Making some progress!

Hey guys, I've made some progress today and thanks all of you for your support. I intend to post a full report on what worked and what didn't once my task is complete. Meanwhile can someone please tell me what causes the error message (Premiere Pro has encountered an error) with a red X next to it
and the script reads: [..\..\Src\AudioRender\StackAudioBuffer.cpp-58]
Thanks!

[..\..\Src\AudioRender\StackAudioBuffer.cpp-58]
This would indicate a problem with your Audio. That might not be the only problem, but it is apparently bringing PrPro down.
Harm has posted a link to basically a "worksheet." Filling in the details there will go a very long way to helping us help you.
This ARTICLE says some of the same things, with a few variations. It might be of use too.
Good luck,
Hunt

Similar Messages

IMac Black Screen, making some progress with the CAPS LOCK key...What???!!!

Ok, super weird situation here. My friend brought me his iMac because when he turns it on, it makes the chime sound, the front light goes on, but the screen stays black.
The first thing I tried (as a former pc user) whas to start pressing the CAPS LOCK ON and OFF to see if the computer froze at some point, but to my surprise, after hitting the CAPS LOCK many times the screen appeared.
Ok, but the white screen with the gray apple was all distorted, the apple with be filled with little rainbow boxes and lines on the whole screen, so I thought, the Video converter might be bad.
But then, when I tried for the third of fourth time, it appeared the same white scren with the gray apple and the progress circle spinning again, but this time it looked perfect, BUT it froze, and it just stayed there.
Thats what I have so far......any ideas? I tried the Controlcommand+PR but it didnt do anything......
Thanks

It appears that the Mac is passing the Power On Start Test which results in the chime advising that the RAM seems OK. But there is something wrong with the boot volume. Try booting from the Install DVD that came with the Mac. In the Utilities menu of the Installer use Disk Utility to Repair Disk. In the left hand list choose the boot volume. On the right hand, in the First Aid pane press the Repair Disk button. Repeat until no repairs are reported.
Dah•veed

In Illustrator, I have a saved artwork, then I'm saving a copy as PDF, as usual. After I keep the AI file open, making some modifications which I don't want to save, so I close the file and click "Don't Save". Even though I clicked that, the file's modi

In Illustrator, I have a saved artwork, then I'm saving a copy as PDF, as usual.
After I keep the AI file open, making some modifications which I don't want to save, so I close the file and click "Don't Save".
Even though I clicked that, the file's modification time is changing.
(The modifications I made are not there, so it's not really saving but why the date is changing then?)
Please find the cause of it! Thank you!

All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

Some progress in converting from Excel 3

made some progress in converting Excel 3
Excel 3 to Excel 98 via maclinks
to numbers no work
in excel showed formulas
saved as csv
planned to unwrap "formula......" in numbers and make fix
translated to unix tr '\015' '\012' < dinotab_7_707 > dinotab_7707out
would not work until
I edited the ""this"" to "this" got rid of double double quotes
full file opened 953 lines
but commas in formulas no longer protected
so got '=if(index(c62' 'c65' not 'if(index(c62,c65....'
used exposed commas to split
I guess I can concat back together

progress ??
Did more editing made this
=IF(C147="brk","D" & ROW(),B146)
into this
=IF(C147=brk,D & ROW(),B146)
loaded as formula into one column
will have to go back and add " to text
and fill down xxx rows
tried to run the first edit c/""/"/ file
using smart quotes turned on
split it into pieces.

Making some words Bold/Underlined of an editable text field in Adobe Form?

I have a a requirement of making some words Bold/Underlined of an editable text field in Adobe Form. I have created a "Text Field" and in "Value" tab as default value I have written the textline and made the field Type as "User entered - optional" so that at runtime user can edit that text. Now they want some words of the whole text line should display as Bold and some as Underlined. Can you please help me to meet this requirement.
Moderator message: please have a look in the dedicated forum for "Adobe Interactive Forms".
Edited by: Thomas Zloch on Feb 15, 2011 5:47 PM

Just an idea, but you might try re-printing that original PDF file to the Adobe PDF printer (saving it as another pdf file, essentially). Then try again to add form fields. (You can copy the form fields you've already created and paste them onto the new file -- just copy and paste while in forms edit mode). A second shot in the dark if the first doesn't work might be to try again, but change the print settings when printing to PDF. I've ready some reports that the dpi setting can have an effect. Maybe go from 600 to 150 and see if that works. Let me know which, if either, of these ideas works.
-Joe

Im having trouble making some changes to our webite. Im using DW CC 2014, 8.1 , HP Pavillion pc. Id be happy to pay someone to help.

im trying to make some changes on our website (oilfiltercrushers.com). Im using DW CC 2014, 8.8, HP Pavion pc. The problems include:trying to move an image farther to the left & also to remove too much vertical space, trying to remove "AAAs tht show up on a webpage table even they don't show on the local file that was put, a webpage that I cant see on the website even though it was put & appears in the remote files folder. Id be happy to pay someone to help me fix these problems. Thanx, Paul ([email protected], 4146514636)

Hi Nancy
Thanx for your response and commenting on our homepage. I wasn't aware of the problems you mentioned. However it has ranked on the first page of Google, etc for 20 years, so that's not my concern at this point.
The 2 most immediate things are getting rid of the A"s showing up on the table on oilfiltercrushers/truck_ofc.aspx and on /defaultnew.aspx , (the intended home page when I get it fixed,) I get a server error highlighting line 293
&nsp;
. Im not sure what to do about that...
I hope you can help me with this. If its more convenient, you can call me at 414-651-4636. I'll pay you for your input.
Paul
I look forward to hearing from you.
Paul
"Nancy O." <[email protected]> wrote:
Nancy O. created the discussion
"Im having trouble making some changes to our webite. Im using DW CC 2014, 8.1 , HP Pavillion pc. Id be happy to pay someone to help."
To view the discussion, visit: https://forums.adobe.com/message/7034503#7034503
>

Moving from flash. whats a good starting point to making some mobile Edge apps?

Hi.
I'm coming from a strong Adobe background. I have used flash since the old macromedia days.
I am looking to start making some mobile apps and I'm unsure where to start.
I have brought myself up to speed with Edge and its pretty good.
I want to put something together that has touch screen controls. basically I want to make a couple of buttons that the user can press on their phone, and the buttons trigger a movie clip to play from points on its timeline.
There's so many Adobe products that are out and not out and for mobile and this and that.
Is there a product that I should be using for putting mobile apps like this together? Is Edge what I'm to be using?
I am a new creative cloud member although I am somewhat confused by its offerings, and remain unimpressed with it.
thanks,
John

I think you need search with key "flash for mobile" and read carefull. I hope you will get some good things that you need. Thanks a lot.
Member of @ du học Nhật Bản

HT4623 So I upgraded my 4S phone to IOS6, and when I try to log in to Cloud on the phone, it comes back as wrong password. I tried a dozen times, VERY SLOOOOWLY to make sure I wasn't making some sort of typing error, but noo.

So I upgraded my 4S phone to IOS6, and when I try to log in to Cloud on the phone, it comes back as wrong password. I tried a dozen times, VERY SLOOOOWLY to make sure I wasn't making some sort of typing error, but noo.

hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

Getting error when trying to deploy the SQL project after making some changes

I’m getting the below error message, when I’m trying to deploy the project by making some changes.
In detail, The project was deployed successfully at first time. Later I did some changes(Added 1 more table) and I tried to deploy, but it was not sucess. I'm getting the below error message
Error message:Cannot upgrade the DAC for database CTR_FIN_FINNOTE_DB because the compatibility level is 70 or lower. Alter the database to support a compatibility level of 80 or higher
I checked in SQL, the compatibility level is 110 which is higher than 70.
Can any one help me out to overcome with this.
Regards
Sk.

Try to uninstall you application and then deploy again with the new changes.
jdweng

How to resize JDialog after making some fields invisible?

Hi,
I have many fields in a JDialog box. And I am making some of them invisible (based on some logic).
Even though I am using invisible, the dialog size is not resized automatically.
I can see so much space and it is not good.
Is there any way so that I can resize this dialog?
Regards,
Praveen

Praveen_Kumar_Jayaram_1985 wrote:
But I am not using any layout manager. It is free design. Is there any way to achieve my requirement without using layout manager?But this is what layout managers are made for. Why not use the correct tool for the job? Also, please do not cross-post questions in multiple forums. This will frustrate anyone who tries to help you only to find out later that the same answer was given hours ago in a cross-posted thread. For this reason, many volunteers here and at the other sites refuse to help repeat offenders.

HT204266 i was making some in app purchases and it quit letting me make them and told me to contact itunes support

i was making some in app purchases and it quit letting me make them and told me to contact itunes support

Then contact them by:
Contact iTunes

My Mac Pro Lion 10.7.4 is getting hot, and the fan is making some noise.

Since I've got this Macbook Pro Lion 10.7.4 (October, 2011) the temperature of the backside is very hot, and today (July, 2012) the fan is making some weird noise. Does anyone know what is going on?

Since I've got this Macbook Pro Lion 10.7.4 (October, 2011) the temperature of the backside is very hot, and today (July, 2012) the fan is making some weird noise. Does anyone know what is going on?

Can we get some progress regarding incomplete song play? PLEASE READ

I'm rather desperate to be rid of songs ending early (playing incompletely, skipping, jumping, cutting off, or whatever terminology you want to use). I'm making this post to try to consolidate everyone's complaints and to possibly alert Apple to the issue or bug so that they'll fix it. Hopefully an Apple Host will read this thread.
We've often surmised that the faulty play was because of a firmware issue. After having spent time this evening examining the problem between my iPod and my computer, I'm beginning to believe it's completely a hardware issue -- specifically pertaining to the 1.8 inch hard drive inside the iPod Classic.
Using [aacConverter|http://conglomco.org/aac>, I converted "Three Day Weekend" (which ends at 0:29 on my iPod despite being 4:48 in length), from the external hard drive on which I store my music. That decoded the m4a into aif. Then, using [Audacity|http://sourceforge.net/projects/audacity], I examined the uncompressed file. It looked like this:
!http://home.earthlink.net/~terrancehicks/images/Harddrive_filepic-.jpeg!
As you can see, there's nothing wrong with the file. I played it, and there was nothing wrong -- not even at the 0:29 mark. Then I used [iPodRip|http://ipodrip.com/download> to import files directly from my iPod. After repeating the above process -- aacConverter & Audacity -- I examined the copy of "Three Day Weekend" which is on my iPod. It looked like this:
!http://home.earthlink.net/~terrancehicks/images/CorruptiPod_filepic-.jpeg!
In the 30th second, the wave drops off into some weird pulses for about 30 seconds, after which the audio sounds like the music I'd imported from the CD.
Apparently, something is happening to the file when it is transferred to the iPod's hard drive. Because removing the music and replacing it tends to fix the problem, my thought is that the hard drive has bad sectors that corrupt the data iTunes attempts to put there. I've only examined the waveform of a couple of the broken songs I imported from my iPod (iPodRip is shareware and limits the number of songs one can "rip" from the iPod without buying it), but there appears to be a pattern to the corruption -- around 30 seconds.
However, I have identified three iTunes Store songs with a break, and though I can't convert them or view their waveform, I can listen to them (with QuickTime Player), and their pulses sound different from those of the unprotected files.
So, given this information, can anyone figure out what's going on? (Reimporting songs is unnecessary, but users with much more music would have a reduced chance of having a place to put all of their music without having it riddled with bad sectors, if that's what they are.)

I see two possibilities. The first is that your problem isn't the same as mine. The second is that your method of playing a song from your iPod with iTunes on your computer isn't the same as mine.
I tested the aforementioned song, "Three Day Weekend," from the iPod's drive through iTunes while the iPod was connected to my computer, and once the song reached 0:29, it jumped to the next track, just as when playing the iPod standalone.
The files on your computer hard drive are not technically the same as the files on your iPod. The files on the iPod are clones of the files on your computer (or external drive). As I demonstrated in the OP, a broken file from my iPod has a chunk of data that's different from the original file. I did some more investigating today. Using TextEdit and BBEdit, I examined the "text" of the good file and the corrupt iPod file side by side. They were nearly identical. BBEdit located two differences. The corrupt file was missing 1366 lines of data compared to the good file, and the corrupt file had one line with a whole lot of empty space inserted in the middle of the data that appeared on a line with an otherwise similar appearance on the good file. In the near future I'll upload some screenshots and post links so that anyone can get a closer look at what I'm talking about. (I don't know what it all means.)
In order to check "Three Day Weekend" from my iPod in iTunes, I had to check the button next to "Manually manage music..." Then I expanded my iPod playlists by clicking on the triangle next to the icon of my iPod under DEVICES (it may help if you collapse your regular PLAYLISTS by clicking the triangle next to "PLAYLISTS" so that you won't mistakenly play one of the files from your hard drive). Then I went to my playlist where I track my broken songs and double-clicked on "Three Day Weekend." As I said, it exhibited the same behavior as on my iPod standalone. Mugsy, if you've followed that procedure and had your songs play fine, then your problem is different from mine.
If your problem is like mine but FooBar puts your music on the iPod, then it's not the SAME music that was faulty. The music on your hard drive is fine, but something's happening to it when iTunes transfers the music to the iPod. Because FooBar's transfer doesn't produce "skips," it's unlikely the hard drive has bad sectors. Rather, iTunes is corrupting the files during transfer. Or is it a combination of factors? Some posters have been saying they've been experiencing similar problems since some version of iTunes 7! What could be causing Apple's premier cross-platform software to be mucking up data during transfer? You would think they would want to fix it.

Options for making a progressive subclip from a progressive video?

We have flash files that are streamed using clip offset & duration parameters.
The flash files are later saved to DVD and played there as progressive media.
We hoped to use the same files and subclip parameters for streaming and the DVD.
...But subclips are not supported on progressive media.
Do you have suggestions on best approach?
Options(?):
1) Bite the bullet, chop the original (streamed) file(s) into different files for the DVD which make the play timing look the same in both play modes.
2) Somehow fake streaming from the progressive file to make it look like a streamed file, so subclips will work.
3) Subclass OSMF classes to calculate offset & stop point for progressive media playback (force subcliping). Any examples on this?
Also, is there a reason (besides resource efficiency) that subclips are not supported from progressive media?
Thank you in advance!
Follow-up
This link has an answer to my question of why no subclip support for progressive media
http://forums.adobe.com/message/2511596#2511596
We ended up adding a step to re-transcode the [streamed] video files into multiple smaller exact sized file(s) to enable the same viewing experience from DVD (Option #1)

Also try to output to FLV and embed it into your website (see this thread for some tips). H.264 is certainly also an option, but be aware that it still may cause viewing problems for some users, e.g. crash the browser. Since you are on CS4, you could also do this in Adobe Media Encoder, which will provide some more encoding options...
Mylenium

Making some Characters in PDF Attachment as bold

Hi All,
I have a sapscript output which i am sending as a PDF Attachment.
Though the required characters in Script are BOLD but they are not appearing as BOLD in PDF Attachment.
Please guide me on how to make the characters in the PDF Attachment as BOLD.
I have searched in the forum but could not find any matching solution.
Thanks & Regards,
Bhavika

Please provide me some inputs.
Regards,
Bhavika

Making some progress!

Similar Messages

Maybe you are looking for