf1 erdat stras ort01 sperr
INTO (itab-name1, itab-name2, itab-telf1,
itab-erdat, itab-stras, itab-ort01, itab-sperr )
FROM lfa1
WHERE lifnr = itab-lifnr
IF sy-subrc NE 0 .
DELETE itab.
CONTINUE.
ENDIF.
AKS For Filteration of Customer base on Block Area.
IF c_all NE 'X'.
IF c_run EQ 'X' AND itab-sperr EQ 'X'.
DELETE itab.
CONTINUE.
ELSE.
IF c_blk EQ 'X' AND itab-sperr NE 'X'.
DELETE itab.
CONTINUE.
ENDIF.
ENDIF.
ENDIF.
MODIFY itab.
ENDLOOP.
ENDFORM. " FILTER_RECORDS
*& Form GET_CUSTOMER_INVOICES
text
--> p1 text
<-- p2 text
FORM get_customer_invoices.
DATA:ztotcre LIKE bsik-dmbtr.
DATA:ztotsal LIKE bsik-dmbtr.
DATA: fsdate LIKE sy-datum.
DATA: l_perio(4) TYPE c.
MOVE stida TO rf140-stida.
MOVE rf140-stida+4(2) TO targ_month.
MOVE rf140-stida+0(4) TO targ_year.
MOVE rf140-stida+6(2) TO targ_days.
targ_mth_abs = ( targ_year * 12 ) + targ_month.
CALL FUNCTION 'ZGET_PERIOD_FROM_DATE'
EXPORTING
i_date = stida
IMPORTING
e_perio = l_perio.
CONCATENATE l_perio '0401' INTO fsdate.
select open items.
IF p_due EQ 'X'.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt " 0001
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsik INTO TABLE inrect
WHERE bukrs = p_bukrs
AND budat LE stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
AND umskz NE 'T'
AND umskz NE 'F'
AND umskz NE 'R'
AND umskz NE 'P'
AND umskz NE 'J'
AND umskz NE 'L'.
LOOP AT INREC.
IF INREC-SHKZG = 'H'.
INREC-DMBTR = INREC-DMBTR * -1.
ENDIF.
MOVE-CORRESPONDING INREC TO T_ITEM. " 0001
PERFORM COLLECT_INVOICE USING INREC-lifnr INREC-DMBTR
INREC-ZFBDT INREC-ZBD1T
INREC-ZBD2T INREC-ZBD3T.
APPEND T_ITEM.
CLEAR T_ITEM.
ENDLOOP.
LOOP AT inrect.
inrec-lifnr = inrect-lifnr.
inrec-belnr = inrect-belnr.
inrec-gjahr = inrect-gjahr.
inrec-bldat = inrect-bldat.
inrec-xblnr = inrect-xblnr.
inrec-blart = inrect-blart.
inrec-sgtxt = inrect-sgtxt.
inrec-shkzg = inrect-shkzg.
inrec-dmbtr = inrect-dmbtr.
CALL FUNCTION 'NJ_CAL_DATE_IN_INTERVAL'
EXPORTING
date = inrect-zfbdt
days = inrect-zbd1t
months = 00
signum = '+'
years = 00
IMPORTING
calc_date = inrec-zfbdt.
inrec-zbd1t = inrect-zbd1t.
inrec-zbd2t = inrect-zbd2t.
inrec-zbd3t = inrect-zbd3t.
inrec-zuonr = inrect-zuonr.
APPEND inrec.
CLEAR inrec.
ENDLOOP.
ELSE.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt " 0001
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsik INTO TABLE inrec
WHERE bukrs = p_bukrs
AND budat LE stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
AND umskz NE 'T'
AND umskz NE 'F'
AND umskz NE 'R'
AND umskz NE 'P'
AND umskz NE 'J'
AND umskz NE 'L'.
ENDIF.
SORT inrec BY lifnr shkzg zfbdt .
LOOP AT inrec.
AT NEW lifnr.
For Customers Credit Balance Transaction to be display in Report
End of Credit Balance
ztotcre = 0.
ztotsal = 0.
ENDAT.
IF inrec-shkzg = 'H'.
inrec-dmbtr = inrec-dmbtr * -1.
ztotcre = ztotcre + inrec-dmbtr.
ELSE.
IF inrec-blart = 'RV'.
IF inrec-bldat GE fsdate.
ztotsal = ztotsal + inrec-dmbtr.
ENDIF.
ENDIF.
ztotcre = ztotcre + inrec-dmbtr.
endif.
IF p_debit EQ 'X'.
IF ztotcre > 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
ENDIF.
ENDIF.
ENDIF.
IF p_credit EQ 'X'.
AT END OF lifnr.
IF ztotcre < 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
APPEND t_item.
CLEAR t_item.
ENDIF.
ENDAT.
ENDIF.
ENDLOOP.
select cleared items
IF p_due EQ 'X'.
REFRESH inrect. CLEAR inrect.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsak INTO TABLE inrect
WHERE bukrs = p_bukrs
AND budat LE stida
AND augdt > stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
REFRESH inrec. CLEAR inrec.
LOOP AT inrect.
inrec-lifnr = inrect-lifnr.
inrec-belnr = inrect-belnr.
inrec-gjahr = inrect-gjahr.
inrec-bldat = inrect-bldat.
inrec-xblnr = inrect-xblnr.
inrec-blart = inrect-blart.
inrec-sgtxt = inrect-sgtxt.
inrec-shkzg = inrect-shkzg.
inrec-dmbtr = inrect-dmbtr.
CALL FUNCTION 'NJ_CAL_DATE_IN_INTERVAL'
EXPORTING
date = inrect-zfbdt
days = inrect-zbd1t
months = 00
signum = '+'
years = 00
IMPORTING
calc_date = inrec-zfbdt.
inrec-zbd1t = inrect-zbd1t.
inrec-zbd2t = inrect-zbd2t.
inrec-zbd3t = inrect-zbd3t.
inrec-zuonr = inrect-zuonr.
APPEND inrec.
CLEAR inrec.
ENDLOOP.
ELSE.
REFRESH inrec. CLEAR inrec.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsak INTO TABLE inrec
WHERE bukrs = p_bukrs
AND budat LE stida
AND augdt > stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
ENDIF.
SORT inrec BY lifnr shkzg zfbdt .
LOOP AT inrec.
AT NEW lifnr.
ztotcre = 0.
ztotsal = 0.
ENDAT.
IF inrec-shkzg = 'H'.
inrec-dmbtr = inrec-dmbtr * -1.
ztotcre = ztotcre + inrec-dmbtr.
ELSE.
IF inrec-blart = 'RV'.
IF inrec-bldat GE fsdate.
ztotsal = ztotsal + inrec-dmbtr.
ENDIF.
ENDIF.
ztotcre = ztotcre + inrec-dmbtr.
endif.
IF p_debit EQ 'X'.
IF ztotcre > 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
ENDIF.
ENDIF.
ENDIF.
IF p_credit EQ 'X'.
AT END OF lifnr.
IF ztotcre < 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
APPEND t_item.
CLEAR t_item.
ENDIF.
ENDAT. " 0001
ENDIF.
ENDLOOP.
ENDFORM. " GET_CUSTOMER_INVOICES
*& Form COLLECT_INVOICE
text
-->P_bsik_lifnr text
-->P_bsik_DMBTR text
-->P_bsik_ZFBDT text
-->P_bsik_ZFBDT1 text
-->P_bsik_ZFBDT2 text
-->P_bsik_ZFBDT3 text
FORM collect_invoice USING pp_lifnr
pp_dmbtr
pp_zfbdt
pp_zbd1t
pp_zbd2t
pp_zbd3t
pp_ztotsal.
doc_month = pp_zfbdt+4(2).
doc_year = pp_zfbdt+0(4).
doc_mth_abs = ( doc_year * 12 ) + doc_month.
mth_result = ( targ_mth_abs - doc_mth_abs ).
logic given by Mr. Ashok Singhvi
doc_days = pp_zfbdt+6(2).
addl_days = ( doc_days - targ_days ).
IF addl_days <= 0.
ADD 1 TO mth_result.
ENDIF.
IF NOT pp_zbd3t IS INITIAL.
MOVE pp_zbd3t TO ext_days.
ELSEIF NOT pp_zbd2t IS INITIAL.
MOVE pp_zbd2t TO ext_days.
ELSEIF NOT pp_zbd1t IS INITIAL.
MOVE pp_zbd1t TO ext_days.
ELSE.
CLEAR ext_days.
ENDIF.
CHECK with Andrew whether this is working or not
if extended payment terms exist, subtract no of mths from mth_result
IF NOT ext_days IS INITIAL.
CASE ext_days.
WHEN 30.
SUBTRACT 1 FROM mth_result.
WHEN 60.
SUBTRACT 2 FROM mth_result.
WHEN 90.
SUBTRACT 3 FROM mth_result.
WHEN 120.
SUBTRACT 4 FROM mth_result.
ENDCASE.
ENDIF.
change to key date
IF pp_dmbtr > 0.
IF p_future = 'X'. " 0001
IF mth_result <= 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ELSE.
IF mth_result < 0.
itab-zfuture = pp_dmbtr.
t_item-days = 'FUT'.
ELSEIF mth_result = 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ENDIF. " 0001
itab-crbal = 0.
itab-total = pp_dmbtr.
ELSE.
IF p_future = 'X'. " 0001
IF mth_result <= 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ELSE.
IF mth_result < 0.
itab-zfuture = pp_dmbtr.
t_item-days = 'FUT'.
ELSEIF mth_result = 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ENDIF. " 0001
itab-total = pp_dmbtr.
itab-crbal = 0.
ENDIF.
itab-lifnr = pp_lifnr.
itab-totsal = pp_ztotsal.
COLLECT itab.
CLEAR itab.
ENDFORM. " COLLECT_INVOICE
*& Form ADD_SORT_FIELD
text
--> p1 text
<-- p2 text
FORM add_sort_field.
DATA: l_amount(9) TYPE n.
IF p_future = 'X'.
LOOP AT itab.
l_amount = 999999999.
IF itab-365days > 0.
l_amount = l_amount - itab-365days.
CONCATENATE 'A' l_amount INTO itab-psort.
ELSEIF itab-180days > 0.
l_amount = l_amount - itab-180days.
CONCATENATE 'B' l_amount INTO itab-psort.
ELSEIF itab-120days > 0.
l_amount = l_amount - itab-120days.
CONCATENATE 'C' l_amount INTO itab-psort.
ELSEIF itab-99days > 0.
l_amount = l_amount - itab-99days.
CONCATENATE 'D' l_amount INTO itab-psort.
ELSEIF itab-90days > 0.
l_amount = l_amount - itab-90days.
CONCATENATE 'E' l_amount INTO itab-psort.
ELSEIF itab-60days > 0.
l_amount = l_amount - itab-60days.
CONCATENATE 'F' l_amount INTO itab-psort.
ELSEIF itab-30days > 0.
l_amount = l_amount - itab-30days.
CONCATENATE 'G' l_amount INTO itab-psort.
ELSEIF itab-zcurrent > 0.
l_amount = l_amount - itab-zcurrent.
CONCATENATE 'H' l_amount INTO itab-psort.
ELSEif itab-zfuture > 0.
L_AMOUNT = L_AMOUNT - ITAB-zfuture.
CONCATENATE 'F' L_AMOUNT INTO ITAB-PSORT.
ELSE.
l_amount = ABS( itab-total ).
CONCATENATE 'I' l_amount INTO itab-psort.
ENDIF.
MODIFY itab.
ENDLOOP.
ELSE.
LOOP AT itab.
l_amount = 999999999.
IF itab-365days > 0.
l_amount = l_amount - itab-365days.
CONCATENATE 'A' l_amount INTO itab-psort.
ELSEIF itab-180days > 0.
l_amount = l_amount - itab-180days.
CONCATENATE 'B' l_amount INTO itab-psort.
ELSEIF itab-120days > 0.
l_amount = l_amount - itab-120days.
CONCATENATE 'C' l_amount INTO itab-psort.
ELSEIF itab-99days > 0.
l_amount = l_amount - itab-99days.
CONCATENATE 'D' l_amount INTO itab-psort.
ELSEIF itab-90days > 0.
l_amount = l_amount - itab-90days.
CONCATENATE 'E' l_amount INTO itab-psort.
ELSEIF itab-60days > 0.
l_amount = l_amount - itab-60days.
CONCATENATE 'F' l_amount INTO itab-psort.
ELSEIF itab-30days > 0.
l_amount = l_amount - itab-30days.
CONCATENATE 'G' l_amount INTO itab-psort.
ELSEIF itab-zcurrent > 0.
l_amount = l_amount - itab-zcurrent.
CONCATENATE 'H' l_amount INTO itab-psort.
ELSEIF itab-zfuture > 0.
l_amount = l_amount - itab-zfuture.
CONCATENATE 'I' l_amount INTO itab-psort.
ELSE.
l_amount = ABS( itab-total ).
CONCATENATE 'J' l_amount INTO itab-psort.
ENDIF.
MODIFY itab.
ENDLOOP.
ENDIF.
ENDFORM. " ADD_SORT_FIELD
*& Form WRITE_REPORT
text
--> p1 text
<-- p2 text
FORM write_report.
PERFORM build_fieldcat.
PERFORM build_sortcat.
PERFORM build_eventcat.
PERFORM build_layout.
PERFORM start_list_viewer.
ENDFORM. " WRITE_REPORT
*& Form BUILD_FIELDCAT
text
--> p1 text
<-- p2 text
FORM build_fieldcat.
lifnr
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'lfa1'.
fieldcat_ln-fieldname = 'LIFNR'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
APPEND fieldcat_ln TO fieldcat.
Name1
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'lfa1'.
fieldcat_ln-fieldname = 'NAME1'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-seltext_l = 'Name'.
APPEND fieldcat_ln TO fieldcat.
City Details
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'lfa1'.
fieldcat_ln-fieldname = 'ORT01'.
fieldcat_ln-seltext_l = 'City'.
fieldcat_ln-col_pos = col_pos.
APPEND fieldcat_ln TO fieldcat.
Credit Limit
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNKK'.
fieldcat_ln-fieldname = 'KLIMK'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-emphasize = 'C41'.
APPEND fieldcat_ln TO fieldcat.
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = 'CRBAL'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-seltext_l = 'Cr. Bal.'.
fieldcat_ln-seltext_m = 'Cr. Bal.'.
fieldcat_ln-seltext_s = 'Cr. Bal.'.
APPEND fieldcat_ln TO fieldcat.
Total Amount
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-fieldname = 'TOTAL'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-seltext_l = 'Out.St.Amt.'.
fieldcat_ln-seltext_m = 'Out.St.Amt.'.
fieldcat_ln-seltext_s = 'Out.St.Amt.'.
fieldcat_ln-ref_tabname = 'zbsik'.
fieldcat_ln-ref_fieldname = 'ZDMBTR'.
APPEND fieldcat_ln TO fieldcat.
IF p_future NE 'X'.
Future
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = 'ZFUTURE'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = 'Future Due'.
fieldcat_ln-seltext_m = 'Future Due'.
fieldcat_ln-seltext_s = 'Future Due'.
APPEND fieldcat_ln TO fieldcat.
ENDIF.
Current
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = 'ZCURRENT'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = 'Normal Due'.
fieldcat_ln-seltext_m = 'Normal Due'.
fieldcat_ln-seltext_s = 'Normal Due'.
APPEND fieldcat_ln TO fieldcat.
30 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '30DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '0-30 Days'.
fieldcat_ln-seltext_m = '0-30 Days'.
fieldcat_ln-seltext_s = '0-30 Days'.
APPEND fieldcat_ln TO fieldcat.
60 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '60DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '31-60 Days'.
fieldcat_ln-seltext_m = '31-60 Days'.
fieldcat_ln-seltext_s = '31-60 Days'.
APPEND fieldcat_ln TO fieldcat.
90 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '90DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '61-90 Days'.
fieldcat_ln-seltext_m = '61-90 Days'.
fieldcat_ln-seltext_s = '61-90 Days'.
APPEND fieldcat_ln TO fieldcat.
99 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '99DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '91-120 Days'.
fieldcat_ln-seltext_m = '91-120 Days'.
fieldcat_ln-seltext_s = '91-120 Days'.
APPEND fieldcat_ln TO fieldcat.
*120Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '120DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '121-180 Days'.
fieldcat_ln-seltext_m = '121-180 Days'.
fieldcat_ln-seltext_s = '121-180 Days'.
APPEND fieldcat_ln TO fieldcat.
*180 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '180DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '181-365 Days'.
fieldcat_ln-seltext_m = '181-365 Days'.
fieldcat_ln-seltext_s = '181-365 Days'.
APPEND fieldcat_ln TO fieldcat.
*365 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '365DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '>365 Days'.
fieldcat_ln-seltext_m = '>365 Days'.
fieldcat_ln-seltext_s = '>365 Days'.
APPEND fieldcat_ln TO fieldcat.
Last Payment Date
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNKK'.
fieldcat_ln-fieldname = 'CASHD'.
fieldcat_ln-col_pos = col_pos.
APPEND fieldcat_ln TO fieldcat.
Street Name
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'lfa1'.
FIELDCAT_LN-FIELDNAME = 'STRAS'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT.
Telephone
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'lfa1'.
FIELDCAT_LN-FIELDNAME = 'TELF1'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT.
Credit Group
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'KNKK'.
FIELDCAT_LN-FIELDNAME = 'GRUPP'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT.
*Sales District
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNVV'.
fieldcat_ln-fieldname = 'BZIRK'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-seltext_l = 'S_Distt'.
fieldcat_ln-seltext_m = 'S_Distt'.
fieldcat_ln-seltext_s = 'S_Distt'.
APPEND fieldcat_ln TO fieldcat.
Sales Office
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNVV'.
fieldcat_ln-fieldname = 'VKBUR'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-seltext_l = 'S_Off'.
fieldcat_ln-seltext_m = 'S_Off'.
fieldcat_ln-seltext_s = 'S_Off'.
APPEND fieldcat_ln TO fieldcat.
Cust Creat Date
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'lfa1'.
FIELDCAT_LN-FIELDNAME = 'ERDAT'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT. -
How get and edit xml code of BI Publisher Report
Hi to all,
I need to do some costumization to one BI Publisher report. Investigating I found a solution to do my costumization. However this requieres edit the xml code. Can you please let me know how can I get and edit this code?
Thanks in advance
regards
Danielobiee / ebs .... ?
Investigating I found a solution to do my costumization. However this requieres edit the xml code.
no need edit seeded code (it's for SR)
your steps:
- get seeded code
- edit
- create custom report
Can you please let me know how can I get and edit this code?
for ebs you can look xml publisher responsibility, find by code -
Oracle Reports 10g Error Codes Details
Hi,
I would like to know which documentation will give me the details for the description and category (Warning/Fatal Error/User Error) for all the possible error codes that can be reported by Oracle 10g while the excution/scheduling of reports.
The error code reported by Oracle 10g usually start with "REP-<error code>". I would like to have a list of all these REP codes and their details like description,category,severity,action to be taken etc.
Pls help.
regards,
SantaHello,
All the error messages are documented in the Reports Builder online help.
Regards -
Transaction code for SAP query reports
Hi All,
I am trying to create transaction code for sap query report but couldn't go further.
1) Created User group in SQ03
2) Created infoset in SQ03 and assigned that to the user group
3) Created query in SQ01 using the infoset.
I executed the report in SQ01 and it is working fine.
Now I try to create a transaction code in SE93 using the steps mentioned in the following link:
Assign transaction code to SAP Query (created via SQ01)
But when try to execute the report using the transaction code, it is giving error message 'User group xxxxxx is not yet created'
Could any one advice me if I miss something? Or please help me to create this transaction code and transport to production?
Thanks in advanceHI,
based on the thread you've already mentioned:
In SE93, Create a Paramter Transaction
-> Transaction = Start_report
-> In default values, give the below details:
D_SREPOVARI-REPORTTYPE = AQ
D_SREPOVARI-EXTDREPORT = Name of the Query
D_SREPOVARI-REPORT = User Group
So check if the user group is typed correct in SE93 and check also if the user group exits in the system where you are trying to run the transaction.
best regards, Christian -
I need a code to run a report from a forms on 10G...
Hi!! I´m migrating from 6i to 10G and i cant run a report... can someone send me a sample code to run a report from a form in 10G??
Thanks!!
Regards!iam using Javabean in oracle 10g forms to tun the report....
First create a block with a name control and add an bean to it with a name
userid_bean.click the proerty of the bean and changes its width and height
so that u cannot see it when u run the particular form.
now use the below code where u are coding to run the report.
Declare
rep_url varchar2(2000);
begin
rep_url := '/reports/rwservlet?report=filepath\rep1.RDF' ||
'&desformat=htmlcss&destype=cache&userid=sample/sample@oracle' || '¶mform=yes';
-- Write Log messages to the Forms JInitiator console.The Next line must
-- be disabled before running this code in any production environment.
set_custom_property('control.userid_bean',1,'ADD_USERID',
get_application_property(username)||'/'||
get_application_property(password)||'@'||
get_application_property(connect_string));
-- writing the cookie
set_custom_property('control.userid_bean',1,'WRITE_USERID_COOKIE','10g');
web.show_document(rep_url,'_blank');
end; -
How to write the code to send the report output to the local file.
dear all,
how to write the code to send the report output to the local file.
Thanks & Regards,
Jyothi.Hi,
Try this , it will display report and download the file as well. Just vhange the path and execute
TYPE-POOLS : SLIS.
DATA : IT_SCARR TYPE TABLE OF SCARR,
IT_FCAT TYPE SLIS_T_FIELDCAT_ALV.
SELECT *
FROM SCARR
INTO TABLE IT_SCARR.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
* I_PROGRAM_NAME =
* I_INTERNAL_TABNAME =
I_STRUCTURE_NAME = 'SCARR'
* I_CLIENT_NEVER_DISPLAY = 'X'
* I_INCLNAME =
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
CHANGING
CT_FIELDCAT = IT_FCAT
* EXCEPTIONS
* INCONSISTENT_INTERFACE = 1
* PROGRAM_ERROR = 2
* OTHERS = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE = ' '
* I_CALLBACK_PROGRAM = ' '
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* I_STRUCTURE_NAME =
* IS_LAYOUT =
IT_FIELDCAT = IT_FCAT
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* IR_SALV_LIST_ADAPTER =
* IT_EXCEPT_QINFO =
* I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_SCARR
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
EXPORTING
* BIN_FILESIZE =
FILENAME = 'C:\Documents and Settings\sap\Desktop\Hi.xls' " Change path
* FILETYPE = 'ASC'
* APPEND = SPACE
* WRITE_FIELD_SEPARATOR = SPACE
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = SPACE
* WRITE_LF = 'X'
* COL_SELECT = SPACE
* COL_SELECT_MASK = SPACE
* DAT_MODE = SPACE
* CONFIRM_OVERWRITE = SPACE
* NO_AUTH_CHECK = SPACE
* CODEPAGE = SPACE
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = SPACE
* TRUNC_TRAILING_BLANKS_EOL = 'X'
* IMPORTING
* FILELENGTH =
CHANGING
DATA_TAB = IT_SCARR
* EXCEPTIONS
* FILE_WRITE_ERROR = 1
* NO_BATCH = 2
* GUI_REFUSE_FILETRANSFER = 3
* INVALID_TYPE = 4
* NO_AUTHORITY = 5
* UNKNOWN_ERROR = 6
* HEADER_NOT_ALLOWED = 7
* SEPARATOR_NOT_ALLOWED = 8
* FILESIZE_NOT_ALLOWED = 9
* HEADER_TOO_LONG = 10
* DP_ERROR_CREATE = 11
* DP_ERROR_SEND = 12
* DP_ERROR_WRITE = 13
* UNKNOWN_DP_ERROR = 14
* ACCESS_DENIED = 15
* DP_OUT_OF_MEMORY = 16
* DISK_FULL = 17
* DP_TIMEOUT = 18
* FILE_NOT_FOUND = 19
* DATAPROVIDER_EXCEPTION = 20
* CONTROL_FLUSH_ERROR = 21
* NOT_SUPPORTED_BY_GUI = 22
* ERROR_NO_GUI = 23
* others = 24
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>EXECUTE
EXPORTING
DOCUMENT = 'C:\Documents and Settings\sap\Desktop\Hi.xls' "Change path
* APPLICATION =
* PARAMETER =
* DEFAULT_DIRECTORY =
* MAXIMIZED =
* MINIMIZED =
* SYNCHRONOUS =
* OPERATION = 'OPEN'
* EXCEPTIONS
* CNTL_ERROR = 1
* ERROR_NO_GUI = 2
* BAD_PARAMETER = 3
* FILE_NOT_FOUND = 4
* PATH_NOT_FOUND = 5
* FILE_EXTENSION_UNKNOWN = 6
* ERROR_EXECUTE_FAILED = 7
* SYNCHRONOUS_FAILED = 8
* NOT_SUPPORTED_BY_GUI = 9
* others = 10
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
try to create an installer in Labview 8.6. The build fail and I got this message.
CDK_CreateNewWizard_Invoke.vi.ProxyCaller >> CDK_CreateNewWizard_Invoke.vi >> CDK_InstallerConfiguration_Editor.vi
>> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_Build.vi >> NI_MDF.lvlib:MDFBuildDist_Build.vi
Loading product deployment information
Loading product deployment information
Loading product deployment information
Loading product deployment information
Adding files to installer
Done adding files
Preparing to build deployment
Copying products from distributions
Copying distribution 'NI LabVIEW 8.6.1 Datalogging and Supervisory Control Module' from:
D:\software\application\LabView\NI.LABVIEW\NI-Labview 8.6.1 DSC Module\ to: C:\Documents and Settings\Lidaoling\桌面
\Builds\generate waveform\My Installer\
Building deployment
Copying setup files
Setting merged database information
Setting product information
Setting developer part information
Starting final build
Validating...
Copying files...
Updating files...
Creating merged database...
*** Error: Windows SDK function returned an error. (Error code -12)
*** End Error Report
Done building deploymentSolution
-
Transaction code creation for a report group
Hi all,
I created a transaction code ZF17 for a report group FI02 with the following parametrs.
Transaction: START_REPORT
checked the skip initial screen check box.
D_SREPOVARI-REPORTTYPE = RW
D_SREPOVARI-REPORT = FI02
When i tried to run the T-code ZF17, it gives me
a message : PROGRAM FI02 doesn't exist
Any ideas why this message comes up?
Thanks,
Sobhan.I would think that its looking for a program name in the D_SREPOVARI-REPORT field, FI02 is not a program name.
Regards,
Rich Heilman -
Custom.pll library?
Hi guys,
How can I use custom.pll library to checking those newly add records on screen? Here is the example:
1) There are 2 records on screen from interface in Purchase Order Form
2) User manual add 1 record in Purchase Order Form
3) When use save the record, I want to do some checking for those record added by user manually (should be no. 3 lines in this case)
How can I perform this checking in custom.pll library?
Best Regards,
AmyGeneral EBS Discussion
in above forum are the EBS gurus, which maybe know faster a solution for your EBS-Forms-Questions -
How to get Transaction code for SAP standard report painter in FI
Hi All -
Please let me know, How to get the transaction code for Standard SAP report painter / report writer in FI module.
These report painters are created thru GR51...
Thanks,
KannanPlease refer to [Creating Transaction Code For Report Painter Reports|http://www.google.com/url?sa=t&source=web&ct=res&cd=1&ved=0CAgQFjAA&url=http%3A%2F%2Fdap-consulting.com%2Fyahoo_site_admin%2Fassets%2Fdocs%2FReport_Painter_Reports.47142031.pdf&ei=MiWYS5ilCYeOlAfn4pCGDQ&usg=AFQjCNEZ0YO6vJ97K24MbU_NI5ROTb5vJA&sig2=Ke-svnqddqrz8RMcTuEnaw].
-
Create T.Code for a query (Report looks like VF05)
Hi,
I'm facing a problem right now.. I made a Query with SQVI, then I converted it with SQ01.. It is a report that lookes like VF05 but has the column EAN/UPC Code added on it.
Now I am trying to create a T.code to run this report, using SE93.
So, I called the T.Code ZVF05, and then I tried to Create it, but then I don't know what Start Object I should choose: I first choosed "Program and screen", I gave the field Program value "SAPMS38R" and Screen name "180" as seen in the my Query
, but when trying to test it, I receive the message: "Incorrect program type with Submit"
What would you suggest to make this TCode work?
PS. Please note that I am SD functional consultant, not a ABAPer...
Edited by: Cristiana Vasile on Oct 13, 2008 2:23 PMOk, I have runed the report with the name i wanted: (ZVF05).. Now, what I realised is that I don't really have a selection screen in order to run this report.. What have I been missing here??
Something in SQVI, or maybe in SE93??
I don't realy find the use of runing a report for all the existing data in SAP..a selection screen should be available..
Thank you!
Cristiana
Maybe you are looking for
-
Lumia 620 Following Denim Update
Looking for help with the following issue. Prior to Denim, whenever I made an in car call using bluetooth, the details of the person I was calling would appear on screen (even if Glance was on). Following Denim, whenever I make an outgoing call, the
-
Unable to delete the last request in full load infopackage
Hi All, I have full load infopackage with many requests with green status and thier request genetaed is 0. Because of last failure request ia m aunable to activate dso. i Made last failure request green and triggered. but not successful. i made it r
-
Program translation - Copy field captions etc. from another language
Dear experts, implementing translations for ABAP programs can be very annoying. Is it possible that screen field captions etc. are displayed in English, if no translation for the users logon language can be found. Or is it possible to copy all Englis
-
Freetalk Office Phone & Skype Online Number
When reviewing the product description for the Freetalk Office Phone, it was unclear to me whether or not the phone will work with your Skype Online Number. For example, if someone calls my online number then will the Freetalk Office Phone ring?? A
-
How i do i copy a movie to my ipad?
i have been failing to copy movie on my ipad. please help if know about it..