Making sound sounds like coming from inside

Hi there,
I am trying to make a sound recorded inside sound like it is heard from outside (in the street). Any suggestion about a good filter?
Thanks,
JCD

You might just try adding some 'street sounds' as audio background. You can acquire sound effects libraries for this or simply take your camera/recorder outside and turn it on...monitoring with headphones for optimum sound. A good mic doens't hurt.
If you have 'roomy' sounding audio...reverb/echo, they'll be a challenge to filter out...hopefully the 'street sounds' will help cover this.
K

Similar Messages

  • Voice over sounds like coming from a toilet paper tube

    OK, I was born in a poverty stricken area of Pennsylvania, and we used toilet paper tubes for toys.
    More self-disclosure than you wanted, but during an interview, the questions did not come out very clear. I used the voice over tool, and the difference between the sound and the voice over is very noticeable. The voice over sounds "tinny" and distant.
    I copied the sound tracks to make it louder and played with the pan and the volume, but to no avail.
    Any suggestions?
    Hank Kearns

    I am using a Logitech USB mic. Perhaps that is
    my problem to.
    OUCH! this made me wince in sympathy pains. what you need for a decent voiceover - i do this in my edit room - are some sound blankets on the floor, a sennheiser me66 in the mic stand pointing down, above and in front of he talent, going into your mixer and then into your vtr or your mac. personally, i go into my vtr and use tape so i can turn off the computers.
    that usb mic isn't gonna cut it!

  • No sound is coming from my HP pavilion dv5 laptop after automatic update

    product name: HP pavilion dv5 laptop
    operating system: windows vista 32 bit home primium
    after automatic update  no sound is coming from my laptop.internal speaker are also not working.also windows starting sound is not coming.i also installed the drivers,update sound drivers but still sound is not coming.please give me perfect solution.

    Hi,
    Can you post back with the full Model No. and Product No. of your dv5 series notebook - see Here for a guide on locating this information.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Today,when i tried to listen music in my iphone 5 ,i noticed that my sound wasnt coming from the speakers but when i plugged earphone ,i listed the sound??

    today,when i tried to listen music in my iphone 5 ,i noticed that my sound wasnt coming from the speakers but when i plugged earphone ,i listened the sound?? i couldnt recognize the problem with my iphone?? really need help!!

    I am having the same problem. I have just tried this. Unplug iphone > open itunes > delete all music from itunes library > close itunes > re-open itunes > add music from original folder > plug in iphone > select songs > press sync > unplug iphone using eject button onscreen > checked phone .... still nothing in music folder on phone. On itunes the "On this iphone" tab the songs remain there but greyed out.

  • Sound is coming from the ear-piece and its really really low

    Title pretty much says it.
    My iPhone is acting really weird ever since this morning, sound isnt coming from the bottom speakers anymore but instead from the ear-piece and its really low.
    I tried resetting the phone with holding down the home and sleep button at the same time but its still the same.
    Anyone else having this problem?

    Connect the headset to a computer or stereo or anything else with 3,5mm minijcack to see if the headset is ok of they work there then your headset is defect if not your phone is the problem

  • Camileo H20 - Sounds like a disc inside

    Hi
    can anybody help please?
    my fairly new camileo h20 wont function and I can hear what sounds like a disc inside of it clicking during charging.
    It stopped working during filming of a very special moment, so not too happy about that. Even less happy about the fact that we cant find the receipt, and also a bit peeved that I cannt view a troubleshooting section as the full manual is on a disc.
    My pc wont play discs (yep, you've guessed it a toshiba...).
    If somebody could please take a look at the manual and make some suggestions, i would be very grateful.
    thanks

    Hello
    Users manuals for your camera you can find under http://eu.computers.toshiba-europe.com/innovation/download_manuals.jsp?service=EU&banner_id=DISCONTI NUED_DOWNLOAD_ARCHIVE
    Download it and look inside if you can find something interesting there.
    Unfortunately I don't have this cam and I cannot help you with this but you can contact nearest authorized Toshiba service provider and ask for help. Make a call, explain the situation and hopefully they will be able to help you.

  • Sound not coming from imac

    I am facing a very strange problem with my Imac. When i am pressing the volume keys on keyboard it is showing muted sign on the screen. No sound is coming from the speakers. Sometimes the muted sign automatically goes and also suddenly display on the screen. But when i am connecting a external headphone sound is coming. So is this a speaker problem or keyboard or any other hardware problem. What is the solution ?

    Your audio settings may have been changed.
    Open Audio MIDI Setup (/Applications/Utilities/), then check the Audio Output setting.
    Change the Audio Output setting to 44100.0 Hz.
    Quit Audio MIDI Setup.
    More info here on no sound from built-in speakers:
    http://support.apple.com/kb/TS1574?viewlocale=en_US
    Or an SMC reset can often cure the problem:
    Resetting the SMC (System Management Controller) on Intel-based Macs:
    http://support.apple.com/kb/ht3964
    Resetting your Mac's PRAM and NVRAM:
    http://support.apple.com/kb/ht1379

  • Creative I-Trigue L3800 Sound Only Coming From Subwoofer

    Hey all.
    Just wondering if anyone has any ideas as to why the sound is only coming through the subwoofer on a set of these speakers I have been using.
    Checked so far:
    Audio Cable connecting PC to Speaker system.
    Sound settings in Windows 7 (balance etc).
    Unplugged all speakers/control thingy etc and plugged back in.
    I am certain the problem is somewhere inside the subwoofer itself as I was watching something the night before they seemed to 'die'. I literally turned the PC back on this morning to watch something and the sound is now only coming from the subwoofer. I've taken the PCB out of the subwoofer to look for any obvious signs of damage but I'm not an electrician or a speaker expert. The only thing I can see is a slow-blow fuse which looks fine, and I'm guessing that if this were the culprit there would be no sound whatsoever.
    Any ideas? Obviously these are an old set of speakers but if there are any diagnostics I can do to perhaps find the cause and fix it, any help would be greatly appreciated as I currently have no decent device to play sound through.
    Thanks in advance.

    mattbell_5,
    Have you try using headphone on the laptop headphone jack and make sure that's working. If possible try plugging the speaker to another audio device like a MP3 player headphone jack and see whether the speaker is working properly.
    Jason

  • I hear a sound like clock pendulum inside my mac pro, not a time related, everything else looks great, could anybody help please?

    Hi all, i am hearing a sound inside my Mac Pro over 2 months before, on both power and battery, not a time specific, i hear a "tictac" sound like Wall Clock Pendulum, beneath the keyboard, i can feel it my hand while typing, it is very clear, could anybody of help please?

    Start your MBP with the StartupManager:
    http://support.apple.com/kb/HT1310
    You should see two HDD icons.  Select the recovery partition (on the right).
    From the 4 option menu select Disk Utility,
    Select Disk Utility>First Aid, and run Verify and then Repair.
    This should tell you if there are any issues with the HDD.
    Do backup your data if you value it.
    Ciao.

  • Audio problem; can't seem to control where the sound is coming from!

    Good day!
    I am currently trying to set up a VERY basic "two camera shoot" using my built in iSight, and a Sony DCR-TRV315 Digital-8 w/FireWire camcorder.
    (I know, I know; I'm breaking all sorts of rules using such unmatched cameras. I'm a terrible videographer.)
    I'm NOT capturing from tape, however. I'm just using the lens of it to get a different shot. By just plugging it in, iMovie recognizes it, just as it would a FireWire webcam, and allows me to capture straight to the hard drive.
    To record audio, I'm using a Griffin iMic (USB preamp) with a Sony lavaliere mic.
    I have, of course, selected the iMic as the device for sound input in Sound Preferences.
    When I set the input camera to the built in iSight, the iMic kicks in and the lavaliere works like a dream. However; when I switch to the Sony camera, the iMic seems to get overridden, and the Sony camera's built-in mic kicks in! And the Sony camera isn't even IN the "choose a device for sound input" box in Sound Preferences!
    Is there any way to record JUST the video from the Sony DCR-TRV315, and keep the audio coming in from the iMic? I can't seem to find an audio preference that would control this, like you'd find in Garageband for example. This is a big problem. The look of the video changes enough between shots; I can't have the sound changing with it!
    Thanks for any help!

    Thanks everyone.
    Unfortunately, I think that M. Dubose is correct; for some reason, it doesn't want to seem to split up the FireWire input.
    The real kicker is that, by using the Griffin iMic along with the built-in iSight, I'm ALREADY getting sound and video from two separate sources. It just doesn't want to let me split this FireWire signal like it will the iSight's video signal/built in microphone.
    If it wasn't for this one thing, the input toggle could work quite effectively as a basic switcher. Hopefully, in future iMovie builds, the need for an independent iMovie Sound Prefs will be addressed, as that'd likely take care for this whole thing.
    The other issue is that the camera I'm using isn't true DV; it's Sony's proprietary Digital 8 format, which unfortunately, ain't too hot for image quality. That's why I'm hesitant to record to the tape and import. However, the lens and the FireWire port are still very valid, so by recording directly to the hard drive, it should have been fine for my needs.
    Also; the idea of THAT much precise editing in a single-channel software just makes my head spin. Switching inputs between shots would have been so much easier. Ah well. iMovie is a good program otherwise; I guess you just can't expect the world from free software, eh?
    I'll probably test it with a buddy's FireWire camcorder to make absolutely sure that it isn't just some freaky incompatibility keeping me from selecting the audio in of my choice. But I can't say that I'm too optimistic.
    Thanks again, everyone!

  • Sound not coming from blth speakers

    My 3g does not have stereo sound coming from both speakers. If I cover the left speaker when playing an i-tune, there is absolutely no sound coming from the right speaker. Also , my ringtone and speaker phone doesn't seem as lound as it should be, probably related to the above problem. When I use the earpieces the stereo sound is perfect. Does anyone know if this is the case with their phone? I'd like to know before I take it in. Thanks.

    The iPhone 3G only has one speaker, the right side is a microphone.
    glor

  • 27'' iMac making sound like bongos drumming

    f`or lack of a better description my 27'' iMac is making a sound like someone is constantly drumming on bongos.  It will stop for a few seconds and then start up again until I restart the computer. What is this.

    A suggestion across more than a few discussions, says to replace the keyboard.
    If a keyface is stuck down, or the switch faulty inside the keyboard, the audio
    sound usually associated with that function (with sounds on) is what you hear.
    You could try making a new user account and test for this odd sound there.
    If it still exists after a time of use, the keyboard may be OK. Still you may
    have to contact Apple Store and set an appointment with a Genius about it.
    {However those with a background in strange movies have another opinion...
    it's jumanji: we've wondered where it would turn up next.}
    Anyway, you could see if your Mac & k/b is still under warranty; or take it to an
    Apple Store genius bar (with appointment) and ask they check it for you.
    Good luck & happy computing!

  • No sound is coming from the speakers.

    I have a Mac Mini.   All of a sudden my speakers, which have been working for over a year quit. I and bought another set - same issue. I can hear the sound coming from the hard drive.  I've looked at the sound settings but I'm not quite that technical.  Can somebody help?

    If only it were that easy, but thanks!

  • Random sound/noise coming from bottom left of thunderbolt display?

    Hey everyone,
    I bought my Thunderbolt display in September 2012 and it worked well until a month ago. The screen started turning off, and USB and Ethernport ports would stop working from time to time. I took it into Apple and they gave me a new display after being unable to fix the problem.
    But now I have a new issue. There is a sound that comes from the display at random times. It sounds close to, but not exactly, like the sound a Mac makes when moving an item to the trash can. It appears to be comming from the bottom left side of the display.
    I've tried raising and lowering the volume, but that didn't have any effect (sounds the same no mater where the volume is). Even when the display volume is muted, or even sound output is sent to my USB DAC, the display still makes this noise. It can happen once every 30 seconds, or once every 30 minutes. There's no consistancy as to when it ocures.
    I tried connecting my Fiance's MacBook air to my display thinking it may be my Macbook Pro, but the noise still occured.
    I've tried connecting the display power to different outlets and different surge protectors, including a Sine Wave UPS, but neither helped.
    This has been an issue with 2 brand new displays Apple gave me. I'm still using the second display but getting ready to return it for a third. But before I do, I wanted to post a question to see if someone had any other idea on what it could be and to see if this is something I could fix myself.
    It appears to be hardware related, and from my testing it seems to be an issue with the current new Thunderbolt Displays.
    Anyone have any thoughts?

    I have a similar issue. Both output and input sounds are setup to come out of a USB speaker system I have attched to the display USB ports. However when emptying the trash, the sound Macs make when doing so comes out of the display speakers. No options for that sound are available. Very odd. There does not seem to be a relation between the volume control either and the volume of the display, the display is loud, even when my mac system voulme is low.

  • Make stereo voice sound like analog from 70's movies

    Hi, I have a voice over that is recorded in a high quality, normal voice and I would like to make it sound like a voice from 70's movies. Sort of gritty, analog sound. What should I tweak in Soundtrack Pro?
    Here are the examples of the sound I'd like to achieve:
    http://www.youtube.com/watch?v=_K5IEqmrUio
    or
    http://www.youtube.com/watch?v=nP_7ZopT6oM
    or
    http://www.youtube.com/watch?v=BK10bJ3rSjQ
    Many thanks

    If I only had stock STP effects to use, I would attempt this with a combination of EQ, Compression/Limiting, and a tiny bit of Overdrive or distortion.
    Use the EQ to roll off the high frequencies a bit, experiment with compression to get the right punch, and very subtle Overdrive to try to imitate the tape grit.
    Have fun!

Maybe you are looking for

  • Acrobat 9 Pro - Serial Number Problem - 3 Separate Licenses

    I own 3 separate licenses of Acrobat 9 Pro and have owned several licenses going clear back to Acrobat 6.  We have used them on the office computers and home or laptop just as the license authorizes. Recently we had a problem of employees getting con

  • Parametric SQL in JDBC sender

    Hi All, Is there a way to submit SQL statement with dynamic parametr to the JDBC sender? I need to get the current date of the PI machine and use it in the  "where" cluase of the "Query SQL Statement" dynamically in the "Proccessing" tab of the JDBC

  • Transfer of the variable through JComboBox

    Hello people, I have the following question. In the main JFrame class i put on the JPanel JComboBox. Depending on the values i choose with the help of JCombobox, my following program shoud change the behavior, then in one of classes which is called f

  • Check value of Shopping car and PO

    Hi we do have ECS in place with SRM 5.0.- The customer requests a functionality that the SC / PO ist checked upon a limit and in case the value is reached (depending on a customer own defined table) the SC or PO has to be rejected. Do you have any hi

  • Javafx ant task for msvcr100.dll

    I had the problem that the native exe-install package generated did not work. As I read in this forum, it is a problem with the Inno Setup tool, which generates a launcher that fails to load msvcr100.dll on 32-bit machines (if no JRE is installed)! T