Making Process Chains for Objects - 3.5 DataSources

Hi. I'm trying to configure all my process chains to load every object in my model.
I need to delete the PSA, only to mantain data for the last week for Master Data and Transactional Data.
The problem is when I make the chain for my Hierarchy, which is in 3.5 version.
I think I can't have my hierarchy in 7.0 version so, the question would be:
Do you suggest to configure the deletion of the PSA in the chain for the hierarchy?
I don't know how to do it because I couldn't find the PSA table for the hierarchy.
Which would be the best way to control the loading of data in 3.5 DataSources using the process chain?
Thanks a lot in advance.
Fede

Hi,
I think I can't have my hierarchy in 7.0 version so, the question would be:
Do you suggest to configure the deletion of the PSA in the chain for the hierarchy?
Yes, you can't have hierarchy DS in BI 7.0 version, Hierarchy is loaded using 3.x DS. I think you can go ahead for PSA request deletion in hierarchy.
I don't know how to do it because I couldn't find the PSA table for the hierarchy.
Which would be the best way to control the loading of data in 3.5 DataSources using the process chain?
Double click on the Data source and from tool bar select the PSA icon in the next popup you will see the name of PSA on top left corner. Or in the PSA request deletion process you can directly use the Infopackage technical name.
Regards,
Durgesh.

Similar Messages

Problem in creating process chains for CO

Hi Friends,
                 I have a CO cube "0OPA_C11" getting data from Three datasources,
those are 0CO_OM_OPA_6(supports delta), 0CO_OM_OPA_1(full only), 0CO_OM_OPA_2(full only), i have already created process chain to this cube using these three datasources, the chain is like this,
1. delete indexes
2.0CO_OM_OPA_6(supports delta
3.0CO_OM_OPA_1(full only),
4.0CO_OM_OPA_1(request overlapping)
5.0CO_OM_OPA_2(full only),
6.0CO_OM_OPA_2(request overlapping)
7.create indexes
        Is it right? here the chain is running, after completion of that, in manage of cube, it is showing only the request for 0CO_OM_OPA_2(full only), the request which were there earlier like Init request and new delta request for .0CO_OM_OPA_6, full request for 0CO_OM_OPA_1 are getting deleted, it is showing the request only for 0CO_OM_OPA_2,
the way how i created the process chain is right or wrong? can anybody give me the solution?
Thanx in Advance
BalajiReddy

Hi Nick,
          Thanx for your reply, everthing is ok what you've asked me to check, i think there is certain scenario to create the process chains for the data targets, which are getting data from multiple datasources, which support delta's as well as full.
          I want that scenario, can you tell me? or can anybody tell me?
The right points are assigned to the right answers.
Thanx in advance
balajireddy

Error in Process chain for CO-PC

Dear ALL
I am facing one problem.I have a process chain for CO-PC cost object controlling.In that after start process i have another process chain Manufacturing order.After this other processes are there.Upto 4th march i have the delta running fine.After that the manufacturing order PC is failing when i open the process chain i find its failing in DTP section.
Now what i did is i run the DTP for manufacturing order actually it consist of ATTRIBUTES AND TEXTS.After finishing i find in manage that the records are transferred but 0 records added and when i find the log its saying
@5C@ 0PRODORDER : Data record 1 ('000001000000 ') : Duplicate data record RSDMD 191
Thanks in Advance

Hi,
Check below these links for more business knowledge about CO-PC.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COPCIS/COPCIS.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6.
Regards,
Praveena.

Process chains for loading data to target is not functioning

Hi SAPians,
Recently, we have upgraded the firmware on IBM P590 with the help of IBM on Saturday i.e. 06/12/2008 (The firmware of P5-590 was SF235_209. It was upgraded to SF240_XXX) and since then the process chains for loading data to targets are not functioning properly. We have stopped all the SAP services, database services & OS services from our end and services have been rebooted after firmware upgrade.
However, the problem with the process chains that load transaction data and hierarchies is solved but the chains that load master data are still not working as scheduled.
We tried to load the master data manually, by running DTP to load data to an object analysis code (attributes) the request remained YELLOW. After refreshing it several times, the request turned into RED. The error message was - PROCESSING TERMINATED (screenshot 1 attached).
To mitigate this we tried deleting the bad request and it prompted with the below message:
"Cannot lock request DTPR_4C37TCZGDUDX1PXL38LVD9CLJ of table ZANLYSIS for deletion (Message no. RSMPC178)" (screenshot 2 attached)
Please advise us how the bad request should be deleted?
Regards,
Soujanya

Hi Sowjanya,
Follow the below procedure to make yellow request to RED:
Use SE37, to execute the function module RSBM_GUI_CHANGE_USTATE
From the next screen, for I_REQUID enter that request ID and execute.
From the next screen, select 'Status Erroneous' radiobutton and continue.
This Function Module, change the status of request from Green / Yellow to RED.
Once it is RED, you can manually delete that request...
Releasing LocK
Gott Transaction Code SM12 and release the lock.
Hope It helps you.
Regardss,
Nagaraju.V

Delta and Full process chain for same master data target.

Hi Friends,
Can I do full update and delta update through process chain for same master data target and from same source ?
Regards
shekar reddy

Hi Sriram,
why you want to load full and delta for same master data object?
you can achieve this but make sure that you select repair full option for full load IP.
you have this option in scheduler in menu bar
Regards,
Venkatesh

Creating a Process chain for hierarchy under 0Cust_Sales: Attrib? Text? too

Hi,
I have a standard hierarchy under 0Cust_Sales which I need to create a process chain for so that this hierarchy will be updated from R3 on a daily basis.
What is normal to do in this case:
Create a
1. Create a process chain to load the Hierarchy under this 0Cust_Sales?
Or,
2. Create a process chain to load the Hierarchy and the Attrib?
Or,
3. Create a process chain to load the Hierarchy, the Attrib and Text?
What is the pros and cons of each choice?
Thanks

Hi,
Sorry for the confusion...yes I mean attributes by master data.
Do you load with master data for 0cust_Sales separately, before loading the Attrib, Text and Hierarchy (in order)?
attribute text and hieracrhy are the master data for 0cust_sales.
You load attributes first and then text and then hierarchy.This is not a rule but for the better control and understanding.
But keep a seperate chain for each along with the same grouping like all the attributes load together in same chain and text load together and hierarchy load together in other chains.
Since attributes change frequently and you need to reload it everyday therefore keep it separate
Hierachy may give you tough time with failures in process chains and will not change frequently so keep it separately in another chain.
You need to use an attribte change run (change run) after any new master data is loaded.
this is done to reallign the new SID'S created for the new master data object with that of cubes where they are used and affect these changes in the aggregates which are built on them.
So better put it after the three chains have run or atleast after the master data chain has finished.
Thanks
Ajeet

Activation Process Chain, Info Objects, Transformations

Hi Experts;
Is there any function or abap program, activates inactive Process Chains, Info Objects and Transformations.
Please Advice
Regards
Bilal

Hello,
Find below some activation programs used in BI.
RSDG_CUBE_ACTIVATE      Activation of InfoCubes
RSDG_DODS_REPAIR      Activation of all ODS Objects with Navigation Attributes
RSDG_ODSO_ACTIVATE      Activation of all ODS Objects
RSDG_IOBJ_ACTIVATE      Activation of all InfoObjects
RSDG_IOBJ_REORG      Repair InfoObjects
RSDG_MPRO_ACTIVATE      Activating Multiproviders
RS_COMSTRU_ACTIVATE_ALL      Activate all inactive Communication Structures
RS_TRANSTRU_ACTIVATE_ALL      Activate Transfer Structure
RSAU_UPDR_REACTIVATE_ALL      Activate Update Rules
RRHI_HIERARCHY_ACTIVATE      Activate Hierarchies
SAP_AGGREGATES_ACTIVATE_FILL      Activating and Filling the Aggregates of an InfoCube
RS_PERS_ACTIVATE      Activating Personalization in Bex(Inactive are highlighted)
Programs for activating process chains and Transformations have not been delivered by SAP.
Regards,
Pratap Sone
Edited by: Pratap Sone on Jul 19, 2010 8:39 AM

PROCESS CHAIN FOR REAL TIME DATA AQUISITION

hi,
how can i create a process chain for dso which is getting data from xi push
i created a deamon which is having both infopackage and reat time dtp
now i want to close the request for 24 hours
i have 10 dso's in this way
how to create process chain for this?

hi,
how can i create a process chain for dso which is getting data from xi push
i created a deamon which is having both infopackage and reat time dtp
now i want to close the request for 24 hours
i have 10 dso's in this way
how to create process chain for this?

Error in Process Chain for Delta pack

Hi All,
Here I am facing error in process chain for delta pack.
Error:
Last delta upload not yet completed. Cancel I
Please send me the solution asap.
Thanks

Hi,
This message means there may be a load triggered by the same infopackage that may be still running or may be still having yellow status. Go to the monitor screen from this IP itself and it will show the paricular request (it will be the latest one). See if that load is active and running. If its active try to find out if load is happening, if its happening you may let it progress. If its not active you need to force the status to red and delete from the target. Once this is done you can retrigger the load. If its a datamart load you may need to reset the data mart status before the triggering the load.
Refer
Last delta update is not yet completed
Last delta update not yet completed-PC Chain Error
Last Delta Not Yet Completed
This is the same issue as yours.
Thanks,
JituK

Process Chain for Consolidation Functions

Hi Team,
We have created a process chain for consolidation function as required by client, but we want the process chain to check the preceding task status and only on successfully completion it should proceed to next task. Is there a standard program or function module which does this, please update.
Also we would like to pass dynamic permanent parameter values for the variants of task.
Thanks in advance.
Kind Regards
Sridhar

Hi Collet,
We have created a process chain as below:
Period Initialization - Data Collection -LDS - Calculation of RE - Validation of RFD - Interunit Elimination -COI.
I have created the Separate variants for each of the above functions with program UCBATCH01.and the process chain is working fine.
But we want the process chain to check the task status before it proceed to next task execution and stop if any error occurs in the task. Also we want the dynamic selection of parameters from Permanent Parameters of Consolidation Monitor.
Kind Regards
sridhar

How to create process chain for 0EMPLOYEE

I want to create process chain for 0EMPLOYEE attribution and text, how to create it and make a schedule for daily loading? Could anyone write steps in my case? Thanks!

Hi,
Follow the following steps:
1. Go to RSPC->create->give name and disc of your chain.
Start Variant Creation
2. Now you will be prompted to give a start variant,create a new variant(click on page icon )
3.Change Selections->date/ time.
4.give date and time for start of the chain.
5.click the check box for periodic job->period values->daily->save->save
Addition of process types
6.Select the process type "Execute Infopackage"
7.select the name of the infopackage which loads attr data to 0EMPLOYEE.
8.Attribute Change run will come automatically( if not then drag it as well and create variant )
9.select the name of the infopackage which loads text data to 0EMPLOYEE.
10.Attribute change run wil again follow.
(connect the process types which are not connected,by right clicking the process types )
                             start
                       IP A     IP T
                      attr          attr
A = attribute
T = Text
Please Reward points if useful
Manish

How to create process chains for Master Data?

I need information on " how we can create process Chains for Master Data"

Hi Sachin,
http://help.sap.com/saphelp_bw33/helpdata/en/ad/6b023b6069d22ee10000000a11402f/frameset.htm
and also Modelling aspects in process chains (ppt)
https://websmp109.sap-ag.de/~sapidb/011000358700002337702003
Hope this helps.
Srini

How to Create Process Chain for Remote Cube.

Hi,
I created Remote info cube, data from ECC, loaded Successfully, I want to create Process Chain for Reomte Cube, Please Help me.
Thanks,
Nandish Gowda

Hi Nandish,
After initialization, th next delta will come as per your delta nature, if it is 0calday: Then your next delta will come tomorrow only.
If you are able to 7 records in RSA3, why not in PSA( Why it's only 5 records). Analyze this closely.
Sometimes, RSA3 exactly doesn't match with PSA because, RSA3 works on update mode F.
Regards,
Suman

HOW TO CREATE PROCESS CHAIN FOR PSA ARCHIVING

SDN EXPERTS,
i like to create process chain for archiving. but i dont see any event for archiving when i go to create a process chain for PSA archiving. please let me know.
thanks

Hi,
In the below document on the 14th page it says it is not possible to archive the master data & PSA.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f47fec9f-0501-0010-ce84-8a7231715ae6
As per my understanding..
But one thing you can do is use another ODS and load the same data that you're loading to something else and try to archive that data(Only if you have transformations in the current CUBE/ODS).
Correct me if i was wrong and eloborate your requirement.
Regards, Siva

How to create Process chain for Aggregate for Master data

Hello friends,
I created Aggregates on Navigational Attributes.
Now they are working fine, but i need to know that how shall i create the Roll up for Aggregates on Navigational Attributes.
The point is the master data changes frequently a lot of time for e.g. for 0customer etc.....
So if any one can send me the step by step documents so as to know how to roll up the Aggregates for Navigation attributes or for aggregates created on Master data....
How to create process chains for the same ?????????
Because if master data changes, then rolling up the aggregates straight forward will not help.
So we need to write a process chain so that it deactivates the aggregate and reactivate again and fill up again..........
If i mis interpreted something please rectify it.......
Please advise

Hello,
the changerun that you have to schedule in order to activate the master data will adjust the aggregates automatically. There is no need to deactivate them after master data loads.
Best regards,
Ralf

Making Process Chains for Objects - 3.5 DataSources

Similar Messages

Maybe you are looking for