Making q0167-iminc field blank of IT0167 infotype

Hi,
I got a requirement to make the field (q0167-iminc) of infotype IT0167 blank on certain conditions (if the employee has domestic partner who is tax in-dependednt, which is in IT0021).
Pls get back to me how we can do it.
Some how i got BAdi PBEN0008. I need hw we can put this logic to make the filed blank.
Thanks,
Shreeni

Hi Richard,
Thanks for the reply.
Yeah I agree those are screen fields, thats wt how should we make the screen field blank.
While creating IT0167, it should check iin IT0021 if employee has domestic partner and tax status check box is checked then in IT067 -iminc field should become blank,
I just want to this can be handle thru user exit/BADi or in other way to control this screen field.
I do not Dynamic actions, can we do it thru that?? i am not sure..
Please revers ASAP.
Thanks,
Shree

Similar Messages

Making Employment status field editable in Actions infotype

Hi All,
Can we make the Employment status or Customer specific status editable in Actions Infotype 0000?
I tried doing that in 'Change Screen modification' in IMG, but it isn't working.
Please provide your inputs.
Thanks!

Hi, 
It is not possile to do it.
Each action is assigned the three status indicators STAT1 (customer defined), STAT2 (employment), STAT3 (special payment) in the customizing system.
When a personnel action record is created, the system automatically fills the Customer defined, Employment and Special payment fields if the action affects the employee's status.
The first record of the Actions infotype is assigned the status specified in the customizing system. All other records
have the same status indicator as the new personnel action if this is not BLANK in the customizing system.
have the same status indicator as the previous record if this is BLANK in the customizing system.
This applies to all three indicators.
Can you let us know the business need or requirement to do it??
Good luck 
Thanks,
Amosha
 "Known is a drop & unknown is an OCEAN!"

Making fields blank

I want to make a NAME type field blank when a condition of my rule hides the field.

Howdy all,
We've found an undocumented behaviour change between 2008.1 and 9 that caused us major problems after our upgrade where when you try and set a Person field to blank, unless it has 'edit' writes at the moment, it'll throw an error and essentially lock the form up (that is, no actions can be taken - done/update/approve/reject). We've got a case open for it.
We skipped 2008.3 unfortunately so I'm not sure if it's the same case, but you may need to make it editable for the conditional rule to run... Interestingly, you can still set other field types as blank, it's only Person that it affects (and we have a case open for it).
Thanks,
Ant

Making Numeric field blank

Hi Experts ,
i have a requirement to make the numeric field "blank" in some rows of internal table .
its about vendor
whenever any vendor will repeat , i need to display 3 numeric fields "blank" , in that particular row .
please help me on this issue .
thanks in advance .
vijeta

Hi,
One very important thing we cannot make numeric field as blank is can be made initial i.e. 0.
So we have to make the field as character then we can make it blank by initializing it.
thanx.

How to enter values in the fields of standard SAP Infotype e.g. IT0024

Hi,
How to enter values in the fields of standard SAP Infotype?
e.g. I want to enter values in infotype IT0024(Qualifications) in the field AUSPR(Profincy):-
1-Level 1
2-Level 2
3-Level 3
4-Level 4
5-Level 5
Thanks,
Ameet

Hi Divya,
I checked with the screen and report which is mentioned by you. But I want to modify/make changes that should appear in the screen when you view details for a particualar employee in Qualifications(IT0024).
Please refer the screen 2000 of module pool MP002400 in SE80. In that screen I want to make change as listbox with key.
Can it be achieved in the same way as mentioned by you before by making standard SAP report as Z and then modify using layout editor?
Please help me out. I think I am almost there.
Thanks,
Ameet

Make Category id field blank in Describe requirement

Hi all,
When ever we are going in Describe requirement tab its giving us the last used category id in the category id field. I know its getting filled in the global_data_filled.
We want to make this field blank when we go in this tab. Also I can not do any standard code change neither in template.
Is there any BADI by means of which I can achieve this?
any help will be rewarded.
Thanks
Smita

Hello,
There is no badi for this and the product category is a very determining field for the SC. Making it blank with development will cause many bugs and unwanted side effect.
A suggestion is to create a dummy category named "?", set it at default category in user attributes and implement the badi bbp_doc_check_badi to prevent a user ordering a SC with this dummy category.
Rgds,
Pierre

Suppress embedded field blank lines in Crystal Reports XI is not working

Hi,
We have a text box in a Crytal Reports XI report which has address information in it as follows:
These are individual fields from the database. We check the "suppress embedded field blank lines" option for the text box and preview it in the designer and the suppression works as expected in that when the unit field is blank the whole address line isn't suppressed. However when we run this report using the Report Viewer control in a VB.NET 2005 application the whole address line is suppressed when the unit field is blank.
This appears to be a bug in the suppression logic when the Report Viewer is used to view a report. While yes we can embed a formula into the address line this adds extra maintenance and confusion which is not necessary as it works as expected in the report designer.
I have seen others which are having a similiar issue and the only suggestions are to create your own suppression using formulas, etc. which is only a bandaid and is not the best solution as the suppression works as stated in the designer but not in the viewer embedded in an application. Please indicate if this is a known bug and if this issue has been addressed and fixed in a new merge module.
We are running Crystal XI 11.5.0.313 for the report designer and have deployed the needed dlls to run the reports with our application using the CrystalReports11_5_NET_2005.msm merge module.
Thanks in advance for any assistance in resolving this issue!

Hello,
Moved to .NET SDK forum.
Upgrade to XI R2 SP 6, you are using the original release:
https://smpdl.sap-ag.de/~sapidp/012002523100011802732008E/crxir2_sp4_full_build.exe
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
And the distribution files are for Visual Studio version of Cr, not R2 build.
https://smpdl.sap-ag.de/~sapidp/012002523100013451312010E/crxir2_fp64_server_ins.zip
Or
https://smpdl.sap-ag.de/~sapidp/012002523100013451332010E/crxir2_fp64_net_mm.zip
Don

WBS element field blank in MB51 report.

Dear Experts,
I m using ECC 6.00 EHP4, My problem is we issue the project material with movement type 221 Q but in MB51 report if I want to get the output with WBS element with Movement type 221 q data is not showing if I give only movment type 221 Q and WBS field blank than in output screen WBS fileld shown blank please clear me where is the problem..
Neeru

Anyone please...
Neeru Dimri

Making task list field mandatory in creation of maintenance plan?

Dear All,
I need your help in configuration of Making task list field mandatory in creation of maintenance plan. I checked with sceen variant config but that also not giving me any option to make the field mandatory.
Is there any note or user exit for it?
Regards,
Kaushal Rai

Dear,
Pls check the exit IPRM0004:Maintenance plan / item: Customer check for time "SAVE".
Regards
Sunil

How to create the sub type field in hr abap infotype

hi ,
how to create the sub type field in hr abap infotype.
regards,
venkat.

Try like this also
creating of infotype please follow these steps ...
Step 1: Create Infotypes
i. Goto Transaction PM01 To create Infotypes:
ii. Enter the Infotype Number and say create all.
iii. The following message would display:
i. PSnnnn Does not exist. How do you want to proceed?
iv. Click
v. A maintain Structure screen appears.
Fill in the short text description and the PS structure of the Infotype.
Since the fields Personnel No, Employee Begin Date, End Date, Sequential Number,Date of Last Change, Name of user who changed the object are available in the PAKEY and PSHD1 structure, define the PSnnnn structure with only the fields you required.
vi. Once the PS Structure is created, save and activate the structure.
vii. In the initial screen of PM01, now click on .
Create a new entry for the infotype.
Fill in the values as mentioned below and save.
Infotype Characteristics:
Infotype Name of the infotype_ Short Text: __Short Description________
*General Attributes :
Time constraint = 1
Check Subtype Obligatory
Display and Selection:
Select w/ start = 3 Valid record for entered data
Select w/ end = 5 Records with valid dates within the period entered
Select w/o date = 6 Read all records
Screen header = 02 Header ID
Create w/o end = 1 Default value is 31.12.9999
Technical Data:
Single screen = 2000
List screen = 3000; List Entry Checked.
viii. In the initial screen of PM01, now click on .
Choose the infotype entry in the list.
Fill in the values as mentioned below and save.
Technical Attributes:
In tab section,
The following attribute values are given:
Applicant DB Tab = PAnnnn Infotype Name
Subtype field = SUBTY
Subtype table = T591A
Subty.text tab. = T591S
Time cnstr.tab. = T591A
Prim. /Sec. = I Infotype
Period/key date = I Interval
and .
ix. Infotype Screen Modification:
Edit Screen 2000 from PM01 for the Infotype.
ABAP Editor for the Infotype Program MPnnnn00 will be displayed.
Click . Flow Logic will be displayed. There string coding of your own logic.
Regards
Pavan

Problem with adding output field in Bank Details(Infotype 0009)

Hi All,
I hav a criteria like, when i select a value for a field corresponding value should be displayed in input/output field just beside the selected field.
To make you understand the criteria more clearly.In infotype 0009 we hav Bank key.When we select a bank key corresponding Bank name is displayed just beside Bank key field.How to achieve that functionality.
Can anyone help please. Its urgent...
Thanks a lot...
Sandeep.

To make my question more clear.I have created a new field in bank details infotype.Similar to the field Bank key in 0009 Infotype.As soon as a select the Bank no through F4 functionality i want the Bank no no to be selected and at the same time i want Bank name to be displayed just beside this field.
In short with 1 selection i want both Bank no n Bank name to be selected.
If i hav ti write the code where should i write the code.I hav also created a structure .I presume i need to write a logic for this requirement.But i dont know where to write the logic.

Is it possible to set up a Paragraph Style leaving the Font Style field blank?

We often have to import text into InDesign from Word docs. We place the docs (Command-D, rather than copying and pasting) in order to preserve italics, bold text, etc. As it is now, we have to select all the text and set each element separately - leaving the Font Style field blank - in the Character Palette.
It would save a lot of time, if we could set up a Paragraph Style without specifying the Font Style, (leaving it blank), which overrides the formatting we are trying to preserve. Is this possible?

The answer is "kind of". You can create the Paragraph Style you want to apply and select the paragraphs you want to apply it to - then right-click on the Paragraph Style and choose 'Apply "Body". Clear Character Styles.'
It is possible to do this as a Character Style if you click outside of a text area and create a new style. I do it all of the time as I import lots of Word documents to write to ePub (you have to define all of the styles to ensure the document looks right). Since the documents come in with small caps, bold, italics, different font sizes but the same font throughout.
So I have a style based on None with blank Font Size and Font Style which I apply to the whole document. If there is anything in these boxes you can just erase it by backspacing over the text.

Requirement of keeping the Path field BLANK of HTTP_AAE Channel in NW PO 7.31

Hi ,
We are in a phase of migrating Interfaces from PI 7.1 to PO 7.31(Java Only).
For one of the Interface in PI 7.1 there is a RFC Destination for vendor communication through HTTPS connectivity :
Target-Host: IP Address
Post: value
Path Prefix: Blank
During migration requirement is to keep the Path field BLANK of the Communication Channel,however since PO has mandatory path field a "/" is been provided, because of which data post fails.
PI: https://IP:9443
PO: https://IP:9443/ (Since Path Prefix is mandatory)
As per my understanding The data is supposed to be posted directly to the IP (https://IP:9443) however it is getting posted to (https://IP:9443/) where the service is not available. For reference have attached relevant screenshots.
Is there any way to provide Blank value,omit the Path Field of HTTP_AAE Receiver adapter. Need ardent support and suggestions
regarding this.

Komal,
I tried the regular expression on my system which is PI 7.30 SP 8 Patch Level 45. And it worked for me.
I have used a simple check for alphabets.
Regards
Abhishek

Making PAN Number Field MANDATORY while creating a Vendor

Dear Experts,
I want to create a Vendor Master with PAN Number Field Mandatory.
Is there any input for making PAN Number Field Mandatory at the time of creating a vendor.
Regards - Manjunath

Hi Trivedi,
I tried the user exit. But it is pulling the values.
Please find the coding here
IF j_1imocust-j_1ipanno = ' '.
MESSAGE e007(zmsg).
ENDIF.
We are not abe get the PAN vanue in j_1ipanno field.
Looking for your help .
Pleas guide.

Making PAN Number Field MANDATORY in Vendor Master while CREATING VENDOR

Dear Experts,
I want to create a Vendor Master with PAN Number Field Mandatory.
Is there any input for making PAN Number Field Mandatory at the time of creating a vendor.
Regards - Manjunath

Please post in the right forum >

Making q0167-iminc field blank of IT0167 infotype

Similar Messages

Maybe you are looking for