Making segment field mandatory in Profit Center Master Data

Hi,
We are using SAP version ECC 6. While creating a profit center using KE51, we would like to make the 'Segment' field mandatory. Can anyone tell me how can this be done? Thanks.
Regards,
Sangeeta

Hi,
There seems to be no standard setting which makes this mandatory.  You may need to take the help of an ABAPer to create a field exit.
Cheers.

Similar Messages

  • Making segment field mandatory in Profit Center master

    Hi,
    We are using SAP version ECC 6. While creating a profit center using KE51, we would like to make the 'Segment' field mandatory. Can anyone tell me how can this be done? Thanks.
    Regards,
    Sangeeta

    Hi,
    I tried using SHD0 for tcode KE51, but I got the following error message:
    Variants are possible only for dialog transactions.Message no. MS417
    DiagnosisYou cannot create variants for variant or parameter transactions.
    Procedure
    Variant transaction:   Adjust the variant
    Parameter transaction: Adjust the parameter(s)
    Kindly advise.
    Regards,
    Sangeeta

  • Segment field mandatory in Profit Center Master

    Hi guys,
    Can anyone suggest, where can we make Segment field mandatory in the Profit center master data?

    Can you tell me how to make Segment field optional in Profit Centre  field because onces we put segment value in that,  after that if we want to change that system not allowing.
    Regards,
    Kaushal Shah
    +91 9426600705

  • How to make the Profit Center Field Mandatory in Cost center Master Data

    Dear All,
    Please let me know how to make the Profit Center Field mandatory in Cost Center Master Data as well as my Internal Order Master Data?
    Thanks in advance!
    Regards,
    Rajeswari Shankar.

    Hi Rajeswari,
    You can modify message number KS096 to "Error" via OBA5. Thus, the users would no be able to save a cost center without entering a profit center. (Depending on your release you can make KS096 modifiable by implementing note 486781.) 
    Concerning the internal orders (transaction KO01), you can run KOT2 and set Profit center field as required entry in "change field selection" section.
    Regards,
    Greta

  • Segment not activate in profit center master data

    Dear all,
    I activated all the profit centers using KEOA2, but the segment field in profit center master data is still greyed out ? is there any process to activate the segment as well? Your input will be appreciated.

    SPRO>Financial Accounting(new)>GL Accounting (New)>Preparation for productive start>Migration of existing SAP Data>Additional Activities>Make settings for segment and segment derivation.
    Maintain Segment.
    Indicator is set('X')
    You can edit the segment in the profit center master data before New
    General Ledger Accounting is activated.

  • Segment Field missing in Profit Center

    Hello gurus,
    We have activated New GL feature in our system and I created segments.
    However I am unable to find the segment field in my profit center master data setting.
    Are there any steps which I have to configure to get the field for segment in my profit center master data.
    Kishen

    It turns out that we had not activated it and hence segment was not showing up in Profit center.

  • Segment field is not shown in profit center master data

    Hi,
      When i activated New GL ,but the segment field is not shown in profit center master data. How can i make the field shown ?
    Thanks.

    After activating the New GL have you defined the segment? First define the segment under Enterprise Structure and in Fin.Acctg Global settings(New)-Legers-Display scenarios for General Ledger Accounting, you need to create new entries for FIN_PCA & FIN_SEG.
    Hope this helps you.

  • Profit Center Master Data transfer via ALE (ke77) == Additional fields

    Hi SAP Community,
    I am using ke77 to transfer Profit Center Master Data. We have introduced an additional field in the master data which is unfortunately not transferred via ke77 (non SAP std field). Do you guys know how to include user-defined fields via ke77 (user exit, etc...)?
    Thanks in advance for your support.
    Cheers,
    Chris

    you must not create all segments in the IDOC  if you dont want the views.
    e.g. E1MBEWM is used for the accounting data. without this you wont get that view.

  • How to hide field in profit center masted data?

    Hi,
    I would like to know how to hide the field segment in profit
    center master data
    Alternatively I would like to know which user exit used
    to prevent the feeding of the field segment in profit center
    master data.
    Thanks in advance,
    Osvaldo
    Edited by: Osvaldo Cavagnero on Mar 4, 2010 1:43 PM

    Dear,
    Try de-activating the indicator through
    SPRO>Financial Accounting(new)>GL Accounting (New)>Preparation for productive start>Migration of existing SAP Data>Additional Activities>Make settings for segment and segment derivation.
    Maintain Segment.
    Hopefully it has to work.
    Regards,
    Syed Hussain.

  • Profit Center Master Data- Segement need to be changed

    Hello Gurus,
    We have somehow set wrong segment in Profit Center Master Data, We need to change the segment. Transction is posted to the profit center what is the easy way out to change the segment for profit Center master data?
    Any help will be apreciated? i have gone through the SAP Note
    940721  - KE52: Segment in prof center master record cannot be changed
    Or a work around solution.
    Thanks
    Prasad

    Hi Prasad,
    As you already find out, once there is transaction data on a profit center, the segment field is no longer changeable in order to prevent inconsistencies and incorrect result from the segment reporting point of view. This is standard system behaviour!
    You can try with the the following *Notes. It will provide further corrections relevant for your issue.
    *Notes:1373616    Segment in profit center changed despite transaction data
                1037986    KE52: Changing the segment in the profit center master data
    Regards
    Eugene

  • Profit Center Master Data - Validation - User Exit

    Hi,
    I need to add few validation to the profit center master data. If there is any user exit that I can use or is there any validation like OB28 (we have for financial accounting document) that can be used.
    Please help me out.
    Regards,
    Binay Agarwal

    We are on version 4.6C. Requirement is that while creating profit center, two fields, Budget Holder and CC Board Member field should be updated via some valid user id that exist in SAP.
    This user id would be used in work flow. This fields are free field and would accept anydata. But subsequent processes would be hindered. Same thing has been implemented for Cost center and we were able to get hold of user exit but I am struggling to find the same for profit center.
    As far as I am aware there might not be any user exit for KE51 tcode. Now only point is is there any other way (like validation) which can be setup before the data us saved so that we have control over the data being saved in these two fields.
    Regards,
    Binay Agarwal

  • Field Status for cost center master data!

    Hi friends,
    can anyone please tell me,
    Where do we define, which field is mandatory in cost center master data
    regards

    Good afternoon Rohan,
    To do that :
    IMG or transaction KM1V.
    Create a variante with attributes.
    You can also define time based fields in transaction OKEG
    Valérie
    Message was edited by: valerie secondy

  • Load for Profit center Master data Fails?

    When i am trying to load profit center master data the load fails with this error message
    ZCONTENT : Data record 1 ('00100000000666 '): Version 'Arcade ' is not valid     
    ZCONTENT : Data record 59 ('00100000001055 '): Version 'Simulation ' is not valid
    YYBRAND : Data record 87 ('00100000001084 '): Version 'Alter Echo ' is not valid
    YYDEVMENT : Data record 103 ('00100000001100 '): Version 'Externally developed ' is not valid     
    Like these errors i have so many data records failed. Please suggest me how to resolve this issue.

    Hi Naga,
    Looks like the input data needs to be corrected. See if the messages are coming from:
       a) Update/Transfer rules?
    if you are loading from a flat file...preview and check all the field values in the relevant records (1, 59, 87, etc...)
    Good luck, BB

  • Restricting Creation/Update of Profit Center Master Data through KE51/KE52

    Hi,
    I have a scenario where profit center master data is maintained in MDM which acts as central repository and the master data is syndicated from MDM to ECC through PRCMAS IDoc. Business requirement is that since MDM is acting as central repository creation/update for profit center through transactions KE51/KE52 should be restricted in ECC. I know that through roles we can restrict user to create profit centers but is there any way/configuration steps which we can perform to restrict user to create profit centers through transaction and I also want to know if that process would affect the creation/updation of master data through PRCMAS IDoc.
    Thanks,
    Amit

    Hi,
    As I told you can go forward using SetID but for that you have to create the SET than assign it to a table and also have to cutomize a standard FM.
    Meanwhile I will tell you a easy way you can opt for Transaction Variant usinh SHD0 where dont give the option to save so that no user can create any Profit Centre and than assign that Tcode to the users.
    Its a simple way hope it helps you.
    Thanks
    Arbind

  • How to make the Deprtmnt field in the cost center master data as required ?

    Dear Experts,
    I want to make the Department field in the cost center master data as required field.....how do i do it?
    regards
    Suresh

    Hi Eli,
    Thanks for the quick reply
    while creating the Cost center itself the field should come as required field........can that be met with this enhancement?. Because the transaction code being used int the enhancement is for change mode but i want this feature in  create mode itself.
    thanks
    regards
    Suresh

Maybe you are looking for

  • How to setup an email account which has different outgoing server

    I have my work email and I do not know how to set it up on my iphone, the email server is in another country and i should set it up to login to that server to send and receive my email, on outlook i can set it up by using the advace setting to put th

  • DESK TOP AGENT ISSUE

    Hi everyone We have a company and one department is used for their contact center space Problem they are facing is when an agent takes an external call and then transfers it to an internal user the call seems to stay in their que and stops them from

  • MSS-mySAP ERP 2004-PCR- Processing exception during a "Render" operation

    HI, When i navigate to the Personnel Change request,select an employee and select the scenario,say promotion,i get the error: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Error during call to AdobeDocumentServer: Processing exception

  • How to make Panasonic AJ-D230H deck work with Premiere CS3?

    I've got a Panasonic AJ-D230 DVCPro deck with a Firewire board, and I'm trying to export to tape from Premiere Pro CS3 via Firewire, but it will not export audio whatever I do. It will export video, and I can capture both audio and video using the de

  • How to use ISR Forms?

    Hello Gurus, We have ECC6.0 and I see in config under "Internet/Intranet Services" SAP has defined various scenarios and provided the forms. We are interested in a few scenarios that have the adobe forms. We have adobe designer 7.0. Please tell me ho